Resolution problem (W500) window

Similar Questions

• Has anyone ever solved the problem of resolution DNS in Windows 8?

  I had my first Windows 8 PC (inspirion 660) and had immediately DNS resolution problems.  Updated to 8.1 and still had problems with DNS resolution.  I am connected to the router via an ethernet cable, no wifi.  I have to flushdns every 30 minutes or more often, just to be able to use the internet.  Have searched and tried the answers online and the only one I see that actually worked for everyone must replace the router.  All the other solutions seem to fail.  All my other computers and devices work fine.

  There is not a widespread (or even localized, as far as I know) problem with the DNS on Windows 8.  If other devices work fine, but your laptop is affected, then there is a problem with your specific machine or settings.  Have manually set you the IP settings on the PC, including DNS servers?  If so, put everything to DHCP.  If this is not the case, try to define the servers DNS 8.8.8.8 and 8.8.0.0 and see if it works any differently.  If so, it's your router or ISP DNS.  If this isn't the case, then it may be that something went wrong on your computer.  Make sure that all Windows updates are installed and that you have the latest chipset and network drivers and the latest firmware BIOS and NIC.

• Default resolution problem (windows 7)

  Since I tried to play Metro 2033 (including my resolution 1024 x 768) on my pc, my resolution is reset to 1024 x 768 at startup.  My display's native resolution is 1080 p I don't know how to change it back, but just, it is up to every time I start up and disorganises my office.  Why is he returning there at - it a resolution setting by default, how can I fix?

  Hello

  Try to update the drivers to check if the problem persists.

  Follow the steps below to update the graphics device manager card readers:

  a. press the Windows key + R, type devmgmt.msc.

  b. develop graphics cards.

  c. click Properties, click the driver tab.

  d. button click on update drivers.

  e. click on the OK button.

  See also section below.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  If you have additional questions, feel free to post. We will be happy to help you.

• Screen resolution problems (Windows 10)

  I downloaded the latest trial 9 Captivate for Windows 10 and screen resolution problems. Basically, making the software unusable. A lot of screens and dialog boxes seems larger than the current window, they are in, making the right and downstairs parts invisible window (usually, this is where the 'OK' and 'Cancel' buttons for example).

  I'm Captivate on a laptop running 64-bit Windows 10 (Sony Vaio with an NVidia GT 640 M map graphic with the latest drivers)

  Does anyone know how to fix this? Here are some examples:

  

  

  

  No retina.

  What is the size of the police on? Win10, it is often larger than 100%, which is not really necessary for your resolution, but that's a retina display. I am using Captivate on Win10, but Surface Pro and laptop have a retina display.

• Incorrect resolution after upgrade Windows 8 to 8.1

  I have W510 4389-pg2 with resolution of 1920 x 1200 with Windows 7 and 8. After upgrade to 8.1 Windows the monitor become blur and resolution is 1920 x 1080. In Device Manager I see driver Thinkpad 1920 x 1080. After uninstalling the driver and installing the latest drivers for W510 and restart (I also tried the drivers for W500) the result is always 1920 x 1080. What can I do to solve the problem?

  OK I found a solution here

  http://www.askvg.com/fix-bold-blurry-or-hard-to-read-font-problem-in-Windows-8-1/

  I was sure it was the bad resolution, because it appeared as it somehow. Sorry for my mistakes.

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• screen resolution problems

  I am running XP Professional service pack 2. Recently, when I go to web sites, I get a message "warning - your screen resolution has not the standard configuration of 1024 x 768 pixels. Some elements of dialogue isn't visible. "When I go into control panel my PC is set to 1024 x 768. It's more annoying, but it's getting more and more worse. Any help would be appreciated.

  Hello
  You can check this link:
  Resources for troubleshooting problems in Windows XP
  http://support.Microsoft.com/kb/307960
  You can also check with the support of the Web site.

• Screen resolution problem. Cannot set above 680 x 480.

  Screen resolution problem

  I have a dell latitude d630 2.5 GHz computer laptop under XP Professional 64-bit operating system.  The screen resolution will not be set above 680 x 480, and when I try to increase the computer stops with a black screen message that don't stay long enough onscreen to read.  Dell advised that they don't or support this machine with the XP operating system and that they have no drivers or other fixes for the problem.  I hope that you will be able to help and thank you.

  Hi dduck11,

  ·         What is the default screen of the laptop resolution?

  You need to update the graphics (video) drivers for the laptop. I see that there are Windows XP drivers available for the same thing. Download and install the updated drivers to see if it helps.

  Drivers & downloads for Latitude D630

• Problems with Windows Installer after using System Mechanic.

  I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  Thank you!

  original title: Registry Cleaner/Windows Installer

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

  2. follow the four methods listed in the resolution section of the following article:

  http://support.Microsoft.com/kb/2642495

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Problem with Windows Media Player on your computer.

  I tried to load a program called Yawcam which can be used to control a webcam.  Installation of Yawcam has asked if I wanted Windows Media Center to view the Webcam.  I clicked Yes.  Serious mistake.  Windows Media Center has taken over my computer.  I have changed throughout most of my icons on the desktop for a Media Center icon, and clicking on one of them causes Windows Media Player start up, even the icons which are always original.  I can't find any setting in Media Player which will solve the problem.  I can't even start Yawcom.  And unfortunately I did not define a recovery point.  Can someone tell me how to retrieve my Windows Media Center desktop icons and return control of my computer myself?

  Hello Camille,.

  Thank you for keeping us posted.

  Glad to know that you were able to find the solution for your problem.

  I appreciate all your efforts towards the resolution of the problem.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  We will be happy to help you.

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem updating Windows in Windows 8 - 0x8007000d

  one of the custom of updates available ran install.i the resolution of the problems, it is said, it sets problems.yet 3, will not install the update. and whenever I run the troubleshooter it detects and resolves the same 3 problems

  

  Hello

  We appreciate your efforts on this issue.

  -Is this problem specific to any particular update or all updates?

  If you encounter the same problem after solving the problems running Windows Update, it means that a file needed by Windows Update is corrupted or missing. I suggest you run the DISM tool and check if it helps.

   

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click find.)
  2. Enter command prompt in the search box.
  3. In the results list, drag down on or right click command prompt, and then press or click run as administrator.
  4. In the administrator: command prompt window, type the following commands. Press ENTER after each command:

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  To close the administrator: command prompt window, type Exitand press ENTER. Run Windows Update again.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Hi, when I click on the blue arrow on my widget options, its not letting me see everything cos its too big. and I can't scroll upwards or downwards to see the options. It might be a resolution problem do not know. Help.

  Hi, when I click on the blue arrow on my widget options, its not letting me see everything cos its too big. and I can't scroll upwards or downwards to see the options. It might be a resolution problem do not know. Help.

  Hello

  Have you tried to rename the folder Preferences for Muse.

  Nearby Muse > GB appdada % in windows explore > rename the folder named as com.adobe.AdobeMuseCC.2014.3 in com.adobe.AdobeMuseCC.2014.3_old.

  Concerning

  Vivek

• Problems with windows 98 in VMware 6.5

  I have problems with Windows 98 in VMware workstation 6.5. I can't get the screen resolution is greater than 800 x 600 or higher than mode 16 color mode color. No 16 - bit. Mode 16 colors. Also, I can not healthy work and does not include the link to the note tech sound on the guest98 Workstation 6.5 support page and even the link which is he's dead. I suspect that resolution and color mode problems have to do with crap, generic video driver emulates fun. Is it possible to use a better? On the issue of sound... no idea.

  My material is important? I can post the form if you need.

  I have not noticed any unknown devices in Device Manager and I'm not having problems restarting.

  Any help would be greatly appreciated. Thank you.

  OK, I dug my Win98 guest and did some tests.

  First of all, I want to apologize to you.  I proposed to install the wrong driver - it bluescreens my guest as well.  I'm really sorry for all of your time, I lost.

  Http://sanbarrow.com/vmx/vmx-sound.html , I find that the default sound card is a "ES1371.  Looking for this model on the web site of Creative gives me another driver.

  The driver that I downloaded is called 'epw9xup.exe' and is 976 KB in size. I get an error unable to 'load newest MIDI', but I get audio startup after you install the above driver.  I hope that your game requires no MIDI...

  Be sure to take a snapshot of your guest before you try to install the driver.  That way if something is wrong you can just go back to the previous snapshot.

  Please try the above driver and let me know if it works.

  I'm sorry to give you the wrong information.