Restore the background inactive links

Similar Questions

• Restore the background toolbar (Adblock, made IE, IP,...)

  Used to have a "low" on firefox, toolbar he had ADBLOCK, IE make-er switch,...). Lost after leaving 10 windows to replace 7.

  Not a standard Firefox since the days DeVore Firefox 4.0. You probably had an add-on for the add-on bar.

  Maybe this one?
  https://addons.Mozilla.org/en-us/Firefox/addon/the-addon-bar/

• Restore the catalog and links after the C disk failures

  My drive C crashed recently so I replaced it with a new drive and I'm trying to reinstall all my software. My photos were all on my drive D (which is not affected). I managed to get my old C drive, works again and I installed it as a slave (now K) drive.

  I find the folder 'My project' on the old C drive and copied to the folder my pictures on my D drive.

  I then clicked file > catalog > location custom and traveled to the new location for my catalog. However, when I click on open, it waits a few seconds then the dialog box disappears and returns to the main photowell (empty): "no items match this combination of filters...» "(The filters are all checked..)

  As any of my photos have moved and I still have the orginal catalog file, I was hoping that I could just point the PE9 instal new to the catalog and everything would look as if nothing had happened... Is there something obvious I'm doing wrong? I've been watching the forum posts all day and not found anything quite like my situation or solutions that help.

  The files in my catalog are:

  backupCt.dat DAT 1 KB file

  Catalogue PSE9DB 126KB

  collstatus.dat DAT 1 KB file

  face. Thumb.9.cache CACHE file 15KB

  tagstatus.dat DAT 1 KB file

  Thumb.5.cache CACHE file 10 KB

  Very grateful in advance for any help in the resolution of this one...

  Tony

  The catalog you posted (126 KB) is an empty catalog.

  Search your entire computer *.pse9db and point the largest room Organizer.

  Ken

• Why not restore the link to Ctrl-click to open in a new tab?

  Between 22 and 24 versions, ctrl - click went as a keyboard shortcut to open a link in a new tab.

  Now there are two ways: rightclick the link, and choose a Fisher point to open in new tab, or the link middleclick.

  Right-click and choose the menu item is more difficult, because we actually watch and read the menu.

  MiddleClick isn't as easy or reliable for most people today since the middle mouse button is usually a wheel and hard to click with precision.

  I see no reason why you shouldn't restore Ctrl-click to open a link in a new tab and a lot of reasons why you should. Please will you do?

  Very well. I created a new profile and found that ctrl - click still does not behave correctly.

  And then it dawned on me that I was using the same Web site to run the test each time.

  So I tried it on another site and found that it worked very well there. I tried another and it worked there, too.

  The site with links for which ctrl - click is not working is realclearpolitics.com. It must have something to do with their HTML. Someone try for me, please.

  Thanks for the help, and I apologize for all the trouble I've put you through.

• I want to keep my browser in the background when I click a link

  I want to keep my browser in the background when I click on a link.
  I used to have in place but had to reset the default value.
  I don't remember the setting.

  You can view these prefs:

  • browser.tabs.loadBookmarksInBackground
  • browser.tabs.loadDivertedInBackground
  • browser.tabs.loadInBackground
  • http://KB.mozillazine.org/about:config

• When you use "cmd + click link" to open a link from Gmail in a new tab - tab opens in the foreground the background square.

  When I receive links sent in Gmail and I want to view them I usually 'Press cmd + click on the link' Open link in a new window. When I do that in Gmail it opens as a foreground tab, even if my default action is to open in the background.

  This is not the case in Hotmail or other site - just for Gmail. If I right click and open in new tab, then it opens correctly in a background tab but I wish that this action using 'cmd + click' if possible.

  What is the value of the browser.tabs.loadDivertedInBackground pref?

  • http://KB.mozillazine.org/about:config

• How to open the link in the background?

  Hey guys.

  I have weird problem. I can't open links from Skype in the background. Every time when I click on the link, wy browser opens and the downloads link. And if should open 3-5-N I should come back to Skype each time.

  Command + click does not work. The middle button on the mouse doesn't work ether.

  I have not found all things related in the settings.

  Could someone help me with way?

  It works in the new version of Skype for Mac, 6.14. You can read the release notes here:

  http://blogs.Skype.com/2014/02/19/Skype-for-Mac-6-14-refining-the-UI/

• Restoration incomplete background in the foreground

  Hello

  I use the method suggested here

  http://supportforums.BlackBerry.com/T5/Java-development/auto-start-and-RuntimeStore-usage-for-UIAppl...

  for transitionening of foreground to the background to the foreground. I noticed on os6 it worked very well. On os5 I often see that the restoration is incomplete! This means that some fields have become null! More specifically, I have 3 editFields (static), they just return null. Is - this unwritten rule that the user interface must be re-created each time and we shouldn't assume that the UI widgets would survive the transition all the time?

  Thanks for your comments.

  I use Eclipse with jre 1.5 and 5.0 plugin.

  I have found the problem. I was doing something dubious and the updating of the UI widgets without eventlock. Tests to see if this removes the problem. I also removed static - lying areas of the problem.

  Still welcome any additional info, if someone has.

  THX

• I use Photoshop elements on Windows 8.1 12.  When I go in the Expert Mode to change the available toolbar is displayed in a single column and missing several tools which foreground and background color.  How to restore the original toolbar?

  I use Photoshop elements on Windows 8.1 12.  When I go in the Expert Mode to change the available toolbar is displayed in a single column and missing several tools which foreground and background color.  How to restore the original toolbar?

  Try to re - set preferences.

  Go to: Edit > preferences > general (menu Photoshop Elements on Mac)

  Click on the button Reset preferences on the next launch

• Restoring the broken links to illustrations?

  I placed 8 photos in the first chapter of my book. I think I should have had them in Dropbox when I passed, so that I can continue to work on my laptop in another room on my main computer.  When I went back to work on my desk, I was warned of broken links.  I was unable to restore the links that I had withdrawn my Dropbox photo files.  Currently, they only exist on the pages of my first chapter.  I can't understand how to restore the links that I have been unable to transfer to Dropbox.f

  Just put them in the same folder that they were.

  Why do you delete them?

• Why restore the elements of background and foreground in separate passages in a scene animated 3D CGI?

  Imagine an animated scene 3D CGI (not a stereoscopic scene where you need glasses but a regular CGI 3D scene).

  '

  In the scene, there is a main area (call it the background element) and the foreground or the foreground element.  The substantive element of the scene has a car on the road in the countryside.  The foreground element consists of trees and shrubs that grow on trees. The shot is 4 seconds and movement of the camera is a simple camera upward tilt, where the camera is located upward to the Crown of a tree and behind that tree and the camera tilts down to place as he leans on his car in the background.

  It is recommended to render elements (background, foreground, etc.) in the separate and composite passes in post-production.

  The question is:

  Why is it advisable to render the elements of background and foreground in separate passages in a 3D CGI animated the scene? In the example of the previous shot, why not make the background and foreground together in the same passage?

  In order to strengthen this argument, I read somewhere online of an excerpt of a book that says the following:

  "In addition, it is also common to render elements of 3D animation, such scenes.

  as the background and foreground, passes separate to be met

  in the post ".

  Why is he current to render the components separately in the animated scene?

  Thank you!

  If you have separate passages, you can choose to manipulate elements in the application of the composition, rather than opportunities all in 3D, which can take some time. For example, you might choose to blur on the background in the application of the makeup, or you could choose to lighten or darken. Similarly, when rendering passes from the scene, you can have - say - a passage just for reflections, so you can decide to mix the highlights/highlights different facts in the application of the makeup, to make them stand out more or submit their. And so on.

• can not read the background tabs because they are now transparent in version 29.0.1

  With this new version, 29.0.1, it became difficult to read the tabs in the background. I now have in my eyes to read the tabs of the strain. Is it possible to restore the inactive tabs (background) the way in which they were posted before. Before it was always easy to read and to tabs. I checked under options to see if there was a way to do this with no luck. I never had this problem with previous versions, 1-28! Why this change? I actually tried different themes, but they all had the same problem, unless I went to a dark theme but dark themes are difficult to my eyes. Roll the cursor over the tabs does not help much either. As a user, we should be able to make things easy to see and read. Perhaps the ability to control the level of transparency (0-100) would be nice. Sometimes I have more than a dozen tabs open.

  I use windows 7 64-bit Home Premium

  1. Install Stylish and restart Firefox when prompted.
     • https://addons.Mozilla.org/firefox/addon/stylish/
  2. On the next page, click on the button install.
     • More background clear tabs Firefox - Australis - 29 | Userstyles.org

• restore the settings before the Vista views update!

  Impossible to expand the view when you use programs such as pogo.  Game screen is very small and does not help when you use the zoom to enlarge.  I used the restore function with a date prior to the update and everything works fine until windows update runs.  That mus increase the size of police etc, but can't do anything with the backgrounds of games or office and others.

  Hello
   
  
  1. as you mentioned programs like pogo, it means that you have downloaded the game and installed or you are play online?
  2. in addition, as you have said that you need to increase the font size which means the resolution of the screen, the font size of Internet Explorer?
   
  Method 1.
  After you install the update, try to update the graphics card drivers and see if that solves the problem.
  Note: Create a system restore point before you do.
  For more information see the links below:
  
  Update a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/windowsg/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/windowsg/automatically-get-recommended-drivers-and-updates-for-your-hardware
  
  Method 2.
  Also check if there are settings from the game to increase the resolution of the game.
  You can contact support (Pogo games editor) EA games.
  http://Games-Forum.Pogo.com/categories/list.page
   
  Method 3.
  Since System Restore returns to the same resolution. It is possible that one of the update is at the origin of the conflict. Install the updates one by one and check. Let us know what updates are at the origin of the conflict. If the update for the graphics driver you can ignore it. Check the hitory on this update update and remove it. See below about the same.
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-removing-updates
  
  Similar issue was also discussed on the forums of pogo:
  http://Games-Forum.Pogo.com/help/general-hints-and-tips/screen-size/3041?jforum_token=42
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported.

  Original title: Please help me

  When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported. The selected file is not valid or is corrupted. but before a few years, I used this then all files was import but now this errors can help u answer me please

  When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported. The selected file is not valid or is corrupted. but before a few years, I used this then all files was import but now this errors can help u answer me please

  =====================================
  MP3 files can be problematic in Movie Maker...
  Best bet would be to convert the files to the. WMA
  format before you import into Movie Maker.

  There are many converters available on the net... the
  the following link is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your music files on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

• only the background shows after that computer "awakens"...

  Almost every time my computer goes to sleep for inactivity and 'wakes up' once again, only the background image is visible. This doesn't mean no icons, start button, taskbar no, nonthing (there is however a slider that I can move, but I can't do anything with it). I have to restart the computer again after that, but sometimes if I let it go to sleep yet maybe once or twice (three, four...) she still wakes up with the normal icons and usability.

  Anyone know what this may be? It is extremely annoying, and if not, everything seems to work well.

  It is a gateway SX Series computer that I bought new with windows 7 at best buy for Christmas. This has happened right out of the box and did not stop. :(

  Hello

  Since this is a new computer, you should check with the help of the gateway and have it repaired as
  you make more they tell you it is something that you did. Also check with BestBuy however their leeks
  and the pics are rarely really geeks.

  -----------------------------------------------

  If you want to troubleshoot it here is how:

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.