Restore and upgrade 10.2.0.3 to 11.2.0.3

Similar Questions

• Restoration and upgrade missing mail

  Hello

  I restored ACS config and later, we went to 5.5 patch 11. Before that, we have received emails during backup and purge of the database have been carried out. But because we did this restoration and improved 5.5 patch8 patch 11 we do not receive these emails. Where is made this config? I checked the config and it seems fine. How will I know if these emails are sent to the ACS? Where in the config set us this up? any advice?

  Thank you very much

  Hi Jesus,

  I'm suspect Alert Manager is not started correctly. Could you please restart the "view-alertmanager" (stop view-alertmanager, start alertmanager view acs acs) and check if we get alarms or not?

  Thank you

  Catherine

  Please evaluate the useful messages and mark the correct answers.

• Can I restore the backup Windows XP on a new computer with Windows 7 COA and upgrade to Windows 7?

  Original title: upgrade question.

  I currently have a PC running XP in a system with an IDE drive. The system has many applications that the company has moved the installation discs, so I need to move the contents of the entire disk to a new system. I was about to do the following:
   
  System backup with a recovery boot disk, in this case a USB.
   
  Restore the entire operating system to a new system that will have a SATA drive in it. The new system will have a COST for Windows 7.
   
  Start the XP and upgrade to Windows 7.
   
  My question is, will it work or the absence of the COA of XP on the new system will prevent me to install?
   
  Any help would be appreciated.
   
  Thank you
   
  The f

  Short answer, "no, this will not work."

  It is unclear what you mean by 'backup' and 'restore', but it seems that if you are referring to the creation of a disk image or a clone of disk on an external drive and then either restore the image or cloning to the new computer.  Assuming that both of these computers was provided with Windows pre-installed, this process will almost certainly result in a facility that cannot be 'activated '.  In addition, unless the software you use has something like Acronis Universal Restore, restore the image from your old computer to a player in a new computer with a different hardware simply will not work.

  In addition, the lack of an XP license is not the issue.  There are several problems with the process you describe, but basically, an "upgrade" from XP to Win 7 requires a "custom installation" which means that applications should be re-installed.

• Portege Z830 - restoration and reconstruction

  I have a Portege Z830 who plays up!.

  I tried to load on the main drivers of function and a few other utilities toshiba to get the lit keyboard, IE helps high and low BRIGHTNESS keys. It did not work.

  Since then, my laptop takes centuries start, I can't use windows update, it crashes and he asks me my password but I can not enter as it crashes again.
  If I use windows troubleshooting tool, which weighs too much. And internet Explorer within the win8.1 does not even the bbc.

  I'm close enough to think that I have to do a full rebuild.

  My challenge is that it is installed with Windows 7 and I have upgraded to windows 8 and 8.1.

  My questions are:
  1. everyone knows what precedes and is there quick ways to solve the above problems.
  2. What is the best way to rebuild my laptop, I have to go back to windows 7 and then upgrade to windows 8 again?

  Ideas gratefully received, I'm ok, reconstruction not eager not to there because it takes forever to backup and restore, and I must be missing something. But I think its necessary.

  As far as I know that the Portege or Satellite Z830 series was not supported to win 8.1 by Toshiba because he did not appear in the Windows 8.1 compatibility matrix.

  This means also to win 8.1 drivers or software for this series isn't available and not downloadable. This could be the reason why you n t get some special features for laptop.

  From my point of view of a few you might try to fix the Win 8.1 preinstalled using the repair feature s own system. If this doesn t help, I'm afraid, you need to restore the system of m.

  Are you what is the best way to rebuild the laptop?
  Well, it depends on the operating system.

  The Portege Z830 was pre-installed with Win 7. In this case the use of the Toshiba recovery disc install Win 7 again.
  If you want to reuse 8.1 Win, you have two choices: either you would update the Win 7 system-> 8-> 8.1 Win Win
  Or you buy the Win 8.1 Microsoft license and install own 8.1 win on this laptop.

  But as I said above: the drivers Win 8.1 and the software isn't available for this model

• How to restore an upgrade to Vista HP for Vista Ultimate?

  I've updated to Vista Ultimate on my laptop and now I want to restore that upgrading to Vista HP.  How do I do that?

  Hello

  You CAN depending on how you installed the complete edition

  If you have a folder windows.old on your hard drive and enough hard drive space you CAN rollback

  and if you do not have a folder windows.old here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• The game I played request now that I log in as administrator and update and upgrade fails

  * O.T. > Winddows 7

  Two issues have appeared recently. One: the game I played (solo, not online) now the queries that I log in as an administrator. I am the administrator! Two: Despite many attempts to download updates and upgrade to Windows 10, nothing happens!

  Help!

  Thank you

  Right click on the executable file for the game, and then click Run as administrator.

  You can also try upgrading Windows 10 manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• to upgrade my iMac yosemite Sierra do I need save iWork applications first and upgrade etc.?

  To upgrade my iMac Yosemite Sierra can I first of all backup and upgrade the iWork etc. applications. ?

  He can't make a backup.  You don't need to do anything else.

• Even in Safe Mode, minimize, restore and close is missing, even if the functions remain, and a dialog box now appears at the opening of the FF.

  Since I installed the latest update of Firefox, reduce it, restore, and close are missing visually, even if their functions are always present.

  I also started to have one of these dialog boxes asking whether or not I'd like to allow a program to make changes to my PC when I open Firefox.

  I could fix this apparently either by way of turn disable the compatibility mode setting, or by rebooting completely.

  Then, Firefox logo disappeared from the icon for a while, being replaced by the default Windows system image which is displayed under the icon of unspecified files.

  I do not know whether or not the uninstalling and reinstalling Flash Player and restart had something to do with this corrected, but at some point, she is back to normal.

• I use 5s iPhone and upgrade to iOS 9.3.1 but he can't get all the features...

  I use 5s iPhone and upgrade to iOS 9.3.1 but he can't get all the features...

  What features Miss do you?

• My favorites have disappeared and I can not find them - I tried to restore and nothing is there.

  I tried to restore, and nothing is there. Please help me find where they might be saving too.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file

  See also:

  • http://KB.mozillazine.org/Lost_bookmarks
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• all of my photos in icloud were removed from the restoration (and did not find the album recently removed to icloud)

  
  

  
  

  all of my photos in icloud were removed from the restoration (and did not find the album recently removed to icloud)

  The opposite happened to me - in the opposite direction! I found all my pictures from Nokia mobile in icloud on my iPad a few days ago, had no blue cogwheels devices! The two devices + home phone is all about wireless internet of the contract with ORANGE in Europe! They will not help,

  I think my router - put in place by an expatriate for me - is hacked because of the problem. I didn't ask him to change my contract or warn of my move when I did 2 years ago - but he went ahead and made Orange disclose no information telling me his "confidential".

• error 53 on I phone6, I can't restore and update to ios 9.1, there by icloud, but it does not work

  I can't restore and update ios9.1 53 on iphone error 6, I try by icloud, but it does not work

  the screen on the myphone was raplaced, how can I restore phone

• I'm running on snow leopard and upgrade to el capitan. If I just upgrade, my data will be safe after finished or need to recover again?

  I'm running on snow leopard and upgrade to el capitan. If I just update without backup (because I have no external HARD disk) data will generally be safe / normal after all as we updated iOS iPhone via OTA or need to recover the data again whenever we have updated to Mac OS?

  If all goes to plan, your data will be safe.  At times things go bad for a backup is indispensable if you value your data.

  Ciao.

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I am trying system restore and it says I have no restore points and will not let me create restore points

  help I am trying system restore and it says I have no restore points and will not let me create restore points
  * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

  Hello

  1. what exactly happens when you try to create a system restore point?

  2. you receive an error message when you create system restore point?

  3. what operating system is installed on the computer?

  In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

  Method 1:

  Step 1:

  Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

  To check the service

  (a) click Start

  (b) in the start search box type Services

  (c) click on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Shadow copy volume started Automatic\Manual

  Step 2:

  Also check the dependency services that are required for the System Restore Service run.

  To verify that double-click the service, and click the Dependencies tab.

  This service must be started before the restore point is created automatically or manually.

   

  Method 2:

  Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

  Follow the articles given below to change the settings for the firewall and security software settings

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:

  If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.