Reserved access to the url group refused by keywords?
Hello.
I'm configuration ASA 8.4 for SSLVPN allowing Web access with Group-url portal.
I noticed that if I put some keywords after the slash on the access client group-url, would be denied by http 404 error.
Here is my configuration:
type tunnel-group test remote access
tunnel-group test general attributes
Group Policy - by default-test
tunnel-group admin webvpn-attributes
allow group-url https://1.1.1.1/admin
The url above does not work. If I change group-url that does not begin with "admin" that is to say, the 'group-url https://1.1.1.1/abc turn on' it works fine.
I'm güssing DDT CSCtd61732 has something to do with it.
-----------------------------------------
CSCtd61732
Workaround solution:
Don't use keywords in the url group
-----------------------------------------
Could someone provide more information on the "reserved keywords"?
What other keywords reserved not to mention that "admin"?
Thanks in advance.
Hello
Basically:
Admin
capture
https://1.1.1.1/capture/test/Capin
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a0080a9edd6.shtml
One pointing to the ASDM and the second is to get a capture packets of the ASA.
I hope it helps.
Tags: Cisco Security
Similar Questions
-
I use a brand new Win 7 computer. I downloaded Firefox thinking it would be just the same as my previous version-8. ?
I don't + on the tab toolbar to add a new tab.
In addition, I loved the group by tabs and used a lot. All of the boxes in the upper right corner to access the page group is not yet there.
To make sure that I was getting Firefox without problems, I downloaded from Firefox. The first time I downloaded it with Google Chrome. I am familiar with the games that MS Wins plays with Mozilla.
Can you help me?
Hi jb4long,
You should try to start Firefox in Mode safe by holding SHIFT while it starts. Then, you must choose to disable all add-ons and use the default theme. That should put things in order.
You can also take a look at this article on customizing the toolbar. You can put the tab icon in your toolbar or groups you can access it by pressing CTRL + SHIFT + E
Hope this helps!
-
&; quot; Security for access to the url error &; quot;
Hello
I have two problems,
an I get error of scripts cross-domain as indicated in the title of the message is to say "security to access the url error.
I tried to access using webserice and http service requesta and a web service request. I kept getting the same error. I tried to put the crossdomain.xml file in the root of the server and he had no luck either. Any suggestions would be helpful.
one of the operations in the wsdl file is called getlookupvalues, and it takes 4 parameters, database, username, password and lookupid. the lookupID is a GUID.
When I tried to create a request to getlookupvalues with the above parameters that it kept giving me compile erros saying incompatible correlation of type guid and string. Think is because I am past the guid as a string. A way to pass a guid as a guid instead of a string?
Thank you very much
Aerts
Sort the cross-domain problem using mx:Webservice, and not a httpservice.
-
With regard to access to the URL parameters of the form oracle on the duration
Hello
I use form oracle 10g and I just want to know, is it possible to access URL parameters in the form of oracle on the time of execution in the form code.
I'll illustrate the problem in depth.
For example:
I have an abc.fmb form and when I compile it and run it. It will be opened in a browser with the following link
http://172.12.51.10:7778/forms/frmservlet? config = pkamble
Now, I want to access or I want to perform a task based on the URL config part just after the '?' mark the sign inside the code of abc.fmb
So, I'm curious to know any suggestion here of your elders.
I tried to find the same using the code block within the abc.fmb following the shutter button one time new form instance
If (: PARAMETER.config = "pkamble") then
message ("Hi Pkamble");
end if;
I get an error saying that Bad Bind variable 'PARAMETER.config '.
Please suggest here.
I'd appreciate the help! :)Try it
MESSAGE (GET_APPLICATION_PROPERTY (CONFIG));
MESSAGE(' '); -
11.1.2.3 jdev how do I prevent users from access to the URL Taskflow
We have a taskflow that has the parameter url-invoke-authorized.
This taskflow takes 2 parameters - entity Id and mode
In the form of research corresponding to this entity, we have 2 buttons - view and edit.
If the mode is edit (Edit set button on the search screen), detail of the page opens in edit mode. If she is seen details of the page opens in read-only mode.
We have an obligation to not show the button change on the entity if the entity is defined as 'ReadOnly' in the database. I was able to do it easily on the search page.
But if the user is very intelligent and open new browser and stick the URL of the taskflow with 'Edit' as the mode setting, so I need to somehow implement the logic above - which is to check if the entity to which it wants to change is not read only status... otherwise I have to change the mode as 'View' setting and open the taskflow programmatically.
How can this be achieved?
The router has no definition of the page, but if you right-click on it and select go to definition of page it will create one for you. How do you check entityStatus? Why not put this logic in your implementation of the entity object or a transient attribute? Then you expose the attribute in your VO, and then you just need to get the definition of the page in your router. Once it is in the definition page you can use to select the activity you need to flow to go.
-
I get the attached error message when trying to access my gmail account "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. The problem started today. No problem before.
Second problem, though less of a problem - I'm using Firefox 16.0.2.I tried to upgrade to the latest version and received the following message "ERROR the requested URL could not be found.
I can still access my gmail account but my IPADHello robd, please check firefox > options > advanced > network > connection - settings... if firefox is configured to directly connect to the internet ('no proxy').
-
Have Windows over recent Technical Preview build 10041, Firefox Nightly x 64 39.0a1 10. Firefox will be launched, but when the browser seems no entry screen as possible. Cannot access settings, cannot put the cursor in the URL box. Tried unsuccessfully compatibility modes. I can not able to use this browser on Thursday, March 26, but it worked without problem Wednesday, March 25. My speculation would be that among the latest two updates nightly broke it. The displayed issue of Chrome, like Firefox does not.
Hello, this seems to be a known bug that is being developed (bug #1147953).
Please also note that windows 10 is in it's pre-release preview State and there are still changes the basic platform, it will not be fully supported by firefox and things are required to be wrong on occasion. -
I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.
Windows: Tools > Options > advanced > network > settings
OSX: Firefox > Preferences > advanced > network > settings
Linux: edition > Preferences > advanced > network > settings
Set your settings to connect to the 'No proxy', if you are not using a proxy.Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".
-
Windows asks for a password when you try to access to the "view work group computers."
We are on a network. Main computer, that we can access through the receptionist connect you and access shared files on this computer. Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers." We tried to use its password. However, the shared files are still not accessible.
Hello
1. what happens when you enter the password?
2. how many computers are connected to this working group?
Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP
http://support.Microsoft.com/kb/318030
I hope this helps!
-
Every time error message:
\\BOX A\ShareDoc is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command.
I went through the forum after forum and I can not always win.
I tried
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa restrictanonymous. The value data is 0.
- -> Panel-> network connections-> area connection-> properties-> Advanced-> Windows Firewall settings
- Panel->-> LAN-> properties-> Internet Protocol (TCP/IP)-> Advanced-> WINS-> enable NetBios over TCP/IP, network connections
- Network connections-> Wireless connetion-> properties-> install-> protocal-> add-> microsoft tcp/ipversion6 and then add Protocol->-> NWLink IPX/S/NetBIOS compatible transport protocol
- -> Panel-> administrative tools-> local security settings denied access to the computer from the network = remove all users
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters-> Dword value = IRPPACKETSIZE = 18
We'll call the problem BOX computer and the computer in the network of ZONE B.
Computer configuration:
All firewall disabled, Windows and McAfee on all computers on the network.
All VIRUS Protection disabled on all PCs
BOX A sharing the shared Docs
Sharing Docs user = everyone
Everyone has a FULL ACCESS.
NetBios is enabled.Configuration of the Working Group:
Workgroup = AREA A = ZONE B = MSHOME
I can successfully Ping BOX A go BOX B and vice versa.Measures to control the error:
I have Open View Workgroup Computers and BOX A and BOX B see each other and to themselves.
The BOX can access files of the shared BOX B.
BOX B cannot access the shared files A BOX.
BOX B can access its own files shared over the network.
BOX A cannot NOT ACCESS its own files shared over the network.I try next? Why can't display BOX A there own shared via the network, the documents?
I'm still not win... any suggestions?
Thanks for the tips. I found the problem.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters-> Dword value = IRPPACKETSIZE = 21
I had to climb higher I guess. This fixes the problem described above, but now he has opened a new WIndows 7 PC interfacing program with the Windows XP working group.
I have more reading to do.
-
Hello
This afternoon, I tried to install the home group. When I did, I got a message that windows could set up homegroup for this pc. (I'm not sure if this is relevant, but it's the last thing I did with windows before my problems started).
-At the moment when I try to go to c:\, I get an access denied message.
-When I go on c:\Users\Patrick then it shows my files and the directory.
-When I opened a word from this directory document, it works (so I have read access).
-I can't make a new folder in my home directory.
-When I start for the mmc instance get Windows cannot access... 0x800704b3 error code after diagnose I get an error that convenience store could not start error code 0 x 80070005. (it happens with all windows utilities.
-When I start safe mode it restarts after a few seconds (after he show users)
-When I try to activate the account administrator to the command prompt it says access denied.
-When I try to access the settings with the UAC, it does not.
-When I start a normal program (like VS2008) it starts up, when I do as an administrator I get the same error that when im from the mmc.I have my PC from Vista
Homegroup only works for Win7, Win7. So I don't know what you were doing. Try a system restore to before that you did whatever it is that you did. You can start with your Vista DVD and access to restore the system from there. MS - MVP - Elephant Boy computers - don't panic!
-
Access to the LDAP VPN ASA group
Hello, I have configured the access remote vpn on asa with ldap authentication. But I can't limit access vpn with specific ldap group.
Here is my config:
AAA-server AZPBTDC01 (DC_Internal) host 192.168.10.250
LDAP-base-dn dc = company, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = Netuser, OU = Services users, or is ASM HQ, dc is company, dc = com
microsoft server type
LDAP-attribute-map AZPBTDC01LDAP attribute-map AZPBTDC01
name of the memberOf Group Policy map
map-value memberOf "CN = VPN_Admin, OU = ASM group, OU = ASM HQ, DC = company, DC = com" RA_ADMIN_GPinternal group NOACCESS strategy
NOACCESS group policy attributes
VPN - concurrent connections 0
client ssl-VPN-tunnel-Protocol ikev1
address pools nointernal RA_ADMIN_GP group policy
RA_ADMIN_GP group policy attributes
value of server DNS 192.168.10.251
VPN - connections 3
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list IPSEC_RA_ACL_ADMINattributes global-tunnel-group DefaultRAGroup
NOACCESS by default-group-policytype tunnel-group IPSEC_RA_ADMIN remote access
attributes global-tunnel-group IPSEC_RA_ADMIN
authentication-server-group LOCAL AZPBTDC01
authorization-server-group AZPBTDC01
Group Policy - by default-RA_ADMIN_GPThe problem is all the domen users can connect to the vpn. ASA does not ranking filter in a group, no VPN_Admin group users can connect, but the man should not be able to connect.
If it is possible to make this approach work, I wouldn't do it this way. Use rather DAP (Dynamic Access Policy).
The instructions for this are here:
Search for "Active Directory group" to jump directly to the corresponding section. Note that you may need two policies DAP. One to match users living in VPN_Admin and another default policy to deny access to everyone.
Note for the default "opt-out" policy, that I often make it pop up a message to the end user, saying that they do not have VPN access and contact xxx if they want to fix it.
-
My user is a member of the Administrators group, but I got ACCESS DENIED with some files?
I know the meaning of the trace, I did not sense trace in this sentence! Once again, I don't undrestand why a user as an administrator cannot access anythings?Administrators can access anything, but they often need to take ownership of a file or folder to open it. By examining the details of the property, the owner can easily say that an administrator has reviewed his file or folder.
-
During the transmission of the ports, I accidentally changed the HTTP field to 8080, now I can't load the router config page on entering my ip in the URL bar (could not load the page as if fault not connected to the internet). Can someone help me regain access?
Hello
Do you mean that you have changed the TCP/IP admin on 8080 port?
If so, http://
: 8080 should do. Tricky
-
Hi all
I developed an application where I have 6 pages and 5 tabs and based on the user role I posted the tabs for the user to access these pages.
But when the user, who doesn't have access to the particular page (say, page 2), but still the user can navigate to it directly by typing the page number in the URL.
I want to avoid such scenarios.
eg: http://Apex.Oracle.com/f?p=110:2 , when the user type this in the address bar, it navigates the user to this page even if this particular user does not have access to this page.
How to prevent the user to navigate through the URL, if the user tries to navigate directly through URLS rather than tabs, I have to give the error message.
Version: ORACLE APEX 4.2
Thank you
Good reading this recent post
Re: Authentication at the Page level
All links to a page and the page itself must be secure.
You can also consider the protection of session state to prevent tampering of the URL.
Maybe you are looking for
-
My iphone 5s clique on random spots on screen with touch me.
My iphone 5s clique on random spots on screen with touch me. He also sometimes I won't let me click on some letters.
-
Hello world. IM Chinese. im working on the inspection of paint using the LabVIEW Vision module. I want to know how to convert RGB to CMYK, and any VI in NI Vision is available? I looked but found nothing. no idea please, thank you.
-
Change the drive letter of the system drive on Windows XP SP2
Hello. There is a certain task I want to accomplish, but I can't figure out how. Here's the situation: I have 2 hard drives, each separated into 2 partitions. 1 disk partitions have the letters C: and G: assigned on them. The drive 2 partitions recei
-
jZip.This application has requested to terminate in an unusual way
HelloI get this message when I try to use jZip.This application has requested to terminate in an unusual way. . Microsoft visual C++ Runtime Library Program Runtime error: this Program Files (x 86) jZip\jZip.exe All this under Vista. This all happene
-
This configuration has worked with the previous XP machine in a network with Vista machine. After that replaces the xp machine, which is directly connected to the (now 7 machine) XP vista machine sees the printer but will not work. I get an error mes