Restart, and then select the appropriate emergency start device

Similar Questions

• I want to get rid of the Bing screen, but there is no "menu at the top of the Firefox window" for me "Select tools and then select the Add-ons menu item.

  I suddenly have a 'Bing' screen when I connect on Firefox - and I want to get rid of it. The support section of Firefox says
  1 "in the menu at the top of the Firefox window, seledt tools, and then select the Add-ons menu item." - but I don't see any 'menu item' tools, or much less modules.
  2. "in the window modules, click the Extensions Panel"- but how to find the Modules window?
  3. find the Bing and extended support to search toolbar in the list and then click on disable for each of them. ' - but what and where exactly is - this?

  At the top of the screen is only an icon of Yahoo to the left and to the right of it, a search box, 'Web search', 'My Apps,' Yellow Pages,""Weather","Updates"and"Skype ". to the right of the people, there is a green cross saying "add more applications. to your toolbar"and to the right of this one kind of gear shift looking icon saying"toolbar settings ".
  So, in short, how can I get rid of the Bing screen and how to access these tools?
  Thank you.

  Versions of Firefox 3.6 + have a feature to allow the user to hide the Menu bar.

  Press the Alt key to temporarily show the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
  
  The F10 can also be used on most PCs to temporarily reveal the menu bar.

  https://support.Mozilla.com/en-us/KB/menu+bar+is+missing

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• JS CS4: Create the variable for the active layer, and then select the layer at the end of a script

  I'm come white with the verbiage and spin my wheels with OMV guide and script.

  var myOriginalLayer = app.activeDocument.layers.item (0);
  Alert (myOriginalLayer)

  Returns "layer object" and not the name of the layer.

  var myOriginalLayer = app.activeDocument.layers.lastItem () .name;

  Returns the name of the layer I want but not by choice.

  I am challenged on how to select the layer.

  Hi John,.

  The difference lies in that the [Object Layer] is the real object, and the 'name' is a property - like color.

  You can use one of these two approaches:

  var myOriginalLayer = app.activeDocument.layers.item (0);
  Alert (myOriginalLayer.Name);

  hosts the original layer object, and you can see the name if necessary :-)

  For re - select the layer, use

  app.activeDocument.activeLayer = myOriginalLayer;

  You can also select name goes like

  var myOriginalLayerNAME = app.activeDocument.layers.lastItem () .name;

  ...

  app.activeDocument.activeLayer = app.activeDocument.layers.item (myOriginalLayerNAME);

  I also noted the following:

  app.activeDocument.layers.item (0) points to the first layer of your document; not the 'active'. Similarly, app.activeDocument.layers.lastItem () points only to the very last. I don't know if the order of the activeDocument.layers array mimicks the order as shown in the tags palette, but I hope for it :-)

  To get/set the active layer, use app.activeDocument.activeLayer as shown above.

• Fire Fox is running slow internet everywhere on advice how fix said click the menu, and then select the help option there is no help option in the menu

  Surely someone must have tried this before implementing a solution that cannot possibly work

  Hello Rusty8899, you can find help here:

• Change the orientation of the mouse. Click the apple icon, and then select check box on the left. However, this box is covered by a video on the use of the mouse. How to remove the video?

  Change the orientation of the mouse.  Click the apple icon. System Preferences; OK to this point; the area to select 'Left hand' is covered by a video on the use of mouse clicks. How can I remove the video (s) so I can't select 'Left hand' in the box?

  System Preferences > mouse, and then select the tab more moves.

  Then on the left, select: slide between pages

  Click scroll left or right with one finger , and then make your choice.

  You cannot delete the video. This is a demonstration.

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer. If I select 'YES', the system restarts and I get the same message.

  Original title: "RESTART YOUR COMPUTER IS REQUIRED" MESSAGE LOOP

  Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer.  If I select 'YES', the system restarts and I get the same message.  Always shut up if I keep you select 'YES '.  I can work around the problem by choosing 'NO '.  How can I avoid that this message that appears constantly when I start the computer?

  http://forums.techarena.in/Windows-Update/1095335.htm

  read the above and follow the tips on adobe updater and maybe this will help.

  If this is not the case after return and include information about your machine, svc pk and IE #.

• I connect my Canon camera, wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera wizard.

  original title:wiaacmgr.exe

  I found a lot on the Internet about wiaacngr.exe not opening not or refuses to recognize the camera.  My problem is almost the opposite!   Whenever I connect my Canon camera, by USB, my current laptop (Windows XP Pro SP3 of v5), wiaacngr.exe opens a window asking me to select the program to start.  But it offers only two options: M/S Office Word and scanner and camera assistant, neither of which I want to use.  If I close the window...  Not much, but it's a nuisance.  I would be happy if she has proposed to launch work stations.  I then click on the box "Make this every time" and will never see the window.  Otherwise, I'd be happy to remove the program completely.  Can someone tell me how to achieve one of these?  S ' Please!
  Jim

  Hello

  I suggest you to return the item and check if it helps:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  See also:

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

• Start threading with another processID, and then close the application

  Hello

  It is a delicate issue, so maybe something for all wizards among us

  OS 4.6.0 9000 "BOLD", put to the test through Wifi and 3 G networks

  As far as my knowledge about operating systems goes, it is not possible to start a process of your own application, close the application and then update the application. This is because the process began has the processID of the app as a parentID. So long as the process is running the application is running and access its files of cod.

  I'm trying to get an update mechanism in my application. At the moment I am citing a new private and out of my application (via the call onClose() on all the screens on the stack or the System.exit (0)) after the start of the thread of displayPage() browsersessions. I know, that probably would never work, but it is the simplest approach and worth a try. With the two variants to close the parent application ota download starts but hangs at about 10%. I guess that's because then a cod of the application file is tried to be crushed. The following threads and knowledge previously mentioned on OSs, it would be the point where the application must be fully completed.

  Now, even after all ways to close an app I know... even if I try to reinstall on OTA via the external browser, download hangs at 10% (App closed before!). Seems I have the same problem as this guy, but calling onClose on all screens does not solve him.

  Screw on the problems to kill a bb - app

  After the crash, the machine stops and restarts. Unless I start the app again once I'm able to reinstall via OTA Download in the external browser. This brings me to some open handles that could be left by my application close. Is it possible to really put an end to the application without the remains? In the following article, I read that there is some app cleaner memory running in the background. A cleaning of my application data can be requested manually when closing?

  Thread mentioning the cleaner memory application

  Article on cleaning memory

  Another approach, that I thought would write a separat Updater app. It would be installed via OTA on the original app (does not affect the files of applications). Then the application closes, the update must be run manually by the user. It will offer an opening to private download ota of the new app problem is still that the download would crash unless the former PPP has been terminated correctly before.

  Any ideas on this subject?

  Rob has soon

  Thanks Jerome,.

  He will give a try.

  Regarding the problem of update: call the external browser works fine, the only thing to be wary of is not to close the app but just ask the application to get to bottom:

  synchronized(UiApplication.getEventLock()) {
      synchronized (PersistentStore.getSynchObject()) {
          UiApplication.getUiApplication().requestBackground();
      }
  }
  

  from the download ota after that works almost perfectly (browser cache needs to be cleared before, cod size is 650 kb).

  Regarding the intelligent programming, I found this:

  Article on installing and updating applications programmatically

• When I click on a link in a new tab is no longer open in Firefox. Now, I have to copy the link, manually open a tab and then paste the link. Simply, this started happening a few days ago and I haven't changed anything in my settings. Can anyone help?

  When I click on a link in a new tab is no longer open in Firefox. Now, I have to copy the link, manually open a tab and then paste the link. Simply, this started happening a few days ago and I haven't changed anything in my settings. Can anyone help? Thank you

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thank you

  Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance

  Just a thought...

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button / OK.

• Uncheck show desktop icons can I him repeat these steps, and then select Show the desktop icons are the same icons that I had before reappearing?

  If a right click the office click on view, then uncheck show desktop icons and restart or turn off and turn on my computer can I repeat these steps, and then show the desktop icons check will be the same icons that I had before reappearing!

  Yes. This control simply allows you to show or hide. It does not change the contents of the desktop (C:\Users\\Desktop) user-defined folder. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• In Windows XP, I could choose a file (or files), then go to Edit, and then invert the selection. How do I do that in Windows 7?

  Original title: invert the selection

  In Windows XP, I could choose a file (or files), then go to Edit, and then invert the selection.  How do I do that in Windows 7?

  I think Alt-E-I is also the shortcut for this feature.

• I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  Hello

  This link might help: changing the language setting of your Cloud Creative applications

  Kind regards

  Sheena