restore the 2 tables FND_USER and FND_ORACLE_USERID
Just practing fndcpass, took the backup of these tables, create the table in select fnd_backup * to fnd_ *, I was wondering what is the trunk command to restore these 2 tables.I just changed apps, sysadmin, & alloracle pw, I want just convenient if these are up... messed up somehow update the lines for these users only?
Just practing fndcpass, took the backup of these tables, create the table in select fnd_backup * to fnd_ *, I was wondering what is the trunk command to restore these 2 tables.
You need to save the two tables, FND_USER and FND_ORACLE_USERID.
To restore, just rename tables (rename FND_USER_BACKUP in FND_USER and FND_ORACLE_USERID_BACKUP to FND_ORACLE_USERID after you rename the tables updated to FND_USER and FND_ORACLE_USERID).
FNDCPASS. Troubleshooting Guide to connect and change the passwords of Applications [ID 1306938.1]
I just changed apps, sysadmin, & alloracle pw, I want just convenient if these are up... messed up somehow update the lines for these users only?
Direct update is not supported, so you'll need to restore the backup of the tables or reuse FNDCPASS to change the password back.
Thank you
Hussein
Tags: Oracle Applications
Similar Questions
-
fnd_user and fnd_oracle_userid issues
Hi all
EBS R12.1.1 on OUL5 11 GR 1 material DB
on the FND_ORACLE_USERID table
ORACLE_USERNAME ENCRYPTED_ORACLE_PASSWORD
APPLSYS ZG05FEE3C47A9E65888CEBE45863D227585B6ED424CEBE497A2A60467103D340695C7B572BD0F07EEF3CC106180508BFD86A
ON FND_USER table
USER_ID, USER_NAME ENCRYPTED_FOUNDATION_PASSWORD ENCRYPTED_USER_PASSWORD
5 INVALID INVALID APPSMGR
QUESTIONS RELATING TO THE:
THE "INVALID" UNDER the COLUMNS ENCRYPTED_FOUNDATION_PASSWORD and ENCRYPTED_USER_PASSWORD: they are NORMAL
WHAT APPS USER RESTORATION; I need to restore the two tables?
Thanks in advance,
ConcerningHello
THE "INVALID" UNDER the COLUMNS ENCRYPTED_FOUNDATION_PASSWORD and ENCRYPTED_USER_PASSWORD: they are NORMAL
This indicates that the account is locked.
See these documents for more information about disabling this account.
Best practices for securing Oracle E-Business Suite Release 12 [403537.1 ID]
What is the Impact of a deactivation of seeded Oracle users. ? [418767.1 ID]WHAT APPS USER RESTORATION; I need to restore the two tables?
Yes (with some conditions) - see (how to troubleshoot connection problems after change APPS utility password Using FNDCPASS [809155.1 ID]) for more details.
Thank you
Hussein -
My computer crashed so I had to use my recovery disks that are about 8-10 years. When I reinstalled Windows service pack 2, the system recovery tools and several other microsoft tools not have installed on my system. Is it possible to recover these tools? The command prompt tells me that they are not on my system and get help from the Server Manager in the service (Net HelpMSG 2185) option. Can you tell me what that means and if/how I can do this? I can't find a tab from the system restore on my computer. I guess that's because I have more access to these tools. My messages when I try to update things like Windows Media Player tells me that I can't set a date of restoration and that if I lose my installed programs that they can not be recovered. Guess that means I have to use my recovery again disks?
<(Microsoft tools="" for="" the="" system="" restore,="" disk="" framentation,="" and="" several="" others="" are="" missing.="" is="" there="" a="" way="" to="" retreive/reload="" these="" tools?="" (assessories,="" system="" tools)="">
Hey, take a look at the article and try the steps
http://www.softwaretipsandtricks.com/Forum/Windows-XP/17333-System-Restore-tab-missing-XP-Pro.html
See you soon!
(Microsoft> -
Problem with the af:table links and views
I want to display a table with data from a database table called PERSON, so I use af:table tag.
The PERSON table has the following fields:
- PERSON_CODE
- PERSON_NAME
- PERSON_COD_STATE
The PERSON_STATE field is a foreign key to another table called PERSON_STATE:
- PERSON_COD_STATE
- DESCRIPTION
I created a view for the data of the PERSON (personView) table. Because I want to show the person status description in the af: table, I created another view for the data in table PERSON_STATE (personStateView). And I've also created a link between personView and personStateView.
In the column of the af: table that represents the State of no one, I drop the field 'description' of the State view linked to the view of anyone.
When I run the JSP, the State is not displayed correctly. All persons are displayed with the same State.
During the test directly with the application module, the display link works correctly.
View links inside an af:table work?
I work with ADF 10 g.
Thank you
Your scenario should be treated with a sql (VO on two EOs) join with a relationship master / detail. The table will be able to browse the details for each master record to time stamping.
-
Do not have access to the BugDB - table 'rpthead_history' and 'bug_user '.
Hello
I prepare a report analysing where same query works in SQL Developer, but it does not work on APEX. Database link has been granted previously to the workspace and the following diagram:
APEX workspace: OIEDEV
APEX scheme: OIEDEV
Error States:
========
ORA-00942: table or view does not exist
Question:
======
Is this schema of database link was created has no access to these tables - "rpthead_history" and "bug_user". So in this case, what to do?
SQL query:
=======
Select r.programmer "assignee."
r.RPTNO "Bug number"
r.Status "Bug Status",
r.cs_priority "priority."
r.upd_by ' latest update of "of rpthead@bugdb r, rpthead_history@bugdb u h,bug_user@bugdb
where product_id = 397 and
r.rptd_by <>'ARU' and
r.cs_priority < 3 and
r.programmer = u.bug_username and
r.UPD_DATE > sysdate-7 and
r.Status > 30 and
r.Status not in (11,10,30,40,51) and
h.old_status in (11,30,40,10,51) and h.new_status > 30 and
h.new_status not in (33,40,51) and h.upd_date > sysdate-7 and r.rptno = h.rptno and not exists (select null from rpthead_history h1 where h1.rptno = h.rptno and h1.upd_date > h.upd_date and h1.new_status in (11,40,51)) order by 1
Thank you
RiouHello
I think that this public forum is not place question about internal Oracle tools?
Kind regards
Jari-----
http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0 -
Restore the partition table data
Hello
DB 10.2.0.1
I have a dump file in which exported the data from a table to a database. This table is based partioned. I have imported into the database B. I have truncated or tried successively to the partition of the table in database B now I want to import the data from the export dump file in the same table. I don't want to import the data again for all partitions. I want to just import only truncated how data I could do?
Thank youHello
Even I did as you say, but we give below error.
In fact, it is not an error message:
Import completed successfully without warnings.
You have SQL code contained in the "dump":
CREATE TABLE 'TRADING_TEST' ("BRAND_DESCRIPTION' VARCHAR2 (120)...)
For example, you may notice that importation will try to recreate the Table of TRADING_TEST with all its partitions. Of course, it will generate an error and you will not be able to import the data in the Partition. Unless you have just TRUNCATE and you use the parameter IGNORE = Y.
So, if you TRUNCATE the Partition you do not have to recreate.
If you DROP the Partition, it is best to recreate first (ALTER TABLE ADD PARTITION...).
Then import you the datas like that (I just add IGNORE and LOG settings):
imp system/password file=C:\exportTable32\table.dmp FROMUSER=dev touser=system tables=(TRADING_TEST:A15) ignore=y log=C:\exportTable32\table.log
However, I hope that it is just for test purpose, because it is not recommended to create the user Tables in the SYSTEM.
Hope this helps.
Best regards
Jean Valentine -
How to restore the original size placed and mounted the image?
If a picture is placed on the frame, mounted on it, saved file. When I open it again, is there a way to restore the original size of the image?
Thanks in advance for any help.
Vera
Click on the image with white pointer/selector and set the size of the image at 100%
-
Imagine an animated scene 3D CGI (not a stereoscopic scene where you need glasses but a regular CGI 3D scene).
'
In the scene, there is a main area (call it the background element) and the foreground or the foreground element. The substantive element of the scene has a car on the road in the countryside. The foreground element consists of trees and shrubs that grow on trees. The shot is 4 seconds and movement of the camera is a simple camera upward tilt, where the camera is located upward to the Crown of a tree and behind that tree and the camera tilts down to place as he leans on his car in the background.
It is recommended to render elements (background, foreground, etc.) in the separate and composite passes in post-production.
The question is:
Why is it advisable to render the elements of background and foreground in separate passages in a 3D CGI animated the scene? In the example of the previous shot, why not make the background and foreground together in the same passage?
In order to strengthen this argument, I read somewhere online of an excerpt of a book that says the following:
"In addition, it is also common to render elements of 3D animation, such scenes.
as the background and foreground, passes separate to be met
in the post ".
Why is he current to render the components separately in the animated scene?
Thank you!
If you have separate passages, you can choose to manipulate elements in the application of the composition, rather than opportunities all in 3D, which can take some time. For example, you might choose to blur on the background in the application of the makeup, or you could choose to lighten or darken. Similarly, when rendering passes from the scene, you can have - say - a passage just for reflections, so you can decide to mix the highlights/highlights different facts in the application of the makeup, to make them stand out more or submit their. And so on.
-
Cannot access the internet (table routing and connection seems to be very well)
Hello
I have a problem that I can't know at the present time.The problem started after uninstalling cisco anyconnect vpn.Description:cannot access Web sites or even the router configuration panelcannot tracert beyond the first jump (router)can ping to ip Internet addressesrouting table appears to be wellAfter disabling all services additional error is always persistentcomputer is connected to the router cableSo, it seems that something is blocking the connection, but I can't understand what...It fixed to the help of netsh winsock reset catalog and restart...
-
restore the computer without disc and locked out__
computer restored at the factory and the password I entered in the habit of let me back in how to reset with backup discs or how to get the disks for new emachine
Hello
Once you have restored your computer to factory settings it should not ask for any password. If it still asks for the one that you may need to contact the manufacturer and check with them.
http://support.gateway.com/EMAC/
Microsoft cannot help you recover passwords for Microsoft who are lost or forgotten products. You can go through the article below.
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to restore the XP boot loader and get rid of Windows 7 a
Windows Boot Manager
I converted my computer simple boot with Win XP to a system dual boot installing another HDD with Windows 7 Pro. and it has also installed Windows Boot Manager. Now, I want to go back to a system boot and removed the second hard drive with Windows 7 but am unable to get rid of the boot manager who always appears at boot. Any suggestions?
Hi George,.
You may need to boot into the recovery console and fix the Master Boot Record (MBR).
Step 1: To boot into the recovery console, refer to this article.
Description of the Windows XP Recovery Console for advanced users
Step 2: Run Fixmbr and Fixboot from the recovery console commands.
-
How can I update several lines based on the comparison of the fields table 1 and 2
I create the following SQL to test what I found a method to update the records where the fields below the game, but what ends up happening is that the update functions works the first time and then basically updates everything to null. I don't understand what I'm doing wrong. New to this.
UPDATE SLS_HDR B
DEFINE (B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS,
B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B,
B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB,
B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT, B.UPDATED_DT)
(SELECT =
A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS,
A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B,
A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2, A.PLAN_DEL_DT, A.TXTA, A.TXTB,
A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT, A.PAY_CONTACT, A.ORD_AMT, SYSDATE
Of
SLS_HDR_TEMP HAS
WHERE
A.FIN_COMP = B.FIN_COMP AND
A.LOG_COMP = B.LOG_COMP AND
A.ORD_NO = B.ORD_NO AND
A.TRANS_DT = B.TRANS_DT AND
A.BP_TYPE = B.BP_TYPE AND
A.STATUS <>B.STATUS);
Can someone advise?
Thank you
Published by: 903292 on December 19, 2011 13:15you don't have a where clause in your update so no-matched lines will be updated with null values
UPDATE SLS_HDR B SET ( B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS, B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B, B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB, B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT,B.UPDATED_DT ) = ( SELECT A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS, A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B, A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2,A.PLAN_DEL_DT, A.TXTA, A.TXTB, A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT,A.PAY_CONTACT, A.ORD_AMT, SYSDATE FROM SLS_HDR_TEMP A WHERE A.FIN_COMP = B.FIN_COMP AND A.LOG_COMP = B.LOG_COMP AND A.ORD_NO = B.ORD_NO AND A.TRANS_DT = B.TRANS_DT AND A.BP_TYPE = B.BP_TYPE AND A.STATUS= B.STATUS ) WHERE EXISTS ( select null from SLS_HDR_TEMP A WHERE A.FIN_COMP = B.FIN_COMP AND A.LOG_COMP = B.LOG_COMP AND A.ORD_NO = B.ORD_NO AND A.TRANS_DT = B.TRANS_DT AND A.BP_TYPE = B.BP_TYPE AND A.STATUS= B.STATUS )
OR using Merge
Merge into SLS_HDR B using SLS_HDR_TEMP A on (A.FIN_COMP = B.FIN_COMP AND A.LOG_COMP = B.LOG_COMP AND A.ORD_NO = B.ORD_NO AND A.TRANS_DT = B.TRANS_DT AND A.BP_TYPE = B.BP_TYPE AND A.STATUS= B.STATUS) when matched then update set (B.ORD_DT, B.SHIP_ADD_CD, B.INV_ADD_CD, B.LOB, B.STATUS, B.ORD_TYPE, B.HDR_ROUTE, B.PRICE_LIST, B.CUST_ORDER, B.REF_A, B.REF_B, B.ORD_REF, B.ORD_DISC, B.SREP, B.SREP2, B.PLAN_DEL_DT, B.TXTA, B.TXTB, B.INV_CONTACT, B.SHIP_CONTACT, B.SOLD_CONTACT, B.PAY_CONTACT, B.ORD_AMT,B.UPDATED_DT ) = (A.ORD_DT, A.SHIP_ADD_CD, A.INV_ADD_CD, A.LOB, A.STATUS, A.ORD_TYPE, A.HDR_ROUTE, A.PRICE_LIST, A.CUST_ORDER, A.REF_A, A.REF_B, A.ORD_REF, A.ORD_DISC, A.SREP, A.SREP2,A.PLAN_DEL_DT, A.TXTA, A.TXTB, A.INV_CONTACT, A.SHIP_CONTACT, A.SOLD_CONTACT,A.PAY_CONTACT, A.ORD_AMT, SYSDATE)
HTH...
Thank you
-
Apps for password has expired within the period of grace and FNDCPASS does not
Apps password has expired within the period of grace and FNDCPASS to help when we try to change the password it gives an error, but the account_status for user apps is still EXPIRED (GRACE). I should also mention that the account_status from APPLYSYS is open.
Back-end, I am able to connect to applications using the old password. This new password doesn't think in the database.
Please really apprepriate any help...
Concerning
So finally we internally researched and found the solution for the question below.
(1) we changed the following values at the time UNLIMITED.
PASSWORD_GRACE_TIME
PASSWORD_LIFE_TIME
(2) we took the backup of FND_USER and FND_ORACLE_USERID.
change user apps identified by
; (3) then tried FNDCPASS so he changed the apps
FNDCPASS apps /
0 system / SYSTEM APPLSYS (4) run on the database and Application Tier autoconfig.
Change the settings of password to its original values.
Start the application services and active user request execution to verify everything works well.
First, we tested the action plan on our test instance. then we updated the plan of action preceding the SR. We go come from Oracle's Support.
After the execution of the plan of action preceding our number got solved...
I share the solution so it can help others...
Thanks a lot for the help and time.
-
Back up and restore the iPhone of my mother
Hello. My mother just got his iPhone Unlocked, but it must be backed up and then restored as a new device and then restored again from a backup. It has its own Apple ID, but does not have a computer. If I connect the iPhone to my iMac, my iTunes opens, but it is based on my username. How can I do this using his user ID? If I can't then what should I do? Please let me know this afternoon, if you can. Thank you. Jerry Ritt
Backup the device the same as you would yourself. iTunes will take care of everything for you. I use my iMac to back up my devices to families who use four different ID of Apple and iTunes keeps everything separated and organized. Note that if you intend to restore the device from backup, it must transfer purchases to the Mac if your mother has applications that you do not on Mac. Alternatively, you can use iCloud on his device to create the backup, and then use iTunes on Mac to restore the device to unlock, and then restore the backup to iCloud. In this way your data of mothers never get on your Mac.
-
The HD to SSDS: how to restore the system and all the drivers?
Hello
I changed the HDD with a SSD. Now I want to restore the system (Windows 8) and all the drivers and applications. To do this I use (with DVD) HP Recovery Manager and I choose to install a clean install of the system, drivers and applications. After the copy of the set in the new hd, when the computer is reset, I get the message that there is no system in my HD!
Why? What can I do?Thank you
Enter the BIOS
Go to the tab system set
Scroll Startup Options
Go to boot order
Move the current SSD as the first device by following the instructions in the right pane
After making changes to the boot order, press F10 and click Yes to save the changes and then exit from BIOS
Maybe you are looking for
-
I have old cassettes VHS converted into digital files to download to iMovie, edit them and then burn a new DVD of the edited version. He wants to give me an avi file, but this seems to be fraught with problems. What type of file I ask they converte
-
T530, not on the display of the volume, caps lock, shift, Lebrun
I just updated all my programs with the lenovo update utility, including the BIOS system. Since the update I have not the ability to see my shift, the volume control or the led light on the screen. I need the driver for the shortcut keys, the only on
-
Just got a great opportunity Sansa E280. I use it for my most classic works. Today, I put a whole bunch of CD on it - not by using the method of synchronization, but not just by clicking on the music and saying "send to" Sansa. All by listening to m
-
I want to know how to put my vista as a vpn server, so I can connect from work?
I have Vista Home Basic! and I want it to be VPN server so this way I can access resources on this subject. After researching I found that a customer who wants to set up a private network virtual assigned must address PUBLIC IP. Please ask me I would
-
Select the Tunnel-Group based on OS devices
Hello having an ASA5512x is possible to have anyconnect-dial-in-PC-users asking their IDs AND also a one-time-password Whereas smartphone users only need to provide their username and a password without the need to manually select the profile? I've s