Resources to completely migrate all virtual machines

Similar Questions

• Is it possible to migrate a virtual machine between vcenter servers programmatically?

  Hi all

  My question is quite simple:

  -Is it possible to migrate a virtual machine between vcenter servers programmatically?

  Let's say we have two data centers:

  vcenter1

  -vm1

  -vm2

  vcenter2

  -vm3

  Is it possible to migrate vms between vcenter2 and vcenter1 programmatically? (or vice versa)?

  Also, I'm assuming that the appropriate VLAN and data warehouses across the different vcenters!

  Thank you

  Luis

  It is not possible, vMotion or migration live is in an instance of vCenter, it cannot be covered through two even if you have the data store accessible both vCenters and sets of the host. At best, you can unregister the virtual machine of vCenter 1 host and re-save as on vCenter 2 host, but once again, it is while the virtual machine is turned off.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Migration of virtual machines to vSphere 4.1 to vSphere 6.0

  As the title eludes to, we are standing up a new physics 6.0 Server vCenter Server and need to migrate virtual machines of 4.1 6.0 guest hosts.  I'd love to take the time to create a script that does the following; However, before heading down this path, I wanted to do a ping of the group to see if someone has done something like this before or have pointers to scripts that perform some of these actions already.  Some background and concept:

  • Running 4.1.
  • A new physical Center of vCenter 6.0 will be deployed side-by-side with 4.1.
  • The existing configuration of vSphere HA allows for 1-2 guests down without impact to the virtual machines.
  • The two environment and will be Cisco N1KV, SAN access shared for the same data storages.
  • A new vCenter will be lifted.
  • A single host is identified and VMs evacuated to the remaining hosts.
  • This host will be in maintenance mode, removed from the cluster and close.
  • A clean install of ESXi 6 will be done and set up spec.
  • N1KV will be deployed.

  To digress on the details at the moment... Now markets PowerCLI desired.  This idea is ad hoc and on the fly, so as I write this.

  • identify all the virtual machines associated with a specific data store - will need to work with the local client to schedule downtime for virtual machines
  • Stop the virtual machine
  • Remove the VM of the vCenter 4.1 inventory
  • to connect to vCenter 6.0
  • Add the virtual machine to the vCenter 6.0 inventory (and once we have passed the first host in the new cluster, automatically place the virtual machine by using the DRS)
  • Reconfigure the vmnic with the new Cisco 1000V dvs (will be the same name on both sides, but has a different ID)
  • pull in the keys and the values to a CSV and advancedsetting set to harden
  • Turn on the virtual machine
  • Perhaps a test of ping for the NETWORK card to check connectivity

  The order in which the steps are performed can be switched around, as long as the desired end result is the same: migration effectively virtual machines between two disparate solutions with single medium sharing as a data store.  In which I realize will always be VMFS3.  New data stores VMFS-5 is another task for another time.

  Thank you for your time, suggestions, links, etc...

  @LucD - hi.

  These steps are quite possible with PowerCLI.

  See the script after skeleton, he probably needs some adjustments to fit your environment and requirements

  $dsName = "xyz".

  $vm = get - VM - $dsName data store

  Stop-VMGuest - VM $vm - confirm: $false

  Remove-VM - $vm VM - confirm: $false

  Disconnect-VIServer-Server vc41 - confirm: $false

  $vc6 = Connect-VIServer-Server vc6

  $newVM = $vm | New-VM - DiskPath $_. ExtensionData.Config.Files.VmPathName - confirm: $false

  # Suppose a CSV file with

  # Key, value

  # key1, value1

  # key2, value2

  $advSettings = import-Csv - UseCulture advSettings.csv

  {foreach ($obj in $newVM)

  $advSettings | %{

  Get-AdvancedSetting - $obj entity - name $_. Key |

  Game-AdvancedSetting - value of $_. Value - confirm: $false

  }

  }

  Start-VM - $newVM VM - confirm: $false

  $newVM |

  Select Name,

  @{N = "Available"; E = {Test-Connection - ComputerName $_.} Guest.HostName - County 1 - Quiet}}

• ESXi 4.1 upgrade to ESXi 5.5 while all virtual machines and data warehouses

  We have two servers ESXi 4.1.0 348481 (Essentials) and we need to upgrade to ESXi 5.5 for support of Windows Server R2 2012. We intend to use the interactive upgrade. We want to ensure that the virtual machine is preserved. More precisely VMFarm001 where ESXi is installed in the same data store as VMServer1. VMServer1 is our largest server and cannot be migrated to another data store easily because we are not allowed for vMotion.

  The following layout

  VMFarm001

  Dell PowerEdge R710

  Data store:

  Storage1 - 1.36 TB

  VMServer1 - MS Server 2003

  Install ESXi

  Storage2 - 1.82 TB

  VMServer2 - MS Server 2008 R2

  VMServer3 - MS Server 2008 R2

  VMFarm002

  HP ProLiant ML350 G5

  Data store:

  Storage1 - 95GB

  Install ESXi

  ISOs

  Storage2 - 1.82 TB

  VMServer4 - MS Server 2008 R2

  VMServer5 - MS Server 2008 R2

  I have a feeling I'm worried for nothing given that option during the ESXi upgrade and keep the VMFS datastore.

  Thank you

  Yes, that's correct.

  I recently finished the upgrade of lots of stand-alone hosts ESXi 4.1 (with local storage only) to 5.1 and all were successful. The same process applies to 5.5, so you shouldn't have a problem with preservation of VMFS data warehouses (and all virtual machines).

• Replacement of a data store - migration of virtual machines

  We have a VMware ESXi 4.0 installed on a SD card and our data store is on a dedicated internal RAID array. Our data store is running out of space... what we would do is remove the old hard drives and add new - therefore, delete and re-create the matrix RAID and the data store.

  What is the best way to migrate our existing data store / VMs from the old array to a new one using vSphere or vSphere CLI? How we then re - associate VMs on the SD card with the new data store? Advice would be appreciated. Thank you very much.

  Hello

  Looks like it's a single ESXi host.

  You will need to copy/save all the contents of the data store existing to another location (external HARD drive) while all virtual machines are closed.

  Once it's done and you are sure that the copied data are intact, you can:

  -remove all virtual machines of the inventory

  -remove the data store

  -Stop the host

  -replace the HARD drive with the new

  -Launch the host and to reconfigure the new raid

  -Create the new data store in ESXi

  Copy/restore all data to the new data store

  -Browse the data store and add all the virtual machines to the inventory (create a list to make sure you get all the)

  -Start the virtual machines

  May be a good time to do an upgrade of ESXi5 as well

  Please allow points to useful/correct answers

• How can I pay for the reservation of memory on all virtual machines to "0"?

  I am trying to write a script that will pay for the reservation of memory on all virtual machines that are invited in a cluster to '0 '.  We have book too much memory, and this setting should allow VMWare facilities manage reserves memory for me.  I have hundreds of virtual machines to update, so I can't do it by hand.  I hope that it is possible via the CLI.

  Can someone help me with this please?

  Matt example work certainly, and I'm sure that he was going to follow up with something similar to this after having confirmed if it worked or not because it is much more serious on the optimization of code for speed, but I'll (try to) save the effort. To test its extract on a cluster of 45 VMS, it took more than four minutes to complete.  The excerpt below took about 25 seconds.  The difference is of course to use the cmdlet "Get-View" and that it can run asynchronously so (it begins a vCenter task and immediately passes the following).  Of course, this will also put more of a strain to your vCenter server, so keep that in mind.

  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.memoryAllocation = New-Object VMware.Vim.ResourceAllocationInfo
  $spec.memoryAllocation.Reservation = 0
  Get-Cluster "YOUR_CLUSTER" | Get-VM | Get-View -Property Config.MemoryAllocation | %{$_.ReconfigVM_Task($spec)}
  

• Problem with Migration hot virtual machines Hyper-V

  Dear support

  I am facing problem in Live Migration of Virtual Machine in Windows 2012 of Hyper-V R2 cluster. Here are the details for my current setup.

  Two windows 2012 R2 Datacenter even care Server (HV01 and HV02) both in cluster

  A Virtual Machine created the Volume share of Cluster (c:\Cluster storage\...)

  A network adapter dedicated to the management of server-> 10.0.1.11 (HV01) and 10.0.1.13 (HV02)

  A network card dedicated to Hyper v Virtual Machines-> 10.0.1.12 (HV01) and 10.0.1.14 (HV02) and allow networking option is disabled.

  A network card for the heart beats-> 10.0.20.1 (HV01) and 10.0.20.2 (HV02)

  A network card dedicated for Live Migration-> 10.10.10.50 (HV01) and 10.10.10.51 (HV02) and chosen to be used only for the live migration fails on cluster network settings

  I added the Virtual Machine Cluster Failover successfully without error or warning. When I do a quick migration his works fine but when I do live migration his error giving 21502.

  Please update what's wrong with my setup

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• vCenter shows all virtual machines and the host is disconnected

  Hello

  I have a two nodes in the cluster ESXi6 U2 (recently updated to 5.5) running on hp dl380p gen8. For some reason all the virtual machines are running on host A (HA and DRS are enabled).  vCenter shows all virtual machines and host A is disconnected. Cannot connect to A host using vSphere client or web client. Cannot vMotion the VMs. Impossible to activate SSH. Connection DCUI works very well. Cannot perform any action VM

  All virtual machines are in place are running at this point. I don't want to restart the virtual machines. Can you help me please?

  Thank you

  AJ

  Frozen screen DCUI came back to life. The active SSH access, killed the running process. The host of running backs.

  See you soon,.

  AJ

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• Close all virtual machines on ESXi

  Hello

  I'm new in the administration of vSphere. I would like to raise our ESXi servers due to updates, but I've read that you shut down all virtual machines that are on it. You have something better to do then close VMs one? I expect a powershell script, but I have found none so far.

  Thank you

  Kralijir, you can do it from the console GUI.

  In the left pane, select the ESX host.

  In the right pane, click the tab "virtual machines". Now, you can select block all virtual machines here and simply right-clicking them stop all, or make other changes in bulk.

  Some changes via selection bulk require all virtual machines to be in the same State; Turned off the power, power, etc.

  If it works for you, please mark this answer as the 'response '.

• Migrate the virtual machine fails - "a general system error occurred.

  I have a host in my cluster which I am unable to migrate all the machines. Migration always fails at 13% with the error "a general error has occurred: There is no message after the colon. In tasks and events, I see the following under events:

  • "Migration error" warning: a SNMP trap was sent
  • Alarm "migration error" [name of the VM] action
  • Alarm "migration failure" changed from gray to gray
  • Cannot migrate to [NEW HOST], [STORAGE]

  The substantive test on the list is the first.

  VCenter is version 5.5 and ESXi is 5.1 on the source host and destination.

  The lack of information in the error message let me very well what to do next. It is a cluster of production so I'd like some suggestions that don't involve slaughter the hosted VMs. thanks in advance for your help.

  Take a look at this KB: KB VMware: VMware ESXi 5.x host stops responding when you try a vMotion migration or a configuration change

• migration of virtual machines from vss to vds

  I need to spend all my machines virtual vss a vds

  Basically, all virtual machines are on vswitch3

  I need to move them to dvs3

  I need to move network cards, the vss and vds have already available NIC so I just need to loop if the virtual machines per host and change the portgroup

  So, I have something like this...

  $vss_vlan50

  $vss_vlan60

  $vss = vswitch3

  $dvs = dvs3

  $vmhost_array = @(«host1, host2, host3")

  $vms_vss_vlan50 = get-VMHost $vmhost_array | Get-VirtualSwitch-name $vss | Get-VirtualPortGroup-name $vss_vlan50 | Get - VM

  {foreach ($vm to $vms_vss_vlan50)

  Get-NetworkAdapter $vm | %{

  $_ | Together-NetworkAdapter - PortGroup $dvs - confirm: $false

  }

  }

  Is there a better way to do it? I have to make a loop for each portgroup? I have tons of exchanges

  Thank you

  You can try it like that?

  $vss_vlan50

  $vss_vlan60

  $vss = vswitch3

  $dvs = dvs3

  $vmhost_array = @(«host1, host2, host3')

  Get-VMHost $vmhost_array |

  Get-VirtualSwitch-name $vss |

  Get-VirtualPortGroup-name $vss_vlan50 |

  Get - VM | Get-NetworkAdapter | Together-NetworkAdapter - Portgroup $dvs - confirm: $false

• All virtual machines to an ESXi Server ping

  Hi all

  For a project of mine, I need to create a script that asks for the ESXi server host name,

  and after that start ping all virtual machines that are on the ESXi server.

  I tried to do without success up to now.

  Help will be appreciated.

  Thank you!

  What follows is based on the fact that the VMware tools are installed.

  If they are not installed, you could adapt the script to try and ping displayname VM.

  $esxName = "MyEsx".

  Get-VMHost-name $esxName | Get - VM | %{

  $hostnamePresent = $_. Guest.HostName - don't $null

  {if ($hostnamePresent)}

  $pingable = test-Connection - ComputerName $_. Guest.HostName - count 1 - calm

  }

  else {}

  $pingable = $false

  }

  Select - InputObject $_ - the property name.

  @{N = "This Hostname"; E = {$hostnamePresent}},

  @{N = "responding"; E = {$pingable}}

  }

• Database SQL query to get all virtual machines with comments enabled customization?

  Hello

  Does anyone know of a SQL query that can be executed against the vCloud Director DB for all virtual machines who invited enabled customization?

  I can't have PowerShell to pull these data on a global scale.

  Thank you

  jkasal

  Has taken a quick...

  Select top 10 v.id, v.name, v.vapp_name, v.vc_id, v.moref, ui_vapp_vm_list_view v.guest_customize_enabled v with (NOLOCK)

  seems to have if the setting is enabled or not.

• Gwetting a list of all virtual machines and used space

  
  I apologize for my very basic question.

  I need to make a file (better if an Excel file) with a list of all virtual machines in a simple 5.x vSphere infrastructure including 2 VMare ESXi 5.x servers and the disk space used (allocated, used) of each virtual computer.

  The easiest way seems to list the virtual machines from the vSphere client and export the list as a .xls file.

  It seems simple, but when I look at the file I see a lot of missing VMs or a large number of missing values for several virtual machines (just the Runts).

  Is this a problem with my vSphere client?

  I tried to create a PowerCli script using the "Get - VM|" Select-object Name"command, but my limited skills will let me extract the value of the used space.»

  Can someone please provide a sample of PowerCli I can just copy and use?

  Is there another way to get the information I need?

  Concerning

  Marius

  .

  Not knowing that if you have configured a cluster or just stand-alone hosts, here is one simple line...

  Get-VMHost-name | get - vm | select name, usedspaceGB

  From there, you can make formatting, get total usage etc.