Results of the shared browsercontent.getDisplayableContent () in several fields

Similar Questions

• How to use the shared variables to address several Watlow controllers on the same COM port

  Hello

  I am using LabVIEW 2010 to control 4 Watlow temperature controllers on a port com 3 are model 96 and 1 is a zone EZ controller. The controller has a unique modbus address and I'm trying to read from and write in the individual records (for example, setpoint closed-loop) variable shared help. I would return the data during playback (even if the data is displayed as invalid), but I am unable to change the value in the registry in writing. How can I be sure that's the Modbus server send commands to the correct controller?

  Chuck

  Hi Chuck,

  Sorry for the delay in response, I was away last week. You can create as many servers for Modbus on one COM port that you would like, the only problem you'd see is if you tried to call the port from different locations at the same time. With respect to the documentation to cross, I'd start with the tutorial below for a comprehensive manual of Modbus. There are also quite a few listed under Datalogging and supervisory control Module help topics that may be useful if you want to solve specific issues.

  Introduction to MODBUS

  Kind regards

  Peter W.

• What is the character of max selections several fields?

  For fields that are set up to use the lists of multiple selections and can have many values added to the field, which is the maximum number of characters that the field can contain? And, if a field hit the max, will we ever know?

  Thanks for any help.

  Beth

  Hi bmherr,

  Small text fields have a maximum of 100 characters, while the large text fields supports up to 32,000 characters.  For multiple-selection list text fields, the limit is 1000 characters.  For data cards (Custom Data Objects): 250 for small text fields and 32,000 for great text.

  No, it won't show error, and only the first 1000 only characters will be stored in eloqua!

  Thank you best regards &,.

  Barone

• JavaScript - results of the function to return to a field

  Hello!

  (Again), I'm trying to understand how to work with a JavaScript function in LiveCycle Designer - without success.

  I've got this textfield and a body of numbers calculated.

  I use the textfield object calculate event to call a function and removes a returned value.

  Thus, the name of textfield is full and the calculate event code is as follows:

  Form1. #subform [0]. extenso::calculate - (JavaScript, client)
  this.rawValue = utils.porExtenso (total.rawValue);

  It is the porExtensofunction:

  Form1. #variables [0] .utils - (JavaScript, client)
  function porExtenso (c)
  {
  Return c.rawValue;
  }

  I have alreadty tested the variable c and value is received correctly inside the function, but it is not back to the field.

  Please, what am I doing wrong?

  Thanks for the tips!

  Marcos

  You would not c.rawValue because the rawValue method applies to xfa objects. c is the javascript variable that contains the value passed so you would simply use c back

  Paul

• Hide/show several fields via the Radio button

  Hi all

  I use the script below on an option button to hide and display a field on a form. I also want to use the same button to control another field named 'instructions for lbl_dynamic' The Acrobat forms book I use as a guide does not address the hiding and showing of several fields at the same time. My attempts to add the second field have failed. How can I change the script to control two fields instead of one?

  Thanks in advance for any ideas on that.

  var lst_dynamicFld = this.getField ("lst_dynamic")

  If (event.target.value == 'Yes') {}

  lst_dynamicFld.hidden = false

  }

  else {}

  lst_dynamicFld.hidden = true

  }

  'hidden' is obsolete, which means that in the next version of

  Acrobat/Reader, your script could no longer works if you use it.

• don't forget the select result of a statement to be used several times in the procedure

  Hi all

  I'm sorry for this kind of question, I'm not newbie, but still need your help.

  My need is remember the select result of a statement to be used several times in the procedure.

  My first guess is to use a temporary table, but I think there's better decisions.

  For example, I should make a heavy request

  Select the code from table_function (param1)

  Then, this query is used to insert a list of the id in table1, delete table2 and update in table 3.

  Help me please do not use if possible temporary tables.

  If there is more than one column, you need to create an object type at the database level. Create a collection of this type of object in the procedure.

  Example:

  CREATE OR REPLACE TYPE "OBJ1" as OBJECT(
          column1 varchar2(256 CHAR),
          column2 varchar2(35 CHAR)
          );
  
  CREATE OR REPLACE TYPE "nt_obj1" as table of OBJ1; -- this could be done at procedure level as well
  
  DECLARE
     t_employee_ids   nt_obj1;
  BEGIN
     SELECT OBJ1(column1,column2)
       BULK COLLECT INTO  t_employee_ids
       FROM table1
      WHERE column3 = NNN
  .............
  .....
  

• 3.0EA1: display of several results of the query in a spreadsheet

  Hello Forum,
  just after starting SQL Developer 3.0EA1 for the first time, I had a new tab for each SQL query result I entered in the worksheet. This is a great feature!
  But now I can not reproduce this behavior. All SQLs put their results into a single query result tab. The last of them wins.
  I have not found a preference setting to return several results of the query again.
  Did I miss something?
  I'm running on Windows XP and updated the parameters of 2.1.1.64. Perhaps that explains the rescue of the old behavior afer restart SQL Developer.
  I connect to Oracle 10.2.0.5 if it matters.
  
  Kind regards
  dhalek

  Preferences - Database - spreadsheet - automatically freeze the tabs of the result, or red pine under the result tabs button themselves.

  Have fun
  K.

• Workgroup Windows 7 - can see the folders, but not files in the shared directory

  I have three windows on the same workgroup machines (2 machines Windows 7 [A, B] and [C] XP machine). I have a shared folder on the [A], with many subfolders. When I created first the part, [B] has been able to see all files and folders in the shared directory on [A]. Next, I added several subfolders on [A]. Now, [B] can see new subfolders but not the files in the breast. Why is that happening and how can I solve this problem?

  [A] and [B] are capable of full access to the shared folders on [C]. The permissions on the shared folder on [A] are set to "Everyone" + read/write. I tried several reboots of each machine. Hit "Refresh" on [B] does not make the files appear. It is not password-protected. It turns out that [C] has exactly the same problem as [B], that makes me think there is something to do with the share on [A], but I can't understand it.

  On [A].

  Under sharing advanced > caching, I chose only "the files and programs that specify users are available in offline mode."

  Under [advanced sharing] > permissions, "Everyone" is given full control, change, and read them.

  Under [advanced sharing] > permissions > Add > locations, machine [A] is visible, but are not machines [B, C].

  Any thoughts? Thanks in advance!

  Hello

  Thanks for the reply and keeping the status updated.

  There are options of shares with different depending on whether your PC is connected to a network and what type of network is.

  To share the points with a particular person, choose the account of this person.

  To share with all members of your home group, choose one of the options Group of the House .

  To select libraries to share with all the members of your home group, swept from the right edge of the screen, tap settingsand then tap Change PC settings. (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, click settingsand then click change PC settings). And then tap or click home group.

  To prevent a file or a folder shared with anyone, press or click the share tab and then press or click stop sharing.

  To change the level of access to a file or folder, press or click on the sharing tab, and then select Home group (view) or collective (view and edit) home.

  If you need to share a location such as a disk or system file, use the Advanced sharing option.

  Change the settings for network, file sharing discovery, sharing public folders, sharing protected by password, home group of connections and file sharing connections.

  To turn on network discovery, file and sharing printers, and public folder sharing in Windows 7

  Control Panel > network and sharing Center > change advanced sharing settings > public folder sharing.

  -Turn on sharing so anyone with network access can open files.

  -Turn on sharing so anyone with network access can open, change and create files.

  Hope this information is useful. Just reply with the results. We will be happy to help you. 
  

• Are constants of body of the PL/SQL Package in the shared or private area

  Based on that it is not clear to me if body Package PL/SQL constants are stored in the shared or private area.
  
  http://docs.Oracle.com/CD/B28359_01/server.111/b28318/memory.htm
  
  "PL/SQL program units and the Shared Pool
  
  Oracle database treats PL/SQL program units (anonymous blocks, procedures, functions, packages and triggers in database) much the same way he treats the individual SQL statements. Oracle database allocates a shared area to hold the shape analyzed, compiled a program unit. Oracle database allocates a private space to hold values specific to the session who runs the program unit, including local, global and package variables (also known as the package is instantiated) and stamps of SQL execution. If more than one user is running the same program unit, a place unique and shared is used by all users, while each user runs a separate copy of his own private SQL area containing session-specific values.
  
  The individual SQL statements contained in a PL/SQL program unit are processed as described in the previous sections. Despite their origins within a PL/SQL program unit, these SQL statements use a shared area to hold their analysed representations and a private space for each session, who executes the statement. »
  
  
  I am also curious to know what are the differences in fine grain in a perspective of memory and performance (multisession) for the two examples below. One is more effective?
  
  
  Example 1.
  
  create or replace
  package body
  application_util
  as
  
  c_create_metadata constant varchar2 (6000): =...
  
  procedure process_xxx
  (
  )
  as
  Start
  ...
  end process_xxx;
  
  end application_util;
  
  vs.
  
  Example 2.
  
  create or replace
  package body
  application_util
  as
  
  procedure process_xxx
  (
  )
  as
  
  c_create_metadata constant varchar2 (6000): =...
  
  Start
  ...
  end process_xxx;
  
  end application_util;

  881398 wrote:

  But I still have to ask because it seems still more particularly in example 1 that the constant can be attributed to the use that the actual value could be a pointer to a constant string value in a table of symbols or something related to the compilation unit. I'm always curious in a perspective of management of memory if there is a difference between the example 1 and example 2, and if one is better and why.

  The storage is real, references to this storage internal to the PL/SQL engine. And irrelevant to the PL/SQL programmer.

  This question is really a disagreement over the shape is better: example 1 or example 2. I prefer the 1 example, for readability, testability, etc., and so the question is where is the performance of the memory/differences and or is it just preference of developer.

  I agree with rp0428 - he raised a very important point that it is a problem of scope and nothing else.

  Basically is there any trade-off between using one shape on the other insofar as the performance and memory management?

  Not really. Most runtime engines release not just actual system memory when a variable is out of range. the malloc() calls are expensive. Free() calls are expensive (and are not always the result in usable free memory which can be malloc'ed again).

  Several execution engines use what is called a managed heap. A malloc is made of a new process when it is initialized. The heap memory / managed malloc'ed is adjacent. Pointer allocation of memory for this process is initially pointing to the base of the managed heap. As the process allocates / uses memory, the pointer is moved just advance in the managed heap, which indicates the HWM as such - the beginning of the 'free' memory in the heap. Allocation is sequential.

  Reset of your variable execution, or releasing your runtime object, does not reset the HWM as other objects/variables can still be used and located after this place in the bunch. In this case set him free memory by releasing / resetting the language variables does not restore the kernel memory.

  Memory management is a sophisticated process entirely processed by the engine running - and best left to the runtime engine. As you as a programmer do not explicitly control the memory management, it is not a good idea to try to write code that artificially attempt to use 'better' for the runtime engine memory management. The next version of the runtime of that aura of new features, optimizations and so on — and your interference in your code to get the "valorisation" of memory can happen just bite you not bad after an upgrade to execution.

  Regarding the performance aspect - variable initialization is dependent on scope. In order to have a global scope means a one-time initialization, whereas a private scope (created each call) is a multiple unit. If the first is a little faster than the latter.

  However, the performance differences are tiny - IMO too small to justify this as a valid consideration to spend in addition to the decision of functional design on what possibilities a variable or a constant need to have.

  SQL> create or replace package FooLib1 as
    2          procedure Exec;
    3  end;
    4  /
  
  Package created.
  
  SQL>
  SQL> create or replace package body FooLib1 as
    2          const1  constant varchar2(32767) := rpad('-',10000,'-');
    3
    4          procedure Exec is
    5                  var1    varchar2(32767);
    6          begin
    7                  var1 := const1;
    8          end;
    9  end;
   10  /
  
  Package body created.
  
  SQL>
  SQL>
  SQL> create or replace package FooLib2 as
    2          procedure Exec;
    3  end;
    4  /
  
  Package created.
  
  SQL>
  SQL> create or replace package body FooLib2 as
    2          procedure Exec is
    3                  const1  constant varchar2(32767) := rpad('-',10000,'-');
    4                  var1    varchar2(32767);
    5          begin
    6                  var1 := const1;
    7          end;
    8  end;
    9  /
  
  Package body created.
  
  SQL>
  SQL> set timing on
  SQL> exec for i in 1..100000 loop FooLib1.Exec; end loop;
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.28
  SQL> exec for i in 1..100000 loop FooLib2.Exec; end loop;
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.74
  SQL> 
  

  A second difference 0.0000046 in a single execution for FooLib.Exec between the use of package for the constant scope, against increased private. Which means that the issue of the scope is not a decision of the performance. Not when improving performance overhead is 0,0046 millisecs.

• How do to add the first cell not empty in a row - with results in the order reverses

  A few months ago Wayne Contello solved my initial question about how to add the first non-empty cell (text) in a row where I am inputing several phone numbers and email address.

  The link is below-

  Re: How to add the first non-empty cell (text) in a row

  What I'm looking for now is for the results in the "I - K" columns (each title, "First", "Second", third"in the table) to be in reverse order.

  In other words, I want results in the column 'Third' (K) to appear in the first column (I), "Second" can stay second and the column 'First' (I) be listed as the last column (K).

  I don't want to change the order of the phone 1, 2, 3 and send columns (A, B, C and D respectively) if possible.

  Any help would be appreciated.

  Thank you!

  is to add more than three columns and see the original formulas that I posted in the other direction... like this:

  

  L2 = K2

  M2 = J2

  N2 = I2

  Select L2 thru N2, copy

  Select the L2 cells at the end of the N column, paste

  now to hide columns I thru K selecting the three column, then using the menu shortcut for columns:

  

• Where can I register for the sharing of the family?

  I can't find where I can register for family sharing.  I have connected to my account iCloud as the person who will be responsible, and I don't see an option in the settings.  With the help of family sharing stuff would be appreciated. I have 2 teenagers with their own accounts iCloud and an elementary kid who we do not want to constantly make additional funds for applications and music, that someone has already purchased in our family.  Thank you.

  Here are several links that will tell you all about the sharing of the family.

  Family sharing

  Family sharing and Apple ID for children

  A Guide for family sharing - iCloud

  Sharing content with the sharing of the family bought

  iCloud - family sharingrt

  Implement the family sharing

• ATEs by using the shared but sequence having separate databases

  They just showed me two ATEs that use a common test sequence stored on a network server.  It is desirable that both connect their results to different data bases MS Access, but changing the connection string Expression to an ETA updates the Database Options on the other.

  Is it possible to share a movie file, but newspaper results from each ATE in different databases?

  

  Hi Jim,.

  To do this, you can add the ProcessModel DatabaseOptions callback sequence to the same sequence as your MainSequence file, and then programmatically set the Parameters.DatabaseOptions.ConnectionString based on who ATE called the shared sequence. This assumes that your shared movie file uses a process template.

  -Jack

• Get the result of the sequence by programming

  Hi all

  in my custom operator interface to save the event EndExecution callback to accomplish several final operation.

  What I can't do is to retrieve the result of the sequence ('Success' or 'Failure', exactly the one that is displayed in the default report under the voice "Result USE") using methods or properties API.

  I've tried Execution.ResultStatus property and the SequenceContext.SequenceFailed property, but none of them works.

  How can I get the result of the sequence?

  Thank you

  Process templates are already generating a Message from the user interface "TestingComplete" you can register an event reminder on.  It also transmits the result as part of the parameter string State.  The attached excerpt from LV show what the VI recall may contain to handle the event.  If you need to deal with other UI event codes you can wire the event directly number in the structure box for the 34 decimal 'TestingComplete' event code.

  P.S., the event is the same that Norbert has pointed out, event UIMessageEvent...

• Unable to load the shared library LVASPT_WA.*

  Hello

  I have a hope that easy to fix the error: I want to use the function "WA Detrend' to the signal processing tool advanced in a real-time application running on a cRio 9030. When I try to run the VI I get the following error:

  ...

  Deployment NI_AdvSigProcWA.lvlib:WA decimation Filter.vi

  NI_AdvSigProcWA.lvlib:WA decimation Filter.vi loaded with errors on the target and was closed.
  LabVIEW: Unable to load the shared library LVASPT_WA.*ptDecimationFilterH:C. make sure that the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  ...

  I reinstalled signals Advanced processing toolkit and linked things 'add new software' MAX, but the error persists.

  A picture of what the system looks like to the MAX is attached.

  Also, I Fund this post:

  http://forums.NI.com/T5/LabVIEW/problem-error-deploying-item-on-RT/m-p/3201345/highlight/true#M92822...

  could someone tell me what he means by "Please check the installation of the custom software all mode '?

  Can you telll me what I am doing wrong?

  Thank you very much in advance!

  I ran your situation in R & D, and the problem seems to be as a result of Advanced Signal Processing Toolkit is not not compatible on the x 64 under Linux RT OS in the 9030.  The product page could be clearer on this gap.  I am currently a web application to get this fixed!

  Best,

  David

• Support of the shared Variables in the third part XP embedded based of PTC?

  I sent a request in an embedded XP touch function (third party). The application works very well, but hosted on a RT (sbRIO Board) shared variables are not getting updated in the app on PTC

  1. the PTC is part of the project as a Windows XP Embedded Touch Panel

  2 NI TPC Service has been installed on the PTC and the application can be deployed remotely from the PC development via ethernet. (Where network connections and communications are OK)

  3. using distributed in the development computer systems manager, I can see that the shared variables are getting updates on the network

  I think that the problem can be solved if the following programs are installed on the TPC

  A. Support for variables that are shared for XPembedded

  B. shared Variable engine

  I tried to install the support of variables shared Program Files > National Instruments > Labview 8.6 > PDA > utilities > Variables > x 86 - but I get an installation error "cannot find the application for the Pocket PC applications Manager.

  Shared variable engine was installed from the ve220 folder. The program is installing. But the engine Variable is not start Control Panel > administrative tools > Services, Xpe, the service is stopped and cannot be started. When I try to start the service, I get the following error on PTC

  "Cannot start Service engine of National Instruments Variable on the local computer."

  Error 1053. Service has failed to demand launch or timely control.

  Please suggest solutions to the addresses above or another of the following:

  1. support of variables shared for XP built-in PTC

  2 Installer engine Variable shared.

  Thank you

  Krish

  Problem solved!

  Update for interested people working on XP Embedded PTC

  Just to ensure that shared Variables were indeed accessible to the TPC, I wanted to install Distributed Systems Manager 8.6 on the TPC. However given that the TPC was only 1 GB of DOM (disk on memory) and with all the software that I had tried, there remained only a few megabytes on the system. I had to add an another DOM of 2 GB.

  All products in the Installation went well, with the exception of the Logos NOR (Version 5.0). Logos OR installation has failed repeatedly.  I tried to install NI Logos separately, with the same results. Then I had this intuition that NI Logos had anything to do with the question.

  Then, I downloaded the new version of NI DSM 2009 SP1. Even if it were to settle on any fresh system without Labview, the installation would not proceed beyond the stage of configuration. I tried to install NI Logos of the folder on the download of new products separately and it worked magically!

  Once the new Logos (Ver 5.5) installed, the Shared Variable engine starts automatically and the shared Variables are finally unleashed - free stand up and shine! I thank Almighty God!

  On the lighter side, come to think of it - to run an application about 400 KB, we need NEITHER of Run Time, XP embedded, DSM, Logos...  (around 900 MB). Can make us everything simpler?  Invite your comments...

  Thank you

  Krish