Restoration of the changes for the failure of the configuration of the Windows features

Similar Questions

• Telnet is missing from the Windows features in Windows 7

  I wanted to use telnet.  I went to the command prompt and enter the name of the telnet server.  He received a message indicating that it does not recognize the telnet command.  I thought that it had to be turned on in Windows (features) components.  I went to the Control Panel, get the programs, and then turn on or off Windows features enable.  Completely empty the box that opens.   There is no options to check or uncheck.  It is completely empty.  How can I get the Windows features in there?

  Concord wrote:
  > I tried to use telnet. I went to the command prompt and enter telnet
  > servername. He received a messege indicating that it has not identified the telnet
  > command. I thought he must be turned on in Windows components
  > (Features). I went to control panel, download programs and select Activate Windows
  > features on or off. Completely empty the box that opens. There is zero
  > options to check or uncheck. It is completely empty. How can I get the windows
  > Features in there?
   
   
  Windows 7 support:
   
  By default, Telnet is not installed with Windows, but you can install it
  by following the steps below.
   
  To install the Telnet Client
  Click the Start button, select Control Panel and then click programs.
   
  Under programs and features, click Turn Windows features turn on or off. If
  you are prompted for an administrator password or confirmation, type the
  password or provide confirmation.
   
  In the Windows features dialog box, select the Telnet Client check box.
   
  Click OK. The installation may take several minutes.
   
   
  --
   
  Bruce Chambers
   
  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html
   
  http://support.Microsoft.com/default.aspx/KB/555375
   
  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin
   
  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell
   
  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot
   

• The "Windows features" dialog box is empty in Windows 7

  When I click on turn on or off Windows features in the programs and features Control Panel, the Windows features dialog box is empty, no functionality is displayed. What should I do?

  Thank you buddy, but sfc.exe/scannow not worked and I faced another error! (windows resource protection could not start the repair service).

  Finally, I found the solution:
  (1) If you receive the error "Registry space" low, set the size limit of the registry to "unlimited":

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

  Key: RegistrySizeLimit

  Type: REG_DWORD

  Value: 0xffffff (4294967295)

  (2) restart

  (3) as administrator, open a command prompt and run "SFC/scannow". The command should complete successfully and when errors have been detected, they should be corrected.

  Follow the steps and good luck!

• Default configuration of the windows features. Restoration of the changes. Do not turn off your computer... HEEELLLPP!

  After restart my Asus X55oE due to necessary updates, I got «default configure features windows.» Restoration of the changes. Do not turn off your computer. After reading several messages through other forums, I turned it and then turn again only to receive the same screen. Some of these forums say that it can take 2 hours or more because of so many updates made at the same time. I think I was trying to upgrade windows 8 for windows 8.1.

  I'm really worried about it just because I just got back this PC from ASUS and am needing to work. Can someone tell me if there are other options or make sure that it just take a while? I also read that you can actually go to the control panel > windows update > help to erase mistakes. Also, someone said that you can customize the number of updates at a time can be both. I certainly do not happen again. Help would be greatly appreciated. Thank you in advance!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions while, Windows 8.1 in the computer installation.  We are happy to help you in the matter of fixing.

  You can try to follow these suggestions mentioned in the Microsoft article below to solve the problem with the installation of Windows 8.1 because Windows 8.1 is also an update for Windows 8 and these suggestions would help you with the same.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If this does not help then, try to disable anti-virus and see if that helps.

  Disable the anti-virus software

  (Also applies to Windows 8 and 8.1 of widows)

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Win Vista: Restoration of the window tells me that there may be errors on the disk, check the disk fails or the other.

  Restoration of tell me that there are errors on the disc that allows the utility disk check, who then told me that it won't work while Windows is running and asks if I want the calendar for the next restart of Windows, I have check the Yes box and try to fix the errors. When I restart or turn off and on, nothing happens. It restarts normally.
  I wanted to restore it's because my laptop (dell inpiron 1525) is not hibernating or sleep I noticed after installing the updated drivers from dell. When I went to use the sys restore is when I noticed what is happening now.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  --
  ..
  --
  "spaz12" wrote in message news: 9fff9795-78 c 0 - 4A 41-9652-a30919d15ea2...
  > Restore tell me that there are errors on the disc which shows the disc
  > launch utility, who then told me that it won't work so that Windows is check
  If I want to schedule for next time window
  > restarts, I check the Yes box and try to fix the errors. When I restart or turn
  > and now turn it on, nothing happens. It restarts normally.
  > I want to restore it's because my laptop (dell inpiron 1525) is not
  > hibernation or sleep I noticed after installing the updated drivers
  > from dell. When I went to use the sys restore is when I noticed what is
  > right now.
  >

• Default configuration of the windows features, returning from changes

  Failure configuring windows features, returning from changes

  What is the cause?

  Sorry, can't say. You must post a lot more detail.

• Regarding the restoration of the Windows 8 of recovery on a new disk media HARD empty.

  I have a HP Pavilion laptop pre-installed Windows 8 (under warranty) and I get a new drive HARD HP vacuum in replacement.

  I have already created a set of recovery media.

  My question is that I would be able to install the Windows 8 by using the recovery media (created by me) on the new empty hard drive?

  and what about the key of Windows 8?

  Hello

  Your recovery discs should install windows 8 on a new hard drive with no problems - windows 8 activation key is stored in your notebooks bios chip and will be read automatically by the installation disc.

  To boot from your recovery disks, you will need to disable "Secure Boot" - see the HP document on the link below in this regard.

  http://support.HP.com/us-en/document/c03736054

  Kind regards

  DP - K

• Install Fax and scan component. Followed the instructions, but there is no 'SCAN of WINDOWS AND FAX' checkbox in the "WINDOWS FEATURES" window

  I followed the "install, configure and send faxes in windows vista" page, but there was no "windows fax and scan" box in the pop-up "Windows features". I have a modem-fax HDAUDIO soft data installed.

  You don't say what version of Vista you have.

  http://www.Microsoft.com/Windows/Windows-Vista/features/fax-scan.aspx

  Home editions of Vista have NO FAX features.

  You need 3rd Party Software: http://www.snapfiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon.

  Mick Murphy - Microsoft partner

• Restore saved the Windows Mail Messages in the New Installation of Windows Mail

  I found the following on this forum thread. Further to this review in the second paragraph, I was able to move a message to the empty folder. But I was unable to move the other messages in the folder. The files I tried to move appeared as attachments in a new message. The .eml files and not marked read-only. What should I try next?

  TIA,

  Michael R

  Windows Mail does not dbx files.  Copy the store directory of all message on the desktop of the new machine.  Then right-click on the file and go to properties and make sure that they are not read-only.  Then go to file | Import | Messages in WinMail and choose the format from Windows Mail 7 and point to this directory.   See also here for general information: www.oehelp.com/backup.aspx#wm
   
  If you can not always get messages in folders, you can create a new folder in WinMail and open it so that it displays a list of empty message.  Then, open up one of the subdirectories containing eml files in Explorer and drag an eml file on top of the list of message empty folder and drop and you will see it is embedded in the file.  Once you get a job, you can drag and drop all eml files at a time, as long as they are only the eml files.
   
  Steve
   
  wrote in message email: removed privacy news ...

  I'll have to re - set up my Windows Mail after the death of my old hard drive. I am trying to import my old files from my Windows Mail Backup in my new Windows Mail. I was able to transfer the former folders of the backup but when I go to import it recognizes not all files. The error reads: "no messages are located in this folder or another application is running...". "I read several threads and it seems I also have to transfer via a file called folders.dbx, but it is not a list. I did a complete search on my C drive and nothing. How can I get these old records imported without this file?

  Thank you!

  They are attachments because you drag another file in addition to the eml files.  When you select the eml files to ensure that they areonly the eml files and then it will work.
   
  see you soon,
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I found the following on this forum thread. Further to this review in the second paragraph, I was able to move a message to the empty folder. But I was unable to move the other messages in the folder. The files I tried to move appeared as attachments in a new message. The .eml files and not marked read-only. What should I try next?

  TIA,

  Michael R

  Windows Mail does not dbx files.  Copy the store directory of all message on the desktop of the new machine.  Then right-click on the file and go to properties and make sure that they are not read-only.  Then go to file | Import | Messages in WinMail and choose the format from Windows Mail 7 and point to this directory.   See also here for general information: www.oehelp.com/backup.aspx#wm
   
  If you can not always get messages in folders, you can create a new folder in WinMail and open it so that it displays a list of empty message.  Then, open up one of the subdirectories containing eml files in Explorer and drag an eml file on top of the list of message empty folder and drop and you will see it is embedded in the file.  Once you get a job, you can drag and drop all eml files at a time, as long as they are only the eml files.
   
  Steve
   
  wrote in message email: removed privacy news ...

  I'll have to re - set up my Windows Mail after the death of my old hard drive. I am trying to import my old files from my Windows Mail Backup in my new Windows Mail. I was able to transfer the former folders of the backup but when I go to import it recognizes not all files. The error reads: "no messages are located in this folder or another application is running...". "I read several threads and it seems I also have to transfer via a file called folders.dbx, but it is not a list. I did a complete search on my C drive and nothing. How can I get these old records imported without this file?

  Thank you!

• Reinstall the Windows 7 upgrade

  My Gateway PC crashed and I tried to restore with the Windows 7 Upgrade dvd and it did load up and installed and then stop to restart. Once it restarted, the screen works reconfiguration and became black. After trying to restart several times I kept getting a black screen on several occasions, I then did a clean installation of the OEM Windows Vista Home Premium and then tried to load Windows 7 upgrade - same thing with the black screen.  Did an another clean install of Vista and this time I have activated Vista with the slui.exe 4 and activation has been refused. I then took the license key number on the back of the gateway PC and did a change windows license key then slui.exe 4 and it has been properly activated OEM Windows Vista with activation of the phone.
  At this point, I'm with an its own Active Window Vista Home Premium and need to know how the used the Windows 7 upgrade disc for windows 7 load on my pc without any problem of black screen. I appreciate any help on this.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Its possible your installation media can be damaged, try to get a new copy:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

• Not able to locate the Windows Media Player 12.

  Original title: Windows Media Download? Do not find... disappeared

  Recently, I had to do a check disk and a system restore. Back to the computer, I was able to locate the Windows Media Player 12 United Nations, I looked and looked and there was'nt even situated in the 'Windows features on and outside Tower' box. Then I got on the chat with microsoft and they sent me a link to dpownload it again once, however I downloaded it, and he kept saying "these updates are not compatible with your computer": even if I downloaded the correct link and also I'm aware of updates. Also, I tried to find the download on microsofts website and it says that the page is unavailable.

  I was able to locate the media player in the C drive, but only fragments of it, I know its there somewhere and I was wondering if there was a way to access?

  I don't want a response to "go to microsoft and redownload. I'm pretty crazy right now with people who post those.

  Someone at - it true tech tips? Apparently, Microsoft is without it.

  anyone?

  Windows Media Player 12 comes by default with Windows 7.

  Check out these links MS

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-12

  http://Windows.Microsoft.com/en-us/Windows/Windows-Media-Player

  http://www.Microsoft.com/en-us/download/Windows-Media-Player-details.aspx

  Try the steps mentioned by MS and audit officer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/problems-with-Windows-Media-Player-12-for-Windows/a2e4c0a3-3e3c-4C59-b5cd-d54f7d29ad30

• I get the Windows Update error 80070490 blues! -Vista

  Original title: I get the Windows Update error 80070490 blues!

  I am running: Windows Vista Ultimate 32-bit & Internet Explorer 7 (impossible to upgrade to IE8). I've beaten my head against the wall for well over a month now because I can't seem to install the following updates without entering a code 80070490 error:

  KB975467

  KB959426

  KB968389

  KB970430

  KB971737

  I did the following in all possible combinations in an attempt to install these updates:

  Disabled user account control

  turned off the Windows Firewall

  disabled my antivirus (Avira Anti - Vir Personal)

  To put it succinctly, I can't think of anything to do after following all of the ideas, tips & suggestions help Section!

  Help, please! All I can think to do now is to get some black candles and sacrifice a rubber chicken!

  Wouldn't you...

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011 - Update Services

• Outlook Express opens to maximize the window always.

  Victorinox original title: outlook express.

  Hello everyone.

  I'm new to these forms. so I hope that I've posted to the correct form. Moderators please move my post if I'm in the wrong form.

  My question is: when I opened the window of outlook express it opens in the window expand only.
  I'm not able to resize the window.
  When I try to enter this window with the mouse cursor and drag this window that does not either.
  When I click Restore down the window will minimize in the taskbar.
  the only way I can open re which minimize the window in the task bar it is right-click on it and select optimize.
  also when I right click that minimize button in the task bar and the small box opens, the move, the size and the reduced are grayed out.
  the exact behavior even happens when I open the Task Manager window and the window add / remove programs.

  I am able to enter with the cursor of the mouse normally on IE8 Windows, Notepad window, WordPad and the Control Panel window and re size all of these windows.

  How can I fix?

  I can't think of all the programs I have installed recently.

  I am running Windows XP edition Home 32 x 86 SP3 with all current updates.
  I am running IE8 with all current updates.
  I am running McAffee internet Security with all current updates...
  I think that my skills with windows and computers are a little below average I think.

  I would appreciate a response and assistance :)

  Thanks in advance
  Charles

  Hi Charles,

  Try to connect with different profile and see if the problem persists? Say to connect as an administrator and see if the problem is repeated here.

  If you are already connected as long as administrator, try to create a different profile-> click on Start-> settings-> Control Panel-> users and accounts. (http://www.ehow.com/how_2078860_create-new-user-account-windows.html)

  If everything works well, copy your problematic profile to this new profile data see: http://support.microsoft.com/kb/811151

  I hope this helps.

• Impossible to get anything it either appears in the box of Windows features.

  When I opened the Windows features dialog box, it acts like it is looking and the box remains clear. I have never chcking option boxes. Have you ever seen this before? I am running Vista Business.

  Thank you

  "This entry indicates that the content of the file does not match the definition of operating system for the file. In this case, the SFC.exe program cannot repair the file. »

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228

  If SFC cannot complete or repair a file:
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• Could not access the Windows Installer service

  I am tring to install .NET Framework 2.0 and windows gives me an error saying that my Windows service install could not be accessed

  I'm tring to appear on an error message received when I tried to download .NET Framework 2.0 it says could not access windows service install and I need this program to the someone can help?

  Hello
  1. are you able to install other programs?
  
  This problem may occur if one of the following conditions is true:
  1. the Windows Installer files that are on your drive hard are missing or are damaged.
  2. you install or remove a program that uses the package file to install software for the Microsoft install (MSI) Windows (.msi).
   
  To resolve this problem, use the following methods.
  Method 1: Reregister Windows install.
  1. Click Start, type cmd, right-click on cmd, and then click Run as administrator.
  2. at the command prompt type msiexec /unreg and then press ENTER.
  3. at the prompt, type msiexec/regserver, and then press ENTER.
   
  Method 2: Disable the .NET Framework 3.0 before installing .NET Framework 2.0
  Microsoft .NET Framework 3.0 is the default version built into Windows Vista. We recommend that you first cross check if it is enabled in the Windows features turn on or off. To do this, try the following steps.
  1. click on start, type optionalfeatures and press to enter.
  2. in the verification of the list if .NET Framework 3.0 is enabled or disabled. If it is enabled, disable it and restart the computer.
  3. install .NET Framework 2.0 and check the result.
   
  Method 3: Install the latest .NET Framework.
  1. visit the following Web site and download the latest version and install it.
  http://go.Microsoft.com/fwlink/?LinkId=120486
   
  For more information, see this link: http://support.microsoft.com/kb/942288
   
  NOTE: Don't forget to follow method 2 to activate the .NET Framework.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.