Report Total partial and Total formatting help

Similar Questions

• In Windows Vista, I can not change the settings in my 'reports on problems and Solutions' Please help

  I'm the administrator of this PC, and it is the only account that I have.

  Quick fix pls help thnks

  Hello
  • What happens when you try to change the settings?
  • You receive an error message?
  • What were the changes made before the problem occurred?
  • Which settings you want to change?
  
  You can view these methods:
  Method 1:
  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:
  I recommend you perform the clean boot.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

• partial and total indicator with meter

  Hello guys,.

  I put an application implemented using counters timers.

  I created a Vi that read a meter of a water sensor (each litre give me an impulse), and I take this opportunity to analyse use partial and total water in the laboratory.

  I want to create a panel until the client can follow the consumption of water (in the last 24 hours) (last 7 days) and (total).

  I can read it properly for a partial last 24 hours and reset the indicator properly after 24 hours, but I can't do the same with indicator based on 7 days because when to reset the partial indicator 1 (last 24 hours) is reset also the partial indicator 2... While the total indicator is ok...

  Do you have ideas to solve this problem. all suggest is precious to me...

  PS I think that a good workaround is to use an other counters timers to acquire the same impulse and to use the same program, but I think that there is a trick to fix this programm

  Thanks in advance

  Dave

  Hello

  I couldn't always run your vi as I do not have the required tools but I guess I knew what was wrong with the code. I edited your second code a bit and joined here. Take a look. The explanations are also included in the block diagram, so that you can understand the concept well.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a solution if your problem is resolved)

• Export and interactive report totals

  Hi all
  
  I tried to get the totals on the basis of an interactive report, but the only way I can find is to make it as aggregations and save it as the default report.
  
  The problem is when users download the report totals are missing, is it possible to have the total number, displayed and downloaded with an interactive report?
  
  Apex to 3.1
  
  Thank you
  
  Graham

  totally different approach would be to add totals to your choice.

  It works for some already very well grouped queries
  Something like

  select e.departmentid, d.name, count(*) emp#, avg(e.salary) sal
  from employees e
  join departments d on d.departmentid = e.departmentid
  group by e.departmentid, d.name 
  

  Displays the number of employees and the salaray average for each Department.
  Now we can add a total row using rollup, or grouping sets

  select e.departmentid,  d.name, count(*) emp#, avg(e.salary) sal
  from employees e
  join departments d on d.departmentid = e.departmentid
  group by grouping sets ((e.departmentid, d.name), ());
  

• Standard report, change report Total text

  Using APEX, theme 26 5, I have a report that I need to change the text and the color of the text report Total at the bottom of the report.  Try dynamic action of charge with the following JavaScript code:

  URL: https://glassfish1.revion.com/apex/f?p=4550:1:2140114088822:

  Workspace: homeworld

  Login: demo

  password: demo

  Request 271

  Page 1...

  As a result, that does not change... I thought that it worked in APEX 4.x, cannot test now because I don't have access to an instance of 4.x...

  Any suggestions?

  Thank you

  Tony Miller
  Los Alamos, NM

  No need for JavaScript or dynamic action (but I think that the distinction uppercase / lowercase is the problem with what you have there).

  Set the required total text of report are Label in the report attributes and specify the color to aid online page CSS:

  #emp-586 .uReport tr:last-child td:first-child {
    color: #c00;
  }
  

  See the second report, which I have added to the page.

• List of all existing columns and then format and data format?

  Hello gurus,
  
  I'm new to OBIEE and I have an obligation to check the format of the column and the format of data for all of the existing column while generating an analysis report. Y at - it anyway I can enumerate all the columns that are exposed and there list column format and the format of data?
  
  To check the column individual properties I know there is an option called 'Properties of the column' but want to know that all at once to go.
  
  Kindly help me and thanks in advance.
  
  Thank you

  I do not think that you have nothing in his answers to get this, go to the repository and utilities-> dictionary of metadata generate giving columns and the data type.

  Assign points if it helps

  ~ Srix

• Firefox starts up. Said 'it's embarrassing... "but do not restore or close because never answers. Updated and restart without help. Cannot access the options.

  Unresponsive. Updated and rebooted without success. Can't seem to 'options' due to no response. Always 'it's embarrassing... "but to restore or close button ends up making inadmissible browser. Closed with Taché also. Can't get into safe mode.
  BP-20b2f065-d592-4b67-8020-7714a2130305

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. »

  I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. "Do you know what is happening here - what could be the problem? (I have the latest version of Firefox already installed. I previously got Firefox error messages indicating "Firefox update failed". However, I already have the latest version of Firefox installed when I got these error messages.)

  I think that we must hope that the problem will be resolved at the present time. If you see the error message again post in this thread. Also, it would be unusual get this message while trying not to update, but if you get if you try to copy and paste the details of console error that they can be useful.

  Use

  • keyboard Ctrl + Shif + J
  • or button-> Web Developer Firefox-> Console errors

  This kind of message is apparently the only normally expected when you try to update to Firefox. It seems strange that you get the message using a 'Œuvres' document, but others have reported this message seemingly random incidents.
  (So normally, you must clear the error console, and then try to update knowing the error messages have been the result of this attempt to update)

  If I had this problem my concern would be that some kind of malware may be involved, but the message can then indicate that all this malicious program is upset.

• Today I received a phone call from 'Human IT Solutions'. The operator said that I had reported an error and asked me to log in

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  ADF, I received today a similar appeal.  When I questioned his information on the company, he was very defensive and said "I have no cold calling, I'm in East London" I asked him to give me the name of the software MS causing errors, during which he compiled a long list of file extensions and avoided the question.  When I asked her name and phone number so I can get my husband to call him back, he began to read a number on phone, but the figures '0-1', the line was cut off.

  I'm sure you made the right choice in putting an end to the conversation of what I lived today.  I have no idea how you would report to Microsoft, but wanted a response to you here to support your actions!

• decimal and the thousand separator for number and currency formats

  Decimal and thousands separators for number and currency formats are not the same, please change your windows settings

  Tab Control Panel / regional and Language Options/Format is used to adjust these. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Mr President, I have vista preinstalled and I formatted now it asks for product key. What can I do now?

  Mr President, I have vista preinstalled and I formatted now it asks for product key. What can I do now?

  The sticker that contains the product key is turned pale as I bought it 3 years ago and I have not written the key anywhere elsewhere.
  Please help me.
  I need the key to activate my windows vista.

  Hello

  If you use the manufacturer or their recovery disk recovery partition should not be required to have an entry of product key when reinstalling back to factory settings

  We cannot help you find a now non-existent product key

  I suggest you contact the manufacturer of the computer

• Windows 7 backup skipped image system because one of the critical-volumes backup cannot be included for backup. Make sure the volume is online and is formatted NTFS. (0 x 81000032)

  After using the backup of Windows 7, I get the following error message:

  Backup Windows jumped backup system image because one of the critical volumes cannot be included for backup. Make sure the volume is online and is formatted NTFS. (0 x 81000032)

  The backup is set to include an image of disk system: RECOVERY, DRIVE (d), OS (c :))

  "RECOVERY, DRIVE (d :))" in car is a partition of 2 GB of the hard drive internal, such as configured by Dell, and it is formatted in FAT32.  I tried to reformat the NTFS volume, but were unsuccessful.  I also looked at a certain way to omit this volume, but have still been in vain.

  Can anyone help?

  Thank you.

  Do not assign a drive letter to the partition recovery/player. Open "Disk Management" and decommissioning (without drive letter) and backup and restore performance.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• In Windows 7, incident reports is off and cannot change settings

  Good people, I have a problem with my page reporting the problems of Windows 7 Home Premium. Incident reports you click OFF (not recommended) and the page where you have 4 choices are grayed out. He said: "some settings are controlled by group policy. It is a PC at home with administrative rights. I even went and created an account with the same privileges and same problem. If you know this problem and can help me I would be very happy. It is the only problem currently with my PC 100% excessive and up-to-date for free.

  Kind regards
  Eric

  Hello

  See the link below which has Windows Error Reporting information and reports on problems and Solutions feature in Windows Vista (for windows 7): http://technet.microsoft.com/en-us/library/cc709644 (WS.10) .aspx

• I have a registration error trying to download a disc. It is said, your operating system Date and time format do not match the expected for PM Fastrack run format.

  Error in saving of the PM FASTrack.
  Impossible to analyze the dayYour operating system Date and time format do not match the expected for PM FASTrack run format. The format should be mm/dd/yyyy hh: mm:. The format is

  It's my complete error message. The time is set in this format on the computer. How should I do?

  Hello Murphy,

  Thanks for posting your question on the Forums of community of Microsoft.
  From the description of the question, I understand this format date and time do not match for PM FASTrack run.
  Let me go ahead and help you with the issue.
   
  You did changes to the computer before the show?
   
  I suggest for the link and follow the steps in the article, and check if this can help:
  Change the display of dates, times, currencies, and measures
  http://Windows.Microsoft.com/en-in/Windows7/change-the-display-of-dates-times-currency-and-measurements
   
  Also, check out the support links:
  PM FASTrack support.

  http://www.rmcproject.com/support/PMP/errors/error4.aspx

  http://www.rmcproject.com/support/support-registration2.aspx

  http://www.rmcproject.com/support/PMP/v7/FAQ-4common.aspx

   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Where to put the report server ip and port for the Siebel server?

  Hello

  Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.

  Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.

  Please help, thanks.

  Hello

  Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.

  Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.

  Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.

  I hope this helps.

  Thank you
  Maria