Restart the system when the export in h.264 format
I use:
Premiere Pro CS4 4.10
Media Encoder CS4 4.10
Windows Vista SP1 x 64
When you export in h.264 format and in some cases of mpeg2, rendering gets about halfway done, then the system suddenly reboots. I scanned the hard drives and checked the RAM for errors, both were clean. I have disabled the automatic restart in case of system error, but the system still restarts.
I have not tested all formats, but the export to Microsoft DV seems to work very well. The problem started last Thursday, when I installed a second hard drive. I was able to export h.264 and mpeg2 with no problems before this. However, I removed the new drive, and the problem remains.
This CAN be a power supply going bad, or even a CPU cooler fan problem
Find your hardware monitor in the control panel and check the temperature of the cpu, at rest and during labor
Tags: Premiere
Similar Questions
-
Adobe Premiere CS6 blurry video quality when you export in H.264 format
Hi guys! I want to do a channel on youtube with a saved PC gameplay and I want to do it to the best possible quality. I record with Action Mirillis to my laptop screen rezolution origin which is 1360 x 768 at 60 frames per second in AVI format. I use Adobe Premiere CS6 to render the clip with the H.264 codec to resolution 1360 x 768, cadence 60, square Pixels (1.0), NTSC, high profile, level 5.1 Bitrate encoding format is VBR 2 passes, flow target [Mbps] set at 10 and made maximum use of verified quality but the quality of the export is a little blurry compared to the original screen recording. So my question is what can I change or add to these settings to make my export quality as close to the original as possible? Thank you
1360 x 768 is a common computer display resolution, but is not really a resolution of 'standard' at all. Maybe try export under video 720 p, 1280 x 720. MAX rendering quality need only be verified when you descale the output (which you would be if export to 720 p).
Thank you
Jeff Pulera
Safe Harbor computers
-
The export of paragraph attribute format tag
Hi all
Using structured FM 11 on Windows 7.
I need a way to return paragraph format tags. I know it's easy to assign them to import with ESD, but I don't know how to save the export.
I was hoping that read/write rules can contain something in the sense of:
attribute "paraFormat" is fm property paragraph format tag;
I think it's probably possible with ExtendScript or a custom API, but I would rather these if possible.
Thank you!
TrevorTrevor,
I think you're out of luck with read/write rules. The hypothesis is that logical formatting is the property of ESD and would therefore have no relevance in the XML file. As you claimed it, a client of import/export API could do. An ExtendScript could also do prior to importation, by filling the advance attributes. It's a very simple script, perhaps 20 lines or more.
My FrameSLT plugin could also fill the attributes advance with a Script Assistant node, but is not free as YOU. www.weststreetconsulting.com.
Russ
-
Motion blur issues when you export to apple prores format
Whenever I export my brackets off adobe pro cc as an Apple pro res file any movement in the video are blurred. I can see it in adobe pro cc and the original video file, it not there no problems/blur but when I export and then open it in QuickTime video blurs when there is a movement on moving the point. Any ideas on how I can fix this? What I am doing wrong? I use Apple pro res.
It is the effect of the video interlaced on a computer without deinterlacing selected in the video player settings (I guess that QuickTime in OSX). (You have field first order the higher value). If you intend to edit the file Res Pro, then leave it as is and export the final result in any format is necessary. If this is the end result for playback from the computer, and then set the order of the fields in progressive to remove interlacing. It depends on what you do with the Pro Res file.
-
My first pro sequence won't export in H.264 format... help?
I used the H.264 format and corresponding source with a average bitrate which was to translate, into a file, the size of 1772 MB, instead, the exported video file is corrupt, will not play the and 1 byte. It took 14 hours to export... What was wrong?
If I need to export the video in a format/codec of the difference, what is the video format is the best suggested to HD video + audio which will be later put on a DVD. (I use a mac btw.)
Help, please... Thank you.
How much free space is available on your hard drive?
MtD
-
I want to cancel the export to Adobe PDF format
I want to cancel your subscription to Adobe export in PDF format
Are you facing problems when you use the service Adobe export in PDF format? Please let me know if you are facing problems.
If you wish to cancel your subscription, then here is the link: cancel your subscription or membership. Acrobat, services Cloud of Document PDF
Kind regards
Rahul
-
I was converting pdf to word. I tried to download multiple documents, but the system froze. I closed the Acrobat Reader. Now, I see no export tools more. I even tried to restart the computer. I am currently with my account.
Hi bulldogcl1,
Please perform this cleanup tool to uninstall the reader Download Adobe Reader and Acrobat cleaning - Adobe Labs tool, reboot your system & install the latest Adobe Acrobat Reader DC Acrobat Reader DC Learn & support , sing with your Adobe ID to use the export to service PDF format using Acrobat Reader. Export PDF to Acrobat Reader DC.
You can also use this online https://cloud.acrobat.com/exportpdf service
Let me know if it solves your problem.
Kind regards
Nicos -
Is it possible to export the list items, in a drop-down list when you export data in xml format?
When I Menu forms, manage form data, data on exports, it exports only the first element or the selected item in a drop-down list, and not all items in the list...
Am I missing something?
Nope... .the data are only meant to contain a single value (the one that the user selected).
Paul
-
When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.
Hi silvers.
Please make sure that your graphics card and Lightroom 6 are up-to-date. Latest version of Lightroom is 6.4.
Please check the FAQ and troubleshooting of Adobe Lightroom GPU and disable the use of the GPU in Lightroom.
What is your operating system?
Kind regards
Assani
-
I disconnected and then reconnected in. I clicked on turn off computer on the start menu and restarted the computer. I click on the computer of the off-ramp in the start menu and turns off the computer. I went to a computer point of restoration, and there have been no changes to the computer. I turned off my modem and rebooted. After all that I turned off the power strip and the power to all components. I restarted their in the sequence of the Internet by modem, monitor, CPU. Since that time I have not turned on my speakers to my printer
Create a new profile as a test to see if your profile is at the origin of the problems
See basic troubleshooting: a new profile
If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
-
The parameters of the dock in the system prefs not saved. When I restart the computer, the dock is always located at the same place (bottom) even if I changed before. I have mac os X 11 5 on a mac pro (mid-2010).
In the case where all third party apps, anti virus are installed, remove them. Click go > hold down the option key and don't release > click library > Preferences find com.apple.dock.plist, com.apple.systempreferences.plist and right click on them and move to the trash.
The apple logo reboot and empty the trash.
-
I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?
Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).
Download a new copy of Firefox and save the file to the desktop.
- Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current version of Firefox, if possible.
- Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
- http://KB.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
-
When I clip media player goes full-screen cursor disapeers that I then have to restart the pc to return
Hi KenHannam,
· What version of the operating system is installed on the computer?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Run the windows media player settings Troubleshooter.
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
-
I just want to know why every time I restarted the computer I save then come out of the background is black, I put the f1 not the way I had before why now I guess that something is missing can fix you it for me please
Hi linsugr,
Do you know when this started? The simplest solution because I have no idea of what is happened to cause this is to restore the system to a point BEFORE this problem started (and give it a a few days to be sure). If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html. If the first attempt fails, try to go back a little further and see if you are met with success.
I hope this helps.
Good luck!
-
Windows Update will automatically restart the system
After I install updates to Windows 7, I have to restart my system. The computer is done automatically. How permanently disable this? I don't like that gives Windows me a "choice" to postpone the restart - if I'm away from the machine, then I have no way to stop that and I lost all the data that I had and all the screens I look at one. I'm an adult; I can make my own choices on when I need to restart. Now I get more than 16 hours of work on a project because Microsoft thought that I was a child and could not take decisions for me.
How to disable auto restart continuously after updates?
To update manually instead (this means that you need to remember to update your computer when it is convenient to you - also know that you can not be protected against the latest security threats until you update)-
http://Windows.Microsoft.com/en-AU/Windows7/turn-automatic-updating-on-or-off TaurArian [MVP] 2005-2010 - Update Services
Maybe you are looking for
-
How can I configure Outlook 2010 to overide icloud for calendars and Contacts?
I just bought and mini Ipad 4 and have an iphone 5 s. I decided to Setup place iCloud for my devices. Here's the thing: on my PC, I use Outlook 2010 and I love it for calendars and Contacts. I usually sync it with my iphone via itunes without any p
-
Removal of WAV files after you create AAC version in iTunes
I recently deleted about 5 GB of iTunes WAV files after their conversion to AAC files. I chose to "move to trash" and then empty the trash. When I rebooted my computer, there is about 5 GB of free storage added to my HD but not the Audio storage, whi
-
RND2000 v1 ERROR_INVALID_SECURITY_MODE
Hello, I have a few problems when I try to connect to with my REadyNAS Frontview. When I am logged only ReadyNAS show my the first error: 'ERROR_INVALID_SECURITY_MODE '. This error appear in the newspapers. I can access 'normally', but when I try to
-
Add the 2nd DVD drive to the hp Pavilion 500-214
I just ordered a HP Pavilion 500-214. I want to know if I can add a 2nd DVD disc. And if so, how. Thank you!
-
HP 15-r036tu: activating windows 8.1
Hello I bought HP laptop laptop 15-r036tu last year, with pre-installed windows 8.1. But unfortunately, my hard drive crashed and I lost all my data. I contacted the service center and they have replaced the hard drive with a windows trial version 8.