Rescue and Recovery to WIN 7 - T510

Similar Questions

• R60 always boots in Rescue and Recovery in Win XP

  Hi all

  I was intending to write a backup via Thinkvantage R & R, started from the start menu. As no target could be selected to save the backup fails.

  After that I talked to one of my colleagues, who told me to use R & R by the window (this way he did the first backup), I reboot the machine via the restart button in the upper right. The rebootet of the machine, but rather to start Windows Thinkvantage R & R was launched again. No matter what I do, if I chose to boot from the disk HARD Thinkvantage R & R starts (if I chose to boot from USB od CD system on key or CD will start).

  I can repeat to infinity, it will always start Thinkvantage R & a. I even tried to go back to the initial backup - without outcome

  Maybe someone can tell me how to stop this circle.

  Thank you in advance.

  Dennis

  Hello

  Sorry for this late reply, but I did not test this earlier.

  Thanks for the tip, this is the first step to solve this problem. After I changed the boot flag, I could start XP - but only once. So once again, I changed the boot flag and I saw a notice about a failure and now waiting for the backup operation (this time, I watched the XP boot process, closer .) After that I gave up work on hold, I am now able to boot into XP and R & R as I want.

  Thank you all for your help.

  Dennis

• Use 'restore factory of Rescue and Recovery' to upgrade 32-bit to 64-bit windows 7

  I have 6 GB of ram on my Lenovo SL410. It runs win 7 32-bit.
  Windows shows that it is capable of 64-bit.
  Can I use "restore factory Rescue and Recovery" to perform the installation of win 7 64 bit?

  Thank you

  Your recovery DVDs are listed here:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-SL-series-laptops/ThinkPad-SL...

  I guess if your recovery partition factory is win 7, 32 bit, it will restore win 7, 32 bit.

  You can order the win7 64 bit DVD for about $50 US recovery.

• Failed to uninstall Rescue and Recovery version 4.3

  Hello

  I'm trying to install Windows 10 on my Lenovo T510 laptop running System 7.  The Setup program indicates that the software Lenovo Rescue and recovery 4.3 as not compatible with Windows 10.  Accordingly, I am prompted to uninstall this program.

  When you try to uninstall this program, I get the error message.  Error 1316.  The specified account already exists.

  That - what it means and how do I remove it so I can complete uninstallation of the software?

  Thank you

  T

  I have updated the Rescue and Recovery program to the latest version.  She made an attempt to "update" of the old version, but in the end, I got two installed versions.  That said, I was then able to "Uninstall" the old version 4.3.

  Shortly after I had a transparent update for MS Windows 10.  Everything is good on this end and my machine is running wonderfully well with the new OS...

  Thanks for the tip...

  TT

• Rescue and recovery X 1 Win10PRO carbon

  Just got a X carbon 1 and modernized to win 10

  1)

  Wanted to use the system to make a picture, but I got

  ERROR: "there was a failure while compacting the virtual disk on the backup location. (0 x 80780151)

  Googled around, bu tno solution.

  Anyone know when it will be solved?

  2)

  And another problem. I am IBM and Lenovo user for several years, and the best backup system I've ever used is the rescue and recovery. After getting my new X 1 carbon with 8.1 Pro I upgraded to 10 Pro and if you come for the Lenovo of installation I clicked for works RandR 4.52, which proved in the software Lenovo, but unfortunately it download, unpack and then stops. Without any news. So I started the Setup file myslef, and... my God... it can not be installed!

  I'm angry.

  Why Lenovo not tell us this? And if she came, when is it ready?

  Lenovo Solution Center, if you use win8 or win 10, should offer NOT RNR as a backup option.

  If would be nice if they removed the advertising, "it takes a HDD to take backup more," store here.

  To win 10, I would like to start off the coast with a windows image backup.  Apparently, windows launched LSC backup, and you got the return code that you noted in the initial post. Backup Windows runs fast, but it lacks many features of RNR.

  I would like to run windows backup from the Control Panel, which you have done already. Some of the windows backup return codes and error messages, can be deceiving.  Check the EVENT VIEWER after windows backup error, to see if other return codes are present.

  Example: "you do have not enough free space on the device target to perform a backup' RC = 0 x 00000.

  Further, the question was NOT enough free space in the lecteur_systeme windows backup staging a zone index for vs.

  I would check the available in System_drive freespace.  This can be a hidden partition.  You need at least 200 MB freespace.

  A google search of the return code that State you have many successes.  I have try the backup, check the event viewer for VSS fail return code, which is passed back to backup windows.  If you have a VSS error, I would google search on the return code from VSS, windows backup not the return code.

• Delete backup files Rescue and Recovery after the uninstallation of r ' not R

  During the upgrade to Windows 10, Rescue and Recovery has been automatically uninstalled.  I had neglected to remove the external drive backup files before that.  I would like to locate these files so I can delete them manually.  What files are backups Rescue and Recovery?

  Y at - it a compatible version of Windows 10 Rescue and Recovery?

  I leave your external USB - HDD intact right now.

  You might like to win 10, win10 could not meet your needs and turn.

  A Loved via RNR win7 would be nice to have, just in case.

  If it comes to the test computer, your decision.

• Error 25014 trying to install Lenovo Thinkvantage Rescue and Recovery! Help, please!

  Hello! Recently, I have restored my laptop with a general copy of Windows 7 pro 64-bit. I had to redo all the drivers and software (of course). I had installed Rescue and Recovery before but never used. I tried to reinstall it today and he throws back each time with the same error message (error code 25014 = 6)! I had installed linux but deleted and installed Windows again. I also have a 21 not used same GB partition (I have no idea how to combine). Any advice on how to work will appreciate it! Thanks for your help in advance!

  RC 25014 = 6 error is error install boot RNR Manager.

  Provide information:

  (1) your machine ship of Lenovo, with Lenovo factory system? If Yes, what operating system has been installed? Vista, windows 7 home, pro etc? This would install with 3 partitions: system_drv, Lenovo recovery, (C).

  (2) you say: I recently restored my laptop with a general copy of Windows 7 pro 64-bit

  Not that this means that you do not have a Lenovo factory restore, but actually installed a commercial version of win7 pro?

  I'll assume win7 pro retail for now.

  (3) you say: I had installed Rescue and Recovery before but never used.

  It was in the past, lets say on a shipped factory system Lenovo?

  (4) you declare: had installed linux but deleted and installed Windows again. I also have a not used 21 same GB partition

  ===

  It seems to me, your HARD drive had a top system.  I see Ubuntu mentioned in your other posts. Your HARD drive had several parttions, including the 21 GB partition. Then, you have decided to install a retail version of windows 7 pro.

  During a sale at retail of windows installation, you must pay attention as to where it will install.

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Note steps 7 and 8.

  It seems that you did the windows installation disk HARD existing, with the pre-existing partitions.

  ===

  RC = 6

  The simple answer is THAT NRR is already installed.  Did you uninstall RNR before installation?

  The answer is complex:

  During the installation of RBR went to add its boot manager entries, BCD (startup control data), he did NOT like the content of the BCD, IE other entries parked in the BCD, ie, Linux. He expects to have 2 slots used in BCD, windows, and windows RE.

  ===

  Reflect this. See if it fits your situation.

  ==

  I would erase the HARD disk via a standalone utility, then install win 7 pro retail and all issues should dissipate.

  This erase/delete can be done during the installation of windows.  refer to steps 7 and 8 above.

• Rescue and recovery and windows 8.1

  Hello

  For the last 4 years, I used Rescue and Recovery on the my ThinkPad to keep backups (really liked the functionality of incremental backup) and restore unique when files necessary.

  I have now just received a new X 1 carbon gen3 coming with default Windows 8.1 and a lot of the classic ThinkVantage tools are missing. I've heard many of these tools no longer exist or are replaced by "apps".

  But what of Rescue and Recovery? Impossible to find anywhere for Windows 8.1 and it is really a great tool.

  Any idea? I just missed the link somewhere? It's official, and it tools is not taken in charge (and will never) on Windows 8.1? No work around? (such as installation of Windows 7 and cross my fingers?)

  Thanks for your comments on that (I'm already hating Windows 8.1, fortunately Windows 10 will be better...)

  Rescue and Recovery is not supported on 8 win 8.1 you can try using windows backup.

• How to cancel a Rescue and Recovery

  Hi, I have a Lenovo X 61 laptop. My hard drive has been divided into two partitions: operating system and data. Recently, I found that my Windows was no longer able to boot. I managed to install Windows 7 in OS partition. All my files in the second partition has been preserved. My laptop was working fine then. I realized later however that the Lenovo drivers are gone (for example: recognition, which was not necessary, but good to have fingerprints). So by digging the box where my laptop was packed, I found the CD "Rescure and recovery." So I plugged in and restarted, thinking that it will just install the drivers needed in return. But then not only if it deleted Windows 7 that I just reinstalled, but it destroyed the partitions and delete all my data in the second partition. Is there some way I can restore the configuration partition and all data I had? Thanks in advance.

  not at all, rescue and recovery media is for the recovery of the device in default, as it was delivered to the customer. It is impossible to restore this operation in a standard way, if you did, which confirmed the operation in the wizard of R & R.

• Question of rescue and recovery, and Client Security solution

  I have a thinkpad edge e220s for home use and I am trying to understand that these two thinkvantage tools will be of no use to me since I'm not on a corporate network or whatever it is (all marketing materials HE mentions admins etc.).

  Is the rescue and recovery just a backup solution with imaging of disk (as ghost)? I use a drobo for all my data storage, so I am not too concerned about backups as the drobo offers redundancy in the event of disk failure. The laptop has a SSD which doesn't have a lot of capacity if I don't want unnecessary tools that will have a lot of space. However if the rescue and recovery offers really useful features then I might consider its installation (and not using the backup feature). I could not make out what marketing materials meant by the solution of a single button for viruses and crashes.

  Second, the client security solution features other than Vault/Manager password on my model? I'm already using the beta version of the new (4) version of password manager which is autonomous and requires no client security solution. Again once the marketing material does not help a user at home like me understand very well.

  Any help will be appreciated!

  Based on your description I don't think rescue & recovery or Client Security Solution any value for you.

• Rescue and recovery work do not

  I erased from my hard drive and installed Ubuntu. Now I need Vista to use some software to test for my state bar examination. Rescue and recovery disks as well as keep the f11 system restore gives me an error of starting. Vista is gone for good? Lenovo wants to charge me $45 to send discs that will work. Can get an a .iso for this version (Vista Business SP1 64, I think) somewhere and use my activation key product on the lower part of the PC? I don't have time to search the forums and I'm not an expert. Help, please.

  http://www.mydigitallife.info/2009/04/29/Windows-Vista-with-SP2-RTM-slipstreamedintegrated-DVD-ISO-i...

  something here should work for you.

• How to reset the password of Lenovo Rescue and Recovery?

  Hi all!

  Here's my problem. Recently I discovered that I forgot my password for Lenovo Rescue and Recovery. I guess when I select the option "Protect your backups with a password", I could change my password for each new backup, whenever I remember my old password or not, but apparently not. So now I could not restore my previous backup and could not make a new one. Y at - it an option to reset the password?

  Thank you and sorry for my English

  Solved. Just uninstall the software, reboot, and install again. Now I can do a backup secure again.

• Rescue and recovery under 64 bit creates a 32-bit Windows 7, why?

  Hello. I have an x 201 with W7 Pro (64-bit) OEM Lenovo. I replaced the hard so I use Rescue and Recovery to have a clean install of W7 and the X 201 good pilots.

  What I did to run enhanced backup and restore and then via Advanced Rescue and Recovery, I launched the option "create rescue media. I followed the instructions and created a rescue media USB that as far as I understand leaves my X 201 as it was when it left the factory.

  I booted from the USB without problems, restore the system and to my surprise it installed Windows 7 but 32-bit 64-bit not. And no drivers (no video, no network, no USB/PCI). I'm lost here. Why is installed 32-bit when all items generated under Windows 7 Pro (64 bit) and what about drivers? Why it has not installed drivers?

  Looking at Enchaced backup and restore in my original installation icon, he says "Lenovo Enchanced backup and restore (32-bit)", so I don't know if that creates only the 32 bit instead of 64-bit OS.

  I'll now factory recovery disc option allows to see if that solved the problem.

  At this point, I thought that icon factory recovery disc was the same as the use of "create rescue media", because the two pretend to leave the hard drive in the same way, it was when the laptop has left the factory.

  If someone could clarify the difference between the two: 'factory recovery disk'vs'create rescue media', and also why the last of them creates a 32-bit OS rather than the 64-bit what it was supposed to create

  I will report how it goes with the task of recovery factory disc that I use now.

  Hello

  Quite interresting situaiton and to be honest not usual.

  However, what should happen, once you have created a rescue media, it's that you should have on the end, a single bootable media, using which you can save, etc.

  However, this support of rescue should not contain any OS, it should be only a boneless bootable media. The operating system and the rest should be on a separate stand.

  In the case where you had the original x 64 Bit OS, then using the recovery CD (as you confirmed as) should have restored the system to the State, as you received it.

  I don't understand, why it needs to change the version of the OS to another, when you initially x64Bit.
  Maybe some background info would be useful.

  See you soon

• Rescue and Recovery

  Hello I have a new W520 with windows 7

  I tried several times to back up my files with an external USB with the RESCUE and RECOVERY

  After many hours of backup, I get the following message:

  "The backup was not completely successful."

  Until the error message is told that he cannot back up my file of Emails.

  I have re-uploaded the RESCUE and RECOVERY software and I get the same error message.

  Thank you

  Joseph

  
  

• Rescue and recovery software will not remove preinstalled Partition

  I recently had a T450s by a great process and tries to get her comfortable environment again.

  My two latest Lenovo laptops had a recovery in the stock installation partition, and I was able to remove simply by running the top software and selecting an option amounting to "delete backup partition" or something allowing me to back up c.

  On this machine, I ran the software and he gave me an option to create a recovery media more. I installed the software, Thinkvantage Rescue and Recovery, and he has an option to delete backups, but does not recognize the partition.

  It's deeply annoying, I do not use it and he eats up to 15 GB. If anyone has a solution for this, please let me know.

  ADDENDUM:

  Moreover, now the software on the partition is not ongoing, saying: it does not find "recovburncd.exe" and try again. Help, please.

  So reinstall RNR has failed, but I realized that I could go into administrative tools and modify the disk partitions.

  I now have this problem solved, thank you for your comments.