replication target versions support vSphere

Similar Questions

• replication with different versions of vSphere vSphere

  After reviewing the matrix of interoperability of products, everything "looks" good, but caring for a second opinion.  See below:

  Environment:

  • vCenter 6 sites
  • PSC external sites
  • Protected site is vSphere 5.5 Update 2 or 3
  • Recovery site is vSphere 6.0 U2
  • vSphere 6.1 replication
  • 6.1 SRM

  Issues related to the:

  Can anyone confirm the support in regards to the different version of vSphere protected and recovery site?

  Are there related shades to have different versions of vSphere protected and recovery site?

  We can successfully failover to the recovery site, reprotect VMs to protected site and be restored in a site protected without problem?

  Different versions of vSphere are supported to recover protected site and as you have configured, it is recommended to have the new version on the recovering site. The reason for this and be careful about the different versions, has to do with the versions of virtual equipment. VMware ESX can run VMs with earlier versions of virtual hardware, but not later (came out after the version of vSphere). You want to make sure that your virtual machines will run on the host on the recovering site. If you are using a later version of vSphere to recovery, as long as you deploy new virtual machines when running it, or if you do this, you use a virtual hardware version that is compatible with the hosts what was your site protected, you will never come across the problem of trying to recover a virtual machine with the hardware version that is incompatible with vSphere.

  Issues related to the:

  Can anyone confirm the support in regards to the different version of vSphere protected and recovery site? -Yes

  Are there related shades to have different versions of vSphere protected and recovery site? -See above

  We can successfully failover to the recovery site, reprotect VMs to protected site and be restored in a site protected without problem? -Yes (see above)

  Does make sense?

• 5.0 OR REPLICATION OF ESXI 5.0 SUPPORT VSPHERE VSPHERE?

  Hi, I have a question is just to be sure.

  5.0 OR REPLICATION OF ESXI 5.0 SUPPORT VSPHERE VSPHERE?

  Do not know if I understand you, but take a look at the image below and let it me know if it answers your question:

  

• Alert target Version does not support

  

  I have a form which should work with Acrobat Adobe Version 8 and higher.  My version of the target is set at 8.0 and later.

  I have two warning messages: target version does not support the validationState event and target version does not support the postSubmit event.

  When I first open the because I get the error message of the screenshot above.  When you look at events with scripts there not a script associated with both of these.  The error is associtaed with the 6 key, but I have a script for when you click to add instances.

  Is there anyway to remove these elements that give the error?  And is there a way to go to the line 9419?

  Thank you

  You can send the form to [email protected] and I'll have a look when I get the chance.

  Paul

• ATTENTION: Target Version does not support the Option of role of subform

  Hello

  So I created a pdf file in which I defined fields called Total1, Total2 total 3...

  Now, ultimately as Grand Total, I am adding all those providing this command under calculate:

  this.rawValue = (Total1.rawValue + Total2.rawValue)

  while I do this, the Grand Total don't watch anything and warning message comes at the botton.

  Description: Target Version does not support the option of role of subform.

  Type: Target Version

  Supported by: Reader 7.0.5

  I would really appreciate if anyone can help on how to solve this problem

  You can send the form to [email protected] and I'll take a look?

  Please include a description of the problem in the email.

  Paul

• SRM requires the same version of vSphere in both places?

  We need to quickly implement SRM, I know that is not the way to do it, but it is a decision that I am not charged. We will use SRM 5.1.  I have not read the documentation of SRM totally still, but I hope someone can answer me this:

  Do we need to run the same version of vSphere in both places?

  Site A (Production):

  -vSphere 4.1 (updated anything) Enterprise - because our material is NOTon the compatibility list for something more recent

  -vCenter 5.1 - Let's fix our current server vCenter Server 4.1 to 5.1

  Site B (DR):

  -vSphere 4.1 U2 (or newer) company - this material is NOT identical to that site but is compatible with 4.1 U2 thru 5.1

  -vCenter Server 5.1

  We have here a viable solution?

  Thanks for the help.

  You're right that MRS requires 3rd party replication or VMware vSphere replication (or you can use the two together).  SRM itself doesn't replicate anything, she orchestrates and manages the recovery of virtual machines protected by these other mechanisms.

  If you do not have the option of replication of the table, then you must use vSphere replication.

  VR, however, is a function of the ESXi core appeared in 5.0.  He is by nature a part of the hypervisor itself, so he needs to a 5.x or higher host to use, it's is not an authorization to issue at all.

  To use VR, you will need the hosts on both sites to use 5.x - site source must 5.x use the Filter/agent in the core that produced the data from the replica.

  My * personal * take on it's you would be best served to stand up for VC 5.1 on both sites, and then upgrade your hosts to 5.1, and then deploy appliances virtual RV (used to manage replication and register the service with VC), can protect certain virtual machines so that you get used to the behavior of VR, then put the RS on top (5.1 on the two sites) and start building protection of groups and the stimulus packages and others.

• VMmark 2.1 can support vSphere 5.0?

  Dear Sir.

  VMmark 2.1 can support vSphere 5.0?

  VMmark 2.1 still usable with vSphere 5.0 for submission?

  Will there be a new version of VMmark for vSphere 5.0?

  Thank you and best regards,

  Tree Chang

  Chang of the tree, you are welcome.

  The patch should be applied to submit VMmark 2.1 on vSphere 5.0.

  Interface changes have been made in ESXi 5.0, so the patch is needed to collect run reporting for presentations on ESXi 5.0. The patch is very fast and easy to apply and can be downloaded here:

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vmmark/2_0

  Rebecca

• Which version supports the application cache?

  Which version supports the application cache?

  BB7 and OS 10 supports the storage cache app offline.

• Difference between different versions of vSphere

  You want to know the differences between the different versions of vSphere. If anyone can share entries.

  Thank you!

  Go over with below the article for an overview of the differences for vSphere 5.0, 5.1, 5.5, 6.0.

  http://vmwareinsight.com/tutorials/2016/4/5798820/difference-between-vSphere-5-0-5-1-5-5-and-6-0

• Make sure that the products/versions supported are present in the MXI file or CEP manifest when you transfer the zxp to Adobe Exchange

  Hi all

  I was faced with this problem for a long time.

  When I'm uploading my Extension for first pro CC Panel, I get this message from Adobe Exchange.

  Problems have been found with your submission.

  Once you have made the following changes, you can click the Edit (pencil) and re-download your ZXP.

  • Make sure that the products/versions supported are present in the MXI file or a CEP manifest file

  I added

  < Products >

  < produces maxversion = "9.9" name = "First" primary = "true" version = "7.0" / >

  < / product >

  In my mxi file and the ZXP is install correctly in Premiere pro versions CC, 2014 and 2015.

  But when I upload the same ZXP his shows this error.

  When I changed the label of products with details of the document Adobe Exchange forum to test different scenarios [https://www.adobeexchange.com/resources/7#packman]

  < Products >

  < produces maxversion = "8" name = "InDesign" primary = "true" version = "8.0" / >

  < / product >

  ZXP is getting downloaded on Adobe Exchange.

  
  

  Can anyone suggest what to do to download my package with support for Premiere pro zxp versions 7.0 to 9.9?

  
  

  Thanks in advance,

  ANOOP NR
  

  
  

  Thank you watchwithi28270883! I was facing this problem for quite a while now.

  Your solution worked for me also!

• All the version of vSphere client...

  Dear team,

  Once we open the vmware.com website and I want to see or download all versions of vsphere client then where to click, as i open thepagewhere I m able to see or download all versions of vsphere client.

  Can someone help me please on the same.

  concerning

  Mr. VMware

  Hello

  is that what you are looking for?

  http://chall32.blogspot.de/2011/10/VMware-vSphere-client-download-URL.html

  Frank

• Lowered target Version 9.0 or later form and now the validation messages are appearing, even when the Show Messages dialog box is set to "do not display any message boxes at all."

  Hi all:

  I went a form target version of "10.0 and higher" to "9.0 or more ' and now I get messages from automatic validation of Adobe to appear, even when the Validation of the form of the document is set on"don't show all the message boxes at all."

  Any thoughts?  I have listed some other form to 9.0 and higher and the same setting form Validation works "do not want to display all message boxes".

  The only thing I can think is the decommissioning of 10.0 to 9.0 or more did something?

  Thanks in advance,

  Brian

  without knowing what the errors are, it is difficult to say what the problem is. Forms are usually not popups unless you use FormCalc. Then, the software is displayed a FormCalc error.

• Version of VSPHERE HA Agent

  Hello

  I'm looking for wich version of vsphere HA agent runs on 4.1 ESX / ESXi 4.1 ESXi 5 years?

  If you use vCenter 5 and more, HA (fdm) agent connects to fdm.log who should be under/var/run/log (ESX 5 and more) or/var/log/vmware/fdm (on the former hosts). In the eyes of newspaper for a line that starts "Section for VMware Fault Domain Manager '-which will include the version.

• .ovf created on vsphere deployed 5.0 on the old version of vsphere

  Quick question, someone each deployed an ovf file that was created on 5.0 in an older version of vsphere.

  We do this in the future.  So, it's a pre-emptive question to see if anyone had to do this or any issues that may arise.

  Thank you

  Hello and welcome to the communities.

  Check out this discussion.

  Good luck!

• Download an older version of vSphere

  Hello

  I need to download an older version of vSphere, version 5.0.0 515841. However, the only version I see availabe on vmware.com is update 1.

  Thank you

  Fergus

  You should be able to download build 469512 and then apply updates to build 515841.