Internal keyboard and mouse do not randomly respond time forcing me to restart my laptop 15 times until it works again

Similar Questions

• System recovery: keyboard and mouse do not work

  HP 300-1025, Win7x64. Trying to do a restore of system of hard drive or CD, takes 3 to 6 hours to charge Cyber utility, but equipped with standard wireless keyboard and mouse do not work and can not select the option to retrieve!  Tried to use the wired keyboard/mouse but still not recognized. Help!

  Reinstall the RAM chips after contacts with cotton cloth to remove the accumulation of such static recommended by HP TotalCare. System load of Cyberlink, repaired Win7 and back to normal.

• My keyboard and mouse do not work. Can't click or type anything.

  Original title: keyboard and mouse

  Hello, my keyboard and mouse don't work I can get on at the office but can't click on what whatsoever as the two keyboard and mouse do not work I tried the BIOS but still couldn't have tried different keyboards and mice, and they do not work or do not know what to do please help

  Hello Shirley,

  ·         Have you checked if the same keyboard and mouse work on other computers?

  ·         Are these PS/2 or USB devices?

  ·         You did changes to the computer before the show?

  Method 1: Try to connect the keyboard and mouse even to another computer to see if they work.

  Method 2: If they are PS/2 devices, then try to connect to USB devices to check for the issue or vice versa.

  Report of the results.

• Keyboard and mouse do not work when connecting

  I have windows 7 and ubuntu 9.10 "multiboot". He had been working well, until I rebooted. I had just done a WinPE boot drive, and I wanted to test it.

  Now the keyboard and mouse do not work on screen or login in safe mode.

  Help, please

  LKGC?

• Keyboard and mouse do not respond during installation of Windows 7.

  navigation when installing win 7 without the keyboard and mouse

  I installed Windows 7 Home Premium on a new computer with P67 Pro3 motherboard and storage of 128SSD. I don't have the use of the mouse, although the keyboard works. (Good work). This is my first time building my own computer.

  I stood for "I accept...". "in the box before you click"next ".

  The clicking on 'enter' had worked up to this time to move the process forward. Now 'Enter' does not work, I tried a certain 'shortcuts without result. For me to accept the conditions to continue the installation. I checked the "keyboard Short cuts for windows, but I have not found one to solve my problem." There is no cursor on the screen.

  I'll be grateful for any help.

  E-mail address is removed from the privacy *.

  What is a wired or wireless keyboard?

  If it's a USB keyboard, have you tried other USB ports on the system?

  Also, try to boot into your BIOS and change the USB mode to legacy and see if the keyboard resumes.

• Keyboard and mouse do not work on startup.help

  Keyboard and mouse are unresponsive at startup... help

  Hello

  Please write in the Microsoft Community Forums.

  I understand that the mouse and keyboard do not work to start the computer.

  Let me go ahead and help you with the issue.

  It would be more useful, if answering these questions:

  1 have you ever try to use different mouse and keyboard on the computer?

  2. What is the brand and model of the mouse and keyboard?

  3 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem:

  Method 1: Start in Safe Mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If the problem does not persist in safe mode I suggest you perform the clean boot:

  Method 2: run the clean boot:

  Perform a clean boot to determine if any 3rd party service is causing the issue:

  http://support.Microsoft.com/kb/929135

  Note: After you perform troubleshooting steps to clean boot, follow the steps in the link to start the computer to Normal startup mode.

  Method 2:

  Run the fix it and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• Windows 7 - USB keyboard and mouse do not work once Windows starts

  The following happens occasionally:

  The keyboard works perfectly in the BIOS, the post OFFICE and when the Windows 7/64 Ultimate starts (I can tell the [Numlock] led shines). But when you see the Windows login screen, both, USB keyboard, USB mouse and stop working.

  I can say this from the [Numlock] LEDS go off and, mouse and keyboard, does not.

  There is no discernible specific deadline. Even wait minutes does not get the mouse or the keyboard back from work. In this case, the only way to get both mouse and keyboard, back from work is to reset the machine.

  I noticed this strange behavior with several keyboards, mice and different motherboards. So, it doesn't seem to be a problem related to a particular device.

  Independent since I also noticed the following:

  • I am currently using a card mother GIGABYTE Z68XP-UD3-iSSD. If I activate XDR (caching system with the small SSD disk) then Windows 7 starts up very quickly but keyboard and mouse get disabled for about 5 seconds when the login screen appears.
    .
  • During the installation of Windows, the keyboard rarely has not activate during the POST at all.

  I noticed that several people share the same problem. Is this an inherent problem USB HID? Or is there a bug in Windows that should be fixed?

  Hello

  This might be a question of power, where Windows is shutting off the power to your USB ports. Try this:

  Open the Device Manager
  Click on the tree "Universal Serial Bus".
  For each "USB root hub" do the following-
  Right-click on 'USB hub root'
  Select Properties
  Click the power management tab
  Make sure that the box "Allow the computer to turn this device to save power" is NOT checked.

  Try restarting now. If all goes well, that will take care of the issue.

• Microsoft WIRELESS 3000 keyboard and mouse do not work.

  I bought a set with wireless keyboard and mouse and even pretend to be plug-and-play, I couldn't make me work.

  What should I do

  Reference is Microsoft WIRELESS 3000

  Thank you

  Original title: keyboard and wireless mouse

  I'm still using keyboard and mouse cables so I'm not sure, but this help - http://support.microsoft.com/kb/838398/en-us , he mentions "Microsoft Wireless Keyboard 3000" in the list "applies to. At least, it can give you some advice. Also, If your kit is in this list - http://www.microsoft.com/hardware/en-us/downloads#keyboard - it seems that type/etc. Intelli point software is here.

  I hope someone else can "chip" with a response if the foregoing is of no use.

• All my USB ports are disabled; keyboard and mouse do not work, can not navigate to reactivate their?

  After installing Java rebooted my system update, while booting it showed Eroor message 'BootMGR' missing, disabled bymistake USB ports, now my keyboard & mouse not working does not help?

  Hi Abhi SR,

  ·        How do you disabled the USB ports?

  ·        What you did to fix the "BootMGR" error missing?

  If you have disabled the USB ports in the BIOS (Basic Input Output System), you will need to use a PS2 Keyboard and enter the BIOS for their re help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• Keyboard and mouse do not work

  I have a HP Media Center M7100e.  I have just completed a system recovery. After reboot, the screen indicates that I click next to complete the installation.  The mouse and keyboard do not work.  Work on the initial startup of hp screen, but are disabled.

  Please provide a solution.

  Thank you

  Ron

  OK... well., his back to recovery seems to be suspended.

  Here is the HP recovery troubleshooting document:

  http://support.HP.com/us-en/document/bph07144

  In this document are States:

  Recovery takes too long

  If your computer stops responding after using the recovery program, follow these steps:

• Keyboard and Mouse/touchpad not working not not @ simultaneously.

  Earlier tonight while playing Guild Wars 2 I move my PC with the num pad and try to use the mouse to get a better view. The mouse works for about 5 - 1.5secs before locking and I have to release the buttons on the keyboard until the mouse is moved again.

  Now before you ask this same problem occurs when in windows.

  Update to the latest drivers.

  Envy of HP DV7 - 7212nr - no hardware changes.

  FIXED BY me with 3 minutes of google.

  http://en.kioskea.NET/forum/affich-217981-cannot-move-mouse-while-typing

• Keyboard and mouse does not work / computer does not start

  I have a HP Pavilion a6403w that my daughter uses to the school. One day, the computer stopped boot-up.

  I get to the blue screen to choose (F10 = Setup) ect... The only key that seems to work at all is the F-10. If I press it, the computer responds by indicating it's to enter the configuration mode (but only if I press it very shortly after you turn on the machine), but the computer is hang.

  I can't get into safe mode.

  I put the recovery disk and turn on the machine, but nothing.

  I'm at a loss... any help would be great!

  Thank you.

  Stick with the HARD drive. Ask them to send it to you.

• When I start my laptop, I get the screen of my password, however, my keyboard and mouse do not work

  What I have to do. I ahm runing a HDD test through the Setup utility. Error of a hard drive failure. Does this mean that I lost everything on my computer? I need to replace the hard drive?

  HP G60 laptop

  p/n nbo41ua #aba

  You can take it to a repair center and they will return for you. You can also remove the hard drive and connect it to another computer to back up data (recommended for pros).
  
  If you have a high-capacity USB flash drive or external hard drive, you may be able to use the Recovery Manager HP back up files. You must press F11 when the computer is turned on (when you see the HP logo) to enter the Recovery Manager.
  
  There is no guarantee that all or part of your data can be saved from the HARD part is defective drive... Just try to do the first chance you get.