Resolution of the computer has changed, now every thing is so great, I can't change it back

Similar Questions

• The dock has disappeared on my windows desktop 7. How can I get that back?

  The dock has disappeared on my windows desktop 7.  How can I get that back?

  Windows 7 is not a built-in docking station, but your computer manufacturer might have added a.  For example, Dell computers come with the Dell Dock .  Search in the Start > all programs menu.

• I changed the resolution of the screen now, every thing is so small I can't read anything

  original title: I accidentally changed my screen resolution that now everything is so small I can't read whatever it is, please help me. Thank you. Mack
   
  I have the screen resolution changed accidentally that now everything is small I can't read anything, I tried to go into the settings, but as I can't read something, I can't change it please help me.
  Thank you.
  Mack

  Hi MackLucy,

  Restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options. Select Enable VGA Mode. This should allow you to reset your display settings.

• Location of the computer has changed with the HDD Upgrade

  I live just outside OR Belfast. I just upgraded my HARD for one SSD drive. My computer is an iMac late 2009.

  I had a lot of alerts on my iPhone while allowing this new record, since it is considered as opening session on a new computer, which is perfectly fine. But authorities said that the location of my iMac is now in MANCHESTER, England (including the alert when I logged on my Apple account to ask this question)! Should I worry?

  I'm fighting to understand this. When I go in the Date and time preferences it gives my correct location. Local Apple authorized company to upgrade my HARD drive order in the SSD, probably from Manchester, is there something integral to the SSD which gives a Manchester location? If so, is it possible I can reset?

  Thank you

  Location Services uses the location of the router is using your Mac. The Mac itself has no possibility to determine its location. Extract from on location Services in OS X and Safari - Apple Support:

  Your approximate location is determined using information from local Wi - Fi networks...

  The iMac may contains a location cached to a bygone era - that of FSAA install the SSD. Time zone of your Mac (in system preferences > Date & time > time zone) is based on the extensive location of the IP address of your router and can simply choose the closest major city.

  If so, is it possible I can reset?

  Perhaps. Open system preferences > privacy and security > protection of personal information. Authenticate, then deselect Enable the location Services. Select again.

  If this does not work, try cycling the power on your router.

  If it still does not work, give it a day or more resets automatically.

• Resolution of the image has changed after the calibration of the image

  Hi all

  I put my webcam resolution up to 1280 x 720, but after the Calibration of the Image, the video changed to 1364 x 730.

  This affects at the coordinate of filtering? It is very important in my application.

  BTW, Pattern Matching 4, there is an exit of matches (real world), how to give him information to translate from pixel in mm? Currently I use corresponding pixel and use a few calculations to translate correspondence in mm. And where is the origin of the actual coordinates? It is also in the upper left corner as pixel coordinates?

  Hello

  You can try using the "IMAQ convert Pixel to Real World VI" to transform the coordinates of the pixel to the real world coordinates.

  Best regards.

  Daniel.

• My computer has changed automatically i.e. office, pilot

  I have a HP 64 bit OS with Core I3 processor. I installed on this basic Windows 7 Home Edition computer. I had a problem about several days ago that my computer is changed i.e. funds, fonts, save the location of online storage, etc. It happened when I wasn't using my computer in 3 days. I do not understand why, but when I turned it on, the computer has changed. Today, I have to work with this condition and begin to familiar with it. Honestly, I prefer to work with the performance of the normal computer like that. Please help me how to solve this problem.

  Kind regards

  Evan Adriel

  Indonesia

  Hi Evan,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1 what exactly is the problem when you say, ' my computer is changed i.e. funds, fonts, save online storage location, etc.?
  2. What is the model number of your computer?
  3. you made any hardware or software changes on your computer before the show?

  The problem may occur due to the presence of an infection such as viruses or malware.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Resolution of performance problems and check.
  Reference:
  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Microsoft safety scanner run and check the issue.
  Reference:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• shut computer down, restarted my time and the date has changed

  shut computer down, restarted my time and the date has changed.  My date always gose for December 31, 4001.  Goin whats?

  Hello
  Date and time incorrect after restarting is usually the result of a dead of the CMOS battery. You may need to contact the manufacturer of the computer for help on this issue.

• The Start button and the taskbar on my computer has changed and I don't know how to get back to its original look, I have windows vista

  The Start button and the taskbar on my computer has changed and I don't know what to do to get back to its original state. I have windows Vista

  Hello

  Have you changed the desktop theme?

  Change windows to Classic view

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-to-Classic-view

  Refer: Change Desktop Theme

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Why are some Visual elements will automatically turn off?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-are-some-Visual-elements-being-automatically-turned-off

  Thank you

• The icon of firefox on the desktop and the taskbar has changed, how can I change this back.

  Recently, I installed firefox on another computer and doing other things, I then noticed that the icon in the taskbar had changed and when I tried to put the shortcut on the desktop, the icon that is displayed is a file folder. I want just the icon of firefox back.

  So far I've solved the problem by going into the properties on the icon in the task bar and the icon has changed, rebooted the computer and the icon in the taskbar has changed to what I wanted but the file on the desktop does not, but now I don't want that one, so deleted. Thank you very much for the support provided. At soon BlueWren

• I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD.

  Hello Comunity Microsoft :D My name is Mike and I built a gaming pc. Everything was going well for the first 3 days, but now I have a few crashes very violent. Speakers in loop and buzz and screen lock. I have to completely shut down to go back to a working state. I did everything I could possibly think of to solve this problem, but I can't.

  Then. on the problem. Today, I decided that I was able to solve all the problems by reinstalling windows. I had my keys together and put the disc in. I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD. I do and I get normal loading windows files, and at the end of this road, I get the Welcome screen in windows7 with no option and a fat slider. I don't have the little box that tells me that I can fix my computer or reinstall windows, NOTHING. I tried several times and received the same result<--(Insanity: root="" meaning...="" just="" saying)="" so="" i="" called="" windows,="" or="" had="" windows="" call="" me="" rather,="" and="" the="" tech="" says="" she's="" never="" heard="" of="" such="" a="" thing="" happening,="" and="" walked="" me="" through="" all="" these="" steps="" that="" i="" have="" already="" tried....="" still="" no="" help.="" so="" i="" am="" asking="" the="" community.="" has="" this="" ever="" happened="" to="" you="" and="" how="" did="" you="" make="" it="" work.="" and="" please="" don't="" post="" a="" list="" of="" regurgitated="" back="" log="" fix="" lists.="" rest="" assured="" i="" have="" already="" done="" it="" and="" failed="" to="" receive="" a="" different="">

  Just to isolate the problem, try to download a new copy of Windows 7, and then try again:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Regarding problems with the computer itself, try to disconnect all nonessential equipment attached to it to see if the problem persists.

  I would also try switching around components such as modules of memory to see if the problem persists.

  I would also check to make sure that all components are mounted and installed correctly.

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Notice of reactivation of Windows indicating that the hardware has changed

  Hello

  I just started my computer and it came with a notice of "windows product activation" stating that windows must be reactivated in the next three days because the hardware has changed significantly. Is this true? I've never heard of it before!

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• The appearance has changed, and even the Start button is no longer a circle but the former rectangle that says start after the installation of an update.

  I recently installed an update of Windows for Vista.  The appearance has changed and even the Start button is no longer a circle but the former rectangle that says start.  How can I get the old look back with on the uninstallation of the update?  Thank you

  Original title: updates

  Hello

  It seems that the update was for graphics, as it changed the appearance

  If the update is the problem, you will need to remove it or download and reinstall the graphics driver from your computer or the manufacturer of the graphical Web site map.

  _________________________________________

  Read this information about updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• APP said file is updated, but it is not installed on the computer (has been removed because it does word not running).

  APP said file is updated, but it is not installed on the computer (has been removed because it does word not running). Now, I can't update or download!

  Office CC lists the applications as "up to date" when they are not

  -http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

• Current version of the data in the database has changed...

  Hi, I have an updated report which hurts...
  
  This is the SQL code for it:
  
  Select
  "ITEM_BOM_LINE_ID,"
  "ITEM_BOM_ID,"
  "ITEM_ID",.
  "ID_PROCESSUS,"
  "SEQ,"
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  "VOLTAGE_PROBE,"
  'POSITION ',.
  "POS."
  "DESCRIPTION".
  of ' #OWNER # '. " TOFC_ITEM_BOM_LINES ".
  where "ITEM_BOM_ID" =: P20_ITEM_BOM_ID
  
  In that select it the ID_processus or the item_id is defined. Cannot assign at the same time.
  
  The description field is what hurt. When I run the page and try to write something in the description field on a line where ID_processus is defined this error appears:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum = "B54E29267EC18630B58818FF4B710D41" element = '925466414031BD2DE082A6F954889340' checksum., update of "trailers". "" TOFC_ITEM_BOM_LINES ""ITEM_BOM_LINE_ID"= value: b1, 'ITEM_BOM_ID' =: b2, 'ITEM_ID' =: b3, 'ID_processus' =: b4,"SEQ"=: b5, 'QUANTITY' =: b6, 'UOM_CODE' =: b7, 'DESCRIPTION' =: b8
  
  It works fine when I write something in the description field on a line where item_id is not null. Also all other fields work perfectly.
  
  Can someone tell me whats wrong?
  
  Thanks :)

  Hello

  After a re-read of your OP, I noticed that
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  in your query.
  And it breaks when ID_processus is NOT NULL (and ITEM_ID is null), isn't?
  That's because you change (sort of) the QUANTITY and the UOM_CODE when that happens. Your query retrieves different values than those contained in the database (for example "instead of the actual value). And these 'new' values are compared with the values of database and then there is a difference. Where the error.

  But now: how to solve?
  What exactly are you trying to achieve with this construction? Is there a business rule that AMOUNT and UOM_CODE must be blank if ID_processus is not null? To add a constraint validation to your table and just show the values in your table. Or to show or hide a value of the terms of use. Or use another (made) column in your query that is not bound to a database field.

  I hope this helps...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)