Rest of the BIOS for HP Mini 1020LA password

Similar Questions

• Parameters of the BIOS for Compaq Mini 110 c - what are the default settings

  Hello - when I look in the bios for the compaq mini 110 c, it shows:

  Boot Priority Boot Device 1st - disabled Devixce

  When I hit enter then displays:

  SATAM - WDC WD1600BEVT-60ZCT1 disabled

  As I sat at a white screen with a cursor blinking with only the f9 and f10 options, I'm looking in the bios.  This information is correct?  If this is not the case, how can I change?

  Thank you.

  CAT

  Excellent - it worked!  Thanks for all your help - it starts now.

  CAT

• Mini 110 freezes to the bios for 5 min each time it starts

  Hello. I have a HP Compaq mini 110-1010ER notebook. Not so long ago, everything was fine.  Recently, it began freezing at startup, the display of the menu of the bios screen. After 5 min the screen initial sturtup black with the letter 'Q' and the choice of the bios menu, it starts without any error message and works normally. What could be?

  Solved! In the SD Reader slot, there was no card microSD card adapter. When I got out, the laptop began to load normally. A big thanks to MangKanor

• How to reset the BIOS on HP Mini 2102 password

  I have not used this laptop for awhile because it is too slow.  I just bought a new SSD to use on this laptop.  I tried to start it in the BIOS, but I can't remember what password I used on this computer.  I wonder if there is a way I can reset or remove the BIOS password.  Thank you!

  David.

  Try to remove the battery from the RTC.

  http://h10032.www1.HP.com/CTG/manual/c01988326.PDF

  Page 48 Chapter 4.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• RESET THE BIOS FOR HP MINI 110 CNU9425N5X

  Sorry guys, I gave the wrong code on my first post, the response was great. So can you give me a password based on CNU9425N5X

  Thank you

  Hello

  Please try (any lowe)

  e9lov7q9q4 or e9lov7q9qr (3rd tank is tiny l).

  Kind regards.

• Help I need the Bios pass HP Mini 110 - 1125NR

  Hello, I need help me please I'm going crazy! I need the password for the bios of HP Mini 110 - 1125NR
  And s/n: [number of Series edited by Moderator]

  Hello

  Enter: e9lov3q01z (to be noted that the 3rd character is a lowercase L and the 8th is zero)

  Kind regards

  DP - K

• Try to find the BIOS for Compaq Presario C300 (C350EA) file

  I tried winflash BIOS to a Compaq Presario C300 (C350EA) but it failed.

  The machine still messages, but it can not find a disk hard when you install windows on the CD.

  The HARD test in the BIOS disk still works, like the rest of the BIOS screen.

  Now, I'm trying to Flash the BIOS from disk BACK/external using PHLASH16. EXE, PH1614. EXE and AWDFLASH. EXE.

  In each case, the files of bios provided by HP here do not work:

  http://h10025.www1.HP.com/ewfrf/wc/previousVersions?softwareitem=ob-51160-1&cc=us&DLC=en&LC=en&OS=22...

  Utility in the BIOS but power load hook or warn that the "signature of the platform is not not in the interface.

  Any help with this would be most welcome.

  Thank you very much

  Carlos.

  Hi AxshunJaxun,

  I thank very you much for your detailed and helpful response.

  I had already tried all of those, but your screenshot of a Win7 installation has helped me tremendously.

  You see, I tried to install the original version of Windows Media Center Edition (MCE) 2005, which corresponds to the label of license on the underside of the laptop.

  So after seeing your post I threw a Win7 disc in the drive and tried to install it, just to see how the installation program.

  Not surprisingly, the Win7 installer detects the disc perfectly but report it as being on an advanced interface for AHCI.

  Unfortunately, I don't have an additional license for Win7, so I am forced to persevere with Win MCE.

  So, now I'm at the stage of trying to force the installation of Win MCE program to see the HARD drive by installing the 3rd AHCI driver.

  For the moment, I have the installer of Win MCE see my external floppy drive but I can't find the right drivers for the HARD disk controller. Installing Windows reports that "the txtsetup.oem file is not found.

  I tried to download and run the Intel SATA AHCI Controller driver file to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-39535-1&cc=us&dlc=en&lc=en&os=228&product=3255527&sw_lang= , but it fails with the error 'error Windows N. 5 access is denied. Disk error n. 69 on track 0, head 0 "or"the current image format is not supported by the drive.

  EDIT: I used WinImage to unpack the disk image file and manually wrote the files on a diskette.

  Thanks again for your help, it seems to have worked. Will update again when the installation ends.

  Carlos

• Can not find the latest version of the BIOS for my Satellite Pro L100

  Hello everyone,

  I'm looking at the latest version of the bios for Satellite Pro L100 (PSLA1E).
  I can't find it on the Web from Toshiba site because it is a product at a reduced price.

  The BIOS download page is http://www.toshiba.eu/innovation/download_bios.jsp
  The older models, you can find if you use the option product type > Archive.

  Your Satellite Pro is in the list and latest version of BIOS is WIN 3.00.

  I don't know if there is a problem with your laptop but if everything is working properly and stabile don't change anything.

• Is it possible to update the BIOS for the Satellite A110 (PSAB0) and Windows7?

  Hi all

  I recently installed Windows 7 on Toshiba Satellite A110 (PSAB0).
  The version of the system BIOS is v1.30
  I want to Flash the BIOS for you last version v2.0.
  This version is released in January 2009, before the introduction of Windows 7.

  There are two versions of the BIOS download, one "for Vista only' and one 'OS independent.
  I think I have to go to the operating system independent.
  Link: [update BIOS | http://www.toshiba.nl/innovation/download_driver_details.jsp?service=EN&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 661 & STAS hortMod = 478 & language = 1 = 12 & selOS & selType = 4 & yearupload = & monthupload = & dayupload = & we eDate = null & mode = allMachines & search = & action = search & macId = & country = 24 & selectedLanguage = 12 & type = 4 & page = 1 & ID = 66230 & DISO =-1 & driverLanguage = 42]

  Independent of the OS has warning: + "this Bios is NOT compatible for notebook computers equipped with Windows Vista!" + "

  So here's my question: this BIOS version is compatible with Windows 7?

  Thank you very much!!

  AJ.

  Hello

  I think that this BIOS (v2.0) is not released for Windows 7 and that it has also not been tested with Windows 7. This BIOS has published 21.01.2009 and Windows 7 was released on July 22, 2009. However, on the other hand it s not mentioned that this BIOS is not compatible with Win 7.

  But the fact is that only Windows 7 doesn't is NOT supported on this laptop.

  Windows 7 drivers are not out on Sat A110, but this does not mean that you couldn't install Win 7 on this device. Of course, you can install the Win 7 system, but Toshiba does not provide any Win 7 software for this series.

  Back to BIOS update:
  In your case I would try not to update the BIOS if the laptop works properly.
  Why? Because the update of the BIOS is still a technique sensitive and you could damage it the motherboard if something goes wrong during the update of the BIOS.

• HP Pavilion p6 2466eo: new passport necessary at the start of the BIOS for the Office

  My computer is HP pavilion p6-2466eo.

  High,

  BIOS refuses to boot after a crash HD. The BIOS makes a request of ""power-on-password"which I do not know." Understand that used to be stored on the hard disk, but is no longer available after the failure of HD.

  The motherboard is H-Joshua H61-Μatx.

  On this forum the pins of the BIOS recovery are distinguished in the HP documentation.

  HP - doc shows 6-pin, the real thing is there are 7, room for 8 with 1 missing pins.

  The service doc suggests fidle-around jumpers, but my reality is different and I can't follow this rcommendation

  In short:

  HD-crash and replaced by a new one, but the BIOS require a power-on password that miss me.

  Jumper in HP - doc's recommendation is different from the reality.

  What to do? Thanks for the suggestions

  Hello:

  Please see the link below... Follow the instructions under the jumper settings > clear password settings.

  http://support.HP.com/us-en/product/HP-Pavilion-P6-2400-desktop-PC-series/5330783/model/5382517/document/c03135925/

  Now the written instructions are not complete.

  I rewrote the instructions so that you will be able to clear the BIOS P / w.

  To clear the password BIOS follow these steps:

• Update the BIOS for Satellite U400-10O required

  Hello world

  I have a SATELLITE U400-10 oC (PSU40E-00R00EG3). It is an old product, but once I always love use regularly.

  Recently, I bought a battery for this device upgrade. Unfortunately, it does not recognize the laptop. The work of the battery, but I don't you all information about the charge level. I tried various tricks 'reset' (removing ACPI Microsoft in the list of the drivers installed, running down the battery completely etc..).

  I think the BIOS might be exceeded and I'd like to update. Unfortunately, the Web of Toshiba site does not list updates for him more. Still, someone has access to updates the BIOS for this?

  The BIOS is a Phoenix currently to version 4.70.

  Hello

  N my BIOS of opinion has nothing to do with it. Battery can be replaced, and if you use compatible batteries they should be recognized correctly. Here is the list of all compatible batteries:
  PA3534U-1BAS/BRS
  1BAS/PA3536U-1BRS
  PA3634U-1BAS/BRS
  PA3635U-1BAM/BRM

  Purchased one of these and original Toshiba product (label Toshiba) or a product without a name?

• Where can I find an update of the BIOS for Satellite A100-200 (PSAA8E)

  Hello

  Where can I find an update of the BIOS for this model?
  The BIOS on the download page is from November last year, is there something more recent, or does anyone know of an update that is compatible?

  Thank you

  Ian

  The drivers and BIOS published on the page of Toshiba Europe are always the latest versions available.

  Toshiba page does not provide a different version then the one available is the newest ;)

• Where can I find an update of the BIOS for Satellite A200 - 14 d (PSAEC)

  Hello

  Where can I find an update of the BIOS for this model?
  My bios is 10/23/07 Windows Vista 32bits 1.80 - WIN

  Hello

  Have you checked the page European driver of Toshiba?
  Here you can find all the drivers and BIOS for Satellite A200 - 14 d (PSAEC)

  But I checked the page and 1.8 for Win 32-bit Vista BIOS is still the newest one.

  Looks like you're already up-to-date boyfriend ;)

• Virus in the BIOS for Satellite A660 update?

  Hello

  I downloaded the update to the BIOS for Satellite A660 of and antivirus reports that is a file infected.

  Is the update "Update the BIOS 2.10 - WIN" dated 09/09/2011-> {color: #0000ff} * [link: http://support1.toshiba-tro.de/tedd-files2/0/bios-20110909104312.zip] * {color}

  I understand a {color: #0000FF} _ * [image: http://img97.imageshack.us/img97/6708/biosvirus.png] * _ {color} antivirus information.
  Greetings.
  

  Thanks for the info. Don t use it. I sure that Toshiba will react and remove it from the download page and free version of virus to soon offer m.

  Thanks again.

• Satellite A200-1DN - the update of the BIOS for Windows 7

  I am running 32-bit Windows 7 on a Satellite A200 1DN. I had battery problems (plugged in, does not support) and I understand that I have to update my BIOS. However I can't find an update of the BIOS for Windows 7, only Vista and XP.

  Can anyone help? I should update with the BIOS in Vista? Are there other options to fix this battery? I already tried an ATX reset and uninstall method battery Microsoft ACPI compatible controls.

  Any advice would be much appreciated.

  Thank you
  Ian

  Theoretically, you can install Windows Vista to update Bios and return Win 7, then. Before you do, try this:

  Unplug the computer from the power adapter and turn it on. Let the computer battery power until the computer turns off
  Remove the battery. Using a soft cloth, wipe the battery packs connectors and AC adapters.
  Reinsert the battery and plug it into the power adapter

  > I tried an ATX reset and uninstall method battery Microsoft ACPI compatible controls.

  also, have you had the same problem before installing Win 7?