Resizing and turning with the scale tool

Similar Questions

• Expansion of the photos after turning with the crop tool

  Hello

  I'll try a second attempt for my desire to add a feature to the crop tool:

  I like the crop tool in lightroom, but there is a feature that I miss:
  Sometimes I have this situation:
  http://www.Flickr.com/photos/ellersiek/2633499034

  Knowing, that in most cases limiting the cropping is ok, I wish to have an option to enlarge the resulting image like this:
  http://www.Flickr.com/photos/ellersiek/2632678737

  It is correct, if there is an option in the preferences with the ablility to select a color for the 'new' pixels and the crop tool will only enlarge the photo while pressing the Ctrl key (to avoid unwanted results).

  You can say: ' take the picture to the right, move your camera ", but in these photo sessions, we have good reasons to take the pictures in this way.

  With greatings from Germany
  Ralf

  Hi Adobe engineers and a big thank you, solve you my problem - after seven years.

  And no, I'm not kidding, I'm really grateful (OK, a little joke on :)) speed

  Now in Lightroom CC 2015.6, I can use the transformation tool not really new and his new (was it really new? I don't remember if this function exists in the previous version) feature of the x - and y-movement to solve the problem.

  Here is an example, where I missed a small part of the carneval agree in the upper left corner:

  LR-cropping-issue 1 | Flickr - Photo Sharing!

  After cropping and rotation, I've lost important elements in the lower left corner and the man moved too much to the left:

  LR-cropping-issue 2 | Flickr - Photo Sharing!

  Now, with the transform tool I can bring that part:

  LR-cropping-issue 3 | Flickr - Photo Sharing!

  And now, I only develop the sky and the small missing part of the color in photoshop:

  LR-cropping-issue 4 | Flickr - Photo Sharing!

  It's a big improvement for me.

  Thank you again for the Germany

  Ralf

• How one is resized an 'image' with the cutting tool?

  I would like to resize an 'image' of a part of one of my accounts on the Internet I did using the cutting tool.  I was able to do this with Windows 7 and have been unable to find a way to do it or to find a solution through research on the Internet.  Maybe the problem is the program that opens the image in full screen only.  Needless to say that Windows 8 is all new to me - a few weeks of usage and I know I have a LOT to learn!  And... I hope I picked the right area for this help!  Your help is greatly appreciated.  Thank you!

  Hello

  I'm not clear - you try to do this in Windows 7 or Windows 8?

  Whatever it is, the basic procedure is:

  1. open the cutting tool.

  2. create the new chiseled image.

  3. Select Save as.

  4. give it a name and select the image type from the menu drop down.

  (PNG is generally preferable for screenshots)

  5. save it to the desired location on your hard drive.

  6. open in an app - integrated image editing paint will do.

  7. open the image that you saved earlier.

  8. click on resize (in painting its on the home tab, in the upper part).

  9 select whether you want to resize a percentage or a non-specific pixels & enter the settings.

  10. Select maintain proportions if you want to keep the ratio width even height.

  11. click on OK.

  If you use Windows 8 and when you double click on an image it goes to an application full screen then it looks like this file type can be associated with the application of the user interface modern Photos. Please see:

  http://Windows.Microsoft.com/en-GB/Windows-8/choose-Programs-Windows-uses-default

  For more information about how to change default programs in Windows 8.

• brush lag issues and latency with the Brush tool

  Since the update I have problems of serious lag with my brush tool. I can't draw anything, because the program can not deal with my shots. I have a very capable office; What gives?

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• Problem with the signing and packaging with the signature tool CC Extensions

  Hello! I tried the tutorial 'Short for HTML5 Guide' of Hallgrímur Björnsson. I ran every step as described. The creation of the certificate is successful. Only the packaging does not work. Each time, I get the same error message: error - Arguments are invalid. Process failed. (See the screenshot). I tried it on 3 different computers with the same result.

  I use

  PC, Windows 7

  Extensions CC signature Toolkit (version 26 June 2014)

  myCertificate

  C:\Users\My-PC12345\Desktop\signing\ccextensionswin64.exe - selfSignedCert us Washington myOrganization 'John Smith' password myCertificate.p12

  Sign

  C:\Users\My-PC12345\Desktop\signing\ccextensionswin64.exe-signer HelloWorld / HelloWorld.zxp myCertificate.p12 mypassword

  

  What I am doing wrong?

  I do not have idea. Can someone help me?

  Thanks for reading.
  

  
  

  Thanks for the reply. You gave me an idea! The space is ok. But I must, of course, specify the full directory again:

  C:\Users\My-PC12345\Desktop\signing\ccextensionswin64.exe-Signe C:\Users\My-PC12345\Desktop\signing\HelloWorld/ HelloWorld.zxp myCertificate.p12 mypassword

  Now, it works great!

• Slide 4 LR seems to disable Dock and interfere with the upper tool bar

  After the upgrade to 4 LR, I found that a slideshow I created in LR 3 had lost most of its features, including the music and the text associated with it. After the replacement of these characteristics, as well as a few others that were missing, I found that the Dock has been disabled altogether and the top toolbar was hidden, unless I moved the cursor to the top of the screen and it is held. I downloaded and installed LR 4.1. I use a MacBook Pro with v. 10.6.8. Does anyone else have this problem? Someone knows how to fix this?

  Try to hit that the 'F' key a couple of times to scroll through the options of window size. My guess is that you change Lr in full screen or full screen with menu mode. Using the 'F' you should cycle throug the 3 options screenmode. The dock must be available in at least one of the views. As the toolbar above, click the triangle to open the context menu and choose 'Manual' (see screenshot below).

  

• Illustrator CS5 distorts vector in resizing, using the scale tool

  When resizing a group of vector in Illustrator CS5 with a custom made symbol in Group I get the distortion of the proportion of the form.

  

  I tried

  • Tried resizing with the selection tool now the shift or option
  • Disable snap to grid of pixels in the transform Panel
  • Disable snap to grid of pixels in the option symbol
  • Checking Guides enabled for 9-slice scaling is enabled
  • Check Stroke Scale and effects is disabled in the preferences

  Can you help me resize it without distortion?

  Have you had the symbol selected when you disable snap to grid of pixels.  Try to extend the symbol

• Problems with the radial tool and the gradient filter tool.

  I have suddenly problems with the radial tool and the tool filter degraded.  They are turning to my red while selection that the assets and not with the results of the any adjustments.  It is a new issue and out now where

  Does that help? Note that the tool must be active to see the check box.

  

  In addition, another reason, that you do not see it could be that the toolbar is not displayed. The toolbar display switch is to press the letter T.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• I can't open sites in a link. I had the same problem with another site and it's the compatibility tool but I check that and I am still unable to open

  I use vista, some updates have been loaded and now I'm having problems to open a link in a Web page.  I had this problem before and it was the compatibility tool but I check that and it still does not work.

  Go to control panel | Internet Options | Programs and IE set as the default value.  If this does not work, then go to control panel | Default programs | Associate a type of file or Protocol with a program and then the page down to HTTP and HTTPS protocols and associate them with IE.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I use vista, some updates have been loaded and now I'm having problems to open a link in a Web page.  I had this problem before and it was the compatibility tool but I check that and it still does not work.

• How to sample the color with the eyedropper tool and have it be the foreground color?

  How to sample the color with the eyedropper tool and have it be the foreground color?

  Use the keyboard shortcut to set the default foreground sample.

  The sample of foreground (top left in the screen shot) is visible and you just click on the color with the eyedropper tool to change.

  You can also use x to exchange the undertone in the foreground if you want to change that.

  

• Adobe offers cloud the ability to share and collaborate on a PDF file, which may be increased online as for the images with the pen tool?

  Hello

  Can someone share a PDF to images so that the employee can use the pen tool to increase (x-out arrow, circle, go here) with the pen tool, online, in the cloud of Adobe Document?

  Thomas

  Hi thomasbrigantino

  You can share PDFs using Adobe Doc Cloud, but you can't supplement online and collaborate.

  However, you might find 'share of comment' feature of Acrobat interesting DC: using Acrobat | Starting a review PDF

  Kind regards

  Rahul

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• I can't move the anchor points on a shape, I've drawn with the pen tool.  There are also small circles with a point in them (think focus), who they are and they are part of my problem.  If I open a new document and draw randomly everything is good, no foc

  I can't move the anchor points on a shape, I've drawn with the pen tool.  There are also small circles with a point in them (think focus), who they are and they are part of my problem? If I open a new document and draw randomly everything is good, no anchor and focus points behave.

  Bubble icons are the widgets corner. You can drag inward to round the corner. They are not part of your problem. If you want to hide them, select view > hide corner Widget. I have a hotkey defined for this menu item.

  If you see multiple bullseyes, you may have your set with the shape selected, that would prevent you from being able to move individual anchor points. Deselect the shape first, and then move the anchor with the direct Selection tool.

• Can resize is no longer with the Selection tool

  For some reason, I can no longer resize objects with the selection tool.  When I click on an element, the handles appear, but remain strong.  When I choose at the level of the item, the entire item moves.  Any suggestions?

  Cmd (Ctrl) - SHIFT - B, which is the toggle to show/hide the rectangle enclosing or perhaps Cmd (Ctrl) h the toggle to show/hide the edges.