Restart the server - email settings problem

Similar Questions

• Keep the network discovery settings after you restart the Server R2 Standard 2012

  Hi all

  I'm having the following problem. After you restart the server from the network discovery will go off. Therefore, I do not see the server, this can cause problems in the future, so I need to know how to keep on even after network discovery settings server restart.

  Thanks for the help!

  Hi, manual,.

  I suggest you post your query in the following forums to improve assistance in this regard.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Thank you.

• STD R2 Windows Server 2012 was working fine this morning by restarting the server now, we get the error, choose your type of keyboard

  STD R2 Windows Server 2012 was working fine this morning by restarting the server now, we get the error to Choose your type of keyboard

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How do you know hyperthreading enabled or disabled on the Windows 2003 EE server without restarting the server to the BIOS setting

  a small question:

  I have a server with AMD64 (8 CPUs), ~2.3GHz, I want to know if Hyperthrreading is enabled or not, how can I check the setting without restarting the server?
  I am about if HT enabled will allow the server to get better performance?
  Thank you
  -Mulu

  Hello

  The question you posted would be better suited in the TechNet support forum. I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here.

  I have a server to SP1 Windows 2008R2 with .NET Framework 3.5. I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here. Why it does this and how do I upgrade to 4.0 to run programs that require the 4.0?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to load DLLs passwordFilter customized without having to restart the server system.

  Hi all

  I created the CustomPasswordFilter.

  I'm CustomPasswordFilter.dll the System32 folder copy and do a registry entry to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa" update the value "Notification Packages".

  I want to CustomPasswordFilter.dll to work without having to restart the server system.

  Is it possible?

  Concerning

  Ashish

  Hi Ashish,

  You can ask your question in this link for better assitance:

  http://social.msdn.Microsoft.com/forums/en-us/category/windowsdesktopdev

  Also refer to:

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/ms721766 (v = vs. 85) .aspx

  It will be useful.

• How to disable the autostart (application) when restarting the server managed?

  Hi Ppl,

  How to disable the autostart (application) when restarting the server managed?

  I want that some apps do not stay started. In WebSPhere, we have an option to disable auto-start for the application.

  I don't find in weblogic.

  Thank you

  You can force stop the application before you restart the server.

  -Faisal

  http://www.WebLogic-wonders.com

• Composites Show "Status pending" after you restart the server

  Hi team,
  
  I'll call a composite to composite one another, using the WSDL url. Whenever any rebound server happens to be composites of parent are going to pending status and shows error'SOA infrastructure is not loaded for this composite. Error getting entry flow XML < WSDL url goes here > '
  
  I had found this article on the web.
  https://blogs.Oracle.com/AIA/entry/aia_11g_best_practices_for_dec
  Followed the steps. Although my problem persists. Any help would be greatly appreciated.
  
  -Sainaba

  You must reference it the WSDL other composites of MDS instead of use the WSDL url.
  Here are the steps I used to do.
  1. go to the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps" (where C:\Oracle\Middleware is the path where you install your jdeveloper in your machine)
  2. create a 'lib', 'lib\wsdl', 'lib\xsd' files in the previous path
  3. get the HelloWorld composite (example) WSDL url. Put it in the browser and save it locally as ".wsdl" (i.e. HelloWorld.wsdl) in the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps\lib\wsdl".
  4 copy the xsd (say HelloWorld.xsd), which is used in the project HelloWorld to the composite file and copy to the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps\lib\xsd". Make sure you copy all the xsd (s) dependent as well.
  5. open the file previously saved '.wsdl', change the with something like that.
  oramds:/apps/lib/WSDL/HelloWorld.wsdl*.
  6. change the value of the 'schemaLocation' to ' * oramds:/apps/lib/xsd/HelloWorld.xsd* '. "Also, make sure that there is no place where it refers to the URL of the SOA server except to the.
  7. open JDeveloper, create the base of SOA MDS file
  8. navigate to the file composite.xml, where he called for HelloWorld.
  9. double-click on the reference "HelloWorld" and will return the wsdl for the local mds.
  * 10. Go to the source of the composite.xml view and change the location of the binding of the service reference "HelloWorld" BLAH oramds to real composite wsdl URL
  11 deploy the MDS (all files in your lib folder) artifacts at MDS of your server. It is the key step before the composite can be deployed on the server. You can use the ant script or you can use the jdev project to do that (we used the ant script).
  12. now your process can be deployed on the server with any problem. Also, you can repeat as many times as you want and you shouldn't see any problem. (granted, all processes update with this approach to reference the wsdl for reference of mds file)

  * Step 10 is not necessary for everyone. I have maintained a separate of the MDS for different environment version. Thus, each environment has correct endpoint in the MDS. We don't have to use the deployment configuration plan when promoting different environment. If you don't want to do, you need to change the location of the binding in the composite.xml or change as well as the plan of the config.

  HTH
  Hruthayah

  Published by: h_kumari on 27 Sep, 2012 13:43

• Write a Script to restart the server?

  Hi all
  
  Can you please let me know is anyway to write a script to restart the server?
  I need to restart the Essbase Server everyweek.
  
  Thank you
  Alain

  In a script file or command shell

  To stop Essbase
  -Execute a script MaxL to stop the Essbase using below command.
  Change the closed system;

  To restart Essbase
  --Also hit the Essbase agent with startup password.

• Configure the IDRAC settings without having to restart the server

  We have a dell r610. I put an IP address in its idrac last night and ping it, then powered by the server. Today, I can't ping the IP address of the idrac. Put aside from getting to the site, restart the machine and go into the settings of idrac way, is there a way you can access these settings and make changes while the server is in place?

  Hello Roger

  Yes, as long as you have a way to access the system. If you have the operating system remotely, you can install OpenManage Server Administrator. OMSA has an iDRAC section where you can change the IP address of the iDRAC.

  OMSA installation also installs the RACADM tools, so you will be able to execute RACADM commands as well. You can use the RACADM commands to perform all the tasks that you can do so via the GUI, some which are not available in the GUI.

  When you get OMSA is installed, you can check the status of the components of the system. If you see any problems then I would suggest that your first troubleshooting step be restart iDRAC. You can restart the iDRAC independent of the system, there will be no interruption of service to the server when you restart the iDRAC. The command RACADM to restart the iDRAC is:

  racadm racreset

  The command RACADM to iDRAC default configuration is:

  racadm racresetcfg

  Thank you

• How to force refresh user OAM changes without having to restart the server?

  Hi people,
  
  I have an OAM authorization rule based on the ldap user attribute (it is url for ldap query under 'Allow access', rule, that is ldap: / /... with a Cache update is enabled) with the hardcoded value, so that only users with these attributes can access protected resources. My problem is that if I add/remove the attribute via the User Manager console, it does not take effect until I have actually restart the access server. I can, however, locking/unlocking the account of the user through Manager users with immediate effect.
  
  Any help is appreciated.
  Thank you, novel

  Hi Roman,

  There is no problem to run OAM identity and access servers on the same machine, with some ports you choose. I suspect that the problem is that AccessGate the identity of the server is (incorrectly) set up to talk to port 6021 - If Yes, this will be reflected in the identity\AccessServerSDK\oblix\lib\ObAccessClient.xml file and can be corrected by running the configureAccessGate command. There are additional steps to get the automatic hunting at work (in addition to the definition of the parameter doAcessServerFlush) - did you follow the documentation for these?

  Kind regards
  Colin

• How Auto start the Physical Standby Database (when restarting the server)

  Dear All (s)
  
  I configure oracle (10.2.0) dataguard on the production database, a time server restart because of disconnectivity to power, I want restard dataguard when rebooting the server. I'm using Server 2003 32-bit. Guide me how I can run after orders when the server restarts.
  
  SQL > connect/as sysdba
  SQL > bootable media.
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  
  
  Thanks in advance

  I want to run these command each time when the server is restarted.

  Yes, I did not understand that... but what's the problem? You can't schedule a task when the server starts?

• Set up or restart the server vi programmatically?

  I can restart or reconfigure the server of vi of my application?  If I forget something on the tool palette

  just a search name would be nice I want to change the tcp port to listen on.

  Thank you.

  Matt

  Open the Application reference > property > Server > Port.

  I think it is also saved in an ini for built versions.

  Let me know if it works because I have not tried this one.

  Ben

• restart the server because of the Awvusbd64.sys file

  Hello

  When I checked the minidump file to know the cause for the restart of the server, I got under info

  Probably caused by: Awvusbd64.sys (Awvusbd64 + aa47)

  Help, please

  The pilot originally, the Awvusbd64.sys, is the USB driver anywhere.

  A similar error is mentioned in the following link:

  http://forums.Digi.com/support/forum/printthread_thread, 7265_printall, Yes

  If you have a SafeNet dongle it may be a confilct.

• BlackBerry Smartphone email settings problem

  I have 3 addresses on my Torch - a Gmail account that works, a Blackberry that works also, and an email company that used to work. Recently my company changed its web servers, and the new server requires that the username email address complete 'abc@xyz', but I can't put anything other than the 'abc' share is entered automatically during the installation process account and apparently cannot be changed once created.

  I even deleted the account and tried it again to create from scratch, but no luck.

  Is it possible to change this so that I can get my email working again?

  I finally got to the right person at my service provider, and they managed to enter the correct username for me, so my email now works as it should.

  Thanks for your help!