Report filter at run time editor

Similar Questions

• In the report previewer of run time, when you click on file-> generate file->

  In the report previewer of run time, when you click on file-> generate file-> RTF, PDF, etc...
  
  I want to disable this option in the report, pl suggest
  
  Kind regards

  Hello
  I guess you are using reports 6i, so in this case, you must pass the following parameter when you run the report
  for example
  DISABLEFILE = YES

  Best regards, RZ

• You will have to give the value of the filter at run time condition.

  Hi experts
  
  I have a requirement in which I need to give the value of the filter at run time, for example Project_code = "XYZ"
  The XYZ value should be given at run time. How can achieve us?
  
  Thanks and greetings
  Frank

  Hi Jos,

  1. create a PROJECT_CODE to say as alphanumeric variable, as non-persistent data type and use it as a filter in your mapping.

  2 drag and drop the variable twice in your package make that as a declared variable and in the second stage that do like Variable refresh then in step 3 of your interface.

  3 generate a script and executing that give scenario the value you desired, press enter once you have given, otherwise it will not fetch the entry and make sure that the LAST VALUE is DISABLED.

  This way you can give values to the varaible running.

  Thank you
  Guru

• Set the name of server report dynamically at run time

  Hi guru,.
  
  I called reports of the forms that I hardcode the name of report server in my code.
  Is there no alternative to set the server name of report dynamically at run time, is how to find the name of the report server and that in through my code as a parameter.
  
  
  can you give some examples of codes... Thank you

  One way that we usually followed before was to store the name of the report server in other tables in the database, then choose this name whenever we want to run a report.

  In this way, it is easy even if there is no change in the name of the server.

• VI LabVIEW Report Generation Toolkit elements in a TestStand sequence does not work with a LabVIEW 8.5 run-time engine

  Hi all

  I'm using LabVIEW 8.5.1 and TestStand 4.1. I did a sequence TestStand with a VI in this document, which uses items Report Generation Toolkit. On my machine I use LabVIEW and TestStand development system license. On another machine I use TestStand with basic deployment license and I chose the LabVIEW 8.5 run-time engine in the Configuration of the adapter. Everything works well except this VI with elements of Report Generation Toolkit. The error message shows that the VI is not executable. It works well only after I installed with a trial license and selected LabVIEW LabVIEW 8.5 development system in the Configuration of the adapter.

  I found other posts and a document in the knowledge base with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument but I am not no EXE files in my sequence, so I do not know how to fix mine. Someone has an idea?

  
  

• CVI 2013 ' FATAL RUN - TIME ERROR: pointer to free memory passed to the function of library "when you access a struct of struct

  #include 
  #include 
  #include 
  
  typedef struct StringsStruct
  {
    char A[10];
    char AA[10];
  
    char B[10];
    char BB[10];
  
    char C[10];
    char CC[10];
  } StringsStructType;
  
  StringsStructType Strings = {0};
  
  char *const SelectedStrings[3] =
  {
    Strings.A,
    Strings.B,
    Strings.C
  };
  
  int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
                         LPSTR lpszCmdLine, int nCmdShow)
  {
    if (InitCVIRTE (hInstance, 0, 0) == 0)
      return -1;    /* out of memory */
  
    strcpy( SelectedStrings[1], "TEXT" );
    /*** FATAL RUN-TIME ERROR:   "main.c", line 32, col 11, thread id 0xXXXXXXXX:   Pointer to free memory passed to library function. ***/
  
    Breakpoint();
  
    return 0;
  }
  

  Any chance to get this working in 2013 CVI?

  "& Strings.A [0]" does not work either.

  Hello CVI - User!

  Thank you for reporting the issue. I filed the bug report # 423491.

  I did have a chance to get rid of the error by changing the definition of the structure, but I was able to get the program running by disabling execution checking when the fields in the structure are initialized:

  strcpy( (char*)(uintptr_t)SelectedStrings[1], "TEXT" );
  

  Or perhaps a more descriptive workaround solution:

  #define UNCHECKED(x) ((void*)(uintptr_t)(x))
  strcpy( UNCHECKED(SelectedStrings[1]), "TEXT" );
  

  Thank you

  Peter

• LabVIEW: error building Installer 2011SP1: LabVIEW Run-Time Engine 2013 missing 3 dependencies?

  I'm having a problem of construction of an installer in 2011SP1 of LabVIEW.

  It has been a while since I tried to build an installer but it used to work properly and building executables still works fine.

  Now when I try to compile the installer, I get "generation failed."

  The possible reasons: error generating preview for my 3.1.7 Application.

  Details:

  Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
  
  CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_InitializeDistribution.vi >> IB_MSI.lvclass:Report_Preview_Error.vi >> IB_Source_Container.lvclass:Report_Preview_Error.vi
  
  Loading product deployment information*** WARNING ***NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing.  Visit ni.com/info and enter the Info Code "" for more information.
  
  ***************** Error: An internal error occurred for which the cause is unknown. (Error code -41)***************** Error Details:Error in MDF API function: _MDFCommon_GetNextLogMessageError in MDF::GetInstance - MDF static instance is not initialized!*** End Error Report**************
  
  Loading product deployment information*** WARNING ***NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing.  Visit ni.com/info and enter the Info Code "" for more information.
  

  The really strange thing is that I'm using LabVIEW 2011SP1, I don't even have installed LabVIEW 2013, not even the runtime.

  Where is the problem? Why is he still complain about LabVIEW 2013? Anyone seen this before?

  Troy,

  This behavior makes me assume that you updated certain components from the past. There are drivers of OR who use LV components (e.g., AFAIK the DAQmx of Test panels).

  Update you things? If Yes, why don't you LV 2013 RTE installed as it would be necessary for full functionality of the driver?

  Norbert

• total run time based on sql id?

  Hello

  I wrote under query to find out the total run time sql and total executions happened based on sql id for each date. Can you get it someone please let me know if the output below is correct?

  SQL> SELECT
    trunc(begin_interval_time, 'DD'),
    ROUND(sum(elapsed_time_delta)/1000000) "Total Execution Time (sec)",
    ROUND(sum(executions_delta)) "Total Execution"
    FROM dba_hist_sqlstat a
    JOIN dba_hist_snapshot b
    ON a.snap_id = b.snap_id
    WHERE sql_id        = '8acg09uq48jzk'
    AND executions_delta>0
    GROUP BY trunc(begin_interval_time, 'DD')
    ORDER by trunc(begin_interval_time, 'DD') DESC;
  
  
  TRUNC(BEG Total Execution Time (sec) Total Execution
  --------- -------------------------- ---------------
  01-AUG-14                        160          122078
  31-JUL-14                       9309         1822147
  30-JUL-14                       6667         1845014
  29-JUL-14                       6196         1873091
  28-JUL-14                     277268         1517005
  27-JUL-14                      78546          794048
  26-JUL-14                       1359         1166650
  25-JUL-14                       7665         1826915
  24-JUL-14                       6786         1907862
  23-JUL-14                       8132         2019695
  22-JUL-14                       6611         1948861
  
  
  TRUNC(BEG Total Execution Time (sec) Total Execution
  --------- -------------------------- ---------------
  21-JUL-14                       7980         2948449
  20-JUL-14                       3226         3554316
  19-JUL-14                       3405         3222148
  18-JUL-14                      10179         2478602
  17-JUL-14                       7950         1972643
  16-JUL-14                       8465         2054012
  15-JUL-14                       8483         2248688
  14-JUL-14                       8644         2243460
  13-JUL-14                        942         1478516
  12-JUL-14                        985         1075398
  
  
  

  Generate AWR report during the period of interest and you will get more information.

  Apart from that, what problem you ar trying to solve. Please explain that

  You can also use the following, because you are looking for particular sql

  awrsqrpt. SQL > for individual ssql

  awrsqrpti. SQL > for sql on a particular instance... (useful in case of CARS)

  Kind regards

  Harman

• Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe

  Hello world!

  I don't know how, but I have a problem when my windows Vista from (running)
  The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
  I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.

  And another question...
  There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.

  It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
  Thanks for the replies, nd sorry about my English :-) skills
  Best wishes from the Bulgaria and have a nice day!

  Post edited by: me

  null

  Hello

  I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.

  Kody is good. Reinstall the VAP and check if this helps solve this problem.

  With regard to the question of the other;
  You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
  However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba page

  You must install all the drivers available if you want to use all the features of the laptop.

  Concerning

• Satellite A200 battery run time

  G ' Day, I have an A200 series PC laptop which is about 2 to 2.5 years, since the original battery died. I bought a new battery - one more (in other words, he had to last longer than the original). The new battery is not completely charged after charging for 6 hours, while the machine stops and only lasts 2 to 2.5 hours on battery. The power settings are balance and I especially don't work only with the word doc and sometimes the media player in the background.
  The original battery (small capacity) used to last 2-3 hours on these parameters.
  The manufacturer said tht, it may be a driver issue any.

  If anyone has had a similar dilemma, and there, anyone know how I could fix this problem apart from return to the manufacturer of the battery?

  Concerning
  Rgtom

  2.5 hour battery run time on the Satellite A200 is OK for me and it's the same as on my Satellite A300.
  I think 2.5 hours DURATION is just average for this model of laptop.

  Can you please tell us exactly what battery you bought?
  Can you send us exact Toshiba part number?

• deploy the run-time engine

  Hello everyone,

  I'm trying to deploy my application of teststand to a target computer. My teststand application uses: TestStand 2014 (32 bit), LV 2014 SP1 (32-bit).

  Here's the problem I encounter while using the deployment tool.

  1. in the attempt to include RTE LV in my Installer, the deployment utility requires that I provided LV 2015 Installer. See the attached picture.

  I wonder why she asked median LV-2015-64 bit Installer. If I ignore the request, the build process failed.

  

  2. I use the shared variable to communicate with the compactRIO controller. The compactRIO controller is hosting EVS. My question is,

  a. I have to "deploy" my variable library shared, even though my system is not an EVS?

  b. I read in the manual that I can deploy the variable Fanny shared through the LV utility deployed the lilbrary step. So I added this step in the test sequence. Whenever I run the sequence, this step deploys the shared variables. On the target, I wonder if it is necessary to deploy the shared variable on each run of the test sequence. I think it should only be deployed only once on the system target. Am I wrong? If so, how to remove this utility LV deploy step of the library of the test on the target sequence, since there is no development testbed on the target system.

  3. I use a database to record test results after each execution of test sequences. I can export the schema of the table data and copy it to the target computer. My question is, how to import the schema of the database in the target table, since there is no system development teststand on it (no way to call configure it-> result-> database to import the schema of the treatment table)?

  I hope that teststand experts out there can give me some help tips to help me understand the whole deployment process. Thank you.

  Yours,

  lhuckj

  (1) make sure that LabVIEW 2015 Run time is NOT slected to install options-> drivers and components

  (2) I don't know

  3.

  Generally, I put my data link in a UDL file and include that in my distribution.  I set the Connection string to use a relative to this udl path and make sure that the UDL is copied to the same location on the targer

  I have also included in my repertoire of the Application of TestStand CFg:

  TestStandDatabaseSchemas.ini

  TestExec.ini

  Users.ini

  StationGlobals.ini (attention if you do not want to replace the existing one, I use it to store the addresses of the instrument)

• I am too blind to find the download of the SP1 2015 Vision Development Module Run-Time?

  Research on ni.com for 'Vision Development Module Run-Time 2015' brings me to a lot of results, but not "Vision Development Module Run - Time 2015 SP1".  Is this product late?

  The Vision Development Module 2015 SP1 has already been published a few days ago.

  Hello Guenter

  I could not find, too and study this.

  As a solution for the moment, you can use the

  Vision Development Module 2015 SP1 - National Instruments
  http://www.NI.com/download/vision-development-module-2015-SP1/5798/en/

  and when asked to choose what features must be installed uncheck everything except the TERM NI Vision 2015 SP1, see the attached picture.

  Best regards

  Kathrin

  Certified LabVIEW Developer (CLD)

• LabVIEW RT and VeriStand run-time license

  Hello

  There is something, I want to clarify.

  VeriStand full development license includes a license to run LabVIEW RT?

  For example, if I intend to run on a desktop PC VeriStand became a target of RT, (as usual) should I buy a license of execution for LabVIEW RT or the run-time license is already included in the package VeriStand?

  I think we need to buy a license of execution in all cases, do you confirm?

  Thanks for your reply, have a good day.

  Kind regards

  After talking with the right people, I can confirm that the licenses Full Dev and operator agree indeed licensed LV RT Runtime (one per license NIVS). The license PC Dev has however not.

  Pardon confusion Da Helmut.

• Can we load and unload the files in the run time?

  Can we load and unload the files in the run time?

  For example, there are four files named 'test1.h & test1.c' and another series 'test2.h & test2.c' (I have attached as an attachment to this post).

  test1.h contains the code:

  int variable; variable declared as integer

  test1.c contains the code:

  variable = 1; variable a value assigned

  test1.h contains the code:

  char * variable. variable declared as string

  test1.c contains the code:

  variable = "EXAMPLE"; a string that is assigned to variable

  So here, in this case can I dynamically load / unload first & second group files so that the same variable "variable" name can be used as an integer and string? And if so, how to do?

  Hi pa1majeti,

  You cannot simply consider that some code is loaded into memory or not: all code in a compiled application is permanently in memory unless you divide your application into DLLs that you dynamically load if necessary and remove if is no longer necessary.

  But as I understand from your description, you're better given the amount of memory occupied by the data (i.e. the contents of the variables) rather than the code. If this is the case, your only option is to allocate memory for variables dynamically and free it after it has been used. Now, even if this option is useful if you are using large networks of data, there is little or no effect on the unique variables.

  A final Council, given the huge memory installed on modern computers, are you sure you really need that extra work? I mean, the dynamic allocation of memory involves some additional precautions in programming: check the errors on each function malloc or calloc, check that the pointer is valid before each use, freeing pointers before reassignment in order to avoid memory leaks and so forth, so a balance must always be sought between the memory and the difficulty in programming.

• Improved LabVIEW 8 to 2013 and VI asked now to find the installation package for Run-Time Engine 7.0

  I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit).  The machine has also of LabVIEW 8 is installed, which is what I used before the upgrade.  I opened a VI has been created in LV8 and then saved it and all its subVIs in LV2013.  Now when I open the VI in LV2013 and try to run it, a window opens asking me to find the installation package 'lvruntimeeng.msi' for LabVIEW Run-Time Engine 7.0.  If I cancel this dialog box, and the subsequent message, indicating that the installion files were not, the VI appears (at least of the initial inspection) to function normally.

  I have closed LabVIEW, downloaded Run-Time Engine 7.0 on the site of NOR and tried to install it, but I received a message saying that it is already installed (as I had suspected).  How can I determine what part of the VI and/or its subVIs tries to make use of Run-Time Engine 7.0?  If not, how can I get LabVIEW to use instead the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?

  Bob_Schor wrote:

  You run your VI of a project?  If so, you can watch the dependencies and get an idea of what live "in charge", you might have.  There may be "something old" in your code in LabVIEW 8, which was replaced in 2013, but ' plane still around "-If you can identify it, you can probably replace it with its"more modern"equivalent

  If you do not have the VI in a project, you can simply open LabVIEW, create a blank project and add your first level VI.  If all of your relevant screws are in a single folder, add the entire folder.  Now look in the dependencies.

  BS

  Yes, I run the VI from within a project of LV.  After some more research in the knowledge base OR I could solve the problem by using the following procedure:

  1. use the measurement and Automation Explorer to uninstall Run-Time Engine 7.0

  2. restart the PC

  3. open the project, close the project by choosing "save all".

  4. restart the PC

  5 reinstall the Run-Time Engine 7.0 using a file downloaded from ni.com

  6. restart the PC

  7. open the project, close the project by choosing "save all".

  8. open the project and run the VI.  No more messages on LabVIEW, trying to find the Run-Time Engine 7.0.