Reports that generate output Excel do not open under ie8/Oracle Forms

Similar Questions

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• MAIL WILL NOT OPEN IN IE8

  CHARGE OF IE8 RECENTLY AND WILL HAVE PROBLEMS WHEN YOU CLICK ON AN EMAIL ADDRESS ON A WEB PAGE.  WITH IE7, MY EMAIL (MS MAIL) WOULD OPEN A NEW EMAIL WITH THE ADDRESS IN THE ADDRESS BOX.  WITH IE8, I NOW GET A MESSAGE SAYING "UNABLE TO OPEN MAIL AS TOO RESOURCE IS USED OR COMPUTER IS UNSTABLE."  HAVE REBOOTED, CHECK ALL PREFERENCES AND DEFAULT VALUES.  I DON'T SEE ANYTHING WRONG.  WHY IT WILL NOT OPEN MY IE8 E-MAIL PROGRAM?  MODE MY SYSTEM IS VISTA.  Thank you.

  Go to start / programs by default and click on set program access and computer by default.  Choose custom by double-clicking on it. Under e-mail programs, make sure that Microsoft Mail is selected and click OK. Reset.  Then see if that solves the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not open the file [/ oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl]

  When I do a load of level 0 of my office, I get this error?
  
  Could not open the file [/ oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl]
  
  Unexpected error of Essbase 1090004.
  
  Please notify

  When you do a load of data on the client, if the file is not a server file that essbase has copy on the server so that it can load. That's why shipments of server-based file are so much faster, especially for large files. I'm guessing that the ID has no authorization to this tmp directory. The message, it looks like a system Unix-based. Check with your Unix administrator on the permissions on this directory

• Functioanlity of opening SESSION in Oracle Forms 10g

  Form dear gurus,
  
  I need to connect to the DB using Oracle Forms...
  
  So I created 3 text elements for string user and password for connection.
  
  Once you press the button, I use the following code
  Logon(:logon_block.) Username: logon_block. PASSWORD | » @' || : logon_block. CONNECT, fALSE);
  If form_success then
  al_id: = Find_Alert ('WARNING');
  Set_Alert_Property (al_id, ALERT_MESSAGE_TEXT, "Connected); -now display the alert
  dummy_var: = Show_Alert (al_id);
  
  on the other
  al_id: = Find_Alert ('WARNING');
  Set_Alert_Property (al_id, ALERT_MESSAGE_TEXT, "Not connected"); -now display the alert
  dummy_var: = Show_Alert (al_id);
  end if;
  
  Apart from the usr/pwd his success giving only msg...
  
  You please give me your valuable contributions to overcome this problem...
  
  Thank you and best regards,
  
  Durai S E

  Instead of looking for "success of form", try verifies that you have actually connected. For example:

       IF GET_APPLICATION_PROPERTY (DATASOURCE) != 'ORACLE' then
            rtn := SHOW_ALERT ('LOGINFAIL');
            -- Do something here
       ELSE
            rtn := SHOW_ALERT ('LOGINSUCCESS');
            -- Do something here
       END IF;
  

• HTML full report links check accessibility of does not open the corresponding PDF links

  I regularly generate complete reports of the accessibility check to the PDF user guides that create in MS Word. However, when I click on the links in the file/HTML report generated, they are supposed to link/highlight corresponding errors in the PDf file. Instead, I get an error message that 'there was an error opening this document. Bad parameters. »

  How can I get the links to work so I know what section in my PDF error (inaccessible items).

  Thank you

  I understand that you create HTML reports and then use them to find errors/display PDF files.

  Is this a new problem or have you always had problems with the links?  If this is a new problem, what has changed on your system?

  Can you see other PDF documents in your browser?

  Have you moved your files since you created the report - as you know the references of the HTML report to a specific location on your hard drive and if you moved the PDF file after creating the report, it is perhaps not able to find the file.

• Microsoft Word documents and Excel will not open

  Hello
  Im not sure what happened, but for the last few days everytime I try to open a microsoft word or excel document program is unresponsive.    He then says that windows cannot find the .doc and make sure the name is typed correctly.

  When I close word it gives me this additional information on the problem.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangXProcB1

  Application name: WINWORD. EXE

  Application version: 9.0.0.3822

  Application timestamp: 38b 56792

  Hang Signature: 787

  Hanging Type: 32

  Waiting on the name of the Application: TCrdMain.exe

  Waiting on the Version of the Application: 1.0.0.7

  OS version: 6.0.6000.2.0.0.768.3

  Locale ID: 4105

  Signing of additional blocking 1: e58d67f67fc2632c57b42435cebe942d

  Signature of blocking additional 2: 517 b

  Signing of additional blocking 3: 661ad9c576f75b32fcee9168961d38fa

  Signing of additional blocking 4: 787

  Signing of additional blocking 5: e58d67f67fc2632c57b42435cebe942d

  Signature of blocking additional 6: 517 b
  Signing of additional blocking 7: 661ad9c576f75b32fcee9168961d38fa

   

  Hello GIS_Person,

  Thank you for using the Microsoft answers Forum

  Is this a recent installation of Word or this facility has been working properly for a long time? What is the version of Office 2003 or Office 2007 Word? You have recently installed another program that could interfere with the functionality of Word? You could try to save all your Word documents, make sure you have the product key and the available media and then uninstall and then reinstall the program to see if that solves the problem. Have you tried to open documents on another machine and see if you get the same response from the file?

  You can also try a system restore to an earlier point, who could return to a time before the problem occurred. I am including the instructions below to access the system restore.

  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Generated html code does not open in firefox/safari when incorporated into an iframe

  Hello

  I was mingling with robohelp for a few weeks now. I can generate a html from a Framemaker book end site. It is integrated in an < iframe > integrate into our website. It works fine on chrome. "However I get on firefox/safari is all ' i ' '. View the source, it becomes obvious that this weird bunch of characters appears before the < html >. I looked into the real generated html code and I see this < feff > tag prefix before the < html > in each file. Naturally, I advanced and removed and the page will now load correctly on firefox/safari. However, the balls are all screwed up. I read a post somewhere that says < feff > contains information about the css classes.

  I use techniques Comm Suite - 3.5(full_version). The webhelp html code is generated using the framemaker publishing feature using a file of saved settings *.isf.

  So, how to fix this? Any suggestions are welcome.

  Thank you

  The "bunch of odd characters" is known as the BOM (Byte Order Mark). The problem is on the server.

  I saw the same thing when you first use RoboHelp 8 and this is what I have been told by the company that hosts my site.

  "I would therefore conclude that the solution to this problem (on Linux systems running Apache) is to add the directive AddDefaultCharset utf-8 on the site's .htaccess file or the Apache config. The advantage of the latter is that it affects only the individual sites. The Apache default character set comes from the file of locale on Linux and defaults to iso-8859-1. It is the conflict between the Apache header with iso-8859-1 and utf-8 character page, which obviously causes problems Firefox. »

  In a post on the chrissy_tissy forum added

  My machine is Windows, but this still worked correction - some notes on post-porn the fix:

  1. make the fix itself (httpd.conf: AddDefaultCharset utf-8).

  2. restart the box to apply the hotfix.

  3. once the box is restarted, clear your FireFox cache to ensure that you do not continue to see the cached file.

  Once all this is done, you will see the contents of output as expected.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Excel does not open.

  My computer is very slow and may be unstable.  I am running Windows 7 Home Premium and trying to open Excel.  After awhile, the title bar displays "Microsoft Excel non-commercial using."

  Why this happens, and why I can't open the program Excel and files?

  Omaha

  Well, you did that there is no virus/malware activity.

  Now maybe you should undergo an Excel/office repair.

  https://support.Office.com/en-AU/article/repair-an-Office-application-7821d4b6-7C1D-4205-aa0e-a6b40c5bb88b

• Run two reports, but generate output

  I have developed two reports, one is a detail (portrait style) and another is a synthesis report (landscape). Now, I need to provide an option that will run reports but display the output in a single document (the document must contain the details and analytical content).
  
  Ideal scenario would be to call the report one after the other, but the output in a capture file, but I don't know if it is possible in the reports.
  
  Any help is appreciated. Thanks in advance.
  
  Sundar

  go to the Navigator object, expand the model layout, you would see the three Sections, header, hand and trailer. Use two of them to your needs.

• Activation problems! Code __Error: 0xC004F050... The Software Licensing Service reported that the product key is not valid.

  I can't activate my OS. I use Windows Vista home premium, Service pack 2 (6.0.6002). I've been using that copy of Vista for over a year now without any problems of this kind. But now it seems that the product key - that came with the dvd when I BOUGHT it - is now invalid. I made sure that I didn't type in evil, but still the same issue. I tried to restore to a point earlier this afternoon, and once I failed tried to restore the system to a point, 2 days ago, but still not good. I thought he would have noticed in settings at that time at the time that my OS was still valid, but no.

  The error began just after I had a problem during the game Flight Simulator x, and I was forced to shut down the computer because the game froze. I do not have a GPU, I use shared graphics memory and I think that I have would be overloaded or something. But when I went to start windows again, after that I selected "start windows normally", he asked me for the product key and the rest is history.

  See you soon!

  magiva

  Yeh that did not work, BUT cause the just dissappeared. See, problems sometimes just disappear!

  Here is what I tried:

  Enter the product key, after that I was invited to get in - that I found on the sticker on the side of the Tower. came up with the error that is the title of this thread.

  activation of vista via phone (as has been mentioned in the previous post). I couldn't find any activation ID. as I said before, there were nine empty groups, labeled as 1-9 - I had nothing to enter.

  tried to restore the system to a previous date: 1stly early in the afternoon, when everything was still ok. that did not work. then I tried a date that was two days before and that no longer works. It didn't work because the actual restoration process has not successfully completed - an error has occurred, so I'm not a not actually restore at any earlier date at all.

  has rang tech support and the guy was just as confused as I was at my lack of installation ID. He forced me to check a few other things, and then he forced me to restart it... then a 2nd time to make sure, as he was about to try something else.

  I logged in the 2nd time and wahllaaah! Back to normal, just had to put a round back photo upward once again, because the Office was all black - like what happens when you don't have a copy authentic Vista I guess. the guy said, after I interrupted him let him not the problem only "disappeared", his answer was ' really? OK, well, Sir, if you have problems in the future, please contact us again and just to mention the case number that gave you".

  Hey interesting? someone tell me why this happens?

  magiva

• Photoshop 3 rd party pluggin that worked but now does not open.

  I have a Player that works with photoshop, but now when I try to run it, it opens and closes immediately. Ive tried to re - install the app, but answer always the same way... opens and closes. My next step is to re - install photoshop. He had worked for at least a year but now I am having problems. Any suggestions?

  Hi IP.

  If it worked for you then for sure Plugin is the problem and you can try to reinstall if it always breaks PS then you must contact the manufacturer of the Plugins.

  ~ Rohit

• Can you implement an action that generates output a jpg file for each of the 14 work plans?

  I have an AI CS6 file with 16 work plans. I need to "save for web" a jpg of each work plan. Is there a way to automate that, by setting up an action - or is it possible to do this? I'll have to do it frequently. Thank you very much!

  Monika Gause says:

  Don't file > export > JPEG, helps to "use work plans?

  HA, ha, there go. No need to post the script now. (My eagerness to script forgot built elements in ;-))

• MS Server 2012 error 0xC004f050 The Software Licensing Service reported that the product key is not valid

  PLEASE SOMEONE HELP ME!

  This Windows server 2012 have formerly key license and smooth, but when I try to activate KMS or Volume Activation and install an update I forgot already, then all of a sudden, it starts to show the error build 9600. So I decided to run slmgr /upk to unistall to license, but when I tried to re - activate the license, this error appeared. I tried to activate it by Slui and in CMD, but still no luck. Someone please help me with this.

  amplifier

  
  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Adobe Photoshop Elements 13 does not open under El Capitan 10.11.1

  Hello

  We have updated our Adobe Photoshop elements 13 stopped working and El Capitan 10.11.1 on Mac Book Pro (mid-2014). There is a long error message. Somewhere I read, that this problem is related to apple security certificates. You know, if it was already resolved? Or are there measures described what to do to fix?

  Thank you very much

  Ales

  alesreich wrote:

  Hello

  We have updated our Adobe Photoshop elements 13 stopped working and El Capitan 10.11.1 on Mac Book Pro (mid-2014). There is a long error message. Somewhere I read, that this problem is related to apple security certificates. You know, if it was already resolved? Or are there measures described what to do to fix?

  Thank you very much

  Ales

  The post on the blog of Barbara Brundage has been reported to fix the problem.

  12 items: no more opens on MacOS 10.10.5 (AppStore Mac expired certificate)

  November | 2015 | Barbara tri-de-Tech blog