[REQUEST] Validation of PPR

Similar Questions

• Value using request validation

  Apex 3.2

  I have a create/update form with some fields of date.

  I added validation to make sure that these are the date using the (the specified element is a valid date) standard validation type.

  These have a query condition is contained in the expression 1

  Expression 1 = SUBMIT, CREATE

  All these work very well.

  I need to add other validations, i.e. a single date must be greater than another date.

  I used a validation function that returns a Boolean

  If to_date (": P3_PROMOENDDATE, ' dd.mm.yyyy") > to_date (": P3_PROMOSTARTDATE, ' dd.mm.yyyy") then

  Returns true;

  on the other

  Returns false;

  end if;

  These have a query condition is contained in the expression 1

  Expression 1 = SUBMIT, CREATE

  Now if I enter dates in the correct format, the 2nd validation above works, but if I get the wrong date format.

  That is to say, ffff. Then 2nd validation errors

  ORA-01858: a non-digit character was found here where was waiting for a digital

  Error

  ERR-1021 cannot run the validation of the "body of the function that returns a Boolean.

  I tried to change the condition of no validations inline display and added the code to my validation, to consider the request.

  If: REQUEST to ('CREATE', 'SEND') then

  If to_date (": P3_PROMOENDDATE, ' dd.mm.yyyy") > to_date (": P3_PROMOSTARTDATE, ' dd.mm.yyyy") then

  Returns true;

  on the other

  Returns false;

  end if;

  end if;

  I still get the above error

  Gus

  Gus C wrote:

  My date format is DD. MM YYYY

  If I use this code

  declare

  date d;

  Start

  d: = to_date (: P3_PROMOENDDATE, ' MON-DD-YYYY "");

  The mask format used here must be identical to the one used in the element.

  Returns true;

  exception

  while others
  then
  If sqlcode between 1899 and-1800
  then
  -Date format error
  Returns false;
  on the other
  -Unexpected error
  lift;
  end if;

  end;

  I get the error

  ORA-01858: a non-digit character was found here where was waiting for a digital

  When you use this code? This error should be caught by the exception handler in the block. It is likely that it is actually triggered elsewhere. Check the debug trace.

  I expect the validation code to look like:

  begin
  
    return to_date(:P3_PROMOENDDATE, 'dd.mm.yyyy') > to_date(:P3_PROMOSTARTDATE, 'dd.mm.yyyy');
  
  exception
  
    when others
    then
      if sqlcode between -1899 and -1800
      then
        -- Date format error
        return false;
      else
        -- Unexpected error
        raise;
      end if;
  
  end;
  

• Type of application for extraction in request Validator

  Hello
  
  Is there a way to retrieve the request type (assign roles, Self assign roles, roles Remove etc...) in the validator of the application. I want different validation according to the type of application?
  Help, please.
  
  
  Thank you
  SID

  You can use the RequestTemplateService API:

  RequestTemplate reqTemp = reqTempService.getTemplate (requestData.getRequestTemplateName ());
            
  Logger.Debug (className, methodName, "Type of request: reqTemp.getModelName ()"+ reqTemp.getModelName () ');

  Thank you
  Suren

• I received donations of Mozilla applications. Is this normal or request valid?

  A non-profit, Mozilla Foxfire needs to donate $3 for its users to continue to support another year.
  Also an option to donate larger amounts or make a monthly donation.

  The link to donate appears sometimes on about:home or another Mozilla Web sites.

  It is a normal behavior, as Mozilla is a non-profit that works with donations. Mozilla you don't make a donation in order to use our products.

  If you are skeptical about the legitimacy of a request for donation of Mozilla, feel free to post a screenshot of the donation page and a link to it, and we can check if it is true or false.

  The site of donations is usually sendto.mozilla.org.

• HFM 11.1.2.2 request Validation

  We have created an application of HFM (EPMA) and try to validate the application

  but we see an error when we validate the application

  The error is as below

  Error: There must be exactly one dimension with a value of 'A' for the property to use for the currency and exactly a dimension with a value of 'From' for the property to be used for the currency.

  Where can I find these properties and where to set these properties?
  We have tried to create new property, but it does not let us associate any dimension with it when creating new property

  Thank you

  ARP

  Hi ARP.

  You will need these properties added for the conversion of currencies (even if you don't use it).

  What you want to do in the library of Dimension EPMA, is click on the custom dimension 1, as shown below.

  

  Then in the Properties window, change "Use to change" from.

  

  Do the same for the personal 2 dimension and set it on to.

  After that, you should be able to deploy (assuming that no other problem of validation).

  Thank you

  Erich

• Request validation module

  Hello
  Is someone met the Requirmente of VAM, VVO, Expert of the entity?
  
  where we use the OAF features in application?
  
  Thax

  Check this method in the entity class Expert:

  SupplierEntityExpert

  Thank you
  -Anil

• Validation Windows xp problem

  After my pc on windows today request validation and when I try to validate what he says that my windows xp is not valid when it is without a doubt.

  dwilcock,

  Forum WGA Windows XP Genuine Advantage Validation issues (Windows XP)

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads>

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install?page=1&tab=no

  04/30 / 1105:16: 17 am

• Validations of apex

  Nice day
  
  Given that we can define the error message for the constraints, what is the advantage of using Apex validation?
  -Postings that may be made to the DB level
  
  Kind regards
  Water

  I see that you have added since this line to your OP
  >
  -Postings that may be made to the DB level
  >

  Postings in DB (or constraints) and request validations are not one substitute for the other.
  Very often, we have an overlap between the two, NOT NULL being a case to prove the point. You check in the Validations as well as maybe NOT NULL constraint on the column. It's not really redundant because Validations are related to an interface, then the constraint of the DB is independent of the interface, for example apply to updates from SQLPlus or SQLDeveloper or JDBC as well.

  If you have Oracle Forms, JSP, APEX applications, etc. all access the same tables (nothing unusual about), then the postings are written in all front-end interfaces and critics also in the comic book.

  See you soon,.

• Is - this validator application works in OIM11.1.1.5

  Hello
  
  We apply validator here ask OIM11.1.1.5. All the plugins/configuration are prepared that we use to OIM11.1.1.3. Here the request validator goes off but on throwing exception system is always submit the request and no error is thrown for the user. Is there a known problem with validator asked IOM 11.1.1.5.
  
  -Swati Pandey

  Hi Swati.
  Make sure the following points.
  1 must have the Correct def plugin points scheme. I'm not seenig schemma def in the plugin.xml
  
  
       
            
  version = "1.0.1" name = "TestVld" >
            
       
  
  2 here is the code example. Don't forget the exception is of type oracle.iam.request.exception.InvalidRequestDataException

  @Override
  Public Sub validate (reqData RequestData) get {InvalidRequestDataException}
  If {(validationFail)
  String msg = "xyz".
  InvalidRequestDataException ex = new InvalidRequestDataException (msg);
  throw ex;
  }
  }
  3. message writing in file attachments simply show the useful msg. Even if you will not write to the file attachments, you should get the STANDARD exception message.

  Just to be sure about the above point, delete the old plugin-purge cache, deploy new plugin-purge cache - server IOM. Also write a few new sys so that you can be safe for the new plugin has been deployed.

• Validation of the standby system with the status of 'Provisioning queue'

  Hello
  
  I'm trying a "Service account" a provision of the target (OID) of the IOM help resource application. After request, "Validation of system" task shows as "pending" status; and 'Status' is "Queued Provisioning" for the cases below:
  
  1. same values for user ID, first name, family name (E.g. TESTINGUSER001).
  2. different user with the same name ID, name.
  
  If we give different values, then it is put into service in order to successfully target. Can someone let me know why the behavior is so? It's very urgent.
  
  -Katty Mutya.
  
  Published by: 824250 on February 17, 2011 01:42

  Can you check length assigned in the form of object or process of your attributes.

• ICloud trouble verification password

  After that I get valid request validation of password message disappears for a short period and then reappears.

  

  Hi NickInWonder,

  Looks like you have a problem to stay connected to iCloud on your MacBook Pro and he keeps asking to enter your password every few minutes. Is this fair?

  At this point, I suggest that you log out of the iCloud account, restart the computer and try connecting to iCloud, again to see if this problem persists. This page shows the logout button in system preferences > iCloud - iCloud - Setup - Apple

  If the problem persists, try changing the iCloud account password - iCloud: change your password

  Thank you for using communities of Apple Support.

  Best.

• vrealize 6.2 unable to connect on any tenants, can connect to the default tenant

  Helping people, I've been scratching my head for 4 days now.

  Environment

  DC - 2012

  Vcac-device 6.2

  identity device 6.2

  IAAS services on windows 2012

  also haven't tried with vcenter sso sso no chance.

  It is a new environment

  the good:-I can connect to the default tenant with the account admin and all domain account that I add access to.

  the BAD

  All new tenants, I create, I am unable to connect to

  I get the error

  401-Unauthorized: access is denied due to credentials not valid.

  You don't have permission to view this directory or page using the credentials you supplied.

  -J' tried to rebuild at least 10 times (about to abandon VCAC and start learning the IAC :-/) - (ran the 6.2 prereq everytime script)

  -all servers are NTP synchronized without delay.

  -All DNS entries are in place with the research front and rear.

  -all services 28 show such registered unit VCAC

  -no error in catalina.out vcac device

  -Although I am accessing a link of tenant https://Vcac-IAAS/Shell-UI-app/Labs -(laboratoires est mon locataire)

  Catalina.out shows holding = "vspehre.local"

  2015-01-22 01:22:13, 915 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 8 ' holding ="vsphere.local"] com.vmware.identity.websso.client.MessageStoreImpl.add:221 - added new entry MessageStore: %s, the size of the store: %s

  2015-01-22 01:22:30, vcac 276: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.endpoint.SsoResponseListener.consumeResponse:77 - you POST'ed to the Websso client library!

  2015-01-22 01:22:30, 276 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validate:72 - SAMLResponse validation...

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.ValidationState.validateDestination:64 - destination request validation: HttpservletRequest destination = https://Vcac-app.ten.local/Vcac/SAML/WebSSO/ssoSAML message destination = https://Vcac-app.ten.local/Vcac/SAML/WebSSO/SSO

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateInResponseTo:158 - optional validation request ID: _cc2719796497ca852f426b742b4a79fe

  2015-01-22 01:22:30, 303 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateAssertion:180 - assertion validation...

  2015-01-22 01:22:30, 304 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SamlUtils.getIDPCertByIssuer:944 - IDP is config for: https://Vcac-ID.ten.local:7444/WebSSO/Saml2/metadata/vSphere.local

  2015-01-22 01:22:30, 304 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SamlUtils.validateRequestSignature:597 - signature verification SAML message...

  2015-01-22 01:22:30, 305 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:247 - statement analysis...

  2015-01-22 01:22:30, vcac 317: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:319 - NameID: [email protected]

  2015-01-22 01:22:30, 318 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.parseAssertion:320 - NameIDFormat: http://schemas.xmlsoap.org/claims/UPN

  2015-01-22 01:22:30, 318 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validateAssertion:231 - affirmation of SSO successfully validated

  2015-01-22 01:22:30, vcac 319: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.SsoValidationState.validate:105 - validated successfully received SAMLResponse

  2015-01-22 01:22:30, vcac 319: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.identity.websso.client.MessageStoreImpl.add:221 - added new entry MessageStore: %s, the size of the store: %s

  2015-01-22 01:22:31, 477 vcac: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl.acquireTokenByCertificate:467 - successfully acquired for the user token: {name: administrator, domain: ten.local}

  2015-01-22 01:22:32, vcac 036: [component = "coffee: shell" priority = "INFO" thread = "tomcat http - 51 ' holding ="vsphere.local"] com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl.renewToken:531 - token successfully renewed for the user: {name: administrator, domain: ten.local}

  I tried to start the deafult Web site using my Vcac-service account (in Internet Information services Manager).

  -all certificates are self-signed

  stores - identitiy are tenant default configured correctly and working for

  -All virtual machines running on SSD without isssue IOPS / s.

  -all licenses have been configured.

  -NO errors in the IIS logs

  MSDTC - without errors or questions

  -MSDTC running on SQL server and server IAAS

  Authentication - MSDTC defined on mutual authentication (also haven't tried no authentication)

  when I try to browser goto https://fqdnofiaas/vcac(shell-ui-app) (from the host local or server IAAS) I get

  you have no power to view this page. the system records all attempts to inappropriate access.

  I suspect the question to an IIS misconfig or any Advisor of Bug?

  THX

  https://Vcac-IAAS/Shell-UI-app/Labs https://Vcac-IAAS/Shell-UI-app/Labs You must have add org/orgname https://vcac-iaas/vcac/org/labs

  https://vcac-caf e, vcac, org, orgName for orgs no by default.

• view not be created in short 3.1

  Hi all

  I am trying to create a new view in short 3.1 but I get error below:

  "Could not execute request view config service. This happens usually when a config view no service request valid, or when reading Oracle short server receives a request for configuration display service. "Error message: OES - 000183: dependency"EPC"is missing."

  The view definition is

  DEFINE events that

  SELECT "EVENT_TYPE" AS "EVENT_TYPE"

  "BUSINESS_STEP" AS "BUSINESS_STEP."

  "DISPOSITION" AS "PROVISION",

  'ACTION' AS 'ACTION ',.

  "BUSINESS_LOCATION" AS "BUSINESS_LOCATION."

  LOCATION AS "PLACE."

  LOCATION_DESCRIPTION AS "LOCATION_DESCRIPTION."

  LOCATION_TYPE AS "LOCATION_TYPE."

  "EVENT_TIME' AS"EVENT_TIME,"

  "RECORD_TIME" AS "RECORD_TIME."

  "TOP_LEVEL_EPC_CODE" AS "TOP_LEVEL_EPC_CODE."

  Count (event_id) AS "CODE_COUNTS."

  "EVENT_ID" AS "EVENT_ID".

  From EPC Code

  EVENT_ID GROUP

  Can you get it someone please let me know how to solve this problem.

  Thank you

  Amrit

  I think that from 3.1 if you are a grouping the results of a view, then all your display attributes must have an aggregation function. Maybe that's your problem.

  If you simply copy the value of an attribute of the base view your custom view, without needing to do a real aggregation, then you will use the ARB.

  This is mentioned in the guidelines for the use of EQL to define a viewthat includes an example.

• How to measure how much "commit implicit group" took place?

  Hi all.
  
  The BP is 11.2.0.3 on a linux machine.
  
  As far as I know, when multiple sessions lance "commit" at the same TIME, oracle is committed "IMPLICIT group."
  instead of making each commit unique.
  
  = > the ' commitments of the user "for each request validation.
  
  How can I measure how much "commit implicit group" occurred?
  Is not "lot of explicit validation.
  

  10:06:03 SYS@HOHO>select name from v$statname where name like '%commit%';
  
  NAME
  --------------------------------------------------------------------------------------------------------------------------------
  user commits
  commit cleanout failures: write disabled
  commit cleanout failures: block lost
  commit cleanout failures: cannot pin
  commit cleanout failures: hot backup in progress
  commit cleanout failures: buffer being written
  commit cleanout failures: callback failure
  commit cleanouts
  commit cleanouts successfully completed
  commit txn count during cleanout
  commit batch/immediate requested
  commit batch requested
  commit immediate requested
  commit batch/immediate performed
  commit batch performed
  commit immediate performed
  commit wait/nowait requested
  commit nowait requested
  commit wait requested
  commit wait/nowait performed
  commit nowait performed
  commit wait performed
  IMU commits
  cell commit cache queries
  cell transactions found in commit cache
  cell blocks helped by commit cache
  OTC commit optimization attempts
  OTC commit optimization hits
  OTC commit optimization failure - setup

  Thanks in advance.
  Best regards.

  869578 wrote:

  How can I measure how much "commit implicit group" occurred?

  You can not - there is no way to derive an accurate measure of available information.
  However, a session which issued a commit (or rollback) go into a wait for "log file sync", and publishes the journal writer "again written ' to copy the log to disk buffer. so as you ignore the errors introduced by the second 3 timeout, or 1 MB, or relaxation space of 1/3 and then the number of expectations on "log file sync" less the value of the statistic of the system "do it again" written should give you a reasonable approximation of the desired result.

  Judging by your last two questions, it seems that you could do to get a copy of the core Oracle - the things you ask is pretty well coveredin manuals, but Oracle base is trying to present the mechanisms in a narrative form more that some people find it easier to assimilate.

  Concerning
  Jonathan Lewis

  Published by: Jonathan Lewis on 11 March 2013 02:35

• Cancel the changes on the edit form

  Hello
  
  Using Jdeveloper 11.1.1.2.1.0.
  
  We have a requirement to cancel the changes to the line in an edit form and do not leave the form.
  
  I've referenced the following items to arrive at a solution, [http://andrejusb.blogspot.com/2012/05/refreshing-single-row-without-full.html] & [http://www.oracle.com/technetwork/developer-tools/adf/learnmore/06-cancelform-java-169125.pdf].
  
  My implementation is;
  
  1 created a custom method on the class VOImpl that gets the current line of the VO and executes a refresh on the line.
  2. presentation of the method to the ViewController.
  3. added the method to the BTF.
  4 wired upward a command button to call the custom method.
  5. partial relaxation for the component panelformlayout for the reference command button was added.
  
  My question is;
  1. If the control button is immediate = true the RPP does not work. Once I have updated the browser manually (f5), the changes are rolled back as expected.
  2. If the control button is immediate = false;
  2.1 if I edit a required field, then the validation fails (as expected).
  2.1 if I change any field and not lack of validation, then PPR working properly and that the browser does not need to be manually (f5) updated.
  
  Has anyone had this same use case and where applicable;
  
  1. have you met the same behavior?
  2. How do solve you?
  
  Concerning
  
  Leon.

  Read this:
  http://www.SlideShare.NET/stevendavelaar/18-invaluable-lessons-about-adfjsf-interaction#btnPrevious
  It comes to life cycles, and it uses examples to explain. Very useful and interesting presentation that can help you to solve your problem.