Slide 4 LR seems to disable Dock and interfere with the upper tool bar

Similar Questions

• CS5 disable select content photo with the Selection tool

  I don't know if this was added in CS4, because I skipped CS4, but I know it wasn't there in CS3. With my selection tool (solid slider), I can grasp the content of an image represented by Mark circle block that appears in the center of an image on the mouseover. If I come near her, I take the picture, not the framework (which I don't). But if I keep my selection more close to the edge, I select the box and content (what I want). How can I disable this feature? I looked through my preferences without result. I mean, I thought that was what the direct selection tool for? If I want the selected content, I use the hollow cursor. Why mess with that? Please tell me this can be disabled. That would make my day.

  A common query, some people like it, others hate it, I am among the latter.

  Go to > Extras > hide content Grabber.

• brush lag issues and latency with the Brush tool

  Since the update I have problems of serious lag with my brush tool. I can't draw anything, because the program can not deal with my shots. I have a very capable office; What gives?

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• Resizing and turning with the scale tool

  I don't know if this is a dumb question or not, since I already use FW for the past three years but still have not seen option. My problem is that when I use the "Scale" tool to change the size of an image, if the image is too small, or something like a sprite, the resized image gets all blurry and this is not what I want.
  
  For example, I'm trying to resize or even transform a sprite sheet, but when I do, it'll get all blurry and I need keep it the same way he was before, even if the pixels would be incredibly large with the new size, I would like the image to the same. Is this possible? And if this isn't the case, comment on a good program that can do this? Besides MSPaint (and PS, if possible)? Thanks for the help.

  If you scale or rotate an object of type sprite, you will want to use nearest neighbor Interpolation.

  You to scale an image like this in two ways:

  1. modify > canvas > Image size and choose more close neighbor in the dropdown menu, or
  2 edit > Preferences to have the scale tool use this interpolation method.

  See this image for an example: http://www.mattstow.com/tutorials/nearest_neighbor.fw.png

  See you soon

  Matt

• For no apparent reason, that the upper tool bar line has dissappeared and if I place the mouse on the top of the page, FireFox will go up but not 'file' and now cannot find 'Prinit '. 'History', etc. Help?

  The line toolbar disappeared suddenly and cannot print or check the history. In addition, lower toolbar disappeared so can't see clock, shift to other programs.
  Only occurs with FireFox. If I have access to all site www via FireFox, same problem. I rebooted several times, same problem.
  The operating system of MS 7 Prof
  Dell Latitude

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• Problem with the signing and packaging with the signature tool CC Extensions

  Hello! I tried the tutorial 'Short for HTML5 Guide' of Hallgrímur Björnsson. I ran every step as described. The creation of the certificate is successful. Only the packaging does not work. Each time, I get the same error message: error - Arguments are invalid. Process failed. (See the screenshot). I tried it on 3 different computers with the same result.

  I use

  PC, Windows 7

  Extensions CC signature Toolkit (version 26 June 2014)

  myCertificate

  C:\Users\My-PC12345\Desktop\signing\ccextensionswin64.exe - selfSignedCert us Washington myOrganization 'John Smith' password myCertificate.p12

  Sign

  C:\Users\My-PC12345\Desktop\signing\ccextensionswin64.exe-signer HelloWorld / HelloWorld.zxp myCertificate.p12 mypassword

  

  What I am doing wrong?

  I do not have idea. Can someone help me?

  Thanks for reading.
  

  
  

  Thanks for the reply. You gave me an idea! The space is ok. But I must, of course, specify the full directory again:

  C:\Users\My-PC12345\Desktop\signing\ccextensionswin64.exe-Signe C:\Users\My-PC12345\Desktop\signing\HelloWorld/ HelloWorld.zxp myCertificate.p12 mypassword

  Now, it works great!

• Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Yes and no.

• I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.

  I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.

  Hi Mariam,

  Please try this:-with your PDF document open, click on the "comment section" on the side right of your document, under "list of comments", click the "Filter comments" icon and choose "View all comments" or "hide all comments.

  

  I would like to know if it works.

  Kind regards

  Nicos

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• Files and folders with the same name

  I am trying to unzip some files and folders and it works fine on my computer with Windows XP. However, when you use Windows Vista I can't because there are folders and files with the same name. After an internet search, it seems that the only suggestion is to extract the files in separate folders which then would allow them to keep the same name. The problem is I want what they in the same folder and they need to have the names they have.

  NOTE: I do have two files with the same name in the same folder, I have a folder and a file with the same name. I would have thought that this would be acceptable because they are two things separate, and given that it's great under XP.

  All solutions?

  You are right, if I make a file and a text file with the same name, it works fine. However, when I try to extract the files I need it tells me that there is already a file with the same name as the folder. He goes to tell me to choose a new name but my only options are 'try again', 'jump' or 'Cancel '.

  I think I can understand what the problem is. For some reason when you download the zip file, the computer seems to have added a few files side with any format other than "file." It is those who have the same name as the folders as if they were, and they could not be uncompressed because of this. I have no idea whence they came as they appear from nowhere (compared to my XP). I'm trying now unzip the files separately and exclude the strange s 'file '.

  Thanks for your help though!

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• We receive this 0x8000FFF error and we tried the repair tools and it won't make a restore point.

  We receive this 0x8000FFF error and we tried the repair tools and it won't make a restore point. Help, please!

  original title: Please help

  Hi sassi49,

  What are you trying to do when you get the error?

  What version of Windows are you using?

  If this is in reference to Windows Update, see the following article:

  http://support.Microsoft.com/kb/946414

  I hope this helps!

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all