Required Windows Vista programs

Similar Questions

• are games that say "requires windows vista. works on windows 7

  are games that say "requires windows vista. works on windows 7

  Hello

  almost all do, and some need a patch from the creators, check out these sites for more information

  http://www.Microsoft.com/Windows/Windows-7/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/products/home?OS=nonwin7

  and if you have a specific problem or Q to a certain game, simply ask and post, almost every problem has a solution!

  Good day

• All of my Windows Vista programs appear under the same icon.

  Problem with Vista programs: all of my Windows Vista programs make their appearance as the same icon.  How can I fix it and what happened?

  Rebuild the cache icon as follows: http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.  That should take care of the problem.  I don't know why it happened - but I've seen it before, and we never really determined the cause then either.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• for the required window vista product key

  I bought pavilion computer hp laptop dv 9601AU since 1997 in new delhi (India) with Windows vista 32-bit operating system was under construction. But right now I am facing a problem laptop required window vista real key... in the cases where what I do... ? Please help me my email ID is [email protected] and my address is-A-44, Vaibhav Surendra Palace, Bhopal-462026, contact mobile no.-09893748682

  Your Vista license key is attached at the bottom of the laptop.

• I am trying to remove the read-only in a file of windows vista program

  Hello

  I'm having a problem with the program files in Windows Vista. I have a file that I need to be able to write to and I can't get out of the read-only mode. Can someone help me with this please?

  Thank you.

  You really shouldn't be messing around in the Program Files folder unless you REALLY know what you are doing, because the wrong action can cause a lot of damage to your programs (more than one in some cases).  You experience trouble intentionally caused by Vista.

  But assuming you want to do anyway for some reason, the said problem as a Teen geek is ownership and permissions.  They are particularly tight on the programs folder (and hard to get around even for people experienced in this sort of thing).

  You must you give full permissions and take ownership of the files or the folders that you intend to work with.  You may need to change the permissions of the parent due to inherited permissions folders.  You may also use the advanced permissions option to deal with special permissions (maybe change some while they are not inherited or others in order to provide the right permissions as well as the main permissions screen.  I don't know how long until you go to appropriating, but start with everything that you need and work upward only when necessary.  Here are a few guidelines for permissions and lines taken possession that should help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems in using a DOS Windows Vista program

  I hope someone can help me with this.  I currently have a HP Compaq Presario F700 computer laptop (GR967UA #ABA) which has a processor bicoeur AMD Athlon 64 X 2 (TK - 55 1.80 GHz).  I have 1.0 Gig of RAM, and it's a 32 bit OS.  I am running Windows Vista Home Premium, Service Pack 1.  My problem is the following:

  I installed a program of production/printing barcode Dynacomp, a MS-DOS program that told me the company is compatible with and would work on Windows Vista operating system.  I can get the program to operate in all directions except for actually photograph the barcode.  When I try to do, all I get is an error message indicating "device PRN of spelling error".  I checked the connections to printers, operation and have no problem printing with something else.

  I'm not a user of BACK and just the most basic familiarity with its use, for example. If there is no step by step instructions, I'm lost.  Any ideas on why printing is a problem or if all goes well a few ideas on fixing or working around the issue would be greatly appreciated.

  This is JUST A GUESS, but I assume that the program tries to write about the default printer... know LPT1, which is a device of parallel port... which YOU probably do not even!  This thread seems to discuss your problem: http://www.annoyances.org/exec/forum/winxp/t1018027328 (Google: BACK set default printer).  Technically, their program MAY work in Vista, command prompt, but maybe ONLY when the computer has a parallel port LPT1 printer is connected.  You need to talk to Dynacomp and ask them what to do to address setting up YOUR printer.  If you Google long enough, you'll probably find the answer yourself... There are VERY FEW problems, that no one else has not met before (you), and they are kind enough to document their journey

• updates Windows vista program

  I have ten windows vista update that will NOT update. Last update was on 21/03/2010, that this program is installed with the purchase of the laptop. Can someone help me with my problem please...

  Thank you

  I have ten windows vista update that will NOT update. Last update was on 21/03/2010, that this program is installed with the purchase of the laptop. Can someone help me with my problem please...

  Thank you

  Hey rudyz56

  You can try this

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  also try to put the KB numbers in looking at the above link and then download them manually

  http://www.Microsoft.com/downloads/en/default.aspx

  and here's the windows update link below forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads?filter=answered

  Walter, the time zone traveller

• I got this laptop from a friend today and the windows vista program must be a trial version. I have xp to install but I can not even a start even menu display. __

  I have windows xp to install on the pc, but the program windows vista here is a trial version and it is out of time. I can't even start to show even a menu. I try Ctrl-alt-del and it does nothing. Please help me I don't know what to do. I want to install windows xp on here and get rid of this vista trial.

  If you already have the Windows XP disc:

  • Insert the Windows XP disk into the CD/DVD drive
  • Completely turn off the power - the power supply light should be off, without blinking.
  • Turn on the computer and be careful. When it says «Press any key to boot from CD...» "Press a key on your keyboard, the Windows XP Setup program is now charging.

• not compatible with windows vista program

  Hello everyone, I have a problem with my computer. I have windows vista and everytime I turn it on it tells me that some running programs are not compatible with it and its Visual bases have been chaged... can someone help me with this please?

  Try to update Windows and install the latest service pack if you don't.

  Updated Visual Stadio too.

  Problem and solution center to check and see if there is any new solutions.

• Problem of Mode full screen with Base of BACK in Windows Vista program

  I have a program from base of BACK, but I can't go full-screen with my BACK Basic program. In order to solve my problem quickly.

  Here is a link to a similar problem with a number of proposed solutions: http://www.askageek.com/2007/12/20/how-to-run-an-old-dos-program-in-full-screen-using-windows-vista/.

  Here is another article to resolve the problem (and note the links to other sites that may also help) from Microsoft:http://support.microsoft.com/default.aspx?scid=kb; EN-US; 926657. I'm not sure I like the idea of using the XP drivers on the Vista system (it seems unfair), but the article comes from Microsoft if...

  Here's another option to run the BACK of the screen maximized in Vista with some possible solutions:http://www.walkernews.net/2007/06/03/how-to-maximize-vista-command-prompt-window/.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I just bought 6 Lightroom on DVD and it will not be installed. message says OS disappointed requirment, Windows Vista not supported. I have Windows 7, NOT in Vista. What is the problem?

  Just bought 6 of Lightroom and it don't be loading not - says OS requirement not met (whatever!) and Windows Vista supported nopt. I HAVE WINDOWS 7, VISTA NO. Add to my frustration, I can't just talk on the phone to ask a question, I have to go through any of this bubble.

  Try installing lightroom 6 on windows 7 get interface requirement not met windows vista not supported

• What the * happened to my Windows Vista program earlier this week? I don't know what I did and I had nothing else but BIG TROUBLE SENSE HELP!

  After sevice pk 2 I did nothing but chase problems, 10 pilots down in a single night. Now it starts only in safe mode byitself and system restore it impossible of access that has not helped the only time where he worked finally unable to access updates windows either. At Mr fix it to work on things for houirs, but now his party and I cannot get safe mode and its so limited after problems, I spent this week all treat them w/problems. I don't know what else to do and I don't know what tpo events cause this Nightmare.Iam now crazy and lost, help me!

  Hi Claudette Russell,.

  ·         What is the full error message?

  ·         What happens when you try to start in safe mode or normal mode?

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Perform a startup repair.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  Method 2: Restoration of system Windows Recovery (WinRE).

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3: Perform a check disk (Chkdsk).

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: When running Chkdsk on the drive if bad sectors are found on the disk hard when Chkdsk attempts to repair this area if all available on which data can be lost.

  Reference: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Why do some executable programs require Windows Vista user account control to start, while others do not?

  For example, Iobit Advanced System Care 6 requires user account control to start, while none of the programs Microsoft Office requires user account control to start, but they are all executables (*.exe).  Why?

  EXE files may have a small text file embedded in them that controls this behavior (and other). A file called programname.manifest in the same folder can do it too, but one stand-alone exe substitute manifests (vista and later).

  Here is one that requires the Admin run and also uses 6 worm of the common controls.

  
  
  <>
  version = "1.0.0.0".
  "" processorArchitecture = "*".
  name = "DFT".
  Type = "win32".
  />
  Unicode text editor
  
     
          <>
  Type = "win32".
  name = "Microsoft.Windows.Common - controls.
  version = "6.0.0.0.
  "" processorArchitecture = "*".
  publicKeyToken = "6595b64144ccf1df."
  "" Language = "*".
  />
     
  
  
     
         
              <>
  Level = "requireAdministrator".
  uiAccess = "false".
  />
         
     
  
  

• I can not install properly on my Windows Vista programs because something is wrong with my Installer. What should I do?

  The message (when installing itunes) States:

  There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.
  Now, everything was going well until I tried to install the latest version of itunes 2 days ago. Is there anything I should do? I'm just a bit confused (great)! I tried uninstalling and reinstalling itunes and others, and it doesn't seem to work.
  Any help is appreciated!

  Hello

  Unregister and re-register the Windows Installer service and check if the problem persists. I suggest that you follow the steps in this link and check if the problem persists.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-install-iTunes-error-there-is-a-problem/11f4e2c0-0595-4c7f-8579-e52d2c4bf36c

• When to reinstall Windows 7 Upgrade it will require Windows Vista to be reinstalled also?

  computers portable hard drive is dead, had to be replaced.   Right now, I'm trying to reinstall vista from a recovery disk (taking all the patches) and then use the disk upgrade of windows 7 to install windows 7.   I thought to try a custom Setup, but I have this feeling that the win7 will search for a previous version of windows.

  Thoughts or ideas.

  No need to repatch Vista, just reinstall then do the custom installation of Windows 7 Upgrade top and reactivate by phone if necessary:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us