Resize a side of solid, without mirror effect

Similar Questions

• Please help me: the mirror effect

  Hi, I'm creating a mirror effect on one of my videos in first pro, so far the actual mirror effect is without work how I want that there. Im not sure if Im using it worng, but I want to have the same image twice, just next to each other right on mirror. Every time I Googled what he just tells me how to return vertically or horizantally.

  Theres a picture below for reference. Any help would be greatly appreciated. Thank you!

  

  the mirror effect controls seem awkward, but I think that if you set the angle of reflection to 180 degrees, then you put mirror on the left to match your example. then change the center of reflection to set the mirror.

• I need iOS with airplay and without mirror 10

  I used my IPAD to stream Showtime for years now with Airplay without mirroring.  Now the new iOS 10 don't leave me with mirror and SHOWTIME seems to be the only one that will work with the mirroring on.  How do I get it off the coast of mirroring on the new iOS 10.

  Hello. The new control centre has two parts. Slide up, then to the left to access the right pane where you will see the devices available for AirPlay base already mentioned.

• iOS 10 will not broadcast play without mirror

  I used to be able to play sound from my iPhone 6 to my Apple TV with sound only, but since the update to iOS 10 this has changed. I don't particularly want my iPhone screen upward at the TV when I play Pandora. But I can't find an option to turn off mirroring without also turning off the sound. The mirroring of the screen become mandatory or did someone knows if there is a hidden parameter to the screen mirrored off the coast, but by keeping the transmission of sound through Apple TV?

  Thank you

  Hi Pixelwarrior,

  Thanks for the update to iOS 10! I understand that, updated, your iPhone is in mirror and Airplaying your Pandora app but you want to just Airplay without seeing your iPhone screen 6 on your Apple TV. You can use your control to Airplay just your music Center.

  Content of the antenna of your iPhone, iPad or iPod touch

  1. Connect to the same WiFi network on your iOS device and the device you want to AirPlay to.
  2. On your iOS device, slide up from the bottom of your screen to Open Control Center.
  3. In the control center, swipe horizontally to find the current playback screen.
     
  4. Select your AirPlay device:
     • On your iPad, in the list of available to AirPlay devices, select the device you want to AirPlay to.
     • On your iPhone or iPod touch, tap on to find a list of the available airtime devices, select the device you want to AirPlay to. need help?
       
       

  You want a content AirPlay from iTunes on your Mac or PC?

  Content how to time of antenna of your iPhone, iPad or iPod touch

  You can use the steps or on the link above for more information on the use of airtime without mirroring. Please use the Apple Support communities to post your question. Good day.

• AirPlay without mirroring in iOS10

  I want to know how to use airplay without mirroring.

  I used to use my phone apps using airplay without mirror but

  now the new update mirror option account so I can't use any other application without slaughter video.

  Hello. In iOS 10, normal airtime menu is on the right (player) of the Control Center page. Just to confuse you

• How I have high-end clip .mov but without the effects of stairs?

  How I have high-end clip .mov but without the effects of stairs? The clip is in a unique sequence film, set at 1920x1080p60. Is there a tutorial? I have had no luck searching for the answer. Thanks for any help.

  
  

  Type: QuickTime Movie

  File size: 25.4 MB

  Image size: 320 x 240

  Frame rate: 15.00

  Audio Format: 7867 Hz - 8-bit - Mono

  Project Audio Format: 8000 Hz - 32 bit floating point - Mono

  Total duration: 00 01; 22; 03

  Average: 316 KB/second

  Pixel format: 1.0

  Details of QuickTime:

  Film contains 1 video tracks, tracks audio 1 and timecode 0 track (s).

  Video:

  There are 1232 executives for a period of 1/15th.

  Video track 1:

  The duration is 0, 01; 22; 06

  Average Cadence is 15,01 fps

  The video track 1 contains 1 or more video data types:

  Video data block #1:

  Image size = 320 x 240

  Compressor = Photo - JPEG

  Quality = Normal (3.00)

  Audio:

  Audio track 1 contains 1 or audio data types:

  Block of audio data #1:

  Format = 8-bit - Mono

  Rate = 7867 Hz

  Compressor = None

  Premiere Pro CS5.5.2, Master Collection, S & T - Ed.

  HP i7-970 3.2 GHz, 1.5 GB GTX580, 16 GB DDR3 1066 MHz.

  I hate to be the bearer of bad news, but there is really no way to do what you want to do.

  Here's why.

  You currently have 320 pixels and you want to show the 1920 pixels. This means that the software must do six pixels of a pixel that you provide. He basically has to duplicate them. He can do a little better with a mix, possibly using the current engine CC in Photoshop to do the job instead of Premiere Pro.

  Then, he must take 240 in 1080 and it's 4.5 pixels for everyone that provide you.

  Then you ask to play each image four times from 15 to 60.

  No offense, but you're asking to turn an ear of pigs in a silk purse.

• How to change a solid without scale (height and width)

  How to change a solid without scale (height and width)

  Thank you!

  Select the solid and press Ctrl + Shift + Y (or CMD + SHIFT + Y on a Mac) or go to layer > solid settings

• How you resize one. FLA file without destroying the animation?

  I'm not an expert in flash huge by any means, but I'm working on a banner and I need to take the largest banner 336 x 280 and resize them to 300 x 250. I change the size of the stage and shrink down bitmaps etc is fine. The question I have is the amino graphics and buttons I have on the scene. I tried to change several frames, onion skins etc to do but little matter what the animation will edit again that the first place, I clicked on the symbol. He goes the small size and moves to the larger size and its position on the old original size.

  It seems that there must be a way to set the animations without having to redo all. Right?

  The practice makes it (almost) perfect.  Buttons (as in the symbols) are almost autonomous movieclips, in the sense that they have their own internal deadlines.  But if they are driven outside, such as in the display somehow passes, then they would need the same consideration than anything else that lives in a scenario animation.

  You should try one of the suggestions of the well kGlad.  Just choose the main scenario together in the larger version, right click it and copy images, then create a movieclip empty in a new smaller size file and paste this timeline in the timeline of the new movieclip. (right-click the keyframe is empty, select Paste frames - the entire timeline should stick intact).  Then you can adjust the scale of this movieclip to adapt to the new size of the stage.

• How to do like a hall of mirrors effect

  Hello, I want to use an effect in a video like the one used in the "Zlad - Elektronik Supersonik" http://www.youtube.com/watch?v=lp_PIjc2ga4 video (15 seconds in the video) which is a bit like a Hall of mirrors or type infinate echo effect. The video that I use is almost identicle to that one, but instead of a person on a keyboard in front of the green screen, he's a drummer in front of a green screen. I tried to play with the echo effect but was not able to get the same type of effect. Anyone have any ideas on how to do it? Thank you. =-)

  The Echo effect works on the displacement of the pixels. It is based on time, not position. If you player is essentially standing still, you won't get anything that resembles the effect above. You can get this effect by moving the entire layer, before dialing, then application of Echo to the demo.

  If an item is located in the upper right of the first image and in the lower left corner in the 10th and you apply echo to the layer with the right settings you will have a bunch of copies of the layer as part of 10th that show all the posts between frame 1 and 10 (IOW 10 images). If the element is not between 10 and 20 at the time wherever you get the last frame you'll only a copy of the visible element because pixels will not be moved to the last 10 frames. With the help of echo on your drummer, you would get a lot of time with echoes of her arms move, not a bunch of images of the drummer as a Hall of mirrors. IOW, you see 10 arms, 10 drum sets.

  Here's what I'd do with a drummer who basically is stationary. First of all, I would like to make the layer to a 3D layer. Then, I would apply this expression to the position property of the layer.

  inc = index * 20;//each layer offset 20 pixels
  x = value [0] - inc;
  y = value [1] - inc;
  z = value [2] + inc;
  [x,y,z]
  

  The expression is quite simple. The first line defines a variable called Inc., bringing the number of layer (index) and multiply that by 20 pixels. The next three lines takes the value of each variable position of a 3D layer and modifies the value of the increment 'inc '. I subtracted 'inc' of X and Y to move the image up and to the left, and add "Inc." to the value of z to move the layer to the camera.

  The last step is to duplicate the layer as many times as you like echoes. You could bind the "Inc." for a cursor of expression on a layer draw so you can animate the offset.

  If you want the movement to echo that you would simply sequence layers so that each starts a frame or two after the first. This is what has been done in the example of youtube. The image was offset in X Y and Z of the space (or scaling), then the start time of each layer has been moved so that the mobile arm seems to follow the movement of the arm creating a wave of stage effect.

  I hope this helps.

• Yet WT8 - mirror effect on the TV screen does not work

  Hello

  I have a KDL42-W653A TV that supports the screen mirrored on WiFi.

  However, I can't make it work with the Tablet Toshiba still W8.

  The Tablet detects the TV, I enter the number, but the TV never shows the tablet screen.

  Television and the Tablet are on the latest firmware.

  Another thread indicates there is an update for the HDMI in January. I hope this covers too.

  Anwar

  Hello

  > I have a KDL42-W653A TV that supports the screen mirrored on WiFi.
  By mirroring of the WiFi technology you mean exactly?
  Miracast, Intel WiDi, DisplayLink?

  Toshiba still supports * Miracast *.

  To use Miracase both devices must support this technology.
  Then, you can connect to an external display that is very easy:
  Settings on the tab-> change PC-> PC settings and devices-> devices
  Here, you need to add a device and tablet you will begin the search for a Miracast of devices
  After the connection has been established, the Miracast device name appears in the spotlight

  Have you tested the video output from the table to the TV with a micro-HDMI cable?
  It work?

  Here is also a nice youtube video on the output screen Toshiba still WT8 options
  http://www.YouTube.com/watch?v=kBmInOnrS2U

• After Effects using 5 GB of ram for the preview of a video 12 MB in size without any effect.

  I after effects CC 2015 to date.

  My terms of reference are:

  CPU: i5 6500 3.2 Ghz

  8 GB of RAM: DDR4-2133 MHz RAM

  Storage:256 GB SSD (on which After Effects is installed)

  1 TB HARD DRIVE

  Graphics card: GeForce GTX M 970, 6 GB

  All the drivers are up to date.

  The problem is: I create a new project and import a video in. The video has a full HD resolution and is 12.5 MB in size. First of all, it takes a minute to play the video of RAM so that it begins to play in real time. Then, the video is 30 frames per second, but reading the preview, he plays at 60 frames per second (frame rate is defined as 30 fps in composition settings). I saw the RAM usage in the Task Manager and After Effects using 5 GB of RAM. Then I applied an effect and the CPU usage rose to 100% and it took about 5 minutes to get the applied effect, and after that, After Effects crashed.

  I'm quite new to After Effects, but I'm also a tech geek. I tried to play in the settings but it didn't help. I also searched on google and forums, but to no avail. This problem is essentially what makes the software unusable for me. Please HELP!

  You do not want to edit long movies in AE. After effects is NOT video editing software.  A non-linear editing (NLE) like Premiere Pro is for editing photos to tell a story. AE is for compositing, Visual effects and graphic cartoons. It is for the creation of clichés that you then use in an NLE.

  I suggest to get at least 16 GB of RAM to work with AE, but your system should work as it is. You will need to learn to manage your memory well and to get a glimpse at lower resolutions where possible.

  Now, as to your original question. AE is not simply to play a video stream, as does a NLE. After effects (such as other software based compositing on pixels) with completely decompressed frames. When you put a video compressed in a composition, the size of the original video file has no effect on the size of the images that works with After Effects. After effects unpacks this video and works internally with a full, uncompressed resolution, frames. AE calculates the values of each pixel in each image, comes with a new pixel and then reads these pixels. Who is?

  In fact, since you have so little RAM and the processor is not either, it may be a good idea to convert your video files highly compressed in a good intermediate codec for the shots, that you intend to use in AE. QuickTime with the PNG codec would be a decent choice. This way AE doesn't have to do a ton of work to decompress images behind the scenes until you can even work with him.

• How resize the text box (box) without stretch text

  Hello! I'm editing a brochure in Illustrator CS4. There are blocks of text. I want to make the same width. But when I enter the width, I want... it extends (or fun upward) the text. When I manually stretch the text box, it works fine. But I can't get exactly do this way. Is it possible to enter the width and do NOT have the text distorted when resizing the box? Thank you.

  Julie

  Julie,

  You can directly select the path (white arrow).

  IIn this case, you can ClickDrag the segment you want to move.

  The guides are your friends.

• Sony Alpha DSLR camera without mirror works with 700si Minolta lenses?

  I'm in the market for the mirrorless alpha DSLR series. I have my minolta maxxum 700si minolta lenses. I heard that sony purchased Minolta camera technology and used the same mounts of lens for the new sony cameras. Is this true? I really don't want to buy the unit to see if the lenses to adapt and villages do not work.

  Thank you.

  Your Minolta lenses works perfectly on any of the SLR from Sony (three digits model) and boxes (two model numbers) I AM as is. Sony mirrorless cameras (a digit and four-digit numbers model) can be used with an adapter. Sony sells two adapters, THE-EA3 ($200) that takes in charge THE-EA4 ($350) , which supports the AE and AF (although slowly.) but not AF and AE

  Sony mirrorless body are nice, but adding the adapter makes bigger, heavier and more expensive than the SLT/SLR bodies, and they do not work as well.

  I suggest that you take a look at Sony A99 ($ 2,000), A77 II ($900) or A58 ($450).

• Definition of area of purge without any effects in the document size dialog box

  Hi all

  
  

  Can I create a new document with the bleeding, it works very well. Should I try to change the lost funds, it seems not to be saved by the document size dialog box.

  
  

  Here is my code to create the document:

  NewDocCmd InterfacePtr < ICommand > (() Utils < IDocumentCommands >-> CreateNewCommand(K2::kFullUI));))

  NewDocCmdData InterfacePtr < INewDocCmdData > (newDocCmd, UseDefaultIID());

  newDocCmdData-> SetCreateBasicDocument (kFalse);

  newDocCmdData-> SetNewDocumentPageSize (PMPageSize (width, height));

  newDocCmdData-> SetWideOrientation ((width>height)? kTrue: kFalse);

  newDocCmdData-> SetMargins (left, top, right, bottom);

  newDocCmdData-> SetNumPages (numPages);

  newDocCmdData-> SetPagesPerSpread (1);

  newDocCmdData-> SetColumns_4 (colNum, gridDist, IColumns::kVerticalColumnOrientation);

  newDocCmdData-> SetUseUniformBleed (false);

  PMRect bleedBox.

  bleedBox.Left (mm2pt(bleedLeft/1000.f));

  bleedBox.Top (mm2pt(bleedTop/1000.f));

  bleedBox.Right (mm2pt(bleedRight/1000.f));

  bleedBox.Bottom (mm2pt(bleedBottom/1000.f));

  newDocCmdData-> SetBleedBox (bleedBox);

  Create the new document.

  CmdUtils::ProcessCommand (newDocCmd);

  The document size dialog box shows my correct bleeding.

  And this is the code I use to change him bleed (suppose bleedBox has different values now):

  InterfacePtr < ICommand > pageCmd(CmdUtils::CreateCommand(kSetPageSizeCmdBoss));)

  InterfacePtr < IDocSetupCmdData > pageData (pageCmd, IID_IDOCSETUPCMDDATA);

  pageData-> SetDocSetupCmdData (docRef, PMPageSize (width, height), 1, 1, width > height, kLeftToRightBinding, kTrue);

  pageData-> SetUseUniformBleed (false);

  pageData-> SetBleedBox (bleedBox);

  The SetPageSizeCmd process

  CmdUtils::ProcessCommand (pageCmd);

  No error, but also no change in the dialog box the size of the document. Purge values are unchanged.

  What else I have to call the dialog box to show my new bleeding?

  
  

  If I give the word

  	BB2 = pageData-> GetBleedBox();

  then bb2, later the (modified) values.

  
  

  Thanks for all your advice!

  
  

  kb_alfa

  Hi kb_alfa

  Use kSetPageSetupPrefsCmdBoss instead of kSetPageSizeCmdBoss

  -Manan

• How to hide text in 3d without bevel effect?

  I am trying to create the illusion of this word (Culture) connection between the woman and the man. When I add a text mask, bevel edge changes each time the mask is applied. Is there a work around or a simpler solution? Do not fear the work of rough hide. I did a quick job just to illustrate what is happening.

  Thanks in advance!
  

  Before dialing, apply the mask on the layer from the model. Basics of EI. Time to learn.

  Mylenium