Request for certificate signing request

Similar Questions

• After reformatting and installation, activation, I get a message that I don't have a valid copy of XP. Get errors from each Web site for certificate errors. Any ideas?

  Validation problem

  After reformatting and installation, activation, I get a message that I don't have a valid copy of XP.  Get errors from each Web site for certificate errors.  Any ideas?

  I think I found that the time and date on the pc was showing Jan of 2002.  Seems to be loading of updates now!  I hope that this will solve.

• When I try to move a file of premises for the sign from cloud to cloud still negative?

  When I try to move a file of premises for the sign from cloud to cloud still negative?

  Hello

  Please see useful fair questions: where can I find links to management and creative Cloud files synchronization?

  Hope that helps!

  Kind regards

  Sheena

• How to make a link to send to my website for an elegant form fillable and electronic for several signing sessions and downloads from our Web site?

  How to make a link to send to my website for an elegant form fillable and electronic for several signing sessions and downloads from our Web site?

  Hi stacey1246,

  You can create an interactive PDF form & publish it on your website interactive Edition PDF web forms. Use the same to collect data of forms using Adobe Acrobat and form on the web.

  Kind regards
  Nicos

• How to reset or recover my password for the signing of an electronic document?

  How to reset or recover my password for the signing of an electronic document?

  Your only option is to remember. Adobe does not have a recovery tool or allow you to change it unless you know the current password.

• Generate a Certificate Signing Request on UCS C220 M3 running MMIC 1.5 (4th)

  Hello

  I have a couple of servers UCS C220 M3 and to install certificates on them.

  CA will not issue certificates with a 1024 module that seems to be the default created when generating a signature request using the GUI. The GUI I cannot put the module to a higher value.

  I searched in the CLI, but it doesn't seem to be an option to do here.

  The CLI guide said that there should be an 'extended security' cli command that would allow me to do this, but it is not present on my server of series C, so I think it might be available on the B series servers?

  Anyone know if it is possible to change the module to 1024 which generation CSR on this model of server?

  Thank you

  See this thread for more information - it has developed recently:

  https://supportforums.Cisco.com/discussion/11664446/importing-CIMC-SSL-s...

• RV220W does not generate status field in the Certificate Signing Request

  Latest firmware RV220W.

  I can't get this to generate state information in a CSR. I tried everything, including just S = NA. When I run the present through a CSR decoder status information is missing. My CA will not accept the request. We never saw it?

  Hello

  Try to use ST =, instead of S = for the part of the State.

  Kind regards

  Bismuth

• Certificate signing request

  Hi all! : Hi:
  I use openssl to sign the application of erificate in this way:
  OpenSSL ca-passin' pass: 5234590-policy policy_match-out 1. CRT - infiles 1. CSR
  Please help me: how to generate the certificate that must protect just e-mail?
  Sorry for my bad English
  
  Thanks to recommend it!

  You need to activate extensions, in particular the extension of use of extended with only the defined emailProtection key to enabled.

• How to generate a certificate signing request (CSR)?

  If I buy a SSL in godaddy, how to generate the CSR? If my site is hosted in British Colombia, which is the web server? I had a few sites search for the name of the web server, and it appears as unknown each time.

  Hello

  You cannot host your own certificate SSL on Business Catalyst at this stage.

  When you upgrade your site with an online store and shopping cart, you don't need to worry about purchasing a SSL certificate. In fact, this system does not support third-party SSL certificates because every SSL certificate is defined on a single server, and for the online site hosting servers are built in big clusters. purchase a certificate for each server would be prohibitive.

  When a customer purchases items on your part, the system uses the secure URL that is included with all sites to ensure that the number of the customer credit card and other personal information entered ions an online site are protected using Secure Socket Layers (SSL) technology.

  More details:

  http://forums.Adobe.com/thread/984496

  http://KB.worldsecuresystems.com/kb/secure-URLs.html

  If you need an update or more information about the same depth, please get in touch with the support of British Colombia team and they will help out you.

  Thank you

  Sanjit

• can not connect to CC - request for a sign in then past to LR 6, tried several times, sometimes request you a trial license

  I try open LR CC, but he asked a trial license, sometimes the connection, I get a successful connection, but computing launches LR 6

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• [Q] how to build and install an SSL certificate signed for the management of a Cisco 5508 WLC?

  Our security policy requires that all web pages admin must be signed by our CA business. I have successfully implemented a SSL certificate 3rd party Auth Web our WLAN of comments, but I need to install a self-signed certificate for the management of the WLC himself. I followed the instructions here:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

  but it was more useful for Web auth. I can't find a specific document explaining how it should be done for the management interface.

  Any help much appreciated.

  (1) Please use a password. Empty passwords regularly give problems.

  (2) you don't recombine the key with the certificate before you download to the WLC:

  Combine the CA.pem certificate with the private key, and then convert the file to a .pem file.

  Type this command in the OpenSSL application:

  openssl>pkcs12 -export -in CA.pem -inkey mykey.pem -out CA.p12 -clcerts
  
      -passin pass:check123 -passout pass:check123
  
      
  
      !--- This command should be on one line.
  
  
      openssl>pkcs12 -in CA.p12 -out final.pem -passin pass:check123 -passout pass:check123
  
      

  Note: In this command, you must enter a password for the parameters -passin' and -passout . The password is set to the setting -passout must match the setting SubscriptionId is configured on the WLC. In this example, the password is configured at the time the -passin' and settings -passout is check123. Step 4 of the procedure in the section download the WLC third certificate of this document deals with the configuration of the SubscriptionId parameter.

  The final.pem is the file that is transferred via TFTP to the Cisco WLC.

  Now that you have the certificate of the third-party CA, you must download the certificate to the WLC.

• Cannot find the file .csi for code signing

  I'm new to the development for a Blackberry. I get the following error message when you try to build an application that uses a persistent store.

  WARNING! : reference to the class: net.rim.device.api.system.PersistentObject requires the signature with the key: RIM API implementation

  I found that I'm supposed to have a .csi file from when I registered with the area of the developer, but I'm not. Can I request a new one or what?

  Thank you

  Jason

  You can buy rim, code signing certificates.

  The process details are here: http://na.blackberry.com/eng/developers/javaappdev/codekeys.jsp

  Form of payment etc. is here: https://www.blackberry.com/SignedKeys/

  Once you have paid and submitted your application, it takes a few weeks to receive the keys. If you use eclipse, you can then install the keys in your IDE.

• Native installer with ID Apple Developer certificate signing

  I am signing my AIR OSX app with Flash Builder to 'Export Release Build' 4.6 option. For this I use certificate 'Developer ID application' Apple in order to install and run my application on OSX 10.8 Mountain Lion.

  After you have identified the correct certificates in the chain and exporting all p12 format (I chose 'Developer ID of Application', 'CA Developer ID' and 'Apple Root CA' within the Keychain Access on my Mac application) I got the following error: "error of creation of the native installer: packaging failed.» Make sure that your computer's time is synchronized and your certificate is valid.

  Does anyone has idea how to properly sign the AIR applications using certificates Developer ID?

  Yes, I did. I created Apple Developer ID request certificate on the Apple web site. I imported this to Keychain Access by double-clicking the .cer file downloaded. I also checked that I had installed the certificates Developer ID certification authority CA root and Apple. Then I used utility codesign of the terminal to sign all the binaries in the .app folder and the folder itself. In my case that boiled down to:

  Codesign f - v s ' Developer ID of Application: Company Inc. "'Install My App.app/Contents/Resources/MyApp/Contents/MacOS/MyApp."

  Codesign f - v s ' Developer ID of Application: Company Inc. ""Install MyApp.app/Contents/MacOS/Install MyApp.

  Codesign f - v s ' Developer ID of Application: Company Inc. ""Install MyApp.app ".

• Assign roles to users for SINGLE sign-on integrated

  Hi all

  I'm trying to assign roles to users of the SSO, but I can't. I reached this local and LDAP users, but not for users of SINGLE sign-on (I want to use my AD users but without LDAP configuration)

  My platform is vCenter 5.5 U1 for SSO, vCAC camera + server IaaS and vCAD appliance. When you save your vCAD with vCAC you can use integrated vCAC SSO authentication. But, how can I assign roles to users of SSO?

  I can access vCAD with AD users via integrated authentication for SSO, but all options are read-only.

  Best regards

  Jose Luis Gomez

  Hi all

  Auto answer.

  When you have saved your vCAD with vCAC, new roles appears in vCAC. The roles are:

  • Applications architect
  • Request catalogue administrator
  • Director of Cloud applications
  • Deployer and publisher of the application
  • Director of application system

  You can apply this role to users or groups, but always vCAC--> Administration--> groups/users

  Best regards

  Jose Luis Gomez

• How can I sign a form before sending it to a client for e-sign of the dashboard?

  I send you a request for a client and I need to sign in three different locations prior to sending the document must be signed by a customer in e. If you please do that make my life a lot easier and save a ton of paper thanks.

  Hello

  If you plan to sign the document first and request additional signatures, please follow the steps mentioned below: -.

  -Login to your account to eSign

  -Go to send tab

  -Type the email address of the recipient

  -Select I need sign (entered first order)

  

  -Download the document

  -Check the Preview, position the signatures or add form fields

  (If you want to position the signatures and form fields)

  -Click next

  -Place the signature fields

  -Change the role of signature to E-sign by you field

  -Click Save - following

  

  -Application of your signatures

  

  -When you have finished your signatures, document will be sent to the following signatory

  Kind regards

  Mohamed