report of vcenter multi

Similar Questions

• Measure the performance impact of a PowerCLI report on vCenter

  How will I know how much of an impact on the performance my powerCLI report will have on the performance of my Server vCenter?
  If I run a report for example which attracts a large number of events of vCenter Server and sorts through them, is that the processing and memory usage will be mainly on the virtual machine, I am under the report of?  How much charge it will put on vCenter itself?  (I see use RAM up substantially on the virtual machine, I am running the report)
  Thank you!

  Just leave out the MaxSamples parameter

• Differences in total capacity (MHz) reported by vCenter

  I'm still looking through the documentation, but I hope that someone can provide a bit of insight.  When I am connected to our vCenter server and looking at the performance of the host tab, I have the ability to view the total CPU capacity for this host in MHz.

  Each host has two processors 6 cores/CPU.  Up to 12 physical cores at 2 GHz each.  In theory, the total CPU capacity for each host is therefore right to approximately 24,000 MHz.  When I retrieve this metric to each host using a PowerShell script, it returns the expected number (approximately 23 988 MHz for each host.  However, when I look at the paintings of performance in vCenter for each host, it says that each host has a total capacity of 21 520 MHz CPU each.

  Anyone have any ideas why these numbers are different?  Is it a kind of overload vCenter is subtracting these numbers when you view performance dashboards?

  Thank you!

  Welcome to the community - vCenter reports what is available for virtualization - the divergence between abd 21.52 24 is that the ESXi host has its own need for CPU and that is subtracted.

• Inreractive report: Your control multi-column

  Hi guys an girls,.
  
  I have an interactive report on an application I built. I asked if it is possible to order by more than one column.
  
  Is what I mean by that, when I click on the column heading, I can order this column in ascending or descending order. Is it possible to order by more than one column?
  
  Thank you
  -N.S.N.O.

  Hello

  Yes you can. Simply choose 'Sort' menu options.

  --
  Paulo Vale
  http://Apex-notes.blogspot.com

• Use of resources under, ViewPlanner vs. vCenter

  Hello

  When executing default ViewPlanner 3 StandardBenchmarkProfile, vCenter (connection of client vSphere ala) alerted on a high utilization of the processor for ESXi servers in the cluster. VCenter performance tables presented the CPU utilization to 80-90% and more for most of the duration of the workload. However, the ViewPlanner report shows average processor utilization at 40-50% for the same server ESXi. Who is the most accurate measure of the use of resources?

  ESXi servers have Intel processors with hyperthreading active. The difference between using reported in vCenter and ViewPlanner seems to be similar to the difference that I see in esxtop for CPU Core time values Util and PCPU time % Util (I admit I am a little fuzzy on the interpretation of the esxtop CPU Core Util PCPU % against metric Util when hyperthreading is enabled).

  Thank you

  In Scheduler report view, you can view % UTIL, which is the correct metric if you have active hyperthreading, % USED (s) will not give you the correct image.

• Convert the output of a report at the entrance to another report

  I am looking for a number of past events related to the creation of virtual machines.  After obtaining all the data I can on those virtual machines from objects event, I try to channel the output in another section of the report that vCenter queries for each virtual computer and gets class size information from the results of get - vm.

  Get-VIEvent - maxsamples ([int]: MaxValue)-start (Get-Date). AddDays(-8)-done (Get-Date).adddays(-4) |

  where {"VmCreatedEvent", "VmClonedEvent", "VmDeployedEvent" - contains $_.} GetType(). Name} |

  Select Createduserid, userName,@{N="vmname"; E={$_. UM Name}},@{N="ESXiHost"; E={$_. $host.name}} |

  % {get-vm-name $_.vmname} | Select name, numcpu, memoryGB, provisionedSpaceGB, UsedSpaceGB, Createduserid, username, ESXiHost | Export-csv-path 'c:\test.txt '.

  I need to change the part in orange to make it operational - so that I can take the properties that I created in the first part of the report, make it available in the second part of the report so that I add the new properties.  How can I get all of these combined in my output file properties?

  Thanks for the help!

  Hello, TheVMinator-

  You should be able to get the info with a little tweaking, as:

  Get-VIEvent -MaxSamples ([int]::MaxValue) -Start (Get-Date).AddDays(-8) -Finish (Get-Date).AddDays(-4) |Where-Object {"VmCreatedEvent","VmClonedEvent","VmDeployedEvent" -contains $_.Gettype().Name} | %{    $evtThisNewVMEvent = $_    Get-VM -Id $_.Vm.VM | Select Name, NumCPU, MemoryGB, ProvisionedSpaceGB, UsedSpaceGB, VMHost,        @{n="CreatedTime"; e={$evtThisNewVMEvent.createdTime}},        @{n="CreatedBy"; e={$evtThisNewVMEvent.UserName}},        @{n="OrigVMHost"; e={$_.VMHost.Name}}} ## end foreach-object
  

  It combines the select statements into one and with the use of an additional variable, allows for the creation of VM _and_ event info.  I also added the 'in progress' and differentiated VMHost VMHost to the event is the "OrigVMHost", just for fun.  How does do for you?

• Are operations of possible update on the form as a report?

  I have a form that I click a button CREATE to create a record with a new id.
  
  When more information will be entered in the fields, click on a "SAVE" button to submit the information for the rest of the form fields to the database.
  
  My problem is that I get an error. It is said:
  
  No updated report found.  Multi line update and delete operations cannot be performed on tabular forms of type 'Update report'
  
  I know that I don't have an updated report up-to-date. It is a form. But, I must submit/save the form after the initial creation information.
  
  What should I do to save the information?
  
  Thank you very much
  Maggie

  If you have a form, you must make sure that your fields have a "Column" source and that you found your fields to columns in your database by entering the column name in the source field.

  In addition, you must use "Auto-line treatment" instead of multiple lines updates and deletions. Operations of several rows work with tabular forms. You should have a hidden field in your primary key and an automatic extraction routine that runs when this field is not null, so you can use your form of the changes. It might be easier for you to start with the form wizard that puts it all in place. If your more comfortable it might be easier to encode operations manually like PL/SQL procedures on your page.

• Creating RBAC for vRO

  From what I see, although vRO gives the ability to create permissions on who can run what workflow, it does come with a predefined set of roles that you can assign to users such as vCenter.

  I don't want to find every single workflow for how that map to the existing security policy and one of determining what users should be able to run this workflow.

  Someone has thought of a way to create in vRO role-based access control?  For example:

  storage administrators: can run workflows that interface with WFA, VIPR and VMware snapshots and virtual disks

  network admins: can run workflows that integrate with network monitoring tools

  VMware administrators: can run all workflows against vCenter

  VMware operators: can run workflows that run reporting against vCenter and basic operations like VM remove CD rom drives, but can't make any other changes.

  I use "share a single session", so do not apply permissions in vCenter, on the permissions on the service account that uses the unique sessions.  This service account must have full administrator rights in vCenter.

  How can I create these 'roles' in the vRO in order to assign user accounts and permissions for workflow and then associate roles rather than individual users, like I did in vCenter?

  Major service providers have their public cloud service operated with vCO using shared session. vCloud Director also use a session unique admin if I remember correctly and now vCLoud AIr powers

  As Burke mentioned if you finish before the workflow, it is safe.

  It is possible to map the same roles as in vCenter, I think just not in your environment with different SSO server. From vCenter was only vCenter Orchestrator in the first place it was not necessary to duplicate features.

  Since vRO is the engine of orchestrator on vRA and vRA has any policy based / booking model vRO, it is unwise to replicate this feature either.

  This does not mean it is locked and prevent you from implementing vRO since it is not too difficult to set up a small DB roles list and associating these with permissions. It was how Lifecycle Manager (essentially a role based portal self service running on top of vCO) was built.

  It all depends on where your end users launch workflows. If it's from vCenter then certainly vCenter must manage roles for vRO.

  vCO is a component of the suite vCloud released under vCenter and under the vRA. Both components of the IMO which would address the roles feature.

• Can't Stop e-mail notifications

  Hello

  I subscribed for notifications of beta vSphere, but now I would like to unsubscribe. However, when I click "stop email notifications" from the Actions Panel on the corresponding page (VMware vSphere Beta [ARCHIVE]), a pop up appears saying "You will no longer receive notifications by e-mail for this item.", but that does not in fact. I keep on getting notifications and when I leave the page and then navigate back once again, "Stop email notifications" action is always available.

  Could someone please advise?

  Thanks in advance,

  -Stoimen

  I checked of DB and the user interface, you do not have email for vSphere beta notification and its sub-communities more. It may be your browser or other hidden issue. But your account is fine, you won't get notification by email for the communities of vSphere beta

  If you get still, send us the sample of e-mail that you got and we will track it down. In your profile, you are now only look the following community:

  VMware vCenter Multi - hypervisor Manager (MHM)

  Jean

  VMware

• Unable to connect to/vcops-custom

  Hello

  I see a few examples of people with construction of dashboards customized and they navigate to vcops-server.domain.local/vcops-custom. When I go to this page a login is present and after loging in I get the following error:

  "This product is without license or cannot connect to Server vSphere. Use a vSphere Client to connect to vCenter Server and assign a license key.

  
  

  When I go to the admin pages and the recording tab, I see the following information:

  Service status: running

  License SKU: vCenter Operations Manager 5.6 Standard <-5.6 reviews! 5.7 not which is the version I am running.

  Licensing mode: Standard

  License status: licensed

  Licensing vCenter server: my vcenter Server

  License capacity: infinite

  In the vCenter server record:

  Connection status: connected

  Registration status: registered

  On my vCenter Server 4.1.0 build 491557 (well yes it's old enough), I see "vCenter Operations Manager Standard 5.6" and 791 VMs assigned with unlimited capacity license. The solution that uses this license is reported as: vCenter Operations Manager - < internal IP >.

  Everything seems to be correct. The license key that I use is the one you see on the download page when downloading vCOPs. See release notes: VMware vCenter Operations Manager 5.7

  What Miss me? I see in the page "Compare editions" on the vmware site Standard edition doesn't have customizable dashboard, this means that all vcops-custom is unavailable?

  In a word: '' Yes. '' Personalized dashboards IS an advanced/enterprise feature and is not available when you run "foundation" (free) or a "standard" license Which also includes the Web site is not available. In addition, our environment shows as a 5.6 license, but works very well for 5.7.1.

• Analysis of VM disk space

  I am running vSphere 4.1, ~ 300 mV, 12 ESXes and vCenter. Guest operating system is primarily Windows 2003/2008.

  How can I keep track of disk space in my VMs in the simplest? Is it possible to obtain a report from vCenter?

  The best way is to get any kind of information (also using the drive in a VM) is to use the free software RVTools http://www.robware.net/

• P2V Win2k SP4 failure

  Hi all

  I am trying to import a physical box of Win2K SP4 using vCenter Guided Consolidation.

  It is a failure when you try to install the agent on the source area.

  I get the error "could not complete the vCenter Converter agent source % Installationsur. Error code 1603.

  I did some research and I've seen reports that vCenter Converter 4.2.1 no more boxes supports Windows 2000?

  Does anyone have knowledge of a workaround for this?

  Thanks to all in advance!

  I'm under vCenter 4.1

  for W2K, I suggest to use Converter 3.0.3 you should have better luck.

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vcenter_converter_standalone/3_0

• Good basis for Xeon L5430 VCA?

  We have three host with this processor reported by vCenter servers: Intel Xeon L5430 @ 2 .66GHz.

  We will soon present a new host with a processor Intel Xeon E5630 2.53 GHz server because it has hyperthreading, the L5430 has no hyperthreading.

  Is 45nm Core 2 "Penryn" Xeon line of VCA correct basis for the L5430?

  I looked at him and I see 45 nm' on the site of Intel and elsewhere... I've also seen "Harpertown" in product descriptions, which confuses me, because "Harpertown" isn't "Penryn".

  Thank you, Tom

  Visit this link:

  You will get your answer.

  http://KB.VMware.com/selfservice/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=1003212&sliceId=1&docTypeID=DT_KB_1_1

• Is it possible for HA / VMotion to migrate a virtual computer when the fiber of SAN connectivity is lost / Cup?

  Use: Version ESX 4 / vCenter4

  I have a cluster with ESX 4 nodes running HA. I want to know if it is possible for vmotion to migrate a virtual computer if the host on which it lives has a loss of fiber optic connectivity to SAN/back-end storage. I can get VMotion to work when I go unplug the Ethernet cable to the back of the esx host, but when I unplug the fiber connections that will freeze the virtual machine and no migration will happen. Is it possible to do this with VMotion HA? I also tried to use aggressive DRS to see if when I unplug the fiber it lose connectivity and a loss of memory or cpu and migrate... so not happened... the vm always reports to vCenter that memory and cpu have not changed... then DRS don't not kick to migrate the virtual machine.

  Thank you.

  There is no such thing for HA. HA only fires when there is a host or a network isolation fails. DRS also does not realize this. However, there are a lot of events that can trigger an action such as "maintenance mode". don't know if there is a for the failures of way, just check it out. It is described in the following pdf document: http://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_admin_guide.pdf

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• VMotion migration works only one way...

  I have 2 hosts running ESX 4.0 I installed Vcenter and I use the VSphere GUI client to manage hosts.

  I am able to perform dynamic migration from one host to another, but not the reverse, and when I try to run the

  migration, I get the following error: "a general error has occurred: cannot create the log file supplied cannot open"/var/log/vmware/journal/1234xxxxxx.xx"to write" I don't think that it was due to lack of disk space.

  Can someone help me?

  Have you tried to connect to the console and check if it

  is the space on the host by using the command 'df '? It's the

  version ESX console I recommend you connect to the shell and

  perform a "tail-f/var/log/vmkernel" as he tried to emigrate in the

  a direction that does not work. I found that the error messages

  reported in vCenter don't always point you in the right place. You

  can get a little more information to facilitate your search, if it turns out not to make disk space.