Reports of empty

Similar Questions

• Scheduled reports are empty

  For some reason all my scheduled reports are coming in empty e-mail.

  I think this started since the new version. Anyone else having this problem?

  Any suggestions on fixing this. I guess if necessary I can recereated scheduled reports.

  Thank you

  _Evan

  This has been resolved Yes Jonas.

  In fact, you have worked with me on this e-mail and a support ticket.

  I have to improve my database... we use the default database that is built into the software.

  Thanks again.

• Change of report fields empty to display by default

  Hi everyone, a Member here for quite awhile, but only really started to use apex, so only I just my connection actually settled. And I changed my username on the forum if it always shows userXXXX when I submit it.
  
  In any case, been researching different as far as I can think and not come with anything that this is of no use, so I thought it was about time I introduced myself and asked my first question.
  
  I use access for the past 10 years and have taught myself everything I know. I started using APEX for about 2 months now and have taught me everything I know to do this too (with obvious help to reading posts on here and Denes Kubicek demo application - Dene thanks its helped a lot!)
  
  In any case my current dilemma is that I have to the table of master records and an array of person. The main table of records holds a created by who uses the person table id and a sign off field by field, which also uses the id of the person table. The person table take a field manager who also uses a table id of the person.
  
  So I have a maintable which, when interrogated will show
  
  RecId - created by - folder signed by
  
  REC1 - person1 - Individu4
  rec2 - person2
  REC3 - channels3 - person5
  
  (the second record in the example above is not yet signed - also each manager of people could change so I'm storing the id of WHO their coach (because their coach must sign the record))
  
  and a picture of the person making
  
  user - manager
  Person1 - Individu4
  Person2 - Individu4
  channels3 - Person1
  
  What I want is a hierarchical list for a report that can be run by each manager to display the records for everyone below them, so I use a collection to extract the person/list manager initially
  for example
  
  -create and populate the collection
  apex_collection.create_or_truncate_collection
  (p_collection_name = > 'HT_1');
  
  
  BEGIN
  FOR x IN)
  Select 'HOSP_PERSONS_1 '. "" PERSON_ID ","HOSP_PERSONS_1 ". "' USER_NAME '.
  of 'HOSP_PERSONS' 'HOSP_PERSONS_1' 'HOSP_PERSONS' 'HOSP_PERSONS '.
  where 'HOSP_PERSONS '. "PERSON_ID"= "HOSP_PERSONS_1". "" MANAGER OF.
  and higher ("HOSP_PERSONS". "User_name") = upper(:APP_USER) "
  )
  
  LOOP
  apex_collection.add_member (p_collection_name = > 'HT_1',)
  p_c001 = > x.PERSON_ID,
  p_c002 = > x.USER_NAME,
  p_c003 = > 'LVL 1'
  );
  END LOOP;
  END;
  
  BEGIN
  FOR x IN)
  Select 'HOSP_PERSONS '. "" PERSON_ID ","HOSP_PERSONS ". "' USER_NAME '.
  of 'HOSP_PERSONS', apex_collections a
  where a.collection_name = 'HT_1. '
  and "HOSP_PERSONS". "" MANAGER "= a.c001
  and a.c003 = 'LVL 1'
  )
  
  LOOP
  apex_collection.add_member (p_collection_name = > 'HT_1',)
  p_c001 = > x.PERSON_ID,
  p_c002 = > x.USER_NAME,
  p_c003 = > 'LVL 2'
  );
  END LOOP;
  END;
  
  BEGIN
  FOR x IN)
  Select 'HOSP_PERSONS '. "" PERSON_ID ","HOSP_PERSONS ". "' USER_NAME '.
  of 'HOSP_PERSONS', apex_collections a
  where a.collection_name = 'HT_1. '
  and "HOSP_PERSONS". "" MANAGER "= a.c001
  and a.c003 = 'LVL 2'
  )
  
  LOOP
  apex_collection.add_member (p_collection_name = > 'HT_1',)
  p_c001 = > x.PERSON_ID,
  p_c002 = > x.USER_NAME,
  p_c003 = > 'LVL 3'
  );
  END LOOP;
  END;
  
  Fell for it in 10 levels.
  
  I then retrieve data from the main table in another collection to show me all the documents created by this list of users.
  
  apex_collection.create_or_truncate_collection
  (p_collection_name = > "HT_2");
  
  BEGIN
  FOR x IN)
  Select 'HOSP_MAINDATA '. ""BENEFICIARY. "
  'HOSP_MAINDATA '. "" ORIGINATOR. "
  'HOSP_MAINDATA '. "" GIFT_HOSP, "
  'HOSP_MAINDATA '. "" NATURE, "
  'HOSP_MAINDATA '. "" DATE_GIFT_HOSP, "
  'HOSP_MAINDATA '. "" REASON. "
  'HOSP_MAINDATA '. "" SIGNOFF_DATE, "
  'HOSP_MAINDATA '. "" CREATED_DATE. "
  'HOSP_MAINDATA '. "' CREATED_BY."
  'HOSP_MAINDATA '. "" VALUE. "
  'HOSP_PERSONS '. "" NAME "| " '||" "" "HOSP_PERSONS '." " FAMILY_NAME"AS"CREATED_BY_NAME. "
  'HOSP_PERSONS_1 '. "" NAME "| " '||" HOSP_PERSONS_1 ". "' FAMILY_NAME" AS "MANAGER_NAME."
  'HOSP_PERSONS_2 '. "" NAME "| " '||" HOSP_PERSONS_2 ". "' FAMILY_NAME" AS "SIGNEDOFFBY."
  'HOSP_MAINDATA '. "' REJECTED '.
  of 'HOSP_MAINDATA', APEX_COLLECTIONS, 'HOSP_PERSONS', 'HOSP_PERSONS' 'HOSP_PERSONS_1' 'HOSP_PERSONS' 'HOSP_PERSONS_2 '.
  where a.collection_name = 'HT_1. '
  and "HOSP_MAINDATA". "' CREATED_BY ' = a.c001
  and "HOSP_MAINDATA". ' ' CREATED_BY ' = 'HOSP_PERSONS. ' "" PERSON_ID ".
  and "HOSP_PERSONS_1". "" PERSON_ID "="HOSP_PERSONS. " "" MANAGER OF.
  and "HOSP_MAINDATA". "" SIGNED_OFF_BY "="HOSP_PERSONS_2. " "PERSON_ID"(+)
  )
  LOOP
  apex_collection.add_member (p_collection_name = > "HT_2")
  p_c001 = > x.RECIPIENT,
  p_c002 = > x.GIVER,
  p_c003 = > x.GIFT_HOSP,
  p_c004 = > x.NATURE,
  p_c005 = > x.DATE_GIFT_HOSP,
  p_c006 = > x.REASON,
  p_c007 = > x.SIGNOFF_DATE,
  p_c008 = > x.CREATED_DATE,
  p_c009 = > x.CREATED_BY_NAME,
  p_c010 = > x.VALUE,.
  p_c011 = > x.MANAGER_NAME,
  p_c012 = > x.REJECTED,
  p_c013 = > x.SIGNEDOFFBY
  );
  END LOOP;
  END;
  
  
  
  I then use the following for the selection of my report
  
  SELECT c001 c002 c003, c004, c005, c006, c007, c008, c009, c010, c011, c012, c013
  Of apex_collections
  WHERE collection_name = "HT_2.
  
  My problem is when my file is not closed then the fields for x.SIGNEDOFFBY ends up being empty (I need the sign (+) external link in there because I still want to see all documents, but when it shows on my report that the field is missing its border.)
  My question is how can I set this up so that if c013 ends up empty then I can display a value default of - n/a or something and so have a border on my report.
  
  Sorry if I'm being thick and giving on something, and I know it's a bit lengthy, but I thought that it better to explain the situation that leave anything out.
  
  Thanks for your time
  
  Dan

  Hi Dan,.

  In your select statement, why not use a box, so that when there is no value in the signed off of the person, you can insert what ever you like the value in this field.

  beginning ommitted
  ..
  SELECT case when "HOSP_PERSONS_2"."FIRST_NAME" IS NOT NULL AND "HOSP_PERSONS_2"."FAMILY_NAME" IS NOT NULL THEN "HOSP_PERSONS_2"."FIRST_NAME"||' '||"HOSP_PERSONS_2"."FAMILY_NAME"
  ELSE 'No Value Given' END "SIGNEDOFFBY"
  FROM from      "HOSP_MAINDATA", APEX_COLLECTIONS a, "HOSP_PERSONS", "HOSP_PERSONS" "HOSP_PERSONS_1", "HOSP_PERSONS" "HOSP_PERSONS_2"
  where a.collection_name = 'HT_1'
  and "HOSP_MAINDATA"."CREATED_BY" = a.c001
  and "HOSP_MAINDATA"."CREATED_BY" = "HOSP_PERSONS"."PERSON_ID"
  and "HOSP_PERSONS_1"."PERSON_ID" = "HOSP_PERSONS"."MANAGER"
  and "HOSP_MAINDATA"."SIGNED_OFF_BY" = "HOSP_PERSONS_2"."PERSON_ID"
  )
  LOOP
  apex_collection.add_member (p_collection_name => 'HT_2',
  p_c001 => x.RECIPIENT,
  p_c002 => x.GIVER,
  p_c003 => x.GIFT_HOSP,
  p_c004 => x.NATURE,
  p_c005 => x.DATE_GIFT_HOSP,
  p_c006 => x.REASON,
  p_c007 => x.SIGNOFF_DATE,
  p_c008 => x.CREATED_DATE,
  p_c009 => x.CREATED_BY_NAME,
  p_c010 => x.VALUE,
  p_c011 => x.MANAGER_NAME,
  p_c012 => x.REJECTED,
  p_c013 => x.SIGNEDOFFBY
  );
  END LOOP;
  END;
  

  Van
  Trent

  (and welcome to the forums... I joined recently too)

• My form of amendment based on my report is empty :-(

  Hello
  
  I have the following problem, have an interactive report on my page.
  I have my left side on my list of data, the usually the edit button.
  If I click on this button, I change to page editing with the fields in the form as in the table to edit this record.
  
  BUT since I changed some on this report as a join in my sql to display the data instead of the f key,
  the edit form is empty.
  
  So if I click the button change in registration and change my form change form is empty.
  but the form should fill with data from the record, but he isn´t.
  
  Someone has an idea?

  Hi markus,.
  Your problem seems that the link was not done correctly. First check the names of the tables in your database and query. If they are ok to go to the edit page and click the report to change the attributes.
  Normally the PK provides the link to edit records. Click on the image to change and down to the link in the column. Make sure you have all selected correctly attributes to extract lines.

  in the link text field: or may choose different
  Target: page of this application must be selected and Page: 1 (page number)
  Point 1: P1_EMP_ID (type the domain you want to retrieve) and value: #EMP_ID #.

  Try again today.

  Hope this will help.

  Thank you
  Djelloul

• Thunderbird activity Manager reports several times the gmail trash Emptied over and over every few seconds. Solved by trash Compact/repair

  First of all, thank you for an amazing product! Life-changer.

  Thunderbird Activity Manager reports repeatedly trash emptied over and over every few seconds. The account he reports that empty the trash has no trash. I have repaired the trash folder, repaired the Inbox folder, compacted the account, does not. I've left Thunderbird worked during 10 hours see if it was a natural process, but the continuous emptied trash messages. The mail folder, I am using for this account occupies approximately 7 GB. Thank you! Mike

  Ignore my suggestion on unsubscribe to solve the problem of trash - you already solved.

• Problem with 'Interrupted' Interactive report and download empty content

  I created a simple sample application to display this behavior on apex.oracle.com.

  WORKSPACE	ICE_SANDBOX
  USERNAME	APEX_FORUM
  PASSWORD	forumApex
  APPLICATION	Interupted_IRR

  We had a need to prevent shooting during the loading of the page of an interactive report. There are a number of messages from the forum for this but, for the most part they came down to this:

  1. Create a page element and include a test for its value in the SQL source of your interactive report, for example P1_RUN_SUPRESSOR = 'RUN '.
  2. Initially, set the value of this element so that it prevents the research report of the corresponding lines, for example "DO_NOT_RUN".
  3. When the required criteria has been set, switch the value of the element of the condition for success page and then refresh the report.

  It's that everything works as it should. As you can see in the sample application, the report is not filled at the start. When you click the run now button, the value of the P1_RUN_SUPRESSOR went from 'DO_NOT_RUN' on 'RUN' and then the region of report is refreshed. As we expected, the lines are all now populated 'normally '.

  However, if you now try to use the upload feature, the content of the report is empty.

  Can anyone think of a fix/work around?

  Thank you

  -Joe

  Set forward the calculation of the areas on P1_RUN_SUPPRESSOR to the not fire not when the query is CSV. I have changed it in your demo application.

• Error 7 with Report Generation Toolkit

  Hi all

  I am trying to generate an Excel sheet report for some readings using the "Generation of reports toolkit", but when you try to generate the report, the code generation report part is executed and gives Error (7) and there is no report is generated.

  The Code I use is attached in the following link:

  https://www.dropbox.com/s/9n4brimucsd0xts/report%20Generation.rar

  Can I get help please?

  Thanks in advance

  I could download and open your compressed file.  I unpacked it in a folder.

  There are many features that lead me to ask "you try to learn LabVIEW on your own, without a mentor and training and orientation?  Here are some of the things that I noticed:

  • Although a generation of .lvproj, .aliases and .lvlps project, open file reports, was empty!  Because projects have been added for LabVIEW, almost all development should be done in a project, but you don't seem to do.
  • You have an event loop (good) to manage the keys Start, Stop and report.  But instead of using Boolean control with a property and using an event "Changed value" latch, you use switch to published (which, so far, I've never used) and a mouse down event.  I guess this could work, but I've never seen this model.
  • You write an Excel report, but do not use the Excel-specific screws (for example Excel easy table).  Why or why not?  The basic idea of an Excel report, is that you create 2D text data, you want to write in Excel, then with a few simple screws, you open Excel, write the Table, and then save the report.  In particular, you do not write something that resembles the columns and rows on a worksheet (Date, time, Test, etc.).

  Now to your specific questions, error 7.  Do you know what means this error?  If you click Help, choose error explain, and set 7, you will see that it means "file not found".  Well, there is a place prominent where a file is used, just at the start of your program.  I recommend that you put a probe (do you know probes?) or an indicator on the way past in the hand for a loop and see what file you are trying to open (hint - there is an error in the way you build the path, but you should be able to understand how to fix it).

  Good luck.  Hope these suggestions you get on a better path.

• Initial value for the interactive report

  I have an interactive report that has a where clause condition clause: where =(:P50_employeeName) used.

  (: P50_employeeName) is a a list of selection without value null. When the page loads the selection list displays the value employee1, but the interactive report is empty. It's not until I select another value within the selection list becoems active report. How I can so when page loading the interactive report shows instead of being blank? I can't the values of hard employee-coding as each user can see only the user in their Department.

  Hello

  Since I don't know all your table structure, it was just a quick sampling of the approach.

  I guess that your LOV would have the correct where clause to control its content, and you can add additional conditions to the IR where clause as well.

  Here is an example of one of my IR where clauses

  the case when: P200_DEPARTMENT = 0 then 1

  When: P200_DEPARTMENT <> 0 and: P200_CREW = 0 and: P200_DEPARTMENT = c.crewdeptkey, 1

  When: P200_DEPARTMENT <> 0 and: P200_CREW | " <> 0 and: P200_CREW = c.crewkey, 1

  end if 0 = 1

  Kind regards
  Brad

• in 10 g reports user settings

  I created a user setting with a list of values, which selects the values from the table that the user will actually pull the data.  After you have created the User parameter, then go to the SQL code of the actual report and put in where x = '(:UserParamater)'.  But when I run the report and select the value in the list, the report displays empty.  When I replace the User parameter and just 'hardcode' the real value, the report runs very well.  what Miss me?

  Oracle reports 10.1.2.0.2.

  Thank you

  Steven

  
  

  You don't need to surround your setting in the quotes, parentheses, etc...

  Your main SQL should look like

  SELECT employe_id, employee_name, date_of_birth

  The EMPLOYEE

  WHERE employee_gender =: gender equality;

  On the assumption that: the sex is the name of your user setting.

• report blank without bi column header Editor

  Hi all
  
  When there is a group (like? > <? for-each-group@section: G_1;) REG? >), the report shows empty without column headers in the table. We want to display the column names in table without data if there is no data. As soon as I did the grouping records, reports shows empty without position if there is no data. Are there additional code that I need to put in rtf?
  
  Thank you
  
  Sushil

  Make sure your Inbox sent the updated code.

  Just give a jump to the end of the code section and use

  No data found

  as g_1 group that brings data u so if you do not rely on this group should be good show no data found.

• Bill of lading, air waybill report

  Hi gurus,
  
  I raised THEN, picked, shipped, while ship to confirm, system-generated 5 programs simultaneously, complete except Bill of Lading, waybill getting output report as empty, no data appears in the report.
  
  If I want to see the data in the report of these two, which updated in the fields are SO form, form shipping?
  
  Are there settings / profile of the options to achieve this goal?
  
  Please advise.
  
  Concerning
  AK

  Hi, AK,
  As told by dadi, 1 is to define the category of Document for the two "Bill of Lading" and "delivery".
  Here, you mention the name of the category and the name of the Document, the sequence of the doc...
  (nav:Shipping--> installation--> Documents--> categories of documents)

  Then assign the document sequence for these 2 categories.
  (nav:Shipping--> installation--> Documents--> assign sequences)

  Since they are already defined in the document set, you will now be able to see the output of these 2 reports.

  Thank you
  -Arif.

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• DBMS_SQLTUNE. REPORT

  Hello
  on the 11g R2 on Win I run in SQLPLUS:

  variable stmt_task VARCHAR2(64);
  
  EXEC :stmt_task := DBMS_SQLTUNE.CREATE_TUNING_TASK(sql_id => ‘4rc7d8c0mvfm8');
  
  EXEC DBMS_SQLTUNE.EXECUTE_TUNING_TASK(:stmt_task);
  
  SET LINESIZE 140
  SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK(:stmt_task) from dual;
  
  DBMS_SQLTUNE.REPORT_TUNING_TASK(:STMT_TASK)
  -----------------------------------------------------------------
  GENERAL INFORMATION SECTION
  ----------------------------------------------------
  SQL>

  The report is empty? Nothing in it? Why?
  Thank you.

  Is it not just the screen being too small?

  Try something like:

  set long 10000
  

  then try again.

• How to print line empty on the model of BEEP when the field has no value?

  I have a BEEP pattern like below and all these CHILDREN, NAME, GRAND_CHILDREN, are fields arranaged in the model as a line. REPS can enter the values in each of these areas for maximum 3 lines. The first 2 rows have values and the last is empty.
  
  CHILDREN: NAME: GRAND_CHILDREN: NAME:
  Son daughter of John Smith
  Daughter Laura son Kevin
  
  In the third row, because the fields have no value, the report print empty lines, but I want to remove this blank line and display only the rows (first 2 rows) that have values for the fields.
  
  Does anyone know how to get around this problem? Please help me solve this problem.
  
  Thanks in advance,
  RV

  Just having a condition in 3rd row, where DependentDD3 is printed.

  -3rd line 1st column
  last column - 3rd row

  This is true for nullity of DependentDD3. If you want to check for all columns and hide, use condition as

• Replace the empty column with ZERO values

  Hi experts,
  
  I'm building a report to display the number of orders per channel / day / hour.
  
  Since a few days one or several channels may not all orders placed against them in which case my report shows empty values in the report.
  
  Ideally, I would have zero in these columns rather than an empty cell.
  
  Sample Qry: -.
  
  Select
  Channel,
  Count (order_num) County
  Of
  SALES_ORDER
  
  Pls help!
  
  
  Thanks in advance.

  Count always returns 0 if no line found or the actual number based on the found rows. You don't even have to NVL them. I think so
  the problem is in your report layout, in my opinion.

  You run query sqlplus, or Toad or sqldevloper and you can see for yourself that the count is 0.

  See you soon.
  VIN.