Earphone is not upward or the database service is not registered with her

Similar Questions

• Error in windows 2003 Standard Edition with Service Pack 2... The server {00024500-0000-0000-C000-000000000046} is not registered with DCOM within the required time.

  Could someone fix for the error below...

  OS: Windows 2003 Standard Edition with Service Pack 2...

  Event type: error
  Event Source: DCOM
  Event category: no
  Event ID: 10010
  Date: 08/08/2012
  Time: 10:00:31
  User: n/a
  Computer: BP1WHIAP011
  Description:
  The server {00024500-0000-0000-C000-000000000046} is not registered with DCOM within the required time.

  Hello
  For assistance on this issue, you can post your question in the Technet Forums.
  http://social.technet.Microsoft.com/forums/en-us/categories/

• Service Acquisition of Image Windows (WIA) suspended at startup. Responding server {81ED811 A1F4E726-8CF1 - 11 d 1-BF92-00600} is not registered with DCOM within the required time.

  Since early April 2010, my computer started to shut down immediately after starting, or at a time later. A lot of system errors and other events have been reported in the error log, which much of this: "the MMTP service failed to start due to the error - the following system could not find the specified file - after 31/2 months, I abandoned this fixation and F11 to restart or reload the system to the original system; Have updated and 135 items updated, installed IE8, WinXP Pro + SP3 and finally my HP Laser Jet printer 5 p. Try to strt the computer a few hours later, but it stops immediately after, within 2-3 seconds; Repeat this several times. Unplugged the printer, the computer began; The error showd 2 journal items, repeated several times. i.e.

  (1) the service Acquisition of Image Windows (WIA) suspended at startup.                                                  (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM ala required timeout.  Can someone help please? I have to go into msconfig and other? I'm tired & patience thereby and the help that I received from the MS Tech Support.

  Help, please! Thank you! HeinrichDS

  Thanks "nass 1" for your support, I will follow Palouk recommendations to update the drivers for the HP product and hope it will be OK.

  I appreciate your help, HeinrichDS

  HeinrichDS

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  This morning when I checked my system log, it was filled with errors, while saying:

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  A quick search of the register revealed that it identifies Windows Management Instrumentation (WMI). I looked, and indeed, he was arrested. When I tried to start it, I got the error message:

  Could not start the Windows Management Instrumentation service on Local computer

  Error 193: 0xc1

  All the help I can find on the subject assumes that the application does not have the required permissions. Nothing has been deliberately changed. I tried to do a restore of the system of the last days at several checkpoints and received messages that it could be done. So, I checked all the required permissions were still in place.

  My operating system is XP Pro SP3 with all updates applied.

  So, I have to say that something broken, perhaps in the framework of an automatic update or another. Now, when I try to run Microsoft Update, it just hangs.

  Maybe there is not enough information here, but I'm looking for more help on troubleshooting. I have the system tools enough to report all the news of trial if necessary.

  Thank you

  Don

  Even if I had run a chkdsk/r on my system disk and he come clean, I have decided to launch a sfc/scannow and found 3 DLLs that were somehow not original. Once these have been restored, the errors have stopped (so far). While it was only 30 minutes, it is the longest, I went all day with no error message. I'm keeping my fingers crossed.

• the server is not registered with DCOM within the required time.

  I use Windows 7 Enterprise Edition (SP1). It works fine while working on it directly. But when I try to make the remote access connection in the machine it is restarted after a certain time (1 hour or more). I found error in the following system logs:

  Log name: System

  Source: Microsoft-Windows-DistributedCOM

  Date: 01/04/2013 18:41:34

  Event ID: 10010

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: xxxxxx.yyyy.net

  Description:

  The server {AAC1009F-AB33-48F9-9A21-7F5B88426A2E} is not registered with DCOM within the required time.

  The event XML:

   

     

      10010

      0

      2

      0

      0

      0 x 80000000000000

     

      10589

     

     

      System

      XXXXX.yyy.NET

     

   

   

      {AAC1009F-AB33-48F9-9A21-7F5B88426A2E}

   

  Hi Varun,

   

  Thanks for posting your question in the Microsoft Community.

   

  The question you posted would be better suited in the TechNet Forums.

  I suggest you to ask your question in the below link:

   

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• works not registered with iMessage, iphone, mac not

  I have a macbook and an iphone 5s

  I pouvez imessage with friend on iphone

  I have peut of SMS with a friend on iphone

  I can't use my mac app Message to do.

  I used to be able to use the mac Message before some sys-update.

  AND:

  We both use ios 9.3, my mac is EI 10.11.4.

  I and my friend has the two permits & login 'apple id' within the Message on iphone.

  I and my friend turned on all counts in the Message "Send and receive"

  I also have their licence in the Message of my mac, same conf

  I tried to connect my iphone and mac out, then connection. or logout / in separately.

  NOW:

  On the Mac, when I choose my friend-A to start an iMessage, his name turns RED.

  If I insist on clicking on send, mac guest "{number} not registered with iMessage" (but is absolutely recommended and use). I can now iMessage to use iphone.

  

  How can solve this problem?

  In addition, text Message Forwarding does not work between my 5s and mac.

  I even WIFI is running, click on the button put on iphone, no prompt code doesn't show on my mac.

  Please someone help, please. And thanks in advance.

  Transfer text messages - no code on iPad or Mac

  Text Message Forwarding confirm code will not show

• SINGLETON on POLICY MANAGES the database service. 11.2.0.3

  Hello people.
  
  I was faced with a simple creation of SINGLETON SERVICE to an existing base of managed policy on a 11.2.0.3 cluster with two nodes without success so far.
  
  Definition of the environment:
  -Node cluster two 11.2.0.3
  -Several databases (not important I think) all configured with the same SERVER POOL
  -Each database consists of two instances, each one running, one of the nodes form
  -Pool one server only
  
  Requirement:
  -Databases (DB) with its two instances a need a SINGLETON service performed in one of the servers (Server A).
  -If the instance so that the database running on one down, I need the tilt function to Server B.
  
  Result:
  -Failover does not work
  
  Official notes, I checked and tested in vain (among many blogs and forums):
  gR 11, 2 (11.2) RAC TAF Configuration Admin and policy managed databases ID 1312749.1
  Services Database 11 GR 2 of 'Policy' and 'Administrator' managed database ID 1481647.1
  
  Details of all the different components:
  
  Configuration of the database

  B@/u01/oracle> srvctl config database -d DB
  Database unique name: DB
  Database name: DB
  Oracle home: /u01/oracle/product/11.2.0.3
  Oracle user: oracle
  Spfile: +DATA/DB/spfileDB.ora
  Domain: 
  Start options: open
  Stop options: immediate
  Database role: PRIMARY
  Management policy: AUTOMATIC
  Server pools: dev
  Database instances: 
  Disk Groups: DATA,FLASH
  Mount point paths: 
  Services: DB_srv
  Type: RAC
  Database is policy managed

  Status of the database

  B@/u01/oracle> srvctl status database -d DB
  Instance DB_2 is running on node B
  Instance DB_1 is running on node A

  Pool of server configuration

  B@/u01/oracle> srvctl config srvpool -g dev
  Server pool name: dev
  Importance: 0, Min: 0, Max: 2
  Candidate server names: A,B

  The service configuration

  B@/u01/oracle> srvctl config service -d DB
  Service name: DB_srv
  Service is enabled
  Server pool: dev
  Cardinality: SINGLETON
  Disconnect: false
  Service role: PRIMARY
  Management policy: AUTOMATIC
  DTP transaction: false
  AQ HA notifications: false
  Failover type: SELECT
  Failover method: BASIC
  TAF failover retries: 10
  TAF failover delay: 2
  Connection Load Balancing Goal: LONG
  Runtime Load Balancing Goal: NONE
  TAF policy specification: NONE
  Edition: 
  Service is enabled on nodes: 
  Service is disabled on nodes:

  The service status PRIOR to one of the instances is broken

  B@/u01/oracle> srvctl status service -d DB
  Service DB_srv is running on nodes: A

  Service status AFTER on instance is arrested

  B@/u01/oracle> srvctl status service -d DB
  Service DB_srv is not running.

  Tnsnames entry

  DB_srv =
    (DESCRIPTION =
      (ADDRESS =
       (PROTOCOL = TCP)
       (HOST = cluster.dev.sabre.com)
       (PORT = 1521)
      )
       (CONNECT_DATA =
        (SERVICE_NAME = DB_srv)
       )
    )

  Let me know if you need further details.
  Any help will be greately appreciated.
  Thank you
  Alex.
  
  Published by: attitude Sep 19, 2012 21:26

  Hello

  you kill the instance or has he stopped?

  If you stop it then it is planned. You must move the service first.

  If the instance is aborted abnormally (or the server is killed) it should failover.

  Concerning
  Sebastian

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• How to start the database services according to eBS 12.1.1 fix already in place

  Migration db eBS 11.5.10.2 9.2.0.6 to new server eBS 12.1.1 db 11.1.0.6.

  Chosen path: db 9.2 improved and migrated to db 11.1 using exp/imp on new server

  After eBS 12.1.1 predict file system db existing 11.1 how to bind db level of applications and to start the Server service.

  AutoConfig completed successfully.

  Can you connect to the database remotely after running AutoConfig from the database and the database listener and successfully? If so, run your script and see if it works.

  Thank you

  Hussein

• Empty blackBerry Smartphones host routing table, will not register with the network.

  I want to apologize if I put this post in the wrong thread.

  So here's the question. I sent a request to my service provider to upgrade several SIM's have Blackberry service added to them. I asked specifically for them to make sure that the SIM card have been set to BES not BIS. The first SIM card I try to register with the network does the following for me. The phone, before I save it with the BES server can call and surf the internet. Once I have sync the phone with the company's server and I go back outside to check on her send and receive these emails, I try to control the internet and it says that the service is not available. I have 3G (Yes capitol) service and I can make phone calls. The host routing table is empty and when I try to save the phone it just says 'sent message' but I never receives the roads. I wiped the phone and repeat the steps with the same result. I contaced the carrier because all the Google search I did pointed to the carrier but they swear the correct plan is attached. Please if anyone can help me it would be greatly appreciated.

  Hello and welcome to the community!

  In fact, he should persist with the carrier. But first try to remove this BB to your BES, then by the ResetToFactory WIPE to remove the it strategy. Then run everywhere with the BB, ensuring that you can do all the activities of BIS (including filling of the HRT) before activating the BES. If it continues to fail, then you must climb the carrier and BIS get work before you activate BES.

  HRT and the functions of BIS should not be affected by BES, unless there is something in your it strategy that does. It is not very likely but it should impact the devices ALL active BES, not one only.

  Good luck!

• I recently spent the hard disks, now I can't use windows update, and many things do not work with her telling me that I have a non-genuine version of windows

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {110E5798-547C-4E16-A39A-50DED349C409} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {110E5798-547C-4E16-A39A-50DED349C409}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-1802398032-3129996896-1938211476Hewlett-PackardHP G62 Notebook PCHewlett-PackardF.1520100426000000.000000 + 00017B93607018400F804090409Time(GMT-05:00) Standard is03HPQOEMSLIC-MPC100100Microsoft Office home and Student 20071244C54B27D4EF38DlJnqGC9Fs8MocD6cCMmFytChMs = 5160342-81602-924-68546 1

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7600.0000-1172010
  Installation ID: 016205689981921686173085639011241993609851718900326893
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: licensed
  Remaining Windows rearm count: 1
  Trust time: 09/11/2012 10:47:30

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 11:9:2012 05:31
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAeqh2tCiMSnBKUf5xvPZkLKSv8k9Gyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-MPC
  HPQOEM FACP SLIC-MPC
  HPQOEM HPET SLIC-MPC
  START HPQOEM SLIC-MPC
  MCFG HPQOEM SLIC-MPC
  ASF!            HPQOEM SLIC-MPC
  SLIC SLIC-MPC HPQOEM
  SSDT PmRef CpuPm

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21730

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• ORA-19870: you try to restore the database on a different host with rman...

  When I try to restore datafile 1 with this script
  
  RUN
  {
  SET up this THAT TIME = "to_date('2012-01-01:00:00:00','YYYY-MM-DD:HH24:MI:SS')";
  RESTORE THE FILE DATA 1;
  }
  
  
  ---------------------------
  ORA-19870: error reading backup total /mnt/hgfs/2012_01_01/o1_mf_nnndf_TAG20120101T050005_7hzm1qc4_.bkp
  ORA-19612: datafile 1 not restored because of missing or corrupted data
  switch to the previous backup
  
  --------------------------
  
  RMAN > RESTORE DATAFILE 1 to this THAT TIME = "to_date('2012-01-01:00:00:00','YYYY-MM-DD:HH24:MI:SS')" Overview.
  
  From restoration to January 10, 12
  using channel ORA_DISK_1
  using the ORA_DISK_2 channel
  using the ORA_DISK_3 channel
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at the 13:11:19 10/01/2012
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 1 found to restore
  
  --------------------------------
  
  RMAN > LIST BACKUP OF THE DATA 1 Summary file;
  
  
  Backup list
  ===============
  S LV TY Device Type delay #Pieces compressed #Copies Tag key
  ------- -- -- - ----------- --------------- ------- ------- ---------- ---
  40969 A DISC 1 1 JANUARY 12 1 no TAG20120101T050005
  
  ----------------------------------
  
  and when I write "backup list '; output is here where I can see datafile 1...
  
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  40969 full 32,28 G DISC 02:07:15 1st January 12
  BP key: situation 28432: AVAILABLE Tablet: NO Tag: TAG20120101T050005
  Part name: /mnt/hgfs/2012_01_01/o1_mf_nnndf_TAG20120101T050005_7hzm1qc4_.bkp
  List of defined backup data files 40969
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  25035430765 full 1 1 January 12 /oradata1/ISPRODDB11/datafile/o1_mf_system_331jc17w_.dbf
  2 full 25035430765 /oradata1/ISPRODDB11/datafile/o1_mf_undotbs1_331jc19r_.dbf 1 January 12
  4 integer 25035430765 /oradata1/ISPRODDB11/datafile/o1_mf_users_331jc1b2_.dbf 1 January 12
  35 full 25035430765 /oradata1/ISPRODDB11/datafile/sap.dbf 1 January 12
  56 full 25035430765 /oradata2/ISPRODDB11/datafile/TBS_UYS05.dbf 1 January 12
  
  ------------------------------
  
  and the incarnation of the list;
  
  RMAN > LIST INCARNATION;
  
  
  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  1 1 ISPRODDB 4210711725 PARENT 1 19 DECEMBER 06
  2 2 ISPRODDB 4210711725 RUNNING 564488 26 APRIL 07
  
  
  I m able to restore all data files but datafile 1 (system) and 3 (sysaux)... I don't know what to do...

  828193 wrote:
  When I put until 2012-01-01 12:00

  From back to January 10, 12
  using channel ORA_DISK_1
  using the ORA_DISK_2 channel
  using the ORA_DISK_3 channel
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at the 15:28:53 10/01/2012
  RMAN-06094: datafile 1 must be restored.

  so, if I want to restore a datafile to 2012-01-01 00:00 I need previous backupset? right?

  Fix.
  Has done restoration work when you set the until to 2012-01-01 12:00?

  Brgds
  Johan

• Archive the log files are not register with oracle 10g are

  Hello
  
  I have oracle 10.2.0 Linux redhat 4. my database is archivelog since that sequence mode no 30
  
  but when I backup all the files in the archives to help newspapers.
  
  

  rman> backup archivelog all delete input.
  
  it backups up from sequence 67 
  
  because.
  
  SQL> select sequence# from v$archived_log;
  
   SEQUENCE#
  ----------
          67
          68
          69
          70
          71
          72
          73
          74
          75
          76
          77
  
   SEQUENCE#
  ----------
          78
          79
          80
          81
          82
          83
          84
          85
          86
          87
          88
  
   SEQUENCE#
  ----------
          89
          90
          91
          92
          93
          94
          95
          96
          97
          98
          99
  
   SEQUENCE#
  ----------
         100
         101
         102
         103
         104
         105
         106
         107
         108
         109
         110
  
   SEQUENCE#
  ----------
         111
         112
         113
         114
         115
         116
         117
         118
         119
         120
         121
  
   SEQUENCE#
  ----------
         122
  
  56 rows selected.
  
  while i left with
  
  [oracle@Oracledatabas ArchiveDest]$ ls
  1_30_694492901.dbf  1_40_694492901.dbf  1_50_694492901.dbf  1_60_694492901.dbf
  1_31_694492901.dbf  1_41_694492901.dbf  1_51_694492901.dbf  1_61_694492901.dbf
  1_32_694492901.dbf  1_42_694492901.dbf  1_52_694492901.dbf  1_62_694492901.dbf
  1_33_694492901.dbf  1_43_694492901.dbf  1_53_694492901.dbf  1_63_694492901.dbf
  1_34_694492901.dbf  1_44_694492901.dbf  1_54_694492901.dbf  1_64_694492901.dbf
  1_35_694492901.dbf  1_45_694492901.dbf  1_55_694492901.dbf  1_65_694492901.dbf
  1_36_694492901.dbf  1_46_694492901.dbf  1_56_694492901.dbf  1_66_694492901.dbf
  1_37_694492901.dbf  1_47_694492901.dbf  1_57_694492901.dbf
  1_38_694492901.dbf  1_48_694492901.dbf  1_58_694492901.dbf
  1_39_694492901.dbf  1_49_694492901.dbf  1_59_694492901.dbf
  [oracle@Oracledatabas ArchiveDest]$
  
  i have backup of archive log as 
  
  RMAN> list backup of archivelog all;
  
  
  List of Backup Sets
  ===================
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ ---------------
  3       136.49M    DISK        00:00:08     27-AUG-09
          BP Key: 3   Status: AVAILABLE  Compressed: NO  Tag: TAG20090827T061019
          Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_08_27/o1_mf_annnn_TAG20090827T061019_59dpwfkb_.bkp
  
    List of Archived Logs in backup set 3
    Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
    ---- ------- ---------- --------- ---------- ---------
    1    37      1530188    18-AUG-09 1549890    19-AUG-09
    1    38      1549890    19-AUG-09 1584124    19-AUG-09
    1    39      1584124    19-AUG-09 1628757    19-AUG-09
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ ---------------
  7       181.96M    DISK        00:00:12     27-AUG-09
          BP Key: 7   Status: AVAILABLE  Compressed: NO  Tag: TAG20090827T222915
          Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_08_27/o1_mf_annnn_TAG20090827T222915_59gj7x0o_.bkp
  
    List of Archived Logs in backup set 7
    Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
    ---- ------- ---------- --------- ---------- ---------
    1    63      2413676    26-AUG-09 2435738    26-AUG-09
    1    64      2435738    26-AUG-09 2472234    27-AUG-09
    1    65      2472234    27-AUG-09 2515317    27-AUG-09
    1    66      2515317    27-AUG-09 2546805    27-AUG-09
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ ---------------
  9       15.94M     DISK        00:00:02     28-AUG-09
          BP Key: 9   Status: AVAILABLE  Compressed: NO  Tag: TAG20090828T001745
          Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_08_28/o1_mf_annnn_TAG20090828T001745_59gpmc0s_.bkp
  
    List of Archived Logs in backup set 9
    Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
    ---- ------- ---------- --------- ---------- ---------
    1    30      1328116    17-AUG-09 1330698    17-AUG-09
    1    31      1330698    17-AUG-09 1343639    17-AUG-09
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ ---------------
  11      104.87M    DISK        00:00:07     28-AUG-09
          BP Key: 11   Status: AVAILABLE  Compressed: NO  Tag: TAG20090828T012913
          Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_08_28/o1_mf_annnn_TAG20090828T012913_59gtsbdk_.bkp
  
    List of Archived Logs in backup set 11
    Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
    ---- ------- ---------- --------- ---------- ---------
    1    31      1330698    17-AUG-09 1343639    17-AUG-09
    1    32      1343639    17-AUG-09 1386340    17-AUG-09
    1    33      1386340    17-AUG-09 1418708    17-AUG-09
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ ---------------
  18      2.44G      DISK        00:03:18     17-SEP-09
          BP Key: 18   Status: AVAILABLE  Compressed: NO  Tag: TAG20090917T002120
          Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_09_17/o1_mf_annnn_TAG20090917T002120_5c3gb2m2_.bkp
  
    List of Archived Logs in backup set 18
    Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
    ---- ------- ---------- --------- ---------- ---------
    1    67      2546805    27-AUG-09 2571963    28-AUG-09
    1    68      2571963    28-AUG-09 2610800    28-AUG-09
    1    69      2610800    28-AUG-09 2647832    28-AUG-09
    1    70      2647832    28-AUG-09 2668839    28-AUG-09
    1    71      2668839    28-AUG-09 2705408    29-AUG-09
    1    72      2705408    29-AUG-09 2749633    29-AUG-09
    1    73      2749633    29-AUG-09 2783675    30-AUG-09
    1    74      2783675    30-AUG-09 2826464    30-AUG-09
    1    75      2826464    30-AUG-09 2860499    30-AUG-09
    1    76      2860499    30-AUG-09 2903504    31-AUG-09
    1    77      2903504    31-AUG-09 2943108    31-AUG-09
    1    78      2943108    31-AUG-09 2977859    31-AUG-09
    1    79      2977859    31-AUG-09 2998785    01-SEP-09
    1    80      2998785    01-SEP-09 3042779    01-SEP-09
    1    81      3042779    01-SEP-09 3086898    01-SEP-09
    1    82      3086898    01-SEP-09 3103245    02-SEP-09
    1    83      3103245    02-SEP-09 3147628    02-SEP-09
    1    84      3147628    02-SEP-09 3192216    02-SEP-09
    1    85      3192216    02-SEP-09 3208480    02-SEP-09
    1    86      3208480    02-SEP-09 3248106    03-SEP-09
    1    87      3248106    03-SEP-09 3294064    03-SEP-09
    1    88      3294064    03-SEP-09 3323611    03-SEP-09
    1    89      3323611    03-SEP-09 3352060    04-SEP-09
    1    90      3352060    04-SEP-09 3399516    04-SEP-09
    1    91      3399516    04-SEP-09 3440740    04-SEP-09
    1    92      3440740    04-SEP-09 3457884    05-SEP-09
    1    93      3457884    05-SEP-09 3485157    05-SEP-09
    1    94      3485157    05-SEP-09 3523208    05-SEP-09
    1    95      3523208    05-SEP-09 3558325    05-SEP-09
    1    96      3558325    05-SEP-09 3600414    06-SEP-09
    1    97      3600414    06-SEP-09 3642729    06-SEP-09
    1    98      3642729    06-SEP-09 3678479    07-SEP-09
    1    99      3678479    07-SEP-09 3720642    07-SEP-09
    1    100     3720642    07-SEP-09 3748794    07-SEP-09
    1    101     3748794    07-SEP-09 3777963    08-SEP-09
    1    102     3777963    08-SEP-09 3823393    08-SEP-09
    1    103     3823393    08-SEP-09 3865230    08-SEP-09
    1    104     3865230    08-SEP-09 3880510    09-SEP-09
    1    105     3880510    09-SEP-09 3906888    09-SEP-09
    1    106     3906888    09-SEP-09 3961086    09-SEP-09
    1    107     3961086    09-SEP-09 3982103    10-SEP-09
    1    108     3982103    10-SEP-09 4034528    10-SEP-09
    1    109     4034528    10-SEP-09 4055556    11-SEP-09
    1    110     4055556    11-SEP-09 4115268    11-SEP-09
    1    111     4115268    11-SEP-09 4128557    12-SEP-09
    1    112     4128557    12-SEP-09 4165104    12-SEP-09
    1    113     4165104    12-SEP-09 4202850    12-SEP-09
    1    114     4202850    12-SEP-09 4258353    13-SEP-09
    1    115     4258353    13-SEP-09 4298900    14-SEP-09
    1    116     4298900    14-SEP-09 4341046    14-SEP-09
    1    117     4341046    14-SEP-09 4365180    15-SEP-09
    1    118     4365180    15-SEP-09 4424992    15-SEP-09
    1    119     4424992    15-SEP-09 4439538    15-SEP-09
    1    120     4439538    15-SEP-09 4489259    16-SEP-09
    1    121     4489259    16-SEP-09 4532807    16-SEP-09
    1    122     4532807    16-SEP-09 4548893    17-SEP-09
  
  
  
  and when i try
  
  RMAN> backup archivelog from sequence 30 until sequence 66;
  
  Starting backup at 17-SEP-09
  using channel ORA_DISK_1
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of backup command at 09/17/2009 04:01:25
  RMAN-20242: specification does not match any archive log in the recovery catalog
  
  
  when i try to restore database on testing server it ask me for
  
  
  
  MAN> recover database until sequence 121;
  
  Starting recover at 17-SEP-09
  using channel ORA_DISK_1
  
  starting media recovery
  
  channel ORA_DISK_1: starting archive log restore to default destination
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=37
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=38
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=39
  channel ORA_DISK_1: reading from backup piece /home/oracle/o1_mf_annnn_TAG20090827T061019_59dpwfkb_.bkp
  channel ORA_DISK_1: restored backup piece 1
  piece handle=/home/oracle/o1_mf_annnn_TAG20090827T061019_59dpwfkb_.bkp tag=TAG20090827T061019
  channel ORA_DISK_1: restore complete, elapsed time: 00:00:17
  channel ORA_DISK_1: starting archive log restore to default destination
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=63
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=64
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=65
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=66
  channel ORA_DISK_1: reading from backup piece /home/oracle/o1_mf_annnn_TAG20090827T222915_59gj7x0o_.bkp
  channel ORA_DISK_1: restored backup piece 1
  piece handle=/home/oracle/o1_mf_annnn_TAG20090827T222915_59gj7x0o_.bkp tag=TAG20090827T222915
  channel ORA_DISK_1: restore complete, elapsed time: 00:00:15
  channel ORA_DISK_1: starting archive log restore to default destination
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=31
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=32
  channel ORA_DISK_1: restoring archive log
  archive log thread=1 sequence=33
  channel ORA_DISK_1: reading from backup piece /home/oracle/o1_mf_annnn_TAG20090828T012913_59gtsbdk_.bkp
  channel ORA_DISK_1: restored backup piece 1
  piece handle=/home/oracle/o1_mf_annnn_TAG20090828T012913_59gtsbdk_.bkp tag=TAG20090828T012913
  channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
  archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_31_694492901.dbf thread=1 sequence=31
  archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_32_694492901.dbf thread=1 sequence=32
  archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_33_694492901.dbf thread=1 sequence=33
  archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_34_694492901.dbf thread=1 sequence=34
  archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_34_694492901.dbf thread=1 sequence=35
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of recover command at 09/17/2009 03:01:31
  RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/home/oracle/DataBaseBackups/ArchiveDest/1_34_694492901.dbf'
  ORA-00310: archived log contains sequence 34; sequence 35 required
  ORA-00334: archived log: '/home/oracle/DataBaseBackups/ArchiveDest/1_34_694492901.dbf'

  My question is why my 30 to 66 sequence archivelog file are not saved with the database in v$ archived_log and how to solve this problem.
  
  Thank you
  Umesh

  You may need to increase the CONTROL_FILE_RECORD_KEEP_TIME value.

  If the archivelogs are still on the disk, you can try to catalog them with:

  RMAN> catalog start with '/home/oracle/DataBaseBackups/ArchiveDest/;
  

  or if you don't need the file you can simply remove the o/s and run the following:

  RMAN> crosscheck archivelog all;
  RMAN> delete expired archivelog all;
  

• I want to host a literature review using the Document Adobe cloud, the cloud service that Adobe offer with the ITAR requirements?

  Some key aspects of the ITAR , making cloud adoption a challenge include:

  • Information and documents related to the USML items can only be shared by "us"people "(unless authorized by the U.S. Department of State).
  • All U.S. suppliers in the USML supply chain must save gets licenses for import/export of the U.S. Department of State.
  • Re-unauthorized transfer or re-export of any article is a major violation of the law - and is tightly controlled.
  • Scope of the regulation includes data that is accessible by individuals empowered us when traveling outside the United States and is then shared with foreign nationals.

  Depending on the scope and definitions in ITAR, data assets and information are considered as exports. That being said, it is generally accepted that ITAR-controlled documents saved in the cloud must be in accordance with the policies and rules of the ITAR. While most of the companies that need to comply with ITAR rules have detailed compliance programs in place on a strict control of documents, security of information, materials and equipment on site (i.e., in their own facilities and data centers), it's a big challenge to maintain the same strict guidelines when the decision is taken to move to cloud infrastructure for critical business needs.

  And regarding the protection of data, authorities said that encryption is not enough-ITAR if applies even to the data encrypted in the cloud if servers are located outside the United States the IOC newspaper recently quoted a State Department official, "there are currently no exemption of license for the use of encryption to store data in the cloud."

  Hi Matthew,

  Please check the details here: http://www.adobe.com/content/dam/Adobe/en/security/pdfs/adobe-ccf-012015.pdf

  Thank you

  Abhishek