Restriction of the user in TMS

Similar Questions

• restrictions of the user via tac +.

  Hi @all,

  I'm trying to restrict a user with Ganymede. the relevant router & tac - config are as follows:

  iOS:

  AAA new-model

  !

  !

  AAA authentication login console Group Ganymede + local activate

  AAA authentication login vty group Ganymede + local activate

  the AAA authentication enable default group Ganymede + activate

  AAA authorization commands 0 en0 Ganymede group.

  AAA authorization commands 5 RESTRICT group Ganymede +.

  !

  AAA - the id of the joint session

  !

  Line con 0

  exec-timeout 0 0

  Synchronous recording

  console login authentication

  line to 0

  line vty 0 903

  authorization orders 0 en0

  authorization controls RESTRICT 5

  Synchronous recording

  vty authentication login

  entry ssh transport

  GANYMEDE:

  user = {guck

  Login = cleartext guck

  Service = shell {priv_level = 5}

  cmd = enable {deny. *}

  cmd = display {permits worm deny. *}

  cmd = traceroute {licence. *}

  cmd = output {licence. *}

  }

  He works partially, so I can't run the enable command, but I can do a lot more "to show the worm" as expected that traceroute and more output. I can run ping so and various other commands. now, I would like to know if it is possible to restrict a user to the above mentioned commands in conjunction with Ganymede, or it does not work like that?

  TIA

  BR

  Erik

  I think that is the reason that you are able to use the ping command, because the level of command 'ping' is not authorized.

  that is by default on the IOS device, we have three levels: 0, 1, and 15.

  At the zero level, you order: disable, enable, exit, help and logout

  I think that the ping command is the level 1 or 15, you gave have not changed at the command level.

  So I would say the following,

  AAA authorization commands permission DU-VTY 0 group Ganymede +.

  AAA authorization commands 1 authorization DU-VTY Ganymede group.

  AAA authorization commands 15 VTY-authorization OF THE Ganymede group.

  line vty 0 903

  No authorization orders 0 en0

  No authorization orders 5 RESTRICT

  authorization of commands permission DU-VTY 0

  Controls 1 authorization authorization DU-VTY

  authorization of commands permission TO 15 - VTY

  And then configure the controls allowed or rejected accordingly on the profile of the user for the RADIUS server.

  Kind regards

  Prem

• Restrictions of the user through DADS.conf

  Hello
  
  
  
  I created a database user and given that the user select the only rights on certain tables in my database. Then, I set an entry DADS.conf specifying the name of user and password as the PlsqlDatabaseUsername and the PlsqlDatabasePassword.
  
  
  
  For example:
  
  
  
  create user testuser identified by testpass;
  
  grant select on my_table testuser;
  
  
  
  Then in my DADS.conf file
  
  
  
  
  
  & lt; Location/maps/apex & gt;
  
  Order deny, allow
  
  AllowOverride None
  
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  
  Docs PlsqlDocumentPath
  
  PlsqlDatabaseConnectString server.domain.com:1521:mydb ServiceNameFormat
  
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  
  PlsqlAuthenticationMode Basic
  
  SetHandler pls_handler
  
  PlsqlDocumentTablename wwv_flow_file_objects$
  
  Testuser PlsqlDatabaseUsername
  
  Apex PlsqlDefaultPage
  
  PlsqlDatabasePassword testpass
  
  PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
  
  Allow all the
  
  & lt; / location & gt;
  
  
  
  
  
  Yet, that the user still has access update to database tables that I granted only select access rights.
  
  
  
  Is there some why to control this?
  
  
  
  
  
  Don

  The user in the DAD creates the database session. For security reasons, this user should have any right other that "create session". When your application is running (using any DAD) all SQL and PL/SQL is parsed as the scheme designated as the owner or the scheme of the analysis of the application.

  Scott

• (TMS) How to change the license of the user (L-TMS-25)

  Hi, I want to know that how to upgrade travel. !

  I "order L-TMS-APL-PAK for E-Manager add TMS system 25 lic.

  But I n ' know.

  Could you tell me the way to upgrade license?

  Thank you.

  If you received this order, then it must contain an option key that enter you TMS; go to Administrative Tools / Configuration/General Settings, scroll down to 'Licenses and keys options', click on the button marked 'Add Option Key', a small pop-up window appears, enter the key and save.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• DUN connection Bluetooth for Pocket PC, Vista and the user rights restricted

  Hallo,

  I managed to establish a DUN connection to my smartphone WM5 Pocket QTEK 9100 Bluetooth-based and the Toshiba Stack, latest version. My laptop is an X 200 - 21 d with Vista Home Premium.

  Everything works although I do not change the Vista user to a user with restricted rights, for the user with the Bluetooth utility administrator rights has created a new DUN connection and a new modem with a virtual COM port. The user with restricted rights is not allowed to set up a new connection, but it is necessary to connect to the smartphone with the Bluetooth utility. On the administrative account the option button to allow the connection to call other users is disabled and grayed out, so there is sort now open it up to other users.

  How can I set up a Bluetooth DUN connection for a user with restricted rights?

  Thank you in advance!

  If the user restricted use the same DUN like the Admin Setup?

  If Yes, then you can use "Bluetooth-> custom Mode settings". This allows you to
  Select the "Standard 33600 Modem" from the list that has been set up before
  the admin. So every ONE that has been configured by the administrator can be used by the
  User restricted with this method. Restricted users cannot install hardware, so
  If the administrator has not installed a modem, then also the restricted user cannot use it.

  The Admin can pre-install a modem with Bluetooth stack installation.
  This is useful if the restricted user should be able to configure a DUN connection
  with the advanced modem settings which are not used by the administrator.

  This should be possible if the file "as.ini" has a line "MODEMINST = 1".

• Assign the PMP license to specific users without TMS

  Hello guys,.

  IM development environment of videoconferencing on my client with this specification:

  -Worm CUCM 11.x

  -Telepresence conductor XC4.0 (only 1)

  -vTelepresence Server ver 4.2 (only 1)

  My problem is im using PMP licenses, no screen. So I really confuse how to assign the license PMP to specific users.

  I already insert the driver's license, like the image below:

  

  the multiparty license on driver State said: I already have 25 license PMP but assign 0. and he said: if I did a conference call, he used license SMP, so the lack of SMP license error always come. So I need 1 license PMP connection to my user / ext to remove the error warning.

  I can do without TMS?

  If can, please help me with this.

  Thank you all.

  Best regards

  Christophe.

  The recommendation is to use use AD to import users in CUCM and TMSPE to make sure that all the same users are added.  However, you may manually create users in CUCM and TMSPE as long as the details between the two systems are the same, including the address of the video as that will identify the user as long as the host of the CMR.

• Report the user in Question TMS Cisco CDR

  Hello

  Any help with this would be greatly appreciated.

  I know that you can run the RDC in Cisco TMS user report, however, that draws its stats for all users within TMS. Is there a way to group users in a model may be to only run the report on these users?

  Thank you!

  Hello Mike.

  It is not possible to the users group when you run the CDR of the user report, it appears that all users.  The only option I see, you can do this, is to export the report to an Excel spreadsheet and manually group users as you want.

  If this is something you would like to see, you can contact your Cisco account manager and ask them to create a feature request for you.  However, with most devices that this report is based on (ie: video Jabber for TelePresence, EX60/90, E20), most to soon be EOS if not already, I doubt that they incorporate such an improvement.

• If I have two PCs used by my family, one user profile can be applied to more than one PC, followed by the cumulative on both computers use if the user has access and time restrictions?

  I wish that the user profile settings to apply to both Windows 8 computers.  Thus, if a sign of user in a PC for 2 hours and their allotted time has been used for the day, I want to assure that they are unable to connect to the other PC without asking for more time.  The same applies to time restricted access, Web sites, etc... Is this possible without two separate profiles, one on each PC?

  Hello

  Unfortunately, it is not possible to use a single user on multiple PC profile, but you can have the same set of parental controls for different user accounts.

  Multiple user accounts can have the same family safety settings.

  For information on how to set up parental control and more information about the safe keeping of children using the parental control, you can check the links below.

  Set up parental controls

  Keep your children safer on the PC

  Hope that the information provided is useful.

• Vault to Oracle set up rules to restrict the user and the type of application that can connect

  Oracle 11 g 2 (11.2.0.4.3)

  RHEL 6

  Hi all

  We are experiencing a few problems to configure the following condition:

  Users A, B, and C will not be able to connect via SQLPLUS.

  So I took note of the political examples on how to Set Up database Vault (Doc ID 972477.1() -section restrict access to the database (sqlplus) unwanted tools:

  However, it doesn't evaluate the rule in the rule set correctly. The rule set is as follows:

  DVF. F$ MODULE! = ' SQL * MORE AND DVF. F$ SESSION_USER NOT IN ("USERA", "USERB", "USERC")

  This rule allows all users to connect except those defined in the rule. And it applies also to the developer SQL (and all other connections). If I change to be 'IN' he also allows users in the list, but no one else. In addition, somewhere I think it evaluates it as "OR" rather than "AND". What I want to do is:

  IF user IN ("USERA", "USERB", "USERC") AND SYS_CONTEXT ('USERENV', 'MODULE') = ' SQL * MORE

  SO, do not allow the user to connect.

  Note: The factor (MODULE) has been created by me and her expression is SYS_CONTEXT('USERENV','MODULE')

  Any help on this would be greatly appreciated.

  I tested these rules and they work:

  (1) ((upper (sys_context ('userenv', 'module')) like '%%') and (not in sys_context ('userenv', 'session_user') ('A', 'B'))) or ((upper (sys_context ('userenv', 'module')) like ' % %') and DEVELOPER (not in sys_context ('userenv', 'session_user') ('A', 'B'))))

  (2) ((upper (sys_context ('userenv', 'module')) not like ' %PLUS%')) or ((upper (sys_context ('userenv', 'module')) not like ' % DEVELOPER %'))))))

  I'm blocking users A and B to connect from SQL * more and SQL Developer

  -set the rule defined for all THE TRUE evaluation

• Is their any restrictions on the total facilities of cloud creative app after purchase of the monthly subscription for each user?

  Is their any restrictions on the total facilities of cloud creative app after purchase of the monthly subscription for each user? For example, an application may not be installed on more than 1 computer. (Or it will break the policy of licensing or software etc.) ?

  1. You can install the software on as many computers as you want
  2. You can activate the software to be used on a maximum of any two computers at the same time
  3. You can only use one of the simultaneously active installations.

• I want to restrict the user manual release of the HOLD in the sales order

  Hello

  I want to restrict the user manual release of the HOLD in the sales order

  Hello

  Please use below the installation program

  1. go in responsibility: responsibility of the order management Super user.

  2. go to the Set up > order > holds > define.

  3 ask the wedge which has already been set.

  Assign at least a responsibility to a particular action as shims to apply or release, and then only hold permissions will take into account.

  4. after installation above this shim is not in the LOV when connecting other

  responsibility

  Thank you

• Possible way is to restrict the user to the planning an application

  Hello Experts,

  I have a requirement as I want to restrict bit user related to the demand for labour in the planning depends on business unit and product.

  that is... The test user could not access of the user to the company as an employee depends on some operational units and related products. So is it possible to do outside the [Chronicle] manual process.

  Thanks in advance...

  Are you just wanting to restrict access to specific members to enter data to or it also includes being able to 'see' only the data based on some examples.  For example, in the type of financing plan, I have write access to the Dept 123 for all accounts of actual Net profit, I want they have read access to this Department?  In this case, I would make sure that specific effective accounts, that I make sure that the user/group has only read access.

  Thank you

  Mark

• Restrict the user to repeat a course after 24 hours

  Once the user does not have a class, then I would block during 24 hours, and after that this user restrictions can re-attempt of course failed. As I understand it, that is, there should be a user variable that would communicate with the LMS and tool Publisher SCORM. This variable must control the State of restriction. By any chance someone can give an overview of the generic user variable required. Or I'm all ears if there are other ways easy to address this scenario. Currently we use so that internal editor SCORM LMS, but the variable required should be generic in nature, right?

  You have to watch the LMS, I don't see an easy way to do it within Captivate at all. Perhaps with JS, but not sure

• How to restrict the user to enter not same value in a table

  Greetings!
  
  I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.
  
  It was: I have created a table, as shown in the example.
  
  I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.
  
  for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...
  
  http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:
  
  It's all done on typing submit prior to registration.
  
  Please drivers

  Hello

  I m asking a second time the upfront because I did not answer preivously, so please don't mind if it's a double.

  It was: I have created a table, as shown in the example.

  I want to validate the user name that you see in my example to restrict the user to enter the same value in the user name field before submitting page.

  for example when the user enters data as u see test in user name in the first row, when it goes to the second row and type same username as test "message will appear or restrict the user who has already typed or in use"...

  http://Apex.Oracle.com/pls/Apex/f?p=45296:1:22797340776918:

  It's all done on typing submit prior to registration. >

  Stick the code below into the Page header > Javascript > run when loading the Page field.

  $('[input[name="f03"]').blur(function(){
    if ($('input[name="f03"][id!="'+$(this).attr('id')+'"]').val() == $(this).val()) {
       alert('Duplicate Entry.');
       var x = $(this).attr('id');
       setTimeout("(function(p){$('#'+p).focus();})('"+x+"')",100);
    }
  })
  

  Note:
  a.F03 is the 'name' of your column of username in the form of tables.
  b. This only valid values. If your tabular presentation has multiple pages then all of the rows are not currently displayed will be ignored.

  See you soon,.

• How to restrict the user to enter data into the PLUGS DO

  Hello
  
  I textinput in my page, I have to restrict the user to enter the data covers only.
  
  can someone help me on this.
  
  Knockaert

  Please go through this site.

  http://oracleanil.blogspot.com/2010/10/restrict-user-to-enter-data-in-caps.html

  Concerning
  Meher Irk