Restrictions on access to URL blocking works not

Similar Questions

• Work of fine WebLogic Server machine url same p6 eppm primavera also works in server but the client lan both URLs machine works not

  Work of fine WebLogic Server machine url same p6 eppm primavera also works in server but the client lan both URLs machine works not

  When I install weblogic and eppm works in client machine only 10 minutes after does not always work in Server

  Thanks for the reply,

  I solved that

  Eppm proxy server is enabled, so I remove the proxy in internet option, it works very well in all the URLs of web client machine p6

• Power of fire-URL blocking - how to see the hosts?

  Hello

  I work with the implementation of a system of firepower on an ASA5525X. I activated the blocking of certain categories of URL, it works fine and I can see that a number of classes of forbiddel connections is arrested. But how it go down and see what internal hosts attempt to access the URL forbiddel? Standard reports or dashboards that gives this information?

  Kind regards

  Thor-Egil

  Hello, what are you using for the configuration of the module of firepower? ASDM or firepower Management Center (FMC)? In WCF, you can get detailed information about each transaction in the tab analysis-> connection-> events. Please, see the attachment.

  But first, you must configure journaling in access policies.

• JavaScript alert unauthorized access to < url >

  I get this error message and don't understand why I get it because I think that I put in the access parameter in my config.xml file correctly.  Here's the relevant section of the config.xml file:

  ================

  <>ermissions >
      <>Ermit > access_sharedermit >
    ermissions >
   
   
   
   
   
   
   
  ================

  There seems to be a lot of messages saying this:

  http://www.Sencha.com/Forum/showthread.php?268724-access-to-quot-CDN.Sencha.com-...-Sencha-touch.CSS...

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/JavaScript-alert-URL-not-allowed...

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/js-popup-access-to-URL-not-allow...

  Here's what the error looks like:

  

  FYI, which actually look like this doesn't work either: Pei

  
     
   

  <>ermissions >
      <>Ermit > access_sharedermit >
    ermissions >
   
   
   
   
   
   
   
   
   

  I posted this on the forums of Sencha so.

  The issue was that is not a URI (I thought by specifying that it this way will automatically get the SSL and non - SSL URLs):

  It works:

  And this also works:

  subdomains of http://CDN.Sencha.com"="true"/ >
    subdomains of https://CDN.Sencha.com"="true"/ >

  But still weird that this great substitution does nothing... you would think that it would help:

  
     
   

• Cannot access the API blocked

  I created a web application bb factory using the web works for Visual Studio plugin. I tried to install the application and got the error cannot access the api blocked. I researched and found that the fact of not having signed app can cause this error. I followed the instructions that comes with the plugin on the signing of the app.

  • In Microsoft® Visual Studio®, on the Tools menu, click on install BlackBerry signing key.
  • Navigate to the folder that contains the file signing key (.csi).
  • Click OK.
  • Type the PIN registration and the password for the private key.
  • Click Save.
  • When the success dialog box appears, click on exit.

  When I try to install the application, I get the same error message. Do not install the key and sign the application correctly? Help, please

  Have you installed all the three keys?

• Add the restriction of access to the file – cannot open / view the files more

  I added a restriction of access to a particularly important issue. But so all the files inside are now either opening. I get a prompt this unknown format - or bad file descriptor, or can not read file header etc. What should I do? Help, please

  Hi Abhay,

  1. What is the complete message you receive?

  2. where is this file?

  3 is confined to a particular file? What kind of file is it?

  4. your computer is on a domain?

  5. have you limited access for reading and writing?

  This problem can occur if the restriction of folder is not set correctly.

  We can refer to the articles and check if it helps.

  "Access denied" or other errors in the access to or work with files and folders in Windows

  How to open a file if I get an access denied message?

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• With regard to the update system - restriction of access to records admin app

  Regarding the system update in this thread to update system - restricting access to folders app admin , I can not answer in this thread because I'm not a mod and there is no reply button.

  My question concerns the public record, what we do with it?

  S ' there is a placed file in it can it use liquid?

  - I assumed that the front-end server can access this directory, but (from the front end) we won't be able to use the new API v3?

  - Other applications access to the updated files? That is to say. He says in public, it is that? It is not safe at all in other words?

  -Is the case more as a temporary workspace or the (public) long-term storage? Can other apps delete files there? That is to say. I might need to make sure that a file exists before you assume it's there.

  Hello

  1. The files in the folder admin app can run modules and liquid (if you do not use another library of client-side library which is in conflict with the liquid syntax)
  2. Yes, front-end can access files on this folder (you cannot list the contents of the folder of front end) and you can access the REST API using module_data; direct access to the API is not possible, because you will need to be authenticated
  3. Yes, other applications can access the files put there, same as possible that nobody knows the URL of the page
  4. It is a public storage for long-term applications. Apps cannot delete files in other folders for apps, but they can read;

  Cristinel

• Make a custom page when you access the URL of the root of a Web application

  A BC blog post says it's now possible to "make a custom page when you access the URL of the root of a Web App site. For example, if you have a "blog" Web App, items can be made available to/blog/my-blog-post, and you will be able to customize the page/blog"

  Is this possible? It doesn't for me due to unique URL problem yet.

  For example the web page is / banksy - Guide of Banksy

  But web app components must be on/banksy/web-app-item but need to change to/banksy-editions / Banksy choose your weapon (green) | Gallery hang up Banksy Guide

  I don't see any documentation, support BC do not know and ask me the Forum to discuss. Someone at - he found a workaround?

  Thank you

  Paul

  You have a page with the same name as you want for the web application folder.

  1 remove this page from banksy (Dungeon of backup of your content)

  2. change your url web app for /banksy you need

  3. create a folder called /banksy (it will allow you to make a folder)

  4. create an index.html in the folder of Banksy page - put your content to the page that you deleted here

  You will then have an index for the file page and the web application will work...

  /Banksy - index page

  /Bansky/ - index page

  /Banksy/index.html - index page

  / web banksy/something - point app

• Cannot access the URL 12 c

  Hello
  
  I installed 12 c successfully. Also able to access the URL from the same server.
  But trying to access the URL of the remote servers using IE7 does not work.
  
  What could be the possible causes?
  
  -Paul

  Hi Paul,.

  + You are able to access the URL of the server where it was installed and not been accessible from browsers on other servers. There is a possibility this Linux firewall.
  + Please do the following on your server where 12.1.0.1 Cloud Control has been installed:
  1. log in as user root.
  2. stop /etc/init.d/iptables #.
  + Now, try to access the URL of the browsers on other servers.

  Best regards
  Vincent

• License restrictions impede access to this address.

  After the CF7 updated to the new DST requirements, we are seeing INTERMITTENT problems with some being not loaded SWF movies.
  
  Flash forms work fine.
  Any indication to examine how would be fabulous.
  
  ColdFusion - err.log shows:
  03/13 15:47:48 Proxy Servlet ERROR: license restrictions prevent xx.xx.xx.xxx access
  03/13 15:47:48 ERROR Proxy Servlet: authorized addresses: [{71.218.19.250} {192.168.1.145} {74.93.23.77} {24.131.24.127} {192.168.1.1}]
  03/13 15:47:48 error Licensing restrictions prevent access to this address.
  java.io.IOException: license restrictions impede access to this address.
  at flex.services.license.AddressRestrictionFilter.invoke(AddressRestrictionFilter.java:28)
  at flex.server.j2ee.cache.CacheFilter.doFilter(CacheFilter.java:165)
  at flex.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:66)
  at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
  at jrun.servlet.FilterChain.service(FilterChain.java:101)
  at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
  at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
  at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:318)
  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:426)
  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:264)
  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  It is not a J2EE installation. It is installed standalone on IIS6.
  Anyway, Jrun is ultimately rejected deploy cfusion on the launch of the service.
  I completely reinstalled the full install of CFMX.

  Thanks anyway.

• Windows asks for a password when you try to access to the "view work group computers."

  We are on a network.  Main computer, that we can access through the receptionist connect you and access shared files on this computer.  Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers."  We tried to use its password.  However, the shared files are still not accessible.

  Hello

  1. what happens when you enter the password?

  2. how many computers are connected to this working group?

  Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  I hope this helps!

• If I remove the Reaktek RTL 8139/801 x program Fast Ethernet NIC family in my PC it will affect my internet access even if it is not make it now

  If I remove the Reaktek RTL 8139/801 x program Fast Ethernet NIC family in my PC it will affect my internet access even if it is not make it now and apparently it works either way because I get a message that it is unplugged and I tried to fix and it tells me to insert a cd, which I did not.

  Hello

  You must have the drivers for the RTL 8139 NIC - you can download it from the Web to Realtek site - here is the link:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  LC

• Get messages "Malicious URL blocked" avast all few seconds

  I have Vista Home Premium, 32-bit, Service Pack 2.   Since last week, I get the message from Avast: 'Malicious blocked URL' popping up every few seconds.  2 Commons are "hxxp://oldschoolzz.ocm/x/" and "hxxp://newgenerationp.com/x/".  I ran all the scans of security of Microsoft, Avast, Malware Bytes, somethng called aswMBR and divert it.  I also did some scans boot. I ran newspapers of them and so far support Avast tells me that they can't find any virus or infections.  There were moments where I scan and horses Trojan or register of items here.  Can I remove them, but right now when I reboot, I get these pop - upd again.  I've also restored to a point before this happened, but it does not solve either.  Sometimes it comes even to the top when I'm not on the internet.  Any other suggestions besides reinstalling Vista: (.)  Any other suggestions.  Please let me know if you need other information.  Thanks for any help!

  Malware blocked URL pop up by Avast seems to be a problem these days with many of those who use Avast.

  More online forums are flooded with questions about this mysterious pop-up.

  It is a virus or a false positive alarm by Avast?

  A glitch Avast?

  If virus why it not detected by antivirus/anti- malware programs?

  Why the Avast is so quiet about it?
  http://www.bleepingcomputer.com/forums/topic456361.html

  http://www.google.com/search?q=%22Malicious+URL+Blocked%22&sourceid=ie7&rls=com.microsoft: en - us: ContextMenu IE & oe and ie ==.

  UTC/GMT is 20:22 Saturday 16 June 2012

• AppPortal error: remote access to the server is not enabled

  I'm lost on this one.

  Using the full client of AppPortal on a Win7 64 bit machine (version 8.0 of the customer)

  Double-click the icon, download authenticated - published applications show, then double click a published application, the end user receives:

  Remote access to the server is not enabled.

  This happens only on a single computer

  From this profile of users on the given computer I can MSTSC on the same server without problem

  The error also follows the profiles on the given computer.

  I have closed the Antivirus and Windows Firewall and still can not get this to work.

  Even uninstalled and reinstalled the client.

  From my computer, I can easily log in as this user.

  Customers get automatically configured through an XML file.

  After installation, I tested this laptop and he always gave the same error.

  I ended up him to give me the phone for a few hours.

  Uninstalled the version that was there (build 8.0.0.forget) and scoured the Windows Explorer for all left overs (a little here and there in user profiles and delete).

  Then scoured the registry for expressions; vWorkspace, Quest Software and Provision Networks and remove all instances

  Reinstalled all THE SUCCESS with the new connector to our servers (8.0.306.1427)

  Thanks for the help Dave

• How to access a URL in the BB device 10 Apha

  Hi guys,.

  I want to know how to access the URL of the browser in BB 10, I'm not finding the tab URL, where I can type the URL, any info about BB 10 aplha device will be useful.

  Concerning

  Rakesh Shankar.P

  You have to slide the screen from the top down, from the top of the screen to the bottom of the screen and you will see that the url bar appears again. If you want to enable the preference that the url bar is always visible, there is a toggle switch on the toolbar, you can activate in the opposite State, in which it is currently.