I connect my Canon camera, wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera wizard.
original title:wiaacmgr.exe
I found a lot on the Internet about wiaacngr.exe not opening not or refuses to recognize the camera. My problem is almost the opposite! Whenever I connect my Canon camera, by USB, my current laptop (Windows XP Pro SP3 of v5), wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera assistant, neither of which I want to use. If I close the window... Not much, but it's a nuisance. I would be happy if she has proposed to launch work stations. I then click on the box "Make this every time" and will never see the window. Otherwise, I'd be happy to remove the program completely. Can someone tell me how to achieve one of these? S ' Please!
Jim
Hello
I suggest you to return the item and check if it helps:
Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default
See also:
Change default programs using Set Program Access and computer defaults
Tags: Windows
Similar Questions
-
I installed the app in my applications folder and everything works perfectly. But normally, after you have installed a browser, the installation disk icon that appears on your desktop can be ejected or removed without. Mine is back...
Make sure that Firefox is installed correctly.
Open the DMG file and drag the Firefox program in the folder of the application on your hard drive.
You should not double-click the Firefox application to run from the disk image and drag it out of the DMG file instead. -
original title: 'Open with' problem...
My office was attacked by malware. I have run virus scan and all updates that were available. When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.". There are recommended programs and other programs, but I'm fairly certain that none of them are correct. Can anyone help direct me in the right direction to solving this problem? Every program I try to open, translates into an opening by asking the same question, but the file name changes to whatever program I am trying to the window. Thanks in advance for any help.
Hello
Just in case there are persistent pieces of malware here is the method of complete elimination.
.exe question difficulty in the next message.Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task managerProcess tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.Right-click on it and rename it to ZZMbam.COM (or something different than now) and
Double-click it, and then run it like this. You can rename it back later. Do the same with
other programs according to the needs. Use this method to others as needed - NOT assume all
a program deletes all or that it is no other malicious software.---------------------------------------------------
2.
Another method is to use them:Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxUnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtmlAV.exe
==============================================
The AV.exe malware goes by many names:
XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
antivirus, scams for you force to pay for them while they have no advantage at all.How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
Run them in regular Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
Use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
I tried to migrate iPhoto pictures, after the upgrade to OS10. Was a success. However, a week later, he said now "the library could not be opened. "Photos has attempted to repair the library" photo library ", but is unable to open it. "Given the size of my libraries, I have every living on external drives, so I don't know if it's part of the problem, but it's strange because it worked last week. Ideas?
Given the size of my libraries, I have every living on external drives, so I don't know if it's part of the problem, but it's strange because it worked last week. Ideas?
How are your external drives connected? Are mounted locally or network drives?
And what is the file system on the external hard drive?
You open the library from another user or another Mac account?
You run applications cleaning to save space?
-
Original title: open Firefox and explore
When I leave early to Mozilla Firefox or Explorer, I get a menu of recommended programs and asked me to choose the program with which to open the file. When I do, I get a security warning asking if I really want to do. If I check "Run", I get redirected to the previous list, and I find myself in a circle without end. It does not matter what choice to make. Used to be that I went from starting Firefox directly. I can get in if I have Firefox right click and choose to run the file as an administrator and then give permission to open the program. How can I cut these two additional and direct access, that I used to enjoy. I run Vista. The same thing happens if I have to explore. Would be grateful for the help.
Hello
1 during how long have you had the problem?
2. don't you make changes to your computer before the problem?I suggest that you follow the steps below and check if the problem persists.
Method 1:When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another programMethod 2:Step 1:Make SFC scan and check if this is related to missing or damaged system files.Step 2:After the SFC scan, set the file association and check.Method 3:
Test the issue in a new user account .See also: -
Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record. Internet works fine. I have Adobe account.
I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start. I get the same message that I should connect to the internet and connect. It seems impossible after 3 hours. Spent an hour chatting with the support of the India.
Also remove the cookie file and reg Lightroom then enter the serial number and check.
Windows:
Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.
Type below command and press the enter"" key.
programdata %
It will open the ProgramData folder. inside locate Adobe folder.
Go to Adobe > Lightroom.
Open Lightroom and delete all the files inside,
Then run LR 6 and enter the serial number,
Mac:
(1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
(2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')~/Library
It will open the folder of the user's library.
(3) then navigate to Application Support > Adobe > Lightroom.
Open Lightroom and delete all the files inside,
Then run LR 6 and enter the serial number,
-
I get reimage opening new windows in safari instead of the links I clicked. I tried the force of suggestion smoking etc and uninstall without success. It seems very little help on this in the normal search engines. Any ideas?
On the one hand, you cannot uninstall Safari. It comes as part of the operating system. So, I don't know what you've done or what you think you did, but this is not that. Could you explain more by what you mean with "I get reimage opening in a new window? You can post a screenshot of what happens?
-
Whenever I try to open or run all I get - choose the program you want to use to open this file and its default Adobe Acrobat and he always answers this file type is not supported. I can't open anything on my desktop, tried to reinstall Java, and even in my computer it asks me to choose a program to open it. Help! I don't know what is happening!
* original title - try to refresh, to run or install anything whatsoever, and it will not open executable files.*
Hi LisaPisani,
(1) did you the latest changes on the computer?
(2) when was the last time it was working fine?
Method 1
See the Microsoft article below and try the steps mentioned, check if it helps.
How to change or choose the program that starts when you double-click a file in Windows XP
http://support.Microsoft.com/kb/307859
Method 2
If the previous step fails then I would suggest that you perform the system restore point when it worked very well and check if it helps.
How to restore Windows XP to a previous state
-
Original title: Dial-up connection
Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect," even if I'm already connected to the Internet... How can I get rid of the popup window? All my updates are installed.
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?Search for the issue in the clean boot state.
Put your boot system helps determine if third-party applications or startup items are causing the problem.Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135 -
The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.
I get following error when I try to open the computer management in windows 7, the error is as follows.
The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.
Where can I find this dll file and help me to download and install.
I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.
Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
Package redistributable Visual C++ 2005 (X 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
Visual C++ 2005 (x 64) redistributable package manager
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=enPackage redistributable Microsoft Visual C++ 2008 (x 86)
Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=enPackage redistributable Microsoft Visual C++ 2010 (x 86)
http://www.Microsoft.com/download/en/details.aspx?ID=5555Package redistributable Microsoft Visual C++ 2010 (x 64)
http://www.Microsoft.com/download/en/details.aspx?ID=14632Thank you
Marilyn
-
I can't open the InDesign program, which I have been using now for over 18 months... He starts to open then crashes, I uninstalled/re-installed the program and always without success.
Hi all
A hotfix is now available for licensing.
Please click on the link below and follow the steps.
Easy steps to follow and should help you to solve the problem.
https://helpx.Adobe.com/InDesign/KB/crash_on_launch.html
Thanks and greetings
Kaushik Afonso
-
It is no longer a row of icons at the bottom right, and asked me to choose a program to use to open files
Hello and welcome to Microsoft Answers. It seems that your computer is infected with malware. The first thing you need to do is re - associate your executable files with applications.
First
Click Start > run > type cmd in the Run dialog box, and then press ok. On the line of command prompt type "assoc.exe = exefile" without the quotes. If you are unable to open the applications follow the second below.Second
Right click on start > search. Type rundll32.exe in the field of the files to be searched. Choose to search for your main drive (usually C). Select the search hidden files and folder advanced features. Click on the search button to start the search. In the results list, find the associated rundll32 file C:\WINDOWS\ServicePackFiles\i386. Right-click on rundll32 to the left of the directory above and choose 'open file location '. The rundll32.exe file should be highlighted when the folder opens. Right-click on the file and choose copy. Then, in the search results list, right-click on rundll32 which corresponds to C\Windows\system32\rundll32.exe and choose "open file location". Again the file should be highlighted. Right-click on the file and choose Remove. Right click again in a free space in the folder and choose Paste. If this does not resolve your problem, you will need to get a windows OS disk and extract the file from there.
Once this problem is solved, you will need to perform several anti-malware analysis. You should start with Malwarebytes. Make sure that you update the parser before the scan.
-
EHP.exe has stopped working under windows. custody arise and asks him to close the program.
Microsoft Windows
EHP.exe stopped working.a problem caused the blocking of the programme of work correctly.windows closes the program.
How to solve this.
Thank you
It seems to me be Malware or a left during the start-up stilll input there.
In addition to using an anti-virus, as Malware/spyware scan:
http://www.Malwarebytes.org/MBAM.php
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight...
How to use Malwarebytes once it is installed and updated:
1. open Malwarebytes > click the update tab at the top > get the latest updates.
2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer
3 MBAM will now start to scan your computer for malware. This process can take some time.
4. when the scan is complete, a message box will appear
5. you must click on the OK button to close the message box and continue the process of Malwareremoval.
6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .
7. a screen showing all of the malware displayed the program that is
8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.
9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.
10. you can now exit the MBAM program.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If after scanning, you still have problems with it, use the program below to remove the boot:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
See you soon.
Mick Murphy - Microsoft partner
-
All my desktop icons are white and when I try to open it asks me to choose the program to open with
Mr President I integerated disk magic software in other files, so all the desktop icons become this symbol (magic disc), I was shocked, and remove the software, and then all of a sudden all my desktop icons became white, when I tried to open the file screening choose program to open the with.i don't know what to do.i tried to restore my computer.some error is to stop , the recovery.so please please say all solutions without having to reinstall my os because I have so many files and I do not have any device to backup.so please say solutions
Original title: problem on my opening program
Hello
You can check out the link below which will automatically fix file associations.
When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
http://support.Microsoft.com/kb/950505 -
Java.exe to java 7 without closing after closing the app forms started in a tab
Hello world
We use 11 GR 2 patch 1 and java 7.25 on the client w / IE 9. Our application is run in separateframe mode.
Our question is if we open our application url in a browser window (we use IE) with only the first tab opened, when we leave our application (using the normal process of exit_form), the java.exe process is stopped. However, if you open a tab in Internet Explorer, in the 2nd tab, if you open and close the application, the java.exe process crashes then there forever even after the browser has been closed.
If we open our application using Java 6 instead, close the browser should get rid of the java.exe process in the scenario of our application in the 2nd tab of the browser.
Anyone who has experienced this problem? We use the close.html called from the trigger after form in our application to close the browser to anchor window when you exit the application. It is the same code that we used for a while, there may be a better version out there that will solve this problem? Here's the code for our current version:
< html >
< body onload = "closeit ()" >
< script >
function closeit()
{
win = top;
Win.opener = top;
Win.Close ();
}< /script >
< / body >
< / html >Thank you
Nathan
In the basejpi.htm, there is the applet parameter applet_stop_timeout , which is set by default to 500 or something. Try increasing it (maximum is 3000). The parameter defines basically the time the applet needs to gracefully destroy once the browser is closed. I guess if the forms applet does not have time to destroy itself with elegance, it blocks causes the java process is not able to close.
see you soon
Maybe you are looking for
-
When I try to update my maps in GARMIN access is denied to a required site. I can't update access cards
-
I had to reload my o/s on my Tecra M1 caused by a virus. My wireless drivers are missing, where can I download it from? I tried the download page on here, but no luck.Thanks for any help. Steve
-
my pictures are hidden, how to recover
Hi when I click on my picture folder tells u the content he said then that the objects are hidden. How to recover. I use Windows XP Home Edition Thank you
-
Connected to the network but no Internet
I recently networked a former model from Dell and HP new mother, running windows 7. The dell has XP. Both computers are hard connected to the router with a connection to a cable modem. I have the network connection, the Dell but IE and Mozilla, bo
-
Musicmatch Jukebox is compatible with Windows 7?
MusicMatch jukebox You can run musicmatch jukebox on windows 7