Report of registration troubleshooting
Hi all
I'm trying to convert a report seeded with output to Excel but I when the ratio test is taking too much time to run and finish by mistake.
I don't know that I made a few mistakes. I'll list the steps I have done.
Report - asset register report
Developer of applications-responsibility
Copy of the report
Change of output in xml format
Responsibility xml editor
Download model
Creates a new data definition
Created a new model
Admin responsibility system
Attached is the new report
Presented the request
The query takes a long time to complete and ends with warning. I tried several times with different reports, but still have the same issues. I think that I do not take the steps well.
Grateful if someone can help.
Hello
According to the newspapers at the same time ("simultaneous profile: OPP Response Timeout value may be necessary.") (''), have you tried to change?
If not, by default, a time-out occurs if the report takes more than 5 minutes (300 s).
You can use the suite to check the value:
SELECT FND_PROFILE. VALUE('CONC_PP_RESPONSE_TIMEOUT') FROM DUAL;
These 2 profiles options which can be set to control the timeouts:
Profile option: simultaneous: OPP Response Timeout
Internal name: CONC_PP_RESPONSE_TIMEOUT
Description: Specifies the duration that a manager expects OPP meet his demand for post-processing.
Option profile: Timeout of concurrent processes: OPP
Internal name: CONC_PP_PROCESS_TIMEOUT
Description: Specifies the amount of time that the manager expects the OPP to actually process the request.
The value for the above profile options can be increased to avoid delays.
In your case:
If your report takes about 30 min., then set this option of profile to a value > 30 min. (late 1800s), e.g., 2000 or higher.
Be sure to bounce the conc, Manager.
Another option is to "optimize" the report (of course, not one seeded, but a copied version) so that it ends ("fast)".< 5="" min.="" if="" your="" opp="" timeout="" is="" 5="">
HTH.
Kind regards
Rajen.
Tags: Oracle Applications
Similar Questions
-
Request to the section is clear when I click the link remove in the report.
Hello
I added option delete in SQL report. To delete record, I use java script and remove the sql query.
Now the problem is when I delete the file then page is refreshing.
I've created a report that is on the page of no 1 and option is edit report.when inthat I click this button then change id respective don't enter page no 2 in a hidden item P1_id.
I do not perform the Delete on the page operation No 2.
so the problem is when I click on remove linl in report to delete record page refresh and my ID of the request in point is also updated.
so I want to when I click on remove in the report, then registration should be delete, but asking the point should not be clear.
Java scipt
<script type="text/javascript"> function doDelete(p_arg){ $s('P1_SELECTED',p_arg); doSubmit('DELETE'); } </script> -------------------------------------- BEGIN DELETE FROM TC_DETAILS WHERE LINE_ID =:P1_SELECTED; END; ---------------- javascript:doDelete('#LINE_ID#');
Hello
Do you have processes that clear the cache of objects?
Your agency you clear cache of items?Kind regards
Jari -
Profile of Thunderbird is only partially recognized
I have Thunderbird + Lightning in use on the operating systems Linux Mint and of Debian. Installation of Thunderbird Mint is used only for about six months after I switched to Debian as the main operating system. Debian installation encountered problems (unrelated to Thunderbird), and I had to return to mints. However, I was able to correctly migrate the profile.
Thunderbird shows the supplements and the basis of positioning preferences page, so that the profile is recognized. However, the user data (email accounts (and their mail), address books and calendar data), are all absent. The opening of Thunderbird, it starts asking me to create an e-mail account.
The version on Debian is 24.3.0. I believe that Thunderbird has been updated once or several times on Mint during the inactive period. His version is currently 31.3.0. FYI, all the add-ins were originally on the version of mint before the update to V31.3.0.
I made many attempts, following the standard instructions, replace the content of the profile with the old content (I used the procedure successfully to migrate from Windows to Debian Mint). These included attempts using the old existing profile and a previous backup copy. I even uninstalled Thunderbird, deleted the directory .thunderbird and started on (several times), re-installation of the repo of Mint.
I don't think to check Mint profile always worked before attempting replacement. However, after the failure, I rebooted the old profile of mint, and it does not work either. Since Thunderbird has been completely reinstalled, there is probably not a problem with corruption of software, and since several profiles previously failed, it seems unlikely that all profiles are bad. It almost looks like some incompatibility between Thunderbird V31.3.0 and profiles from previous version, but I didn't know all the present reports.
Troubleshooting information page:
Application Basics
Name: Thunderbird Version: 31.3.0 User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.3.0 Profile Directory: Open Directory
(Local drive) Application Build ID: 20141128200244 Enabled Plugins: about:plugins Build Configuration: about:buildconfig Memory Use: about:memory
Mail and News Accounts
Crash Reports
Extensions Account Colors, 8.2, false, accountcolors@DW-dev ImportExportTools, 3.1, false, {3ed8cc52-86fc-4613-9026-c1ef969da4c3} Lightning, 2.6.6, false, {e2fda1a4-762b-4020-b5ad-a41df1933103} Messaging Menu and Unity Launcher integration, 1.3.1, false, [email protected] Send Later, 4.3.1, false, [email protected] Theme Font & Size Changer, 34.2, false, {f69e22c7-bc50-414a-9269-0f5c344cd94c}
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400 browser.cache.disk.smart_size_cached_value: 358400 browser.cache.disk.smart_size.first_run: false browser.cache.disk.smart_size.use_old_max: false extensions.lastAppVersion: 31.3.0 mailnews.database.global.datastore.id: 8fd333c3-1f74-42c8-89fa-735441cec76 mail.openMessageBehavior.version: 1 network.cookie.prefsMigrated: true
Graphics
Adapter Description: X.Org -- Gallium 0.4 on AMD RS780 Vendor ID: X.Org Device ID: Gallium 0.4 on AMD RS780 Driver Version: 3.0 Mesa 10.1.3 WebGL Renderer: false GPU Accelerated Windows: 0
AzureCanvasBackend: cairo AzureSkiaAccelerated: 0 AzureFallbackCanvasBackend: none AzureContentBackend: cairo
JavaScript
Incremental GC: 1
Accessibility
Activated: 0 Prevent Accessibility: 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.6 4.10.6
NSS 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
NSS Util 3.16.2.3 3.16.2.3
NSS SSL 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
NSS S/MIME 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
I've attached a screenshot of the error console. At least the first entry appears to refer only to a problem with the themes, and not with the content. Also, according to online information, I found this contained panacea.dat of the references to the old name of profile. Take this file off service has not solved the problem.
I will close the loop on this issue after discovering my own answer. The reason why the user data has not been recognised, it is that he wasn't there.
I was using a backup procedure that has checked the base directory, which includes the profile. To make sure that no files are currently in use, I ran Ark of another operating system. He seems to have backed up everything except the few files that contains the data of actual user (e-mail accounts, messages and calendar data). Without burrow in the profile, it was not obvious that these files were missing. I don't understand why these files were treated differently.
The lesson to take away is that this isn't a good way to save the profile, and it is useful to make your real critical files in the backup.
-
Search not showing in Firefox 27 suggestions
When searching with the search bar, the suggestions are not displayed as they did in Firefox 26.
Hello ale123, thanks for reporting with your troubleshooting information - it shows that search suggestions are disabled in your current setup. in order to reactivate once again, ctrl + click on the search bar and check the option to see the suggestions in the context menu that appears.
Use the most popular search suggestions in the Firefox search bar
-
Firefox crashes several times in safe mode and out when I try to visit Web pages
Whenever I try to visit Web pages, it crashes. Google, sometimes, or any whatever I click on google, at all. Constantly. As you can see on the accident of IDs, it crashed AGAIN and AGAIN and again. just about everything it crashes.
Interesting to note, however, is that things off internet does not crash it. I was able to open the page of accident reports and assistance; Troubleshooting the thing without any problem.
It's infuriating, because I can't navigate with mozilla at all, and I don't really like chrome.
EDIT:
Please note, other browsers do not do this. At least, chrome is not, I don't have IE.It is a problem with the BL2011. DLL file.
Search Google suggest that the file can be a part of the malware (trojan).Do a check with some malware malware, analysis of programs on the Windows computer.
You need to scan with all programs, because each program detects a different malicious program.
Make sure that you update each program to get the latest version of their databases before scanning.- http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
- http://www.superantispyware.com/ - SuperAntispyware
- http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
- http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
- http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
-
I am following the guide:
http://www.VMware.com/files/PDF/products/vCloud/VMW-vRealize-automation-61-deployment-guide-HA.PDF
to deploy the vCAC in a design behind a F5 LTM HA.
im running into two questions:
1.
I'm only able to get this config to work (services report all registrants) if I update the/etc/hosts file on devices and add the F5 VIP DNS entry in the line of the local host in the hosts file. The problem is that it removes this entry whenever the server is restarted. I considered adding the init.d change but thought there was probably a reason that they replace the file and a better way to solve this problem.
If someone got it works without adding that entry? If so, how?
2.
I'm not really can navigate the vcac device using the name DNS of VIP F5. It is just a rounds and eventually times out. If I decrypt and encrypt everything again on the F5 works well.
My SSL certificate is issued to the DNS of VIP F5 name with the names of the servers as without.
Has anyone got it working by using the parameters in the above guide? ID prefer do not unnecessarily decrypt/re-encrypt on the F5 if I don't.
Post edited by: pizzle85
After a long support that they were not able to tell me why it didn't work not like they said in the docs they provide. In the end, I had to do quite a bit of tinkering to our F5 config to get all work as expected. We were see demand for re-auth random in the middle of sessions, with our vRO HA, we were see delays when you request items in catalog ASR. For these questions, we were defining priority Member pool on a pool member to 10 and the other to 1. This do us HA failover but let a service all the traffic node. After that we did it, we stopped see bad behavior. For the journal on the issue, we ended up having me to disable the verification of host file in interface VAMI of the virtual appliance to prevent it to reset the host file. Support said they had seeds a few times and it would be financed. We had to do this in 6.1 and had no problems during the upgrade to 6.2. For that you go to the settings of the virtual appliance of vRA application remove, click on Options of vApp, under creation, expand properties, select vami.hostname and delete it. This is to prevent the virtual application to reset the host file whenever the computer is restarted. We have been working well because this change has been made.
-
Time difference calculate for changing value
create table tbl ( id number, value1 varchar2(5), value2 varchar2(5), date_changed date); insert into tbl (id, value1, value2, date_changed) values (1,'N', 'RM', '16-DEC-2013'); insert into tbl (id, value1, value2, date_changed) values (1,'RM', 'U', '17-DEC-2013'); insert into tbl (id,value1,value2,date_changed) values (1,'S', 'N', '16-DEC-2013');
I would like a report showing registration where value1 = RM and the value 2 = you and the time difference he had to change value2 = RM (this is the record where value1 = N and value2 = RM) to value1 = RM
ID value1 value2 time to change 1 RM U 1 days, 0 hours, 0 minutes, 0 seconds Can this be achieved? If so, how could I do that?
Thanks Diana
Try the below
SELECT T1.ID id,.
T1. Description MovieFrame,
T1. Value1 value2,
T2. Value2 value2,
T2.date_changed - t1.date_changed | ' days '.
EXTRACT (HOUR (TO_TIMESTAMP (t2.date_changed) - TO_TIMESTAMP (t1.date_changed))) | ' hour '.
EXTRACT (MINUTE SINCE (TO_TIMESTAMP (t2.date_changed) - TO_TIMESTAMP (t1.date_changed))) | ' min '.
EXTRACT (SECOND (TO_TIMESTAMP (t2.date_changed) - TO_TIMESTAMP (t1.date_changed))) | ' dry ' diff
OF tbl_new t1, tbl_new t2
WHERE t2.value2 = 'U '.
AND t1.value2 = t2.value1
AND t1.id = t2.id;
-
How to get the status of VO line lines
Hello
I have a table area and there are many records to retrieve an entity based in VO. Now, I've updated a line or lines, I need to display the changed records once on the next page. How can I view? I want to capture status line this kind of thing while pressing save button.
Thank you.
Problem solved by creating a new field (IS_SUBMITTED) in the database table to report the registration State with the default value in the form N (updated all existing records if there are in the table);
Step 1: Access the properties on your EO and navigate to Java and verify the Data Manipulation
Step 2: Go to your class EOImpl and research of method doDML
Step 3: Under the doDML method below adds the code to set the value of the attribute EO;
If (getIsSubmitted () .equals ("N")) {}
setIsSubmitted ("M"); where as a M stands for updating the
}
Step 4: In your controller @ PFR class, write the code for the loop and game of the State of the attribute as below;
OAApplicationModule am = pageContext.getApplicationModule (webBean);
If (pageContext.getParameter ("SubmitButton")! = null) {}
am.invokeMethod ("apply"); Save the records so the EOImpl will set the is_submitted to am "everywhere where the record changed state"
OAViewObject EmpPhoneVO = (OAViewObject) am.findViewObject ("xxPerPhonesVO1");
int empPhoneRowCnt = EmpPhoneVO.getRowCount ();
EmpPhoneVO.first ();
for (int i = 1; i)<=empPhoneRowCnt;>=empPhoneRowCnt;>
OARow empPhoneRow = (OARow) EmpPhoneVO.getCurrentRow ();
String lPhoneValidated = "Y";
your validation, if applicable
If (lPhoneValidated.equals("Y")) {}
System.out.println ("IsSubimtted after getting:" + empPhoneRow.getAttribute ("IsSubmitted"));
If (empPhoneRow.getAttribute("IsSubmitted").equals ("M")) {}
empPhoneRow.setAttribute ("IsSubmitted", "S");
}
System.out.println ("IsSubimtted after the value:" + empPhoneRow.getAttribute ("IsSubmitted"));
SubmitMessage OAException = new OAException ("coordinates of the employee: rank #" + i + ": submitted for approval to the agent relationship.",)
OAException.CONFIRMATION);
pageContext.putDialogMessage (submitMessage);
}
EmpPhoneVO.next ();
}
}
Kind regards
Adnan...
-
Event dispatcher listener giving a ClassCast Exception in C++ 3.6.1
Hello
I enclose a NamedCache underlying event listener and when I update the cache entry I did not all alerts. But when I checked the
Journal of consistency than exception available now, I found. But I don't do any kind of Casting as mentioned below.
2012-01-17 11:12:55.793/0.320 Oracle Coherence for C++ RTC 3.6.1.0 < Info > (thread = hand): Socket connected to 169.52.37.237/169.52.37.237:9099
2012-01-17 11:13:04.859/9.386 Oracle Coherence for C++ RTC 3.6.1.0 < error > (thread = ExtendTcpCacheService:coherence:component:util:TcpInitiator:coherence:component:util:Service:EventDispatcher): an exception has occurred when sending the following event:
{[Coherence::Component:util:RunnableCacheEvent: coherence::util::MapListenerSupport::FilterEvent{coherence::component::net::extend::RemoteNamedCache::BinaryCache[source=coherence::component::net::extend::RemoteNamedCache::BinaryCache@0x69f090c4] update: key = Binary(length=19), old value = Binary (length = 713), value = Binary(length=713) new filters = [NULL]}
2012-01-17 11:13:04.860/9.387 Oracle Coherence for C++ RTC 3.6.1.0 < error > (thread = ExtendTcpCacheService:coherence:component:util:TcpInitiator:coherence:component:util:Service:EventDispatcher): the following exception has been captured by the event dispatcher:
2012-01-17 11:13:04.860/9.387 Oracle Coherence for C++ RTC 3.6.1.0 < error > (thread = ExtendTcpCacheService:coherence:component:util:TcpInitiator:coherence:component:util:Service:EventDispatcher): NULL
coherence::lang:ClassCastException: try to cast from a 'gce::coherence:CoherenceEventHandler' to 'coherence::util:MapListener' sub coherence::lang:coh_throw_class_cast(const_std::type_info&,_const_std::type_info&) (ClassCastException.cpp:27)
at coherence::lang:coh_throw_class_cast(std::type_info_const&,_std::type_info_const&)
to coherence::lang:cast coherence::lang:TypedHandle < coherence::util:MapListener > < coherence::lang:TypedHandle < coherence::util:MapListener >, coherence::lang:Object > (coherence::lang:TypedHandle < coherence::lang:Object > const &, Boolean)
to coherence::lang:cast coherence::lang:TypedHandle < coherence::util:MapListener > < coherence::lang:TypedHandle < coherence::util:MapListener >, coherence::lang:Object > (coherence::lang:TypedHolder < coherence::lang:Object > const &, Boolean)
to coherence::lang:cast coherence::lang:TypedHandle < coherence::util:MapListener > < coherence::lang:TypedHandle < coherence::util:MapListener >, coherence::lang:Object > (coherence::lang:MemberHolder < coherence::lang:Object > const &, Boolean)
When I wrote a sample application, it works without any problem. Only the difference of the program come above exception is this library c ++ is responsible for true NYI and relevant event listener is added during a JNI method call. Please explain to me why this exception is coming. I am attaching the relevant code as well.
-----------------------------------------------------------
CoherenceEventListener.hpp
/*
* File: CoherenceEventHandler.hpp
* Author: srathna1
*
* Created January 5, 2012, 10:15
*/
#ifndef COHERENCEEVENTHANDLER_HPP
#define COHERENCEEVENTHANDLER_HPP
#include "coherence/util/MapEvent.hpp".
#include "coherence/util/MapListener.hpp".
#include < iostream >
#include < map >
#include ' coherence/lang.ns.
#include "mihelper.hpp".
#include "MiCoherence.hpp".
#include < String >
#include "MICoherenceDataObject.hpp".
using coherence::util:MapEvent;
using coherence::util:MapListener;
using namespace coherence::lang;
/**
* Implementation of MapListener which prints each event as it receives
* them.
*/
gce {} namespace
namespace consistency {}
class CoherenceEventHandler
: public class_spec < CoherenceEventHandler,.
extends < object >,
implements < MapListener > > {}
friend class factory < CoherenceEventHandler >;
public:
CoherenceEventHandler(CMiCoherence * miCoh): mi (miCoh), msgSeqNo (1) {}
}
virtual void entryInserted (MapEvent::View vEvent) {}
Vcle Object::View = vEvent-> getKey();
Key String::View = cast < String::View > (Vcle);
Object::view vValue = vEvent-> getNewValue();
subject of tank [100];
strcpy (topic, key-> getCString());
Managed < gce::coherence:MICoherenceDataObject >: discovers pos = cast < < gce::coherence:MICoherenceDataObject > Managed: View > (vValue);
std::cout < < key < < '=' < < pos < < std::endl;
}
virtual void entryUpdated (MapEvent::View vEvent) {}
Vcle Object::View = vEvent-> getKey();
Key String::View = cast < String::View > (Vcle);
Object::view vValue = vEvent-> getNewValue();
subject of tank [100];
strcpy (topic, key-> getCString());
Managed < gce::coherence:MICoherenceDataObject >: discovers pos = cast < < gce::coherence:MICoherenceDataObject > Managed: View > (vValue);
std::cout < < key < < '=' < < pos < < std::endl;
GCE::coherence:MICoherenceDataObject msg = * pos;
}
virtual void entryDeleted (MapEvent::View vEvent) {}
}
private:
CMiCoherence * mi;
int msgSeqNo;
};
}
}
#endif / * COHERENCEEVENTHANDLER_HPP * /.
---------------------------------------------------------------
Code for event registration
NamedCache::Handle miCoherenceCache = NULL;
try {}
String::view cacheName = szConnect;
miCoherenceCache = CacheFactory::getCache (cacheName);
} catch (const std::exception & e) {}
LOGERR ("error in cache for middleware consistency during initialization: %s", e.what ());
Return MI_ERR_BADSTATE;
}
nConnectState = miCoherenceCache - > getCacheService()-> isRunning() == true? 1: 0;
miCoherenceCache-> addFilterListener(gce::coherence::CoherenceEventHandler::create(this));)
-------------------------------------------
Please give me an idea why few internal event dispatcher giving exceptional...
Thank you and best regards,
SuraHi Sura,
That exception would seem to indicate that libcoherence.so was loaded several times. Specifically the exception indicates that a course was recorded twice with our infrastructure of class loader, and this loading occurs as part of the static initialization of the library, which in turn is part of the loading of the library. While I'm not sure that the library has been charged twice to 100%, so it seems quite likely. On a danger noted, the changes above with 3.7.1 and we reporter class registration is delayed until the first time you try to use the library. So with 3.7.1 you will see a different behavior, even if the loading of the library several times always seems to be fatal.
Mark
The Oracle coherence -
two dimensions of time in a cube
Hi all
I have an obligation to create a cube for customer mgmt reports. People want to report on registrations and connections of clients.
So I need, in my cube, two references to the size of my time (called dim_time). I tried and owb accepts two references to dim_time, rename the second dimension to dim_time_1 automatically. Deployment and loading is also very good.
If from a test perspective, this seems to be the right way to do it. Has anyone else done something like this and you've seen all the problems later?
I want to be back up before going to production.
Another issue is about the join of the second reference dim_time to the date of termination. Everyone has a recording date, but most (I hope) is not a termination date. But each of them must be loaded in the cube. I have not seen a possibility to influence the joins to the cube operator. What is possible?
Kind regards
KnutTo make two references to the same dimension, you can create two roles in the time dimension. Then, in the cube, you can view each role. In fact, it's the same thing you did, the only difference is using roles make the model easier to understand, because you can give a friendly name to each role.
The second point is on the reference to a date zero. I think that there is no way to do it using the cube object. In these cases, I use to create a date as 12/31/9999 "and referring to it. The inside of the card, you can use a phrase with something like this: to_date (NVL (your_date, ' 31129999'), 'ddmmyyyy'). And, of course, don't forget to enter this date in the dimension.
It is not common to have null data in DW. Any exceptions must be identified and documented, for example, 'Not available', 'Unknown', etc. -
Update Windows in Windows 7 will be not updated.
Error code 80244008.
Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".
You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Report model of column named with 2 lines/registration poster null in the top row
I was able to create a report model of column named with 2 rows by record type for a tabular presentation, but it seems to hide only the first line of the original registration and displays the 2nd row, i.e. all NULL values. All other records appear correctly.
Here is the HTML code for the page that results for the init_row of the report. I understand why he behaves this way, but I have no idea how to do the style of the first < tr > Reports to the 2nd line of the record.
Any ideas to try would be greatly appreciated. I tried to use conditions on the values of #ROWNUM #, but the null line is still there...<tr id="init_row_R1009150109271352230" style="display:none;" > <td rowspan="2"><a href="javascript:ShowRegion('')" >(null)</a></td> <td rowspan="2">(null)</td> <td rowspan="2">(null)</td> <td rowspan="2"><label for="f04_0000" class="hideMeButHearMe">Completion Date#ROW_HEADER#</label><span style="white-space: nowrap;"><input type="text" id="f04_0000" name="f04" maxlength="2000" size="12" value="" autocomplete="off"></span></td> <td>Premises</td> <td><label for="f07_0000" class="hideMeButHearMe">Vacant#ROW_HEADER#</label><input type="text" name="f07" size="5" maxlength="2000" value="" id="f07_0000" /></td> <td><label for="f08_0000" class="hideMeButHearMe">Delinked#ROW_HEADER#</label><input type="text" name="f08" size="5" maxlength="2000" value="" id="f08_0000" /></td> <td><label for="f09_0000" class="hideMeButHearMe">Soft Dt#ROW_HEADER#</label><input type="text" name="f09" size="5" maxlength="2000" value="" id="f09_0000" /></td> <td><label for="f10_0000" class="hideMeButHearMe">Ull Poi#ROW_HEADER#</label><input type="text" name="f10" size="5" maxlength="2000" value="" id="f10_0000" /></td> <td><label for="f11_0000" class="hideMeButHearMe">Ported#ROW_HEADER#</label><input type="text" name="f11" size="5" maxlength="2000" value="" id="f11_0000" /></td> <td><label for="f12_0000" class="hideMeButHearMe">Blocked#ROW_HEADER#</label><input type="text" name="f12" size="5" maxlength="2000" value="" id="f12_0000" /></td> </tr> <tr> <td>Path</td> <td><label for="f13_0000" class="hideMeButHearMe">Path Vacant#ROW_HEADER#</label><input type="text" name="f13" size="5" maxlength="2000" value="" id="f13_0000" /></td> <td><label for="f14_0000" class="hideMeButHearMe">Path Delinked#ROW_HEADER#</label><input type="text" name="f14" size="5" maxlength="2000" value="" id="f14_0000" /></td> <td><label for="f15_0000" class="hideMeButHearMe">Path Soft Dt#ROW_HEADER#</label><input type="text" name="f15" size="5" maxlength="2000" value="" id="f15_0000" /></td> <td><label for="f16_0000" class="hideMeButHearMe">Path Ull Poi#ROW_HEADER#</label><input type="text" name="f16" size="5" maxlength="2000" value="" id="f16_0000" /></td> <td><label for="f17_0000" class="hideMeButHearMe">Path Ported#ROW_HEADER#</label><input type="text" name="f17" size="5" maxlength="2000" value="" id="f17_0000" /></td> <td><label for="f18_0000" class="hideMeButHearMe">Path Blocked#ROW_HEADER#</label><input type="text" name="f18" size="5" maxlength="2000" value="" id="f18_0000" /></td> </tr> <tr>
And yes I know I should not use the tabular forms, but sometimes what is wanted, it is not what is better... :-)
See you soon,.
Greg
Published by: snowman on 4 December 2012 15:12
Published by: snowman on 4 December 2012 15:13See + {: identifier of the thread = 1116477} +.
Sorry, I forgot all that when I suggested that you can use a custom here report model (not surprisingly, since I did not use the tabular forms given that these changes have been made).
I don't remember see potential customization discussed in 4.1 or 4.2 (but then I would not have all these tabular forms).
If your options seem to be:
- Using nested tables as suggested by mark, who introduced the downside to Peter about the width of the columns (you can try to remedy using CSS to create fixed-width tables/columns, but my last experience of this receipt very messy in terms of support of IE cross-browser and legacy...)
- Build the page completely manually without the help of the features integrated in the form of the APEX.
- Try to customize the behavior of line add to take into account the layout is customized using the dynamics of the actions/jQuery.
- Do not use the tabular forms.
-
On my desk when I click on the firefox icon, pops up 'USER ACCOUNT CONTROL' - DO YOU WANT TO ALLOW THE FOLLOWING GUIDELINES
PROGRAM TO MOVE TO THIS COMPUTER? (the program name is firefox). I click 'YES' and my opening page appears.
This, the only way I can access my portable browser which is firefox. In case of problem report says "Firefox IS INCOMPATIBLE.
HOW CAN I SOLVE THIS PROBLEM? Thank you.KENNETHM said
Hi Sashoto:
Because I'm not a computer genius I forgot an important part of the info
I have WINDOWS 7 Home Edition NOT in WINDOWS XP. That's why I think
This version of FIREFOX UPDATE 36 should work with WINDOWS 7. All new
recommendations for a solution to my problem? Thank you!Please follow these steps and let me know if these work:
- Open the Windows Task Manager
- Click the process tab
- Click on show processes from all users
- You may be prompted for confirmation. Say yes, or type the password.
- Search for firefox.exe or similar process
- Right-click on the process and select end process tree
- Now, open computer > (c :)) drive > Program Files (x 86) > Mozilla Firefox > uninstall > helper.exe)
- Run the installer-United Nations
- Restart your PC
- Reinstall Mozilla Firefox
-
Collaborative troubleshooting paper tech support reports operating systems.
Collaborative paper troubleshooting operating systems
Hello anthonyhaskins,
Unfortunately, Windows ME is no longer a product supported.
For more information, please visit the following site:
http://support.Microsoft.com/ph/6519
Please note that there are several articles here that can be used to answer your questions.
Best regards
Matthew_Ha
-
How can I find my story troubleshooting and error reporting on Windows Vista?
Here are the questions that an analysis report showed that take up too much disk space.
Maybe it's the "reports and Solution of the problem" in the control panel. There is link in the left pane 'Clear history of solution and the problem' and 'view problem history.
Maybe you are looking for
-
Equium A200-1V0 - freezes after plug power supply AC?
Hi all I'm trying to find the solution of the problem: My laptop Equium A200 1V0 freezes as soon as I plug the power running. I tried the new battery and new AC adapter after reading some solutions of the internet but so far without success. It works
-
Why is iPad slow to load?
WWhy the IPad is slow to load?
-
I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem. Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different s
-
Dv7 ENVY: ENVY dv7 will not start
ENVY laptop computer dv7 will not start. It passes through the start-up phase, but when the office arrives, it shuts down and office back again, again, again, again, etc. never stops trying to load the desktop.
-
Hello I very frequently use the CTRL + P (Control Panel of callback function) to check the arguments to function etc. Doing so opens the Panel of the service as a new tab which covers all my code, even if the Panel itself would need much less space.