Response frequency (simplified answer)

Similar Questions

• How can I "automate" a question of a single line and response? the answer starts with the right margin and ending on the right margin as it is typed. The sequence would be: 1 type question 2. Tab at the right margin. 3 type the answer ending on the margin

  5.6.1 MacBook early 2015 OS X 10.11.3 pages

  Question: How can I easily format a series of "a line of questions / answers" (questions and answers on the same line.)

  How to easily create a long series of a single line of questions and answers to the question aligning it on the left and the end of the response by aligning right?

  For example

  !. Type the short question on the left margin.

  2. tab at the right margin.

  3. type the answer with the end of the answer on the right margin.

  Insert a right tab at the right margin.

  Peter

• delay in response time when answering calls so that the screen is active (xperia z5)

  When a click 'reply' during the screen is active, it fails the call as expected. It sometimes takes a few attempts. There is a known issue on Android 5.1.1 (Build number 32.0.A.6.200)

  Developer the activated options. See the option key is enabled. I can see to the touch, but answer the phone software is delayed.

  I ran the following tests:

  Operating time

  The screen locked (idle screen): immidiate response

  Screen in use (youtube): 4 keys (4 seconds) to answer or refuse

  Screen in use (whatsapp): 3 keys (3 seconds) to answer or refuse

  Active Screen (home screen): 1 touch (3 seconds) to answer or refuse

  Links: https://support.sonymobile.com/gb/xperiaz5compact/userguide/Receiving-calls/

  Is there a fix or is there an update to correct the offset.

  Thank you

  @z5_sach

  then its probably a third-party app act up

• Mark as 'Good answer' and 'useful response '.

  Hi all

  I did research for an answer concerning this; and find a button, but not the other.

  When we here at the forum provide correct answers and useful, I think that it is as it is written here, practice, reception, mark a reply as 'Useful' and 'Correct '.

  (A) I can view the "Right answer" button But not touch "useful". So the simple question is where is it? Or this function has been removed?

  (B) I have before I start: it is possible to mark one or more responses like 'right answer '?

  (C) ditto "useful answer?

  Thank you friends.

  You can only give the correct answer for a position, but only in the thread you created.

  Multiple useful responses can be given only by the staff of moderators.

• V31.5.0 why are emails sent by others at several targets now all of a sudden see the responses to the original of all all interconnected?

  Joe sends an email to me and one dozen others. As each response, Joe, every answer that comes to me is attached to the e-mail of origin rather than as previously, simply, I would like to get a copy of each answer with no link. Often stakeholders include trivial info which has nothing to do with the original question and there is no way to get rid of the linkage.

  The menu bar, select View-sort by and if threaded is checked.
  If it is check Unthreaded instead.

• JavaScript to collect correct answers

  Hi, in my form 4 questions are here. below the fields of this question, I add some text to add the correct answer. another one of the text fields available to collect a total of points question 4 below. My question answers are below. So if the customer insert the correct answers in the text field, then I want to add + 2 in the total field. If the response from clients resolve questions 1-3-4-5, that the total amount deposited will be 8 points. so thanks for giving me javascript to handle this work. Thanks in advance.

  Text field names

  Q-1

  Q-2

  Q-3

  Q-4

  Response

  Correct answer to the first question is: 1

  Correct answer to the second question is: 3

  Correct answer to the third question is: 4

  Good answer to question 4 is: 5

  OK, that makes more sense... So, you can use this code as a custom calculation of the total field script:

  var total = 0;
  if (this.getField("an-1").valueAsString == "1") total+=2;
  if (this.getField("an-2").valueAsString == "3") total+=2;
  if (this.getField("an-3").valueAsString == "4") total+=2;
  if (this.getField("an-4").valueAsString == "5") total+=2;
  event.value = total;
  

• This question is supposed to answer.

  Hello

  When a question is marked as 'assumed answered'?

  Usually I ignore threads that are marked as answered. Since I can't make the distinction between 'Response' and "Assumed answered" without opening the thread I could ignore the issues that are still missing a correct answer.

  Even there are some keywords like answered or correct in replys that trigger the change of status? Or is it only done by the OP itself?

  It would not be optimal from the point of view of the OP.

  Concerning

  Marcus

  As far as I know, ' answered assuming that the "State is done when a moderator mark a thread as answered.

  Nicolas.

• Download CS6 Master Collection using request / response code - is legitimate?

  I bought a copy of Adobe CS6 Master Collection download and wonder now if it is legitimate. It's instructions go like that.

  1. Download from mediafire.com, what is called "Adobe CS6 license PREACTIVATION.rar"
  2. Unzip and run "Adobe CS6 license PREACTIVATION.exe"
  3. Connect on Adobe.com and sign in with the user [email protected] ID and password included in the purchase
  4. Go to the product download CS6
  5. Download the two files for CS6
  6. Run the smaller of the two files to the collection facility
  7. When asked for a serial number enter "1325-xxxx-xxxx-xxxx-xxxx-3266" (of course the s 'x' were the numbers)
  8. A dialog box appears during installation with a links saying "click later and install CS6. Select it
  9. Complete the installation
  10. Start Photoshop
  11. A dialog box saying "Having problems connecting to the Internet" appears. Click the 'Generate the Code request' activation offline
  12. Take the generated application code and send it to an address of mail in Turkey.
  13. The address of e-mail in Turkey will respond with the response code that I could then get into Photoshop

  This is not legitimate or have I been scammed?

  I asked the Turkish user a few questions.

  1. Can it be installed on two computers which I think is common for such Adobe products? Answer: No.
  2. Assuming that the answer was Yes, should I use this method of response for each installation code? Answer: Yes
  3. Can CS6 be moved to a new computer in the future? Answer: Should use the method of response code
  4. After activation successful using the response code, Belarc Advisor scored a different serial number. Can I use this number and work around the stuff of response code? Answer: No.

  Thank you, Brian
  

  Nothing of what you describe seems legitimate to me... but I'm just another user like you (although I buy Adobe's Adobe products).

• Sum of columns together in the responses, and then calculated off summary columns

  I have three questions answers (with 4 columns) that I have gathered the results for:

  Four columns are: campaign # promoted # Respones, # Respones promoted

  Query 1:

  Campaign, # promoted, 0, 0

  Query 2:

  Campaign responses #, 0, 0,.

  Query 3:

  Campaign, 0, 0, # promoted Respones

  My query returns the following (assuming that the campaign code is ABC) 3 rows:

  Campaign of	# Promoted	# Responses	# Promoted answers
  ABC	100	0	0
  ABC	0	12	0
  ABC	0	0	9

  I want to put in place so that it adds campaign to get a row of results as follows:

  Campaign of	# Promoted	# Responses	# Promoted answers
  ABC	100	12	9

  I can get this result using the conversion to a PivotTable (won't go thought road if possible because I have other calculations that I need to add).   Once I get this summary to a single row result I then do a few such analyses that create:

  1. Response % (Respones # / # promoted)
  2. Promoted to the rank of % (# promoted answers / # promoted)

  When I add the calculatinos to the percentages to the United query I get null or zero for my results.   I used the Add button to insert a calcuation and then I used the following formula: saw_2 / saw_3

  Here's what I would preferably:

  1. Sum of answers (not a pivot table) Table columns.
  2. Add columns calculated at United query that will produce results based on the combined pivot columns
  3. If I use the PivotTable, and then how to get the values calculated for work

  Thank you...

  Ben,

  Try to use the rule of aggregation on the columns in the Table view and see if that makes a difference.

  I just tried this and the SUM of each of the criteria provided the results I wanted, which in turn you are looking for.

  If nothing works for you send me the screenshot of what you are trying to do at vijaybez at gmail and I can understand what is happening properly...

• Mix the responses with the option "All of the above.

  I want to use the "Shuffle answers" the quiz multiple choice type, but I also want to include the response "all the foregoing."

  Is it possible to mix 3 or 4 all responses keeping the answer "All of the above" at the bottom of the list?

  Hello

  Unfortunately, the responses of shuffle will work for all or none.

  Thank you!

• The response format

  Hi all

  My apologies if I missed the obvious solution for this!

  I'll put up a multiple choice quiz (Pick answer A, B, C or D).

  However, the results are not a percentage or a partition.  The results should indicate that you have chosen for the most part A responses or B answers etc.

  Is this possible in 6 Captivate?

  Thanks for your advice.

  To achieve this, you can use multiple choice questions that trigger Actions advanced via the advanced answer Option.

  You must create a user for each type of response variable (AnswerB, AnswerC, AnswerA, replied) and initially to set each variable to 0.

  Then create each of your questions multiple choice with four answers.  Select each answer, go to properties > advanced response Option and set the Action to the level.  In the index drop-down list, select the corresponding user variable for this type of response.

  What then happens is that whenever the user selects this type of response, the corresponding user variable will be incremented by 1.  At the end of the questionnaire which you can then display the variables in the text boxes to show how many times the user has selected each response type, or you can do some simple math to convert the scores into percentages.

  

• 11 GR 2 RAC - on SCAN with DNS

  Hi guys,.

  Just finished 2-node RAC with Oracle VM Virtualbox Setup to test the object.

  I was not a DNS use so, basically, I do the file/etc/hosts as a workaround.

  # SCAN

  192.168.56.91 myrac - scan.localdomain myrac-scan

  192.168.56.92 myrac - scan.localdomain myrac-scan

  192.168.56.93 myrac - scan.localdomain myrac-scan

  A certain documents actually mentioned that if we use the hosts file to resolve the name SCAN, we can have only one address IP SCAN

  I don't really understand what that means. In my setup, I did 3 IPs, and I see no problem with that.

  In my customer tnsnames.ora, I actually use below. Either specify it as 91, 92 or 93, it will happen to load balancing. (or connect to rac1 or rac2)

  RACDB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.56.91)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = myracpoc.localdomain)
  )
  )

  The below also shows, I have 3 fps. As I am quite new to the CARS, I'm trying to understand why the documents mentioned that we should have an ip in/etc/hosts instead of 3.

  Enjoy your advice!

  [oracle@myrac1 ~] $
  Scan of $GRID_HOME/bin/srvctl config

  SCAN name: myrac - scan.localdomain,.
  Network: 1/192.168.56.0/255.255.255.0/eth0

  SCAN VIP name: scan1, IP:
  /myrac-scan.localdomain/192.168.56.91

  SCAN VIP name: scan2, IP:
  /myrac-scan.localdomain/192.168.56.92

  SCAN VIP name: scan3, IP:
  /myrac-scan.localdomain/192.168.56.93

  Just curious. But think about it, if scan main objective is to simplify the configuration of the client tnsnames file (in this case if additional nodes increase or remove), is not to have a scan in/etc/hosts to achieve this? Just add the below in all clients.

  However, I agree that he will lose the SCAN (IP) load balancing and if the individual scan listener down, the whole cluster is not achievable.

  I probably rephrased it wrong in my previous responses, but simplifying the client configuration is only one of the objectives. Having the ability to load balance through DNS connections would be another of his goals. You have answered your question in your second sentence :). In the case of having 1 SCAN IP in/etc/hosts, in your cas.91, if this SCAN listener becomes congested or unavailable, all clients configured to use this IP SCAN will not be able to join the cluster.

• How to get Firefox to v28-v29?

  I just want a simple (or as simple as possible), a progressive response to what I need to do to fully restore Firefox exactly as it was before this latest update.

  Each thread that I have watched begins with a reply from a moderator writes that we must give the new version a chance because [the list of patterns], then all useful responses that really answer the question are changed in order to remove any useful information and the thread is closed. It is practically the opposite of 'support' and certainly no way to treat a base of very loyal and enthusiastic users who are just trying to find a way to continue to use Firefox in the way that they are more productive.

  Answer before the same useless (some would say insulting and argumentative) responses from other threads: although I do not know this update is wonderful in all kinds of ways, I think the previous version of Firefox is better suited to my needs. It worked perfectly for me so I don't care if support ends; and I am aware of the "dangers" to use an unsupported version.

  I would just add that I feel betrayed that he had no warning that it was going to be such a significant change from the previous version and move forward the user base deserves some kind of warning to review the list of changes before you apply the update, especially when the update contains more than of simple bug fixes.

  So now, please, someone tell me how to completely restore Firefox to v28, including all my custom configurations (not just a theme v28).

  Hello
  Please see:
  Install an older version of Firefox

  We are sorry for any inconvenience caused to you. If you feel strongly about the new changes I suggest you to make comments on https://input.mozilla.org/feedback for people who have decided on changes to see in reality.

  Please keep in mind that Firefox is a work in progress and your feedback is very valuable for us to understand what we can do better!

• update of Firefox not offered for windows 7

  Hello... I love your browser and do it running on all my machines! I currently use on my bench of FreeBSD, my Windows 7 and Windows 8 platforms too. I always make sure to check updates every few days because I know how important keeping connected to internet programs up to date is. It's 19 of Firefox for Windows 7. I was able to update Firefox for Windows 8 version 19.0.1.4805, I was doing some work in Windows 7, but Firefox did not update (it is said its updated). I was wondering if there was a problem or if I received a copy of false from an unknown source (I noticed also Firefox is always version 19 your download Web site). Thank you for your prompt attention to this matter.

  Jeremy Cox

  Thank you for your quick response! who answered my question 100%!

• Since the upgrade to FF9.0, Yahoo Messenger no longer works. Who's going to fix this?

  After the upgrade to 9.0 Yahoo chat messenger is no longer in effect. The tab flashes that someone has sent a message, but there is no window to open it. Also cannot choose a contact to open and start a new chat.

  I filed a few reports with Yahoo - this was their most recent response. My answer to them is that I don't want to download another browser.

  I understand that you can not use the chat feature in Yahoo! Mail.
  I apologize for any inconvenience that this issue arises for you.

  We had reports from that of other customers and our engineering team is already working a resolution now. We intend it to be corrected as soon as possible. The number of the ticket for this issue is 5282454.

  Currently, this problem only occurs in Firefox 9 browser. As one
  workaround you can use another supported browser:

  Maybe you can help fix?

  Hi catselen,

  It is a known problem. You can try to download Firefox beta 10 as it was set here or you can wait a few weeks for the release to become final.

  Hope this helps!