requirements and configuration of the mobile module

Similar Questions

• I received a message on my email that my live hotmail is about to be eliminated, and information is required and click on the back with my information. True or phishing?

  I received a message on my email that my live hotmail is about to be eliminated, and information is required and click on the back with my information.  True or phishing?

  Hello

  This is a phishing scam.

  Don

• How can I turn off recognition of face and people in the library module

  How can I turn off recognition of face and people in the library module. I don't know how I turned it on

  Hi Stacy,

  Please click on your name in the upper left corner, and then Pause the face detection.

  Kind regards

  Tanuj

• All your existing data transfers for win8 win7? The same thing happens to the settings and configuration of the printer?

  Original title: fact of data transfers

  All your existing data transfer of win7 for win8 and do o all your settings and printer configurations do the same thing

  The upgrade to Windows 7 or later will preserve my personal files, applications, and settings?

  Yes, the upgrade to Windows 7 or a later version will preserve your personal files (documents, music, pictures, videos, downloads, Favorites, contacts, etc., applications (IE.) Microsoft Office, Adobe applications etc), games and settings (ie. passwords, dictionary, the application settings).

  My programs, equipment and existing drivers will work on Windows 8?

  Most of the applications and designed for Windows 7, hardware drivers or later should work with Windows 8. Of course, with significant changes expected in Windows 8, it is preferable to that contact the software developer and supplier of equipment for the support for Windows 8. Windows 8setup will be keep, update, replace, and may require that you install new drivers via Windows Update or the manufacturer's Web site.

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7.

  Also check:

  How to back up and restore your files manually

  To learn more.

  The upgrade from Windows 7 to Windows 8

  Please note that if you migrate to and not 8.0 Windows 8.1, you must perform a custom installation.

• Is there a process or program that I can use to restore the system and configuration of the system to the original

  Hello

  I would like to know if there is a microsoft tool or a suggested list of Microsoft that could help me restore the system and the system configuration files in the appropriate State. is not the restoration of the system. I don't know of retoring my computer to an earlier time, nor on the restoration of computer purchase. 

  I thought that my computer has been compromised in some way, and the intruder was accessing my unit via some sort of connection distance.

  I received the support of the malicious software company, and I think that my computer is fine now.

  And so the question with which I opened this post: I would like to know if there is a Microsoft tool or a suggested list of Microsoft that would help me to restore the system and the system configuration files in the appropriate State. I'm not taling about system restore. I speak not of retoring my computer to an earlier time.

  Whenever I start to notice the strange behaviour of my computer, I would like to launch this program and follow this procedure to reset all the settings and files to a suitable State. The reason why run alone to detect malware problems, and that if there is remote access to my computer inadvertently, the intruder can do a lot of editing of files which is not identified by the malware. and I believe that if I was able to run a program like this, all the changes took place, which expose my device, but the rules of behavior systems can be reversed for a proper state.

  I read an article on how to repair my operating system, but it forced me to get a copy of it; However, given that the supplied operating system with preinstalled on this computer, I could not follow the instructions. Article I read to all system and configuration files that meet the standards of the manufacturer, without losing files and installed programs.

  Thank you

  Hello

  Already, you mention that you can do; either a repair installation.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  And make sure that read you all the information under 'warning'.

  It also tells you what drives you can and cannot use to do.

  ________________________________________________

  You can use this to fix the corrupted system files.

  "Command SFC/scannow - System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  See you soon.

• Model of card mother T7500 and configuration of the controller RAID LSI 1068e

  Hi, I just bought a T7500 workstation I would get around mid-December. Because of current prices for HARD drive storage, I decided to go with the 500 GB basic disk up to HEALING of Thailand. Thus, I am limited to basic integrated RAID controller. Because I am not familiar with the RAID configuration, etc. I wanted to read more before I dive in. The starting point would definitely find what was right for the Precision T7500 motherboard. Surprise! I can't find information anywhere. Even Dell people (3 different sales and support representatives) have not managed to tell me it's the Intel 5520 chipset (it looks that they believe that it is the motherboard model...). Well, I'm stuck. I would appreciate if someone could provide me with the model of motherboard and Special Edition, all information on the capabilities of the controller integrated RAID (LSI 1068e) would help me determine what drives should I plan to buy. In addition, one thing that is not clear to me what I inferred from the configuration on the website Wizard is the issue around disks > 2 TB. Of after I read it, I was not able to determine whether the problem was related to the simple readers > 2 TB or if it was related to the management of a storage space > 2 TB (which could be composed of several readers less than 2 TB). What I have in mind (remember that I do not have the machine right now) is to 4 X 1 TB drives in a RAID 0 + 1 (which I'm not sure that the integrated controller supports) configuration that will result in the storage of 2 GB mirrored. The operating system is Win 7 64 bit. Thanks in advance for any info that will help me to prepare my setup (buy hard drives, if I can find cheap ones) and find information on the configuration of the RAID. MrBricole

  I'm sure the T7500 uses an Intel Server Board (since this chipset is located on the Intel site under its motherboards, Dell is essentially correct, even if they didn't know why), but it doesn't matter in the context of your question, because the '' integrated '' RAID controller is not actually on the Board.  It's a card (called "integrated" only because it has a slot on this machine).  Because the functionality of the RAID controller is not on the Board of Directors, Board info will not help you.  Everything you need to know about your Council and the entire system, you can get the T7500 manual.  SAS 6/iR (LSI 1068e) RAID controller information can be found here:

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  The SAS 6/iR will not support more than 2 TB of drives, or it will support more than 2 TB of virtual disks.

  It will also only supports RAID 0 OR RAID 1 OR both, but not together (not levels no RAID nested as RAID 10 or 0 + 1).

  So with four 1 TB drives, you can easily do two RAID 1 (called integrated mirror in the controller BIOS CTRL-C)... or you can do two 2-drive RAID 0 (Stripe called integrated in the controller BIOS CTRL-C)... or you can run mode non-RAID, with four individual discs in the operating system.  With this controller, those are your only options with four 1 TB drives.

  If you want / need more features RAID (nested RAID, 2 TB of the VFD above, on board levels, cache, etc.), you must upgrade to the PERC 6 / i.

  Do not buy office records class... Make sure you get enterprise-class drives.  If you decide at some point to go with PERC, not only enterprise class disks will be fundamentally necessary, but certified records would be strongly recommended for stability and performance.

• Msieih32.dll startup problem and said that the specified module could not be found

  Original title: msiei32

  problem with windows 7 home ed, when I start my windows the messege appears on the screen that says (there was a problem starting msieih32.dll and said the (the specified module is not found.)) I tried to copy this file system from another operating system 7, but can't find it help please

  Duplicate the content of the Post-
  msieih32.dll
  Hello
  Having problems with msieih32.dll I start my windows (7), it pops up a message that says msieih32.dll missing please help file

  Hello

  msieih32.dll is an important part of this computer software and in the event that it is damaged and missing also you can get Microsoft windows computer warning error for example; "msieih32.dll not found"or "Microsoft Windows operating system was able to start because msieih32.dll was not found.

  Method 1:

  You can check the boot issue. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  You can follow the procedure.

  (a) click Start.

  (b) type CMD.

  (c) right click on cmd.exe and select run as administrator.

  (d) type the following command and press ENTER.

  Type regsvr32 msieih32.dll and press ENTER again.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss

  Method 4:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Work on 2 computers and synchronization with the mobile WARNING LR

  Hello

  I keep a copy of LR on a laptop and desktop, I keep my LR catalog and the library on an external drive. I also synchronize with LR Mobile. When I get out of my office, I get a message saying that x number of photos are always sync. I do not get this message on my laptop. Synchronization on my desktop does not start unless that delete all my data synchronization. It will be just me to get the same message on my laptop. So, I know why this is happening but I do not know how to solve. I would like to continue the synchronization via my laptop. Is there a way to tell LR on my desktop to ignore the mobile synchronization.

  If the solution is to load LR from my external hard drive, which causes a problem with creative cloud and update software? I also have Photoshop on both computers.

  Thank you.

  Try hovering over the plate on the desktop and click the menu drop down. In Control Panel, you can pause sync from your desktop.

• Lightroom CC that I don't have a printer configuration in the Lightroom Module?

  I don't have the option print settings on the bottom of the left side of the print Module! Where is he? I use Ligtroom CC and Windows 7.

  Hi shirleyv,

  The Option for print settings is only for MAC computers, no windows.

  If you click on print... to open the settings of the printer and select it.

  Let me know if it helps.

  Kind regards

  Tanuj

• Can I download the web version first and then download the mobile version is over? How this is done?

  I have a site loaded and works very well. I want to do a mobile and tablet version. Can I build the mobile and tablet version OFFLINE and without having to download until it is ready? I lost many of the visitors and customers because the download was done with incomplete mobile and Tablet versions of the site.

  Thank you.

  Hello

  Please check this thread with the similar discussion

  Export only the desktop version of the site, mobile version not

• Receive error message on installation and configuration of the laboratory of Automation Center IaaS component vCloud

  

  You install the .net on the correct server? Because printing, I assume this is a Windows Server 2003, and according to the following link, .net Framework 4.5 is not supported by Windows Server 2003: .NET Framework system requirements

• How can I search for and work in the card module without losing my selection

  I'm going through my old photographs which predate the geolocation and adding my best guess as to their sites via the card module, but I'm frustrated.

  My biggest fear is selections.  In the library module, I look at and find a set of photographs that were taken at the same place and I select them.  I then go to the card module and move found, sometimes look, the place where the photographs were taken.  Now I'll return to drop the selection in the map and... OH NO.... There is no selection.  Double angst is I click back in the library and I scrolled to the beginning of my group of photographs.

  Deselect photos is the biggest mistake of the UI that Lightroom is making in this sequence.  I wonder if there is something I can do to avoid it being may have a second method of a quick temporary group of photographs.

  The other related question I have, is if someone has a suggestion of how to mark these photos as the type of GPS data.  for example, it could come from the camera, it could come through a trace log, or maybe it's just my best guess.  Maybe it is already possible to determine.

  When you find the photos you want to taken in one place, select them, then put them in a quick Collection (press B)

  Select the quick Collection, then go to the card with the film Module running. You will then be able to work ONLY with this series of photos that are taken in the same place

• default values for sharpness and noise in the develop Module

  Capture sharpening

  I get my head round sharpening and agree there are three distinct phases: Capture, creative and output sharpening sharpening sharpening

  Regarding the Capture sharpening, I noticed that when I import a CR2 file in Lightroom 3.6 there is a pre-set Adobe in the develop Module. Is this a form of Capture sharpening default?

  Sharpening

  Amount: 25

  RADIUS: 1.0

  Detail: 25

  Noise reduction

  Luminance: 0

  Color: 25

  Detail: 50

  Thanks, Jeff

  I got the hang of this now. The parameters are the same in ACR and LR - as I might expect that I always use the same camera - but they never vary independently of any setting ISO I can used well

  Bill

• Installation and configuration of the EMP 11.1.2 planning

  Hi Experts,
  
  I installed the script:
  
  Distributed - environment
  
  Components of hyperion server 1-install on drive C
  Hyperion Server 2-installs on the C drive components
  Hyperion Server 3 installed on the D drive components
  
  
  Is it OK if I configure on the drive C or D.
  
  Is it mandatory to have the installation/config on the same directory.
  
  
  Concerning
  Kumar
  
  Published by: Kumar 1 September 23, 2011 05:39
  
  Published by: Kumar 1 September 23, 2011 05:42

  As the documentation that States the same directories.
  I have not changed the base directory in 11.1.2 there are a number of environment variables and registry settings pointing to directories, but I advise to change.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What exactly are the unscaledWidth and unscaledHeight in the mobile element converters?

  Hello

  What are exactly the unscaledWidth and unscaledHeight which are passed to the method Measure [] for a mobile element converter?

  I guess converters start at "default" width and height (so without scales) which is reduced based on the DPI. Isn't it?

  Thank you.

  It is roughly the same as the updateDisplayList method.

  The process to measure and set the minimum limits (measuredWidth and measuredHeight) in the Measure [] function, then in the layoutContents method that you will be spending the actual values (preferred), because it is located in the page layout. Usually, that's what you define as measured limit, but sometimes it can be different, as if the content should be reduced or enlarged to fit a parent container.