Restart computer suddenly (at time of high and low), no BSOD?

This has happened quite a bit recently.

I was wondering if anyone has an idea as to what is causing that?

(Dxdiag if necessary)

------------------
Information System
------------------
Operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.141211) - 1742
Language: English (regional setting: English)
System manufacturer: Micro-Star International Co., Ltd.
System model: GX780R, GT780R, GT780DXR, GT783R
BIOS: MSI GT780DXR E1761IMS Ver: 3.0: 18/11/2011-computer laptop MSI
Processor: Intel Core i7-2670QM CPU @ 2.20 GHz (8 CPUs), ~2.2GHz
Memory: RAM 16384MB
Available OS memory: 16362MB RAM
Page file: 6169MB used, 26551 MB of available space
Windows Dir: C:\windows
DirectX version: DirectX 11
DX setup parameters: not found
DPI setting: Using System DPI
System DPI setting: 120 DPI (125%)
DWM DPI Scaling: unknown
DxDiag Version: 6.01.7601.17514 32 bit Unicode

---------------
Display devices
---------------
Card name: NVIDIA GeForce GTX 570 M
Manufacturer: NVIDIA
Track type: GeForce GTX 570 M
DAC type: Integrated RAMDAC
Memory display: 4048 MB
Dedicated memory: 1488 MB
Shared memory: 2559 MB
Current mode: 1920 x 1080 (32 bit) (60 Hz)
Name of the monitor: generic PnP monitor

What surfaces does not have the rest of the laptop on? You can buy a cooler stand to help with good ventilation under the computer.

Removal of the dust bunnies should reduce the noise that makes your computer. It can also reduce overheating, which can lead to unexpected stops.

http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=279891

Tags: Windows

Similar Questions

  • Control the time times of high and low of trains of pulses in C++

    Dear team of support of National Instruments,

    Here's what I have so far:

    I was able to generate the number of pulses (a pulse = a rising edge and front descending one) that the user has indicated via the GUI I created in Visual C++ 2008.

    I use DAQmx 8.6.

    I use the DigitalSingleChanWriter (hopefully, that's what it's called).

    I use for the synchronization of the sample, on request.  I tried to use all other types of calendar but I always get a DAQException run the error that says I can use only OnDemand calendar.

    OK, so here's the problem:

    I have a USB-6008-6009 card connected to an oscilloscope.  I know that the connection is correct, otherwise nothing would appear.  However, if I send say... 6 impulses, the delay between the first rising edge and the first falling edge is dramatically different and then the second and the third.  If I return my samples, I get an assortment of new and totally random times.  So finally, my question is "Is there a way to control the time of a great time and a bit of time?"

    I use a Compaq 2003 lap top, what is worthy of the rubbish heap.  I'm not to blame on this right away as problems that will not solve the problem at hand.  Although I understand if it's actually the problem for random times, but I would still have no way to control the time themselves.

    I hope that I don't have drug it too long, but I decided that distribute information on would be better then just a few tid bits.

    Thank you for support, that you can offer,

    Daniel

    OK, so I just returned from the lab, and this is what I got:

    I was able to control the time at the time of the high and low by using the "WriteSingleSamplePort" of the DigitalSingleChanWriter method.

    I put it in a loop that repeated many times that the user wanted impulses.

    At the beginning of the loop, I used a delay function that I wrote and delayed for a time given and then a pulse with a value of 255 and then delayed again and a pulse with a value of 0. And then restarted the loop.

    In the end, it works.

    Of course, I have another question.  I kept reducing the amount of time between two pulses (1 s, .5s, .2us and so on).  However, once I have diminished the time of secondes.01 or a millisecond, the pulses on the arrested oscilliscope becomes smaller.  It seems that past 1 millisecond Board USB-6008/6009 is unable to deal with the exigencies of the moment.  Or else the computer trash part on that I cannot deal with the exigencies of the moment.  But I believe that the Council is not at fault because it was designed for this exact sort of thing, could you tell me if there is no limitation to the Commission which prevent production of pulses in or within a period of 1 millisecond.  Thank you very much.

    Thanks for all the help,

    Daniel

    P.S. I'll stop you buggin with big messages that I promise you.

    P.P.S.  If someone wants to see my source code for their own project, I'd be more than willing to share.  Please email me or leave a message here.

  • How do I output up to 8 high and low?

    Hello

    I'm still new to Labview, and I can't seem to find a way to do something fairly simple.

    I have a device that has 8 entries, and each entry is "lit" by providing a high signal (5V).  I would like to use Labview to provide that these high and low signals to these 8 output pins.  An additional intracacy is that each channel will have to be activated or deactivated by pressing a button of Labview.  What commands/functions labview I should use to provide this feature?  Are there related examples in Labview or online?  Thank you very much.

    I use a NI 9401 to provide these 8 output channels.  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/208809

    John

    You can search for examples on how to produce digital signals.  Go to help - find examples and numeric type and get labeled examples "write dig Chan".  There is an example that will run on the 9401.  Then, you can adapt it for your use.

  • Convert a single number to a hexadecimal string of 32-bit and exchange the high and low bytes

    I need to convert a number single precision floating decimal to hexadecimal format of 32 bits, share the high and low bytes and that convert a hexadecimal string.  I tried to use the 'Word of Swap' function but it seems to have no effect on the unique number.

    Then

    A single decimal number of entry: 100

    Convert 32 bit hexadecimal string with the low byte first: 0000 42 8

    Anyone have any ideas?

    Thank you

    Slightly lighter, try to cast U32 and exchange words. Same difference.

    (apparently, exchanging words is a NOOP for SGL, but still accepts SGL without constraint. Interesting...)

  • What is the difference between ram high and low density?

    I have an ibm x 3455 7984. high density RAM will it work? If so, it will affect the speed for virtual machines?

    Hello

    If your system is designed to accept briefs DDR (Double Data Rate) DIMM 184pin (usually for desktop computers) or (usually laptops) SODIMM 200pin built for your system to recognize fully the capacity of 1 GB per slot of memory, you must use "Low Density - 64Mx8 config" module of 1 GB. If you use ' high-density - 128Mx4 config' 1 GB module, your PC can only recognize that it is HALF the size to 512 MB or most of the time it won't work.

    In summary: -.

    • The LOW DENSITY modules have 100% compatibility with all systems and all chipsets as it is entirely due to the JEDEC guidelines.
    • HIGH DENSITY modules only have 10% of compatibility and are VERY RIVER because it breaks any guidance Council JEDEC (Joint Electron devices Engineering)

    I also suggest you to contact the IBM support center and check.

    http://www-947.IBM.com/support/entry/portal/overview/software/WebSphere/WebSphere_Application_Server?lnk=mhsd00

    http://www.IBM.com/us/en/

  • Limit high and low AI in DAQmx

    What is the way easiest to measure an analogy of entry line in DAQmx while placing a threshold up and down for the input and output a Boolean value if the value is not within the limits?

    You need to do a comparison of the table read you and see if the value of MAX exceeds your limit. This will generate a Boolean result. The DAQmx Read by itself does not do anything except the signal s cut if the signal exceeds the range that you set.

  • How can I leave an inch of 1/2 for high and low resident only?

    Hello

    I'm a bit new with Illustrator, but I created a picture for a contest. It should be 11 "and 22" wide. I have already created the chart, but later, I got the score I have to leave one inch half-space to the top and bottom only. What is the best way to do it without compromising the graphics?

    Thank you very much!

    a little advice

    Go to the window-> Transfrom

    in the height field, make sure that the reference Point is in the middle and Type:-1

    where-1 decrease the height of 1/2 inch of the top and bottom

    See the image below,

    hope this will help.

  • To get high and low number in a string

    Hello

    I have the following

    < cfset question = "1,5,8,11,22,76,6,143,147" >

    How can I get the number maximum and minimum of this string?

    Thanking you in advance for your help!

    Concerning

    Delon

    Use the very aptly named ListToArray() function... and without a doubt to bookmark the documentation online ;-)  The functions of the display of the categories is invaluable.

    http://livedocs.Adobe.com/ColdFusion/8/functions-pt0_13.html

  • Bad high and low value with the varchar2 data type

    Hello

    It is an application on e - biz on database 9205, with inventory module.

    In one of the mtl_txn_request_headers of the table, the data for the number of application type is varchar2 (30). When I checked the low_value & high_value in dab_tab_columns, I see that the low_value is 100001 (6 digits) and high_value is 99999 (5 digits).

    I used the utl_raw.cast_to_varchar2 (low_value) to convert the value.

    In our case, we save a large part of the value in incremental number and some of our query will be in the predicate of the range (between).

    How should I handle this kind of situation and which option do I?

    Appreciate any help. Thank you.

    Accepted this looks like a classic bad-data type problem, but as this picture seems be part of Oracle E-Business Suite the OP should probably talk first Oracle.

  • Internal keyboard and mouse do not randomly respond time forcing me to restart my laptop 15 times until it works again

    1. sometimes this feedback haptic on the mouse is not triggered, leaving me by clicking on the mouse, while feeling against nature - something that is not supposed to happen

    2. after I close my laptop / closing of the lid/Eve (do not turn it off) the keyboard and the mouse literally don't work - it forces me to restart my laptop several times (sometimes around 15, take me 5-10 minutes just to get my laptop to work)

    Additional details:

    -J' tested a USB keyboard and mouse with my laptop and it works perfectly, even when the internal don't - maybe it's a hardware problem?

    -I went to the apple store a few weeks ago and spoke to someone at the "Genius Bar," which really helped at all - he told me I have to restart my laptop every time I open and I should do another user account - although I was skeptical about the logic used to arrive at these "solutions" I tried them anyway , here we are with the same problem - also, I don't have to close my laptop down 15 times every time I want to use, it's ridiculous, and that's why I bought a mac rather than a pc.

    -I'm not running any software/battery intensive programs on my laptop - especially just the word and the Google Chrome, which is not a lot

    -Here is a link to a video I downloaded from google reader showing how ridiculous, it's... https://drive.Google.com/open?ID=0B4oQ4C8NCLcWTWo5aVlrbDE1QmM

    Questions

    -I don't think that a fix is quite likely, but any suggestions are welcome!

    -Can I bring to the apple store and require a replacement? I left two years of care of apple

    This is probably in the wrong category, I apologize in advance - but it is a really weird problem that I don't think has a solution. Nevertheless, thank you for the reading of my rants and seizure of your advice!

    One thing that causes the mouse further trolling, is if your CPU is completely consumed by something. This can be checked in activity monitor CPU (all processes).

    Two other things can keep your Mac to be properly adjusted:

    GPU is suspended. These are cases where the GPU is no longer and can usually be seen in the console log, with symptoms such as GPU hang or WindowServer does not.

    Disk crashes.

    For the rotation of the discs, this can be a sign of imminent death of player.

    For SSDS of spare parts, this can be caused by the accumulation of deleted blocks, used in activating do not trim for your third-party SSD drive.

    -------

    The reason of suggests that you create a new user id is as a check against the clogging of a particular userid with junk that keeps things from being reactive. [a new user id will not have it clutter accumulated, so can react differently. He is not really a solution, it's a diagnosis.]

  • take the digital output USB-6001 always high or low in c

    Hi all

    I am new to the NI DAQ interface. I have a USB-6001 and I am trying to use this device to control some flowchart in C. What I want to do is:

    * set digital output lines with high and low intensity and change their status as needed (in C).

    I tested the device NEITHER Max--> Test panels and found that the device is capable to do that. Then I try to do in C. I have checked hace examples and function I use is one called "DAQmxWriteDigitalU32". I have problem in the understanding of its input parameters. I tried something with my own knowledge, but it does not work as I expected. Here is a test I did:

    data uInt32 = 1;

    Int32 wrote;

    TaskHandle taskHandle = 0;

    DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
    DAQmxErrChk (DAQmxCreateDOChan (taskHandle, "Dev1/port0/line7", "", DAQmx_Val_ChanForAllLines));
    DAQmxErrChk (DAQmxStartTask (taskHandle));
    DAQmxErrChk (DAQmxWriteDigitalU32(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,));

    taskHandle = 0;
    DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
    DAQmxErrChk (DAQmxCreateDOChan (taskHandle, "Dev1/port0/$line0", "", DAQmx_Val_ChanForAllLines));
    DAQmxErrChk (DAQmxStartTask (taskHandle));
    DAQmxErrChk (DAQmxWriteDigitalU32(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,));

    I just want to set ' Dev1/port0/line7' and ' Dev1/port0/$line0"at a high level, but only ' Dev1/port0/$line0' answer me. The second parameter of the DAQmxWriteDigitalU32 function is numSampsPerChan. If I replace (currently 1) with a higher value, such as 100, I see that "Dev1/port0/line7" sends a number of 1 output, then back to 0. So I guess that the problem is just that I understand not all parameters for the DAQmxWriteDigitalU32 function. Is someone can you please tell me how I can set up a line of digital output 1 or 0?

    Thank you!

    Hongkun

    Hello

    I finally find a way to do it! The feature works very well, and my problem was not set the data value to write correctly. It seems that if I want to write a 1 to the port0/line1, I put "data = 2 ^ 1" rather than "data = 1", because by default it is the second bit of the port.» Similarly, "data = 2 ^ 7 ' high level to port0/line7. I find that this setting is surprising when you want to control an individual line. It seems more reasonable when you control the whole port. In any case, is to solve the problem!

    Thanks anyway!

    Hongkun

  • I created an admin password, but when I restart my computer, I can connect without password and I need to create a new admin password each time

    I created an admin password, but when I restart my computer, I can connect without password and I need to create a new admin password each time

    Open a high command prompt, and then type these commands:

    NET user "user %%nom" | more

    (to check when you change changed your password)

    NET user "user %%nom" 123456

    (to change your password to 123456)

    Now, restart Windows and check if the problem persists.

  • MacBook Air suddenly restarted for the first time

    So, today I just internet browsing (Firefox) and using Spotify and my computer to reboot due to a problem. I'm a Mac user forever, and the computer never restarted itself. I sent the diagnostic and data use to Apple, but I don't remember what it was. Now I'm checking Console and I see a panic report related to the kernel. What is going on? It is a software problem? I have a Time Machine backup to the case where.

    My computer is a 2015 Macbook Air running El Capitan 10.11.13

    Hi aliendays,

    I understand that you had a kernel panic on your Mac and are eager to find out what caused it.   Without a little more information since the report of panic or knowing what you found in the Console application, I can't really tell you.  However, I can give you some information here about the kernel panics and some troubleshooting steps to overcome them.  You're already the most important step in keeping your Mac backed up with Time Machine.

    OS x: when your computer spontaneously restarts or displays "your computer restarted because of a problem."

    Take care

  • About every hour, without any warning or action by me, my PC suddenly goes into Shut Down and restart immediately.

    About every hour, without any warning or action by me, my PC suddenly goes into Shut Down and restart immediately.  Everything is as I left it.  But all this takes time.

    original title: How can I stop my PC restarted on every hour.

    still having problems?

  • I have problems with my computer with the time remaining after I reset the clock and made sure it was on the correct time zone and summer time has been check the battery has also been replaced

    and it will not keep the exact time it will keep accelerate at least 5 minutes or more.

    I don't know what else to do about it. You can someone help me?

    I still find myself make too many assumptions.
    First of all, I guess your derivative of clock occurs during the time when the computer is running and not during the period where it is off (or immediately early)?
    Second, I'm assuming that when you run the command "w32tm/Resync" above, the clock made it back to the correct time and no errors were reported?
    Third, you say that your clock drift 5 minutes or more, but you do not tell us how long this gain occurs.  It is two times more win if you wait twice as long to check?  Is the gain gradual or sudden?  Keep he wins or if he stops wins once it arrives before?

    Conditions of default for a computer connected non-member of the field, the time will be updated network-time only at the start and then once a week.  If you are winning too much too quickly, you can adjust how many times your computer asks for time.  Computers in the domain must be more precise and one every hour for a default time synchronization.  You can set your W32tm to that of a computer in the domain to resynchronize your computer more often (SpecialPollInterval).  Here are two articles that describe the clock settings:

    "How to synchronize the time with the time service Windows in Windows XP"
      <>http://support.Microsoft.com/kb/307897 >
    "Time Windows Services tools and settings.
      <>http://TechNet.Microsoft.com/en-us/library/cc773263%28V=WS.10%29.aspx >

    HTH,
    JW

Maybe you are looking for