Report alert clear database Service of Cluster Management as being down

Similar Questions

• SINGLETON on POLICY MANAGES the database service. 11.2.0.3

  Hello people.
  
  I was faced with a simple creation of SINGLETON SERVICE to an existing base of managed policy on a 11.2.0.3 cluster with two nodes without success so far.
  
  Definition of the environment:
  -Node cluster two 11.2.0.3
  -Several databases (not important I think) all configured with the same SERVER POOL
  -Each database consists of two instances, each one running, one of the nodes form
  -Pool one server only
  
  Requirement:
  -Databases (DB) with its two instances a need a SINGLETON service performed in one of the servers (Server A).
  -If the instance so that the database running on one down, I need the tilt function to Server B.
  
  Result:
  -Failover does not work
  
  Official notes, I checked and tested in vain (among many blogs and forums):
  gR 11, 2 (11.2) RAC TAF Configuration Admin and policy managed databases ID 1312749.1
  Services Database 11 GR 2 of 'Policy' and 'Administrator' managed database ID 1481647.1
  
  Details of all the different components:
  
  Configuration of the database

  B@/u01/oracle> srvctl config database -d DB
  Database unique name: DB
  Database name: DB
  Oracle home: /u01/oracle/product/11.2.0.3
  Oracle user: oracle
  Spfile: +DATA/DB/spfileDB.ora
  Domain: 
  Start options: open
  Stop options: immediate
  Database role: PRIMARY
  Management policy: AUTOMATIC
  Server pools: dev
  Database instances: 
  Disk Groups: DATA,FLASH
  Mount point paths: 
  Services: DB_srv
  Type: RAC
  Database is policy managed

  Status of the database

  B@/u01/oracle> srvctl status database -d DB
  Instance DB_2 is running on node B
  Instance DB_1 is running on node A

  Pool of server configuration

  B@/u01/oracle> srvctl config srvpool -g dev
  Server pool name: dev
  Importance: 0, Min: 0, Max: 2
  Candidate server names: A,B

  The service configuration

  B@/u01/oracle> srvctl config service -d DB
  Service name: DB_srv
  Service is enabled
  Server pool: dev
  Cardinality: SINGLETON
  Disconnect: false
  Service role: PRIMARY
  Management policy: AUTOMATIC
  DTP transaction: false
  AQ HA notifications: false
  Failover type: SELECT
  Failover method: BASIC
  TAF failover retries: 10
  TAF failover delay: 2
  Connection Load Balancing Goal: LONG
  Runtime Load Balancing Goal: NONE
  TAF policy specification: NONE
  Edition: 
  Service is enabled on nodes: 
  Service is disabled on nodes:

  The service status PRIOR to one of the instances is broken

  B@/u01/oracle> srvctl status service -d DB
  Service DB_srv is running on nodes: A

  Service status AFTER on instance is arrested

  B@/u01/oracle> srvctl status service -d DB
  Service DB_srv is not running.

  Tnsnames entry

  DB_srv =
    (DESCRIPTION =
      (ADDRESS =
       (PROTOCOL = TCP)
       (HOST = cluster.dev.sabre.com)
       (PORT = 1521)
      )
       (CONNECT_DATA =
        (SERVICE_NAME = DB_srv)
       )
    )

  Let me know if you need further details.
  Any help will be greately appreciated.
  Thank you
  Alex.
  
  Published by: attitude Sep 19, 2012 21:26

  Hello

  you kill the instance or has he stopped?

  If you stop it then it is planned. You must move the service first.

  If the instance is aborted abnormally (or the server is killed) it should failover.

  Concerning
  Sebastian

• Earphone is not upward or the database service is not registered with her

  Hello

  I'm new to the world of the oracle. Newly installed oracle DB 11 g. I tried to start dbconsole his failure. So I looked in Google additional suggestions on the order of RECREATE EM REPOSITORY .emctl stop dbconsole went successfully.

  but when I tried to run emca - deconfig dbcontrol db error listener is not to launch or database service is not registered with it below is the log

  tail - n 20 /u01/app/oracle/cfgtoollogs/emca/ORCL/emca_2014_06_05_09_07_17.log

  at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)

  at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)

  at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)

  at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)

  June 5, 2014 perform 09:07:37 oracle.sysman.emcp.EMConfig

  SEVERE: Earphone is not upward or database service is not registered with it. Start the listener and register the service of database and rerun the wizard of Configuration of EM.

  See the file journal at /u01/app/oracle/cfgtoollogs/emca/ORCL/emca_2014_06_05_09_07_17.log for more details.

  June 5, 2014 perform 09:07:37 oracle.sysman.emcp.EMConfig

  CONFIG: Stack Trace:

  oracle.sysman.emcp.exception.EMConfigException: listener has not elapsed or the database service is not registered with it. Start the listener and register the service of database and rerun the wizard of Configuration of EM.

  at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)

  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:203)

  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:157)

  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)

  at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)

  at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)

  at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)

  at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)

  Oracle.sysman.emcp.EMConfig 5 June 2014 RestoreOuiLoc 09:07:37

  CONFIG: Restoration of oracle.installer.oui_loc to /u01/app/oracle/product/11.2.0/db_1/oui

  [config oracle@gds-bgl-oradb] $ tail-f /u01/app/oracle/cfgtoollogs/emca/ORCL/emca_2014_06_05_09_07_17.log

  at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)

  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:203)

  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:157)

  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)

  at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)

  at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)

  at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)

  at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)

  Oracle.sysman.emcp.EMConfig 5 June 2014 RestoreOuiLoc 09:07:37

  CONFIG: Restoration of oracle.installer.oui_loc to /u01/app/oracle/product/11.2.0/db_1/oui

  IG] $

  
  

  [oracle@gds-bgl-oradb db_1] $ cat network/admin/listener.ora

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = gds-bgl-oradb)(PORT = 1521))

  )

  )

  [oracle@gds-bgl-oradb db_1] $ cat network/admin/tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  LISTENER_ORCL =

  (ADDRESS = (PROTOCOL = TCP) (HOST = gds-bgl-oradb)(PORT = 1521))

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = gds-bgl-oradb)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl.cisco.com)

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@gds-bgl-oradb db_1] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on June 5, 2014 09:30

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date June 5, 2014 08:55:04

  Uptime 0 days 0 hours 34 min 56 s

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/GDS-BGL-OraDB/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = gds - bgl - oradb.cisco.com)(PORT=1521)))

  Summary of services...

  Service "ORCL" has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  Service 'orclXDB' has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  The command completed successfully

  Please help me.

  You create the password with passwd file utility with the key.

  for the normal user login try one account other than sys (HR, System...)

• Unable to connect to the Cluster Manager

  Hi friends,
  
  When I want to start my oracle database:
  
  sqlplus/nolog
  
  connect sysdba virtue
  
  startup
  
  ORA-29701: unable to connect to the Cluster Manager
  
  It is a unique database, which is the Cluster Manager? How do I start?
  
  Thank you for any response

  then mark answer as CORRECT

• ORA-29702: an error has occurred in the operation of Service of Cluster Group

  Hello
  
  After closing down a knot trying unsuccessfully at the start of this node:
  
  SQL > startup
  ORA-29702: an error has occurred in the operation of Service of Cluster Group
  
  I got this message.
  
  Here is a log of file: orcl2_lmon_13886.trc
  
  */Oracle/admin/ORCL/bdump/orcl2_lmon_13886.TRC*
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
  With the options of partitioning, Real Application Clusters and Data Mining
  ORACLE_HOME = / oracle/DB
  Name of the system: Linux
  Name of the node: DB2
  News Release: 2.6.18 - 53.el5
  Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
  Machine: x86_64
  Instance name: orcl2
  Redo thread mounted by this instance: 0 < none >
  Oracle process number: 5
  The Unix process PID: 13886, image: oracle@DB2 (MON)
  
  :() 2008-12-19 10:08:26.214 SERVICE NAME *.
  SESSION ID: (1102.1) 2008-12-19 10:08:26.214 *.
  21522 GHG 8 resource pool
  GHG enqueues 33158
  GES CPI: Receivers 3 shippers 3
  GES CPI: Buffers receive 1000 Send (i: 2750 b:1934) reserve 1000
  GES CPI: Msg 408 lot 8192 regular size
  Factor of batch processing: enqueue replay ack 201, 224
  Factor of batch processing: cache size 126 by 64 lock replay
  kjxggin: receive buffer size = 32768
  clsc_connect: (0x1d19a030) no listener to (ADDRESS = (PROTOCOL = ipc) (KEY = OCSSD_LL_db2_crs))
  * 2008-12-19 10:08:29.819: CSSCLNTclsssInitNative: connection failed, rc 9 *.
  kgxgncin: SATC init failed with status 3
  kjxgmin: kgxgncin failed - (2)
  kjxggin: generic group layer init fails
  2008-12-19 10:08:29.819 *.
  Stopping the queue Service global
  2008-12-19 10:08:29.820 *.
  enqueue global service detach CM:pid = 13886
  
  I did check the listener, it didn't work, but I start it:
  
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  Alias LISTENER
  Version TNSLSNR for Linux: release 10.2.0.3.0 - Production
  Start date December 19, 2008 10:49:42
  Uptime 0 days 0 h 3 min 55 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP ON
  Parameter Listener of the /oracle/DB/network/admin/listener.ora file
  The listener log file /Oracle/DB/network/log/listener.log
  Summary of endpoints listening...
  * (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521))) *.
  The listener supports no services
  The command completed successfully
  LSNRCTL >
  
  Could you give me a guide how to start this node? or where is a problem?

  Before the start of the database, you can, you must start the CRS.

• Database service starts does not automatically

  I've set up a new service of database on a cluster of 3 nodes running 11.1.0.6 and I can start service manually without any problem, but if I bounce the database, the database service does not automatically start even if the database is running - what is the procedure to make sure that the service starts automatically with the database?
  
  Thank you

  short answer - service_name parameter. Longer answer as well as a very useful document is at http://www.ardentperf.com/pub/services-schneider07.pdf

  illustration

  SYS @ DB10G >SHOW PARAMETER SERVICE_NAMES
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  service_names                        string      db10g
  SYS @ DB10G >HOST LSNRCTL SERVICES
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:18
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "db10g" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10gXDB" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "D000" established:0 refused:0 current:0 max:1002 state:ready
           DISPATCHER 
           (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
  Service "db10g_XPT" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  SYS @ DB10G >ALTER SYSTEM SET SERVICE_NAMES=DB10G,MY_SERVICE
    2  ;
  
  System altered.
  
  SYS @ DB10G >ALTER SYSTEM REGISTER
    2  ;
  
  System altered.
  
  SYS @ DB10G >HOST LSNRCTL SERVICES
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:48
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "MY_SERVICE" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10g" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10gXDB" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "D000" established:0 refused:0 current:0 max:1002 state:ready
           DISPATCHER 
           (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
  Service "db10g_XPT" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  SYS @ DB10G >
  

  Niall Litchfield
  http://www.orawin.info/

  Published by: Niall Litchfield Sep 10, 2008 12:42 TO REMOVE the server name.

• Unable to see the Collections in remote desktop Services in Server Manager

  It doesn't seem to be a category for Windows Server for some reason, so I apologize if this is in the wrong category:

  We recently had an administrator leave our of the it group, and he was the one who had set up our fund services / remote server.  Recently, we wanted to deploy another remote application and found that we were not able to see the "Collections" option in the server in remote desktop services manager.  The only option listed is "servers".  However to reactivate the account administrator and the server like him gave us all permissions to see the option of Collections and to deploy another remote application.

  My question would be, this is a policy of setting Group / somewhere that is limiting the other users of the full access to Office services in Server Manager remotely.  I looked everywhere on the server (and google) to see if I could find where this setting is vain.  Any suggestions/help would be greatly appreciated.

  Thank you!
  Heda

  Hello

  Server forums are in an another Microsoft Community to it.

  This community is mainly for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• stopping services in Task Manager

  I need to know exactly what services in Task Manager
  I can stop safely... all the articles I've read, dance
  arround closing down services, but do not say which.
  Help, please... Sharddm

  Hi Sharddm,

  Whay you want to stop the services in the Task Manager?

  Faced with any performance issues?

  You get the error message?

  There is a lot of background services runing and the only way to have them not runing is to hide all microsoft services and disable all the services of part 3 of the system configuration utility.

  Reply back with more information for you to help

• Foglight of Tomcat alert and monitoring services

  Hi all

  We want to follow normal Tomcat7 services and create an alert if the service stops...

  We have configured the Windows agent and added Tomcat services in the properties the agent and creating the rule under the type of topology "Host Service", we do not get listed Tomcat service when we try to reach to the corresponding host...

  Could you pls help us in this regard...

  Thank you

  Guenoun

  Hello

  I just wanted to check if this is related to this topic and if the response here also applies

  http://en.community.Dell.com/TechCenter/performance-monitoring/Foglight-administrators/f/4814/t/19562471.aspx

  Thank you

  Golan

• Unable to connect to the Cloud database Service: invalid Option SP2-0306

  I'm trying to create Java Cloud Service, configured the database and Services of cloud storage, but when trying to create the Service of Cloud Java I get the following error:

  "Could not connect to Database Service of Cloud Computing.  Error details: [SP2-0306: invalid option.] Usage: CONN [ECT] [{connection...: SP2-0640: not connected}]. »

  No idea where I was wrong?

  .. .user had forbidden characters.

• Cloud Computing database service supports data masking?

  Hello

  Cloud Computing database service supports data masking?

  Thank you

  You can use data masking when using hybrid agent for EM (EM 12 c R5) and the creation of a database of high performance or extreme performance levels.

• What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  Thank you in advance.

  Try now

• Database service is put automatically interrupted

  Dear team,

  I am faced with the question with my database Service that is shut down automatically every day.

  "OpenConnection method error."

  Provided is not a valid database connection string

  ' - 2147467259 ORA-12514: TNS: Listener does not currently of service requested in connect descriptor.

  For now, I manually restart every day to run the application.

  Please suggest me the steps to fix / investigate this matter.

  I'm on 11.2.0.2 Enter price Edition on Windows Server 2008R2

  Thank you.

  There might be a backup script that forces the database to stop

  check the other script of scheduled work item

• Database service

  Hello

  I created a database using DBMS_SERVICE basic service. CREATE_SERVICE.

  The environment is a very basic 11.2.0.3.6 single-instance database running on Linux. There is no Infrastructure of grid not installed so no Oracle Restart or using srvctl to create, start, and stop services. It's just an installation single instance RDBMS software and a database.

  My question is how do the database service start to restart the database?

  DBMS_SERVICE. START_SERVICE ('serv_name'); of course, works and if I run this command, I can see that the service appears as registered with the LISTENER.

  After I start the database that I have to run the DBMS_SERVICE. START_SERVICE manually despite service in the SERVICE_NAME and DBA_SERVICES setting.

  I have to use a trigger to start to start the service at the start of the database? How are user created services that are started automatically in a database to single instance in the absence of grid Infrastructure?

  Any input appreciated, thank you.

  Hello

  You can use a simple trigger to start the service.

  create or replace trigger serv_trigger

  AFTER THE START WE DATABASE

  BEGIN

  DBMS_SERVICE. START_SERVICE ('serv_name');

  END;

  Just an FYI, in case you decide to use srvctl - add/edit services with srvctl as changes with DBMS_SERVICE will be always lost unless they are also made with the corresponding srvctl command. Attribute of service changes will take effect immediately starting with 11.2.0.2 when the service is started or changed by srvctl.

  Kind regards

  Suntrupth

• reports in oracle database 10 g 2 .psp

  Hi all
  I want to create .psp (pl/sql ser pages) reports in the database oracle 10 g 2.
  but I am unable to do why because he needs http server (knew through some oracle documentation but not able to understand) where I find this
  first details requirements for .psp files.
  
  Please give me the details step by step .psp files

  extreme wrote:
  I want to create .psp (pl/sql ser pages) reports in the database oracle 10 g 2.

  Horrible method obsolete to develop web applications of PL/SQL.

  Still not sure that Oracle actively supports this technology and products. It has been never used commonly.

  Apex (Express application) is widely used and have been for many years. It is a mature product, powerful enough for the Professional Enterprise web applications (Oracle uses, himself) and yet easy enough for a person to use, without understanding exactly what the web without State Server-based client works, what optimistic locking is and how to deal with the State of security and the session.

  The apex is by default included in Oracle 11 g.

  See {: identifier of the thread = 2495613} for a very recent discussion on this topic.