Reset and resume quiz after reviewing - 8 Captivate

Similar Questions

• Unable to resume the quiz after reviewing (Captivate 7)

  I want the ability to resume the quiz and read it again. If I fail the quiz on the first attempt, both review and complete recovery buttons. However, if I first review quiz and make it back to the results page, the recovery test button is gone.

  Is there a way can I fix? I can't find anything in the quiz preferences that would indicate the recovery button disappear after reviewing the quiz.

  No, the way as Captivate Quiz is designed, as soon as you use review, the possibilities of recovery have disappeared. As they say 'by design '.

  If you stay with issues by default, you will have to deal with it. Maybe the rollback feature could help, where you send a user to a content slide when it fails to a question. But that means he must answer every question correctly, prior to it.

  Lilybiri

• Captivate 5 - revision Quiz - Questions and missing buttons after review

  Hi, I have a question about the feature of revision quiz in Captivate 5.  When I review quiz, questions and the buttons do not appear.  I checked the transition between slides to "fade in" only.  Questions remain missing after the review.  Figure out and can't find any post related to this issue.

  Thank you.

  Ok.  By the look of your screenshots you have deleted some elements of the quiz question slides.

  Were you remove all standard legends such as the legend of title or caption Quiz, or items such as the control box?

• After review of the Quiz 1 time the Retake that button disappears

  Does anyone have a solution to make the Retake Quiz button appear after review of a quiz?

  If you the quiz of reviews on you do not get the chance to take the Quiz.  Captivate was suggested (and I agree) that it would be cheating if a person could just a review Quiz, find the good answers and then resume the Quiz to spend with these answers.

  Once you review Quiz, you must raise the lesson to try the quiz again.

• I can not open after installation Add ons, reset and unistall it and re install, but the same proplem

  I work with firefox for a long time without any prplems but suddenely I can't open then reset and then install a few toll bar and the user agent changer Add ons after that install them I can't open at all then reset but useless and then reinstall more time after removing the profile but the proplem even more. knowing I used them (the toolbar and the user agent changer) for a long time more than year with firefox without any proplems.what that's happened?

  Please help me

  You must contact the addon developers to prevent this, Firefox has no responsibility of an addon with a bug.

• Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Do you receive an error message?

  Are signed with the same Apple that was used to get these apps at the start ID?

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

• How can I reset my laptop to Nov.2010 - I have problems opening and send emails after January 2011

  I had problems opening and sending emails after January 2011 so I wanted to turn my back on Nov.2010

  Hello

  You cannot use the system back restore more than you have Restore Points. The only one
  Another option would be to return the system to its out of the box, as it was when
  you received. So, it would be better reset your e-mail settings and check with
  the support of your email provider.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ============================================================

  These can help with system related issues:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =============================================================

  This is Hotmail:

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  -------------------------

  And Windows Mail

  Windows Live Mail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solution Center - Solutions mail - Mail Forums
  http://windowslivehelp.com/

  Windows Live Mail - mail Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  I hope this helps.

• Asus Vivo tab RT hardware keyboard stopped working after the default reset and updates.

  Separated from this thread.

  My Asus Vivo tab RT after the default reset and updates my physical keyboard has stopped working.

  but I can use the mouse by using the touchpad the touchpad works a few keys on the keyboard as...

  music, fn, FN + brightness work. but the letter keys are not. When I am pressing on the keys, they make sounds, but does not...!

  Hi Srikanth,

  I understand that you can not use the alphabetic keys on your tablet.

  To better understand the issue, please send us the following information:

  1. You are able to use the external keyboard with the laptop?

  2. Is this problem specific to certain keys or all alphabetic keys have similar problem?

  This problem could occur if the filter key is enabled, please disable filter keys and see if the problem is fix.

  Follow these steps to disable the filter key

  1. Press the Windows key + R.
  2. Type of control
  3. Click ease of access.
  4. Click on change your keyboard works.
  5. Uncheck the box that says Activate FilterKeys.
  6. Click Ok.

  You can also see the following article for some common troubleshooting steps that can be performed on Windows 8.

  http://www.Microsoft.com/hardware/en-IE/help/Windows-8/troubleshooting/keyboard/using-keys

  Hope this helps, get back to us if you need further assistance for Windows.

• Station working 12, after suspend and resume, kills the host graphics performance (15.10 Kubuntu/Ubuntu host).

  When I suspend and resume my comments on VMware Workstation 12 Pro systems, using the command "vmrun suspend", my system very fast host (Kubuntu 15.10) suffers from a terrible performance issue after standby.  Graphic files, such as photos, now take 20 seconds to display on the host system to the place instantly. Here is an example of command that shows the problem to a 2.5 MB JPEG file on my host system.

  display of $ IMG_1234.JPG

  Other graphics software become even slow on display: geeqie, eog, etc.. However, the cp command is always instantaneous for the same file, so the problem does not seem to be related to the disk:

  $ cp IMG_1234.JPG whatever.jpg

  
  

  The problem remains until I have suspend the VMs system again (or stop).  If I take it back once again, the problem sometimes returns immediately. Other times it comes back after a few hours or a few days. (The problem is intermittent, but suspending the VMs always makes the problem go away.)

  If the graphic file is small, it displays quickly.  The slowdown is proportional to the size of the graphics file.

  When I run a strace of the 'View' command, I see that the delays are produce for the read() of the image file. No errors appear in/var/log when the behavior occurs.

  I suspend the VMs every night automatically (vmrun suspend) before that cron runs a backup of the entire system (using rsync). Then I have them back manually in the morning when I wake up. Sometimes, the problem is present and sometimes not.

  Two virtual machines use shared folders to access the host system.

  The problem started after upgrading my host of Kubuntu 14.04 15.10 LTS, and VMware Workstation version 10 to version 12. (Both at the same time.)

  System details:

  • VMware® Workstation 12 Pro, 12.0.1 build-3160714. Two virtual machines: Windows XP and Windows 7 Professional.
  • The host system: 12 cores, 32 GB of RAM (28 GB free), SSD
  • Using the new system for graphics (G-Force graphics cards)
  • Under Plasma (KDE) for host GUI.

  Thanks for any help!

  The issue is resolved by disabling hugepages transparent in the nucleus of the host.

  Non versioned: VMware workstation 11 on Ubuntu 15.04 high utilization of the processor resolved

• Class and class quiz in Captivate 8

  I'm trying to create a course where there are 3 or 4 lessons.  Between each lesson, a quiz of unclassified reference (2 or 3 questions) just want to build content for the learner.  These questionnaires tell the learner if they are wrong and gives feedback on the correct answer.  At the end of the lessons, I want to have an assessment of the 10 classified issue that will test on all of the content.

  I have problems separating the benchmark tests and the overall assessment.  I want to use the functionality of button on the results page, but when the learner clicks on "take assessment", he takes for unclassified reference tests.  When the student clicks on the button "Edit", it includes the baseline tests.  Also, if I have two question 2 unclassified reference quizzes throughout the course and 10 questions graded at the end, the results page shows 14 total issues.

  I currently have the reference quiz with a score of 0 and the issues of the final assessment with a score of 10, but for the reasons given above, I want to know if it is possible to have several quiz during operations or other means to solve these problems.

  Any help is appreciated!  Thank you!

  Hello

  The problem here is that it can never be a quiz in any given Captivate project. So when you add these questions "unclassified", they are still part of the unique quiz.

  Probably, you need to rethink the approach here. Instead of using the real issue for the parties 'unclassified' slides, it just create normal slides and place the text captions, Images and buttons or click on the boxes that will behave as if it was a slide in question built. This way Captivate doesn't treat them as part of the quiz.

  See you soon... Rick

• Pause and resume the download after the judgment?

  Is it possible to stop the download and resume after a stop/restart?

  Download: CS6 Master Collection trial

  System: Mac OS X 10.6

  Yes.

  In Adobe Download Assistant, next to the progress bar, you will find a pause button quite small.

  If it does not automatically start, click the same button and it should begin where it left off.

• Google ping goes from 25ms to 900ms shortly after the reset and stays there

  Hey everybody,

  My internet is REALLY slow for a few weeks.  I've isolated the problem to my LinkSys E3000.  My bandwidth is fine, but response times are unhappy.

  When I reset and ping Google, I'll take 20-30ms for maybe 30-60 seconds and then he leap to 700-900ms response time.  If I have the wiring in my modem, I get 20-30ms response time.

  I am running the latest firmware: 1.0.06

  I tried:

  -Reset to factory settings

  -Wireless-N to use only on the 2.4 GHz and 5 GHz individually (the other cutting)

  -To select various different channels, click on auto for both

  -using the WPA/WPA2 mixed as well as strictly personal WPA2

  I am at a loss...

  Thanks for any help!

  Matt

  I thought about it.  This is my backup of cloud BackBlaze.

  BackBlaze says I have backup to 0.7 MB/s and the problem goes away when I strangle the equal or less than 0.5 Mbps upload.

  Weird.  I would not have guessed my E3000 to struggle with a rattling wireless because of this.  My download bandwidth never had no ill effect - just answer reallly slow loading time of pages and what not.

• View the resume Quiz button

  Adobe captivate 9

  I checked the 'Resume Quiz button display '.  However, how do I know the button to start at the beginning of the quiz?  At this time the Start button on the slide.  Any ideas?

  The Retake button Reset all the answers in the quiz slides and return the user to the first marked point or question slide. Nothing else to do which allows multiple attempts on Quiz level and by checking the option to show a recovery button. The recovery button should disappear when the Quiz level attempts are exhausted. I don't understand what you're trying to explain. Can you give more details?

  You can check the Advanced Interaction Panel: you will find it all marked.

• Different results Quiz after Quiz attempt message

  Hello

  We have an assessment that is fixed at 60 percent, with two attempts. We want to customize the quiz attempts to result message after that learners have reached the limit of quiz.

  Captivate does not have a second quiz result message when learners have exhausted their attempts.

  The same quiz result message appears twice. We want to have a result message different quiz after the second attempt.

  Even the return to the quiz through advanced actions doesn't seem to work.

  Does anyone have a possible workaround for this solution?

  We use 6 CP.

  Thank you

  Hello

  Action to return to Quiz is supposed to when you get out of the scope of normal question slides (which will extend the dynamic range quiz) by dragging a user in a content slide, recover from this content slide to the question slide that it was before the navigation. If this has nothing to do with your goal. In what context have you tried to use it and how?

  Avinash, hope you don't mind when I say that you simply for many, it won't be so easy. User will have to take care also of the "past" situation, and in addition you must hide the text captions that might have been visible in previous situations. And there is still the default Quiz results message that appears if you don't take care of this as well!

  Here is my solution:

  1. Go to the settings of the Quiz, preferences and open "Quiz result Messages", uncheck the two pass/fail messages; normally they would appear in the placeholder review, you can reduce its size, move it, but don't delete it (may cause problems). Configure the other options (such as the number of attempts)
  2. Create captions of text or shapes used as containers of text for each attempt AND the Pass message. put them all to invisible. In the example of the screenshots, I had 3 attempts to Quiz, created 4 text captions: Text_A1, Text_A2, Text_A3 (for 3 attempts) and Text_OK (to succeed)
  3. For the event of the slide from score to enter, create an advanced conditional action with 4 decisions (each has only a part of HERE, no ELSE): first 3 are fail-scenarios, is modified to Pass-scenario. Here are a few screenshots (maybe I'll post with all the screenshots on the blog if I find time today):

  

  

  

  Lilybiri

  PS You posted this at the same time, hope you read that and you'll know how to get rid of the default message

• Reset the fingerprint reader after you remove all the prints/pw does not

  Yes Im a fool, but is anyone know how to reset the reader of fingerprints for U200-115. I deleted my fingerprints after reviewing the password but now can't get to do something that the password does not work. I was informed that a BIOS password reset is the only way (i.e., a visit to the people service Tosh).

  Does anyone know a work around?

  Unfortunately there is no work around. The BIOS password can be removed by only authorized service provider. I really don't understand why the password still exists but ASP is your last chance.

  The closest contact with ASP and they will do it for you. If you need addresses and phone numbers please visit http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good bye