restoration after the addition of extra hard disk

Similar Questions

• The addition of extra hard disk to a6110uk - can't find a spare cable to connect (not to the power cable)

  My hard drive is almost full and I would like to add an additional hard drive, but I don't know what to do. I can't find where to connect the data cable from circuit board. All thoughts. Thank you.

  Thanls for all the help - I ordered a few parts to see how it goes.

  Best regards, Simon

• Why Google voice is no longer working in Firefox after the addition of extra credit, but not in Safari?

  I use Mac OS 10.10 with 30.0.2 FireFox as my browser. I did call OK On Goggle voice through my G-Mail account. When I ran out of credit. I loaded an extra credit and tried to resume the call. However, I kept get get the following error message "Please download the plugin from voice to make a call. After the link provided leads me in a blind ally. Tried to download a voice plugin and reinstall, but no luck. Tried to close Firefox and reopen, but again no luck. There are no problems when you use Safari as my browser. calls are directed very well.

  Can't understand why it has worked very well and thenstopped after laoding additional credit.

  Hello

  Try to clear your cookies and cache and then try to connect again.

  • History (or

    

    (> History) > clear recent history

  Or:
  "Clear the Cache":

  • Tools (or

    

    > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools (or

    

    > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Make sure you that you allow the plugin on the site as it is maybe somehow it changed.

  In the world:

  • Tools (or

    

    ) > Addons > Plugins

  • For Google Talk Plugin (and Video Renderer), make sure it is set to "Always enable" or "ask at.

  By Site and:

  • On the site, click on the padlock or icon globe to the left of the web address in the address bar and click 'more information '.
    • Or go to: Tools > Page Info
  • Click the "Permissions" tab to see if the plugin is activated on the site.
  • Note: You can also go to the Subject: authorizations page and watch your permissions set for each site

• Can I use the the same validation key that came with my computer is restored after the installation of a hard disc more?

  I bought a refurbished Dell desktop and you want to install a hard drive, can I use the the same validation key that came with my refurbished computer and if now what can I do?

  Original title: renovated

  Yes, you can, but I recommend that you use the following method to pass safely the license to drive bigger hard:

  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

• Autochk stops 30 seconds during startup, after the addition of WD HARD drive for win 7-64 SSD system

  Someone at - it a way to improve this situation of slow start?

  Originally, I had two SSD in my system, and the boot process took 25 sec.

  Then I added a WD 1 TB HARD drive and the boot process has gone in 60 seconds.

  more than 35 seconds.

  When I look at track of startup, Procmon, I see sitting Autochk and wait 30 seconds after

  starting, before you do anything...  The led of the external drive is active on my system during this time...

  Are there problems of communication between the motherboard / HARD drive / Windows /?

  Or Autochk is "it's working" during those 30 seconds with no activity in the tracking log?

  I have now installed a new hard drive and the problem has not reappeared.

  I guess it was simply due to a defective hard drive!

• How to share the root of a hard disk in Win7?

  I am able to share a folder, but cannot share the root of a hard disk. Homegroup is off.  In addition, even if I have the password to 'OFF' I always get invited to do since the XP computers on the network, but not Vista computers. Weird?

  Win7 computers have full access to the C:\ root on Vista and XP in network of machines. But on computers Win7 the C:\ root is blocked. How to open readers for full access. I worked with permissions in fsmgmt.msc without a bit of luck. What is going on. It is not that difficult.

  I have several hardrives with hundreds of directories and must share each individually. There must be a way around this?

  Why everyone does not assume that the implications of the root of a drive of sharing are unknown. I get it. I Armi it. But, Yes... I want to share the root of my records. It's like a big giant microsoft diaclaimer whenever I hear it.

  So I thought to it. Finally!

  OK, that's the problem with Windows 7: I had possession of the disk on the local computer (by default), but this is not enough. I had to give "everyone" the drive to another computer to access property. That means logging in inspired by the network from another machine to Win7 computer, you property as "everyone" and therefore, the authorization to access the drive.

  So, here is what I did. Right-click on the hard drive from windows Explorer. Go to properties. Click Security. Click on change. "Everyone" add to the Group and the permissions you want. Then, go to sharing and share the drive as you normally would. The root of the drive will be accessible on the network.

  I understand it now, but it is poorly explained in documents I've read. I spent hours of research on this and cannot understand why MS makes it so hard to share a drive on a network. Totally absurd.

  I hope this helps others trying to do the same thing. In a small home network, it is very common need to share multiple disks in the root of c:\.

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• This who should I insert for "installation media" interviewed "load the drivers for your hard disks?

  I am trying to repair my installation of Vista Ultimate 64 bit (my system does not boot into Vista at the moment - something wrong).  I am running the recovery by booting from the Vista installation disc in my CD/DVD drive.  When the System Recovery Options screen appears, there is no operating system is displayed.  I wonder to 'load the drivers for your hard disks' by inserting the installation media.  The wizard goes into a mode of navigation, but I have no idea of what he seeks.  The only drive I've delivered with my hard drive, installed months ago and works well so far, doesn't seem to have the type of the file of the search dialog box.  Please help - what is needed to move forward with this repair? Brett Henrichsen

  Download the SATA drivers:

  http://www.ASUS.com/product.aspx?P_ID=ShiLE9XNeuFKwFDC

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• the intelligent control of hard disk detected an imminent failure.

  the intelligent control of hard disk detected an imminent failure. so no los data, please backup the content immediately and run the system diagnostics hard drive test.

  Hard drive 1 (301)

  in the diagnostic system

  All tests are failed...

  Starting the test

  Run in test

  TuneUp System

  I already run the hard drive test before that. but the problem stil occurs. What should I do?

  Yves wrote:
  How can I save the content?

  Hello

  Well, I can now use access HARD drive? In the affirmative, please try this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688870&prodTypeId=0&prodSeriesId=3688868&swLang=13&TaskID=135&swEnvOID=4055

  Otherwise, just replace the HARD drive and use the old HDD as a external HARD drive and you MAY BE able to recover data files from there.

  Good luck.

• the size of my hard disk decreases every time I used tune up utilities

  the size of my hard disk decreases every time I used tune up utilities, then I uninstalled tunup utilities, but on cheking the hard dist, I found that I actually used only 368 168 GB but it demonstrates that only 141 Go free instead of 200 GB, how do I find my free space of hard disk?

  Windows 7 - disk space usage reports

  JDiskReport:
  http://www.jgoodies.com/freeware/JDiskReport/
  Shows the use of the space by folder and also great records list 50.
  This will give you a breakdown of your disk space if you can identify what is using all your disk space.
  (Works in Windows 7, requires that Java is installed: http://www.java.com/en/)

  Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space

  J W Stuart: http://www.pagestart.com

• Re-installing Photoshop CS5 after the death of my hard drive.

  I'm reinstalling Photoshop CS5 after the death of my hard drive. The system is not accepting my product code. What's wrong?

  Thanks for your help. I found my information and I was able to enter the access code. Jeff

  Sent from my Verizon Wireless 4 G LTE smartphone

• I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  Copy the program through a new machine will not work.   Install it using installation files and activate using the serial number assigned to the license.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

• System restore after the recovery running disk

  Hello

  Is there a way to restore my system to previous state after you run recovery disk?

  I forgot to backup my files and apparently lost my data after the recovery running disc. All suggestions will be appreciated. I'm trying to restore my system, but it is not restoration, its shows me only today's date.

  Best regards

  Hello Jazz

  Please slow down. Your ad is quite confusing. You can the prior words includes on two completely different ways.

  (1) previous state as factory settings. If you use recovery media is removed from the entire HARD disk and all data will be lost. There is no way to recover them. To the review no data more.
  (2) previous state by using System Restore tool. It will roll back OS time earlier, but all data will be there. Sorry, but if you have ever used recovery media, it's too late for this option.

• Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

  Hello

  After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

  Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

  How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

  Any help is appreciated.

  Thank you

  Bob

  Hey @llebrez,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

  The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

  If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

  I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• Help to find the driver on the Satellite A200 (PSAE6) HARD disk controller

  Greetings. This text has been written through a translation program, to try to understand :)

  Problem:
  My friend bought a few days back to herself TOSHIBA Satellite A200 (PSAE6) where it has been established operating system Windows Vista Home. He asked me to change OS on Windows XP Pro. With the first problem I have consulted - have deleted Vista, but to set up XP is not possible due to the absence of the HARD disk controller driver in the OS distribution kit. Windows Installer cannot find the HARD drive. I read that it is necessary to load the driver during Setup, press the F6 key. But a problem I can't find the driver in that.

  We have no disk with drivers that should go with a computer and therefore it is necessary to search independently on the Internet. On the Toshiba site to locate the pilot, it was not possible. Then I came to the Intel site and download "RAID/AHCI - Intel® Matrix Storage Manager» After unpacking I got only «infinst_autol.exe» archive

  Question:
  Where can I download this driver (not a "EXE" format) that can be used during the installation of Windows XP?
  PS: a chipset - Intel PM965 Express

  Thank you

  Here:
  http://support.toshiba-tro.de/Tedd-files2/0/stormng-20070827133046.zip

  use the files in the folder "ICH8M_32bit".

  Zingy