Required privileges for the RMAN backup

Similar Questions

• Restore the RMAN backup on another server

  Hello

  ENV: Oracle 10 g 2 64 bit, RHEL 5.8 64 bit on ASM, Database size = ~ 1.3 to

  Backup RMAN of PROD will FRA and then backed up to tape. I have limited access to the PROD because it is maintained by 3rd party.

  My client is planning to move this database on their own datacenter (from the 3rd party data center). For test purposes, I asked DBA of 3rd party to provide us with an export of drawings required data pump. Export takes about 8 hours, and the import takes the same time to the new location. To copy the files exported to new locations takes another few hours (over the network). The total size of the dump file is around 500 GB. Thus, a whole cycle of Export-Import-copy takes about ~ 20 + Hrs.

  I want to try another option to reduce the time required for the updating of the database of PROD and which is "use RMAN backup of PROD ' and restore it on the data center server. RMAN full backup takes ~ 4hrs PROD and the restoration should be at the same time (new server has better and faster HW, storage with a SSD). I found this thread very useful on the Oracle Forms on this topic:

  Restore backup RMAN on another server

  This thread contains very good example for a restoration of database on the file system.

  I have a bit of confusion because my database uses ASM. The default location of the backups in PROD is FRA (on ASM == > db_recovery_file_dest = + FRA ). If I understand correctly, the RMAN backup must be in the same place where he was on the PROD Server - i.e. the diskgroup FRA.

  If I get a copy of the part 3 RMAN backup, how would I copy on FRA?

  OR can / should I just change the init parameter "db_recovery_file_dest" on the new server to point to the file system directory where the backup (say "/ ora_backup") and RMAN will pick up and restore the database?

  Please advise!

  Best regards

  You can restore the backup files to any location, then you must configure the channel using the "CONFIGURE CHANNEL device type disk format 'new location ';

  This thread will help

  Restore from a different location from the original location of RMAN backup

• Makes 32-bit is better for the battery backup?

  Original title: I got windows 7 32-bit professional to give above 4 hrs battery backup. And now I have installed the 64-bit but backup is about 3 hours. Makes 32-bit is better for the battery backup?

  Don't really know why it happened then... Should I switch to 32 bit? What is the best?

  There should be no significant difference in energy between 32-bit and 64-bit, you will need to check your settings of power and performance.

  As for which is better, it depends on two basic points. 1 do you really use all that needs or benefits of 64 bit, not a lot of programs don't. Second, how much memory is installed. 32 bit is limited to 4 GB native but about 3.2 GB of technical limit. However, 64-bit requires more memory base so in fact will help only if you have more than 4 GB

• You have enough privileges for the operation. Please contact your system administrator.

  Hello

  We are modernizing 12.1.3 to 12.2.4

  We have a custom workflow that sends the Notification.

  Notification consist of link (a link that directs to the custom function)

  By clicking on this link, we get

  Error:
  

  You have enough privileges for the operation. Please contact your system administrator.

  Actions taken:

  Active: WF_LOCAL_USER_ROLES, WF_LOCAL_ROLES, WF_USER_ROLES, user who receives Notification required roles.

  Checked: Function that is called by clicking on the link is affected under which the user is responsible.

  12.2.4 there everything must be given more subsidies?

  Please advice what to do to fix this problem.

  Hi AJ,.

  We have the solution to this question in my other thread, thank you for your support

  Call the Notification Destination URI

• Pull on the RMAN backup archive logs?

  Environment:

  Oracle 11.2.0.3 EE on Solaris

  Physical standby

  I have a gap of journal archive at the moment.  The missing archive logs have been saved on the primary and have not yet been transferred to waiting due to some maintenance work performed on the standby server.

  The database will be able to recognize that the missing archivelog files are in the RMAN backup files, restore them and send them to the update server standby for application?

  If not, will it restore manually, copy them to the standby server and save them for their application?

  Thanks a lot for your help!

  -gary

  Were the archivelogs deleted on the primary once they have been saved? If they have been deleted on the primary, then you can:

  1 manually transfer the backup to forward files

  2 replace the archivelog destination configured on the eve

  3 restart the managed recovery on the standby process, and the computer should be able to detect and apply the missing archivelogs.

  If they have not been deleted on the primary and are always available in the archivelog directory configured, then the process of Data Guard should be able to detect and automatically fix the gap.

  If you have a long interval archivelogs missing and you use + ASM, you can also try to use an incremental backup to roll forward the database pending, this article provides a good step by step: the steps for Rolling forward a standby database using RMAN incremental backup. (Doc ID 836986.1)

  Kind regards
  Oscar

• make it work how I want that he the rman backup-shared-disk fix - up

  Network of Oracle greetings!
  (Oracle 10g enterprise edition on windows server 2003 platform)
  
  http://www.DBA-Oracle.com/t_os_error_os5_access_denied.htm
  
  is a link where a fix on the location of the rman backups is suggested. It asks me to change logon oracleservicesid. my database is what runs a Web site. When I change the connection oracleservicesid the Web site is no longer functions.this is not desirable.
  How can I fix it?
  Even on my test server that hosts the databases, change the opening of session oracleservicesid to administrator, disable all connections made to the database on the local network using SQL developer. How to not let that happen?
  
  Help, please
  Thanks in advance
  cordially 946207
  
  Edited by: 946207 July 14, 2012 03:01

  10g is desupported for a long time.
  Your question is you backup to a network drive.
  The solution provided by Donald Burleson is correct.
  Why the site no longer works is not clear that you provide no error message, or whatever.
  Course, a simple solution would be to buy an extra drive to connect directly to the server.
  Your post is poorly understood why you plan to implement that.
  Also, your statement on the test server is far too vague. You did not yet provide no error message.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• Purge the rman backup

  Hello, since the alert.log file find this error:
  
  Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc3_25352.trc file:
  ORA-19809: limit exceeded for file recovery
  ORA-19804: cannot retrieve 12582912 bytes limit 59055800320 disk space
  ARC3: 19809 creation error archive log file ' DATA01'+.
  Sea 25 09:51:58 Jan 2012
  Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc0_25306.trc file:
  ORA-19815: WARNING: 59055800320 bytes db_recovery_file_dest_size is 100.00% used and has 0 bytes remaining available.
  ************************************************************************
  You have choice to free up space in the recovery area:
  + 1. Consider changing the RMAN RETENTION POLICY. If you are using Data Guard +.
  then consider changing POLICY of DELETE ARCHIVELOG RMAN.
  + 2. Back up files on a tertiary device such as a tape using RMAN.
  SAFEGUARDING RECOVERY AREA command.
  + 3. Add disk space and increase the db_recovery_file_dest_size setting to +.
  reflect the new space.
  + 4. Delete unnecessary files by using the RMAN DELETE command. If operation +.
  the system control has been used to remove the files, and then use the RMAN DUPLICATION and
  Commands DELETE has EXPIRED.
  ************************************************************************
  Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc0_25306.trc file:
  ORA-19809: limit exceeded for file recovery
  ORA-19804: cannot retrieve 12582912 bytes limit 59055800320 disk space
  ARC0: error creating 19809 archive log file ' DATA01'+.
  
  So I'm trying to purge the rman backup, but I have an error message:
  
  
  rman target = oratest@oraprdlnx1:~$ /+.
  Recovery Manager: release 11.2.0.1.0 - Production on sea Jan 25 09:47:30 2012
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  connected to target database: TEST (DBID = 2044700519)
  
  + RMAN > show all; +.
  
  using the control file of the target instead of recovery catalog database
  RMAN settings for database with db_unique_name TEST are:
  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/oratest/product/11.2.0/dbhome_1/dbs/snapcf_TEST1.f'; # by default
  
  + RMAN > allocate channel for maintenance of type; disc +.
  
  allocated channel: ORA_MAINT_DISK_1
  channel ORA_MAINT_DISK_1: SID = 237 instance = type of TEST1 = DISK
  
  + RMAN > crosscheck backup; +.
  
  "" element of verified backup: turned out to be "AVAILABLE"
  backup handle piece = RECID = 68 = 758320264 STAMP DATA01/test/autobackup/2011_08_04/s_758320263.794.758320265 +.
  Cut objects 1
  
  RMAN > delete obsolete; ** +
  
  RMAN retention policy apply to the order
  RMAN retention policy is set to 1 redundancy
  Remove the following obsolete backups and copies:
  Making key time filename/handle type
  -------------------- ------ ------------------ --------------------
  Backup Set 25 July 4, 11
  Backup total 25 4 July 11 1omgk64v_1_1
  Backup Set 26 July 4, 11
  Backup total 26 July 4, 11 1pmgk650_1_1
  Backup Set 24 July 4, 11
  Total backup, 24 4 July 11 1qmgk650_1_1
  Backup Set 21 July 4, 11
  Backup total 21 4 July 11 1rmgk650_1_1
  Backup Set 28 July 4, 11
  28 1vmgk69v_1_1 July 4, 11 total backup
  Save game 29 July 4, 11
  Backup total 29 July 4, 11 20mgk6a0_1_1
  Backup Set 30 July 4, 11
  Backup total 30 4 July 11 21mgk6a0_1_1
  Save game 31 July 4, 11
  Backup total 31 July 4, 11 22mgk6a0_1_1
  Backup Set 34 4 July 11
  Backup total 34 4 July 11 c-2044700519-20110704-07
  Backup Set 35 July 4, 11
  Total backup, 35 26mgk8ib_1_1 4 July 11
  Backup Set 36 4 July 11
  Backup total 36 4 July 11 c-2044700519-20110704-08
  Backup Set 41 4 July 11
  Backup total 41 4 July 11 28mgk94i_1_1
  Backup Set 42 4 July 11
  Backup total 42 4 July 11 29mgk94j_1_1
  Backup Set 37 July 4, 11
  Backup total 37 4 July 11 2amgk94j_1_1
  Backup Set 40 July 4, 11
  Backup total 40 July 4, 11 2bmgk94j_1_1
  Backup Set 38 July 4, 11
  Backup total 38 4 July 11 2cmgk95c_1_1
  Backup Set 39 July 4, 11
  Backup total 39 4 July 11 2dmgk95k_1_1
  Backup Set 43 July 4, 11
  Backup total 43 July 4, 11 c-2044700519-20110704-09
  Backup Set 46 4 July 11
  Backup total 46 4 July 11 2fmgk99f_1_1
  Backup Set 47 July 4, 11
  Backup total 47 4 July 11 2gmgk99g_1_1
  Backup Set 44 4 July 11
  Backup total 44 4 July 11 2hmgk99g_1_1
  Backup Set 48 4 July 11
  Backup total 48 4 July 11 2imgk99g_1_1
  Backup Set 45 4 July 11
  Backup total 45 4 July 11 2jmgk9a9_1_1
  Backup Set 50 4 July 11
  Backup total 50 4 July 11 2kmgk9aq_1_1
  Backup Set 49 July 4, 11
  Backup total 49 4 July 11 2lmgk9aq_1_1
  Backup Set 51 4 July 11
  51 4 July total backup has 11 c-2044700519-20110704-0
  Backup Set 56 4 July 11
  Total backup 56 2rmgk9qb_1_1 July 4, 11
  Backup Set 55 July 4, 11
  Backup total 55 4 July 11 2smgk9qb_1_1
  Backup Set 58 4 July 11
  Backup total 58 4 July 11 b c-2044700519-20110704-0
  Backup Set 60 4 July 11
  Total backup 60 2umgk9tb_1_1 July 4, 11
  Backup Set 61 4 July 11
  Backup total 61 4 July 11 2vmgk9tc_1_1
  Backs up the entire 62 4 July 11
  Backup total 62 4 July 11 30mgk9tc_1_1
  Backup Set 66 4 July 11
  Backup total 66 4 July 11 34mgk9ua_1_1
  Backs up the entire 65 4 July 11
  Backup total 65 4 July 11 35mgk9ua_1_1
  Backup Set 67 4 July 11
  Total backup, July 4, 11 c-2044700519-20110704-0 67C
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the delete command to the 25/01/2012 09:48:42
  RMAN-06091: any string allocated for maintenance (of a suitable type)
  
  How can I purge the db dest file recovery?
  
  Thank you!!!

  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the delete command to the 25/01/2012 09:48:42
  RMAN-06091: any string allocated for maintenance (of a suitable type)

  There is a metalink note that talks about this error.

  Met RMAN-03002 and RMAN-06091 when deleting obsolete backups [567555.1 ID]
  RMAN could not remove obsolete in right Backupsets change Sbt_tape to disk and again Server [ID 1287755.1]

  HTH

  Kind regards
  Nagendra Chillale

  Published by: NC on January 25, 2012 17:00

• Restore the RMAN backup to another database server

  Hello
  I create the instance TEST for my database of Production (PROD). I have a model base (MODEL) that is running on a different host.
  
  I can restore the RMAN backup taken on the PROD database to the MODEL database.
  
  
  Thanks in advance
  Amith

  Amith r wrote:
  Hello
  I create the instance TEST for my database of Production (PROD). I have a model base (MODEL) that is running on a different host.

  I can restore the RMAN backup taken on the PROD database to the MODEL database.

  Thanks in advance
  Amith

  Tychos said, why not use command DUPLICATE RMAN DATABASE to create the clone of the database?

  Anyway, you can easily restore the database on the new host using the steps mentioned in this link:
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814

• You don't have enough privileges for the configuration of the connection properties. Contact your administrator

  When you attempt to connect to the VPN Aventail I get th e following in a "Connection error" message box: "you don't have enough privileges for the configuration of the connection properties. Contact your administrator. That this connection has worked before. I suspect a MS patch for breaking it. Any help would be appreciated.

  We have solved the problem yesterday, by simply reinstalling the Aventail software.

  I spoke to network administrators and nothing had changed, so it's quite strange.

  anyway thanks a lot for your help Brian.

  See you soon,.

  Tobias

• Download videos from Sony Handycam; error: do not import because you don't have access privileges for the file to import

  Original title: Downloadinf videos from Sony Handycam

  I have sony handycam HDR-XR550V.   When I tried to down load my videos and pictures of the handycak for PC Windows 7 I get the following message appears after download some of the pictures "may not matter because you don't have access privileges for the folder to import to. well.»  Help, please

  I have sony handycam HDR-XR550V.   When I tried to down load my videos and pictures of the handycak for PC Windows 7 I get the following message appears after download some of the pictures "may not matter because you don't have access privileges for the folder to import to. well.»  Help, please

  It is probably a permissions problem.

  Appropriating a file or a folder
  Add 'Ownership' in the context Menu for files, folders, and drives

• DVD how much we need for the files backup with backup and restore program?

  Hello how are you?
  DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?

  I do not understand your question.  Asked how the space has been used on your C: drive and you answered 60 GB.  Now you say your PARTITION C: is 60 GB with only 20 GB used?  I really don't understand what you're so confused.  It's simple arithmetic grade 3rd.  What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression.  Divide this number by 4.7 and round.  That's how many DVDs you'll need if you insist on the use of DVDs for backup.  Then

  (1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936.  I rounded up to 9 and added 1 just to be sure.

  (2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3.  Add 1 and get 4.

  If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.

  All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended.  When I used the windows one, the results were several times the space that I used on my C: partition.

  Good luck.

• The OFA error: you have enough privileges for the operation. Please contact your system administrator. (Hello world does not)

  Hello

  My business that we are upgrading to R12.2.5. I downloaded the latest patch from metalink jdeveloper and trying to configure jdeveloper. When I ran Hello World program I get an error of "you have enough privileges for the operation." "Please contact your system administrator."

  I have facility for all the configs needed in the project but still is the same.

  
  When I fell on the debug mode. I got the same error with the missing config file.

  Please check below the debug message:

  November 4, 2015 16:47 oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig

  INFO: oracle.adf.share.config.ADFConfigFactory no META-INF/adf - config.xml not found

  Help me its urgent.

  Thank you

  Thanks for the reply to my post.

  I used the position and he help me solve the problem.

  As I'm working on R12.2.5 which is the latest version of oracle, so the solution was not entirely correct, but helped me dig the real solution.

  After that the implementation of Jdevloper below is the steps I followed

  1. change the profile FND option: validate IP address - no

  2 al ' Jdeveloper go to tools--> embedded OC4J preferences--> Global--> starting--> address local IP select by default.

  It helped me solve my problem.

  Thank you

• We have created a responsibility custom to access the Collection of quality RESP results, we get an error - you have enough privileges for the operation. Please contact your system administrator.

  Hi all

  We have created a responsibility custom to access the results of Collections only HTML page.

  Details of the liability and the Menu are also less

  Name of the RESP: XX QUALITY

  Application: Quality custom

  Menu: XXQA_QUALITY

  and there is no attached grp applications.

  Definition of menu:

  Menu name: XXQA_QUALITY

  Description of function for the submenu SEQ invites

  10 quality Workbench results results collection begins Page quality Workbench results Start Page

  quality of view finds quality results 20 results display quality results

  We show only this specific user responsibility and whenever it tries to access the page "Results from the Collection" he gives us an error.

  "You have enough privileges for the operation." Please contact your system administrator.

  
  

  If we attribute an RESP of super user of quality to this user, it allows to access the form.

  
  

  Can you kindly help us to find a solution to this problem.

  
  

  Thank you

  Maury
  

  Hi all

  I guess I found the answer,

  I need to join all the submenus that are part of the HTML Page.

  Results from the collection			Results of quality Workbench Start Page
  Nonconformities			Quality Workbench nonconformities homepage
  Corrective actions			Quality Workbench action homepage
  Consultation of lots of Skip			Lot of Skip quality Workbench Start Page

  Have they added those. and it worked.

  Thank you

  Maury

• Error running OAF in R12.2.3 page: you have enough privileges for the operation. Please contact your system administrator.

  Team,

  EBiz Version is: R12.2.3

  OFA Patch Jdev Version is: p17888411_R12_GENERIC

  IAM getting the following error: you have enough privileges for the operation. Please contact your system administrator.

  during the execution of the page of Jdeveloper.

  Let me know what is the bug in this?  What I need to change no matter what profile? It occurs because of a security problem?

  Please advice.

  Concerning

  Sridhar

  It is resolved...

  do you have the same things that are mentioned in

  ORACLE APPS: Errors and resolution OFA

  Go to tools--> embedded OC4J preferences--> Global--> Select Start--> default local IP address. @

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning