Canon IP3500 printer works with Windows7 64 bit, but I can't make it work with my 32 bit Vista on a network computer.

Similar Questions

• I tried to install jk1351 plotter cutter drivers but just can't make it work.

  Original title: jk1351 cutter plotter usb drivers

  can someone helo I tried to install readers, but just can't make it work no matter what idears

  Hello
   
  1. what operating system is installed on the computer?
  2 is this mentioned USB-specific problem?
  3. were you able to install the drivers successfully?
  4. what happens when you try to run the cutting plotter?
  
  Note: Try again with different USB ports and see if that helps.
   
  Method 1: Follow the article if you have Windows 7 computer.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  
  Method 2: You can also try to check with the manufacturer and see what they have to say on this.

• I have an inventel wireless USB2VGA USB, but I can't make it work on Windows Vista Basic.

  I have the network... USB inventel wireless adapter but I can't make it work on Vista home basic, my pc can't find or install the driver required for this, all I get is a saying of the screen, the Cohiba 3887 rev0 necessary... But it worked on my Win XP can someone help?

  original title: Cohiba 3887 rev0

  http://www.google.com.au/search?hl=en&q=Inventel+USB+Wireless+Network+adaptor+Cohiba+3887+Rev0&btnG=Google+Search&Meta=&aq=f&OQ=

  http://www.google.com.au/search?hl=en&q=Cohiba+3887+Rev0&btnG=Search&Meta=

  Have searched through a lot of places, but can't find any mention of Vista drivers for your hardware.

  Have you tried to contact the manufacturer in this regard?

  If XP drivers do not work in your Vista machine, and no driver available Vista, time to buy a new.

  See you soon.

  Mick Murphy - Microsoft partner

• Should what download I do Canon iP3600 printer compatible with Windows 7?

  Can anyone advise what DOWNLOAD I need my printer compatible with Windows 7?

  The Windows 7 Compatibility Center reports a compatibility with printer Photo Inkjet Canon PIXMA iP3600 in 32 - bit and 64-bit Windows 7. (report full here).

  

  You can get the current drivers and software support from Support of Canon PIXMA iP3600 hereon site. Make sure that you choose the correct version of Windows 7 you are using (for example 32-bit vs. 64-bit).

• I downloaded a 64-bit adobe flash, but I can't make it work. What should I do next?

  I downloaded a 64-bit adobe flash, but can't make it work. What should I do next?

  What is your graphics card, the driver version & date?  See http://forums.adobe.com/thread/945765

  Try turning off hardware acceleration improves the situation; See http://forums.adobe.com/thread/891337

• I have a new kodak printer which is a 7520 type but I can't use or repair

  I have a new kodak printer which is a 7520 type but I'm unable to fix it, the suffix that has been selected in terms of network installation!

  I'm sorry this is not clear, but I am disabled and bought the printer from QVC. He has worked with an old computer so I'm upset, but

  I didn't know that it was impossible to correct configuration of the printer with a wrong code!

  See you soon

  Gordon * address email is removed from the privacy *

  Hello

  I'm sorry, I couldn't seem to find this exact model for a Kodak printer number. Please visit the Kodak Web page and download the driver for this printer. http://support.en.kodak.com/app/answers/list/c/890/selected/true

  Once you have installed the new drivers, the printer should work just fine on the new computer. When you download the drivers, you will want to pay special attention to two things. First of all, making sure that you have found your exact printer model, and second, that you know which version of Windows you have on your computer.

  I hope this helps. Just reply to the results.

• Printer seems to sweep very well, but I can't print

  Original title: print printer print scanning

  I seems a printer hp laserjet m1319f mfp scan but it not there no printing on the file that is sent to the computer.what can the problem?

  Hello

  1. What do you mean when you say no impression on the file? The option is grayed out?

  2. This only happens with a particular document you want to print?

  3. were you able to print before without any problem?

  4. did you of recent changes on the system?

  You can try to run the printer Troubleshooter and check if it helps.

  Printer in Windows problems

• Can I get help to install my web cam? I have the cam connected but I can't make it work.

  I would like help with my web cam, I can't make it work. Can someone please tell me what to do?

  Hello

  -What is the serial number and model of the webcam?
  -Is the webcam compatible with Windows XP?
  -What is the status of the webcam in Device Manager?
  -You get an error message?
  -Have you installed the latest drivers for webcam for your operating system?
  -Is the issue relevant to a particular application?

  Please see:
  How to manage devices in Windows XP

• I can't start a desktop connection remote with my file server, but I can't get to my domain controller. Other computers on the network can initiate together.

  Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Can't scan on my Photosmart2575 after installing Windows7. Printing works fine. Scan for Vista OK

  I moved from Vista to Windows7. This went well.

  I installed the drivers for Photosmart 2575 and I can print and works well!

  Scanning problems.

  I used in Vista: HP solutions Center, but now I get the error message (in Dutch): "no HP products found. Center of floor will be closed.

  On the disappointed printer "scan now": I get the message on the screen: "select computer" and then only: look in your documentation.

  I also tried to install the Printer Wizard, but after running just before the loan of 100%, I get an error message:... Visual C ++ Runtime error.

  I hope someone can help.

  Thanks in advance, JoopWM

  Hello Joop

  Glad to hear that you found a way to scan. If you're up for it, the instructions below would be the next steps. It should not effect your ability to access the Web server integrated (EWS) and should 'own' or 'scrub' all your computer hp printer drivers. This should allow a reinstallation of the software of the printer. The result should be a centre of solutions of job once again, and this can also dispel the Scan Doctor C++ runtime error and printing (Print and Scan doctor may be trying to call data from a corrupted file).

  Let me know what happens.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/' > Adobe Flash Player»

  9 download drivers and full software features

  2575 Photosmart Full Feature software (Windows 7)

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/' > Adobe Flash Player»

  9 download drivers and full software features

  2575 Photosmart Full Feature software (Windows 7)

  10. run the download to reinstall the printer

• How can I get/install "print spooler"? for 32-bit vista

  I get a message that I can't install the driver for my HP J 4580 printer.

  Hello

  link below is to the drivers for your printer model; Select the operating system in menu drop-down

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3645100&LC=en&cc=us&DLC=en&lang=en&cc=us

  and here is the information for installation, troubleshooting, etc. for it

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3645100&LC=en&cc=us&DLC=en&lang=en&tmp_track_link=ot_we/prodlink/en_US/3645100/loc:0 & cc = us

  ________________________________________________________

  and see if that helps you

  Printer problems

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  ·                         ________________________________________________________________

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·                         ________________________________________________________________

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• 32-bit Windows7 64 bit Vista drivers needed

  Hi all

  I'm looking to confirm drivers that need to be used when upgrading a custom install of Vista 32 bit to Windows 7 64 bit

  My system is a Pavilion a6109n is a 64-bit system

  I use vista 64-bit drivers that are the only drivers 64-bit available?

  Again something I do not have the HP disk I bought directly at retail.

  Message edited by MsRoboto159 on 11/19/2009 08:00

  Hi MsRoboto,

  Your Vista drivers will probably not work. Some of them might, but probably not worth the hassle of trial and error. Since you use complete installation of operating system Microsoft, you would probably be to wipe out all of your existing software and data, particularly since you're going OS 32-bit to 64-bit. Then save info all important first.

  Here are the links for Win 7 drivers, you will probably need:

  Chipset

  Audio (accept any agreement from Realtek, click Next and then download Win 7 version).

  You will also need to find applications such as a DVD player and disc burning utilities. After you upgrade if something does not work well, tell us in the forums and we can help find other drivers or software that you need.

  For reference, here's your specifications.

• Activation problem with hard disk containing Vista deleted from a computer dead and installed in a work computer.

  Problem: HP laptop with Vista installed suffers an untimely death. The installed hard drive with Vista is still OK. Hard disk has been removed from the HP laptop and then installed in an old Dell laptop. Windows Vista is complaining that Vista is not valid and must be activated. I get the activation from valid product key and the activation utility responds with an error 0xC004E003 code and will not activate. Microsoft does not support chat or e-mail for Vista and I can not even a phone number to talk to a human being. I think I should be able to remove Vista from a computer and run it on another without Microsoft having a problem with it. What should I do for this? Any help will be appreciated. Thank you.

  Property to true. An OEM Vista license does "die with the computer. Conditions of licence for the version of Windows 8 have changed compared to the terms for the most comparable Windows 7 or Vista or XP. In my opinion, the terms are now even more restrictive, more or less.

  Good luck exploring alternatives to the BONE. Some Linux distributions are well worth a visit. Ubuntu, Suse and Mint are quite simple to install on a wide range of material. I'm not familiar with the Apple/Mac or Android offers, but many speak well of them.

  Calculation of the happy.

  Tom Ferguson

• Insertion of an element with a css in muse html. This is a table with a fixed column in dreamweaver, I wrote, but I can't make it work.

  is there a way to do this miss me I tried to insert html objects, but not luck.

  Your code works well. A couple of things must be changed much.

  

  In your HTML code, remove the first line:

  Add your css to your CSS in the Page Properties in the Meta tab in the Head section. But you must also add the Style tag in your css. It would therefore be:

• Targa files used to save the paths, but I can't make it work now.

  I use targa files provide my marketing team with images that work in their planning of space including the transparency program. I use an alpha channel to do this, and this part is working fine. However, I used to record these targas on our network drive and they would retain paths we created so that we can easily select different parts of products and change the color for the proposals of the marketing team wanted to do.

  It was a bit of time, because this feature has stopped working for me, and I can't for the life of understand me why.

  They take substantial resizing after the fact, just so their generation of the PSD file every time is not an option. There the images full size from time to time even when, and I don't speak of thousands of images. The size that should be on our network would make IT BM in their collective pants.

  Edit: I guess I would say that I've recently updated to CC, but I had this problem before then with CS5 as well. On a Mac, running the Mavericks.

  Targa files include not paths - there is no room for them in the targa file format.

  On Mac OS, some additional information (including access roads) used to be saved in the resource fork.

  But since Apple has deprecated the resource API, Photoshop CC stopped writing or reading resources.

  And record in a volume that does not support resources would have stripped the resource in any case data.