Settings of Microsoft

Similar Questions

• I want to change my computer settings that Microsoft word is the program of preferred instead of microsoft Works word processor.

  Whenever I try to open a document, the computer tries to use the works and some times it will not open the document.  How can I change the settings so that I don't have to use the works at all. It is subpar.

  Hi windywillia60,

  Change the default settings for the program, please visit the links below: change which programs Windows uses by default:http://windows.microsoft.com/en-US/windows-vista/Change-which-programs-Windows-uses-by-default

  Change default programs using Set Program Access and computer defaults:http://windows.microsoft.com/en-US/windows-vista/Change-default-programs-using-Set-Program-Access-and-Computer-Defaults

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Settings for Microsoft Keyboard Elite for Bluetooth model 1002

  I installed this on my computer and everything except bluetooth keyboard the 'My Favorites', 'View favorites', 'My Documents', 'Pictures', 'My music', 'Mail', 'Messenger' keys, multimedia keys and the scroll keys, and the arrow on the left side of the keyboard very well work. These exceptional keys above do trigger response (for the multimedia keys, that those who control the volume of work). Usually in this keyboard settings it would be options to define things for the keys of access fast and a lot more settings, but they do not exist on this computer. The driver for this keyboard is not properly installed on this computer? Please meet in the coming days!

  Thank you very much.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing some problems with the Windows 7 system.

  Try to uninstall the drivers for the keyboard and then reinstalling the drivers and see if that helps.

  Follow these steps and check if that helps.

  Step 1:

  Try to remove and then reinstall the keyboard. Here's how:

  First, connect a wired keyboard or mouse to your computer. So, if you have Bluetooth wireless technology installed on your computer, follow these steps:

  a. click the Start button, select Control Panel, click hardware and audio , and then click Bluetooth devices.
  b. Select the keyboard that does not work, and then click on remove.
  c. click Add, press the reset button on the bottom of the keyboard or the mouse, select the device is set up and ready to be found check box, and then click Next.
  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then click Next.

  e. Exchange of security with the keyboard keys. Follow the remaining instructions in the wizard.

  Step 2:

  Follow all the methods listed in the section below and check if it can help solve the problem.

  Resolve the failure of mouse or a Bluetooth keyboard to function
  http://support.Microsoft.com/kb/811798

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• iTunes will not retain the preferences or settings when Microsoft Security Essentials is enabled/activated

  When I disable the MSE, iTunes keeps all my settings.

  When I activate the MSE, iTunes to reset all my settings to its factory default settings. so when I disable MSE, redo my personal iTunes settings, close and restart iTunes everything is OK.

  When I reactivate my MSE, the problem starts again.

  I use Vista Home Edition with the latest updates.

  What should I do?

  Thank you!

  Hello
   
  I suggest you to contact the Apple support on this issue, then follow link below:
  http://www.Apple.com/support/iTunes/

• Can configure is no longer Windows Vista update to include the updates for other Microsoft products (Office, Visual Studio, etc.).

  I once had a problem with Windows Update, which gives me a family of .NET Framework through the window of Control Panel\Windows to update to Windows Vista, even if it has been installed and has Microsoft support help me through EasyAssist. The problem of .NET Framework has been fixed, but now I have a problem: the Control Panel\Windows update window informs me today I'll receive downloads for Windows only, not for all Microsoft products.
  When I click on "Change settings", the Microsoft Update option is no longer present.
  When I click on the link 'Get' updates for more products, I am now redirected to the former site of Windows Update V4 (who is not supposed to appear on Windows Vista) instead of Microsoft Update, and this site Web of Windows Update cannot detect the Vista updates.
  So I'm stuck now with only being able to get informed about the upgrades to Windows, but not other updates from Microsoft. And we don't mean Windows Vista x 64 final with the last Windows Update Agent 7.2.6001.788. This new update would be the culprit?

  Hi Unicodemaster787,

  Even if it is not automatic, you should be able to get your updates from the Microsoft Download center http://www.microsoft.com/DOWNLOADS/en/default.aspx

  Other than that, your best bet would be to do a repair install and let the system to reinstall the original files and settings.

  When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the Search box, and then click configuration in the list programs. Then click on install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  Remember, however, that it could undo previous changes to solve your problems of .net.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows xp folders unable to keep the display settings option

  Original title: windows xp folders will not store display settings. urgent!

  in windows xp, my folders don't keep my display settings

  example: when I go to my music I put the "Détails" view then I press x
  (or go to another folder) and when I go back to my music, it's back to the list
  I need my files to keep their display settings

  I made sure that xp is set to remember each folder view settings

  Microsoft fix - it Center Crouch.

  I tried these
  http://tweaks.com/Windows/37415/reset-folder-view/

  http://tweaks.com/Windows/36833/fix-folder-view-memory-loss/

  and it still does not

  (perhaps could a kind soul with xp download
  their registry values of work associated with folder view settings)

  or a tool to fix

  It's really driving me crazy.
  I'm tired of searching the net to find patches that do not work.

  Please help me.

  Hello

  I suggest to create a new user account and see if the problem is resolved.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved, then see the article mentioned below.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  See also:

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  It will be useful.

• Svchost.exe Microsoft address files Norton Security

  Whenever I have check the history of my PC security in Norton 360, I'm getting several reports of svchost.exe Microsoft attack different Norton Security files.  Why svchost.exe continually present my Norton Security files?  I need to change some settings in Microsoft to prevent this?  I see no reason why it should happen, but if the actions of svchost are valid and necessary, they are not completed.  Please tell me if they are valid, how can I activate them?

  Thank you

  I'm surprised that any Norton product you did not remove the malware.

  Sometimes, the security software removes the infected DLL file but does not remove the configuration of system remains which attempts to load the DLL file (with the help of svchost or a similar mechanism) at the start of the system.  This usually gives some error messages like "Error loading C:\WINDOWS\mopscatp.dll" where the name of the DLL file is usually a random string of letters and numbers.  If this is the case, you must remove the registry entry that causes the auto start.  It is best to do this using Autoruns (a free tool from Microsoft).

  That, however, does not resemble the situation you have.

  In any case, I suggest that you download, install, update and run a full scan with each of the following free programs.  Do not get the test of the 'Professional' of each program version.  Be careful during the installation process that you do not inadvertently install software "add on" such as the Ask toolbar, which the editor trying to sneak into the installer.

  Do not run the scans at the same time.  Each scan can take some time, depending on the size of your hard drive, so start an and then go for a non computer chore for a couple of hours.  Once the scan is completed, allow the program to remove or quarantine everything it finds.

  When finished, I suggest you uninstall SUPERAntiSpyware (which I find to be more intrusive I like) but keep MalwareBytes AntiMalware as well as every week or so, you can update the MBAM database and do a scan.

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• Save the scan document to Microsoft Word

  I can't change the settings of Microsoft Scan to allow saving a document as a Word. doc. Any help would be greatly appreciated.

  Hello rcohan6168,

  As your question relates to Microsoft Word, you will get a much better response if you posted the question Word Forum: http://answers.microsoft.com/en-us/office/forum/word?tab=Threads

  As far as I know a scanned document is automatically saved as a .bmp or jpeg. This is because the ' scan ' is in fact a photograph of this document after scanned by your scanner. I could be wrong, but I don't think that you can actually save the document as a .doc file - well not unless you actually cut and copy the .bmp/jpeg file into a word document, and then save.

  However, the above is only my thoughts. Try posting the question in the forum of Word and see if someone else can give you more information.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Microsoft Security Essentials does not auto scan.

  Original title: For some time my windows security does not have the auto scan I have planned. It worked for awhile, but now I have to manually complete the analysis once a week.

  I took a moment for Microsoft Security Essentials run a complete scan Sunday to 5:pm.  My computer is no longer made these automatic scans, I have to go the Microsoft Security Essentials and manually run the full scan.  Why this automatic feature no longer works?

  Hi Louise,.

  This problem may occur if there is no third-party software installed on the computer or due to corrupted settings of Microsoft Security Essentials.

  1 did you install another antivirus on the computer software before?

  2. did you of recent changes on the computer before this problem?

  3. at the guarded computer turned on at the scheduled time?

  4. what version of anti-virus software do you use?

  Method 1:
  I suggest you uninstall if there is no third-party software installed on the computer. Uninstall the third-party antivirus software, using the removal tool on the manufacturer's Web site.

  Method 2:
  If the problem persists, I suggest to uninstall and reinstall Microsoft Security Essentials and check if it helps.

  See the article for more information.

  How to manually uninstall Microsoft Security Essentials 2.0.1963 if you cannot uninstall it using Add / Remove programs
  http://support.Microsoft.com/kb/2483120

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Cannot print the document Microsoft Paint the same size as the original

  Original title: Windows 7 paint

  I can't scan a document in the painting and see the entire page on the screen and especially can not print the same size as the original document.  I'm scanning a single 8 1/2 "by 11" paper in paint and were not able to select the appropriate settings in the properties of the image, or setting of the page to print this document from the size of the original... Help, please... Thank you

  Hi Bob,

  Thanks for posting your query in Microsoft Community and we can help you with your problem.

  You can check the print settings in Microsoft Paint and check if it works.

  a. open Microsoft Paint

  b. click on the drop-down menu in the top-left corner

  c. click print and click on Preferences

  d. on the Page tab, make sure that the settings are correct for the Page size and Orientation

  You can also check out the following articles for more information about the painting:

   

  Resize a picture using paint

  http://Windows.Microsoft.com/en-us/Windows7/resize-a-picture-using-paint

   

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

  Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you

• Unable to connect to the Microsoft of the Windows store account

  I can connect to my Microsoft account using my internet browser. However, I'm unable to do so from the Windows store.

  Whenever I try to download something from the store, he asks me to connect to my Microsoft account. When I type in my login and my password and click the button "Save", he says: -.

  "This password is incorrect. "Make sure you are using the password for your Microsoft account."

  I tried to change my account password and empty the memory cache on my Windows store, but to no avail.

  Hi Anirban,

  For a better understanding of the issue, I would need more information on your side.

  1. you are using a local account or Microsoft Account currently?

  2. did you of recent changes on the computer before this problem?.

  This problem could occur due to these reasons.
  1. due to wrong settings of Microsoft account.

  2 corrupt the Windows Store Cache.

  Try the steps listed here and see if it helps.

  Method 1:
  I suggest to connect to Microsoft Account and then try to open Windows Store. Check if you face any problem.

  Method 2:
  If the problem persists, I suggest you run Microsoft store account and check if it helps.

  Troubleshooter in Microsoft Accounts

  Method 3:
  I suggest you try the procedure described in the article and see if it helps.

  Why can't I connect to the Windows store?

  Note: try the steps that you have not tried before.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Removed Mcafee preinstalled and ran development tool but mcagent.exe is in the behavior of icon settings

  My computer could not install the updates of Windows because of missing or corrupted files. I used the refreshment to repair the damage that also restored to pre-installed Mcafee. I uninstalled programs and also executed Development tool. Mcagent.exe appears in the icon behavior settings. What is the Mcafee files left or malware? I had already run Malwarebytes and that he had removed the rogue system tool. I would appreciate help with this.

  

  Hi Dave,.

  Thank you for keeping us posted.

  Follow these steps.
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  (a) press the Windows key + R and type regedit to open the registry editor.

  (b) go to: HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify

  (c) in the right panel to find PastIconStream and IconStream, delete both.

  (d) close the registry window.

  (e) open the Task Manager by pressing Ctrl + Alt + Delete together.

  (f) scroll the list of processes, to find Windows Explorer,

  (g) in the lower right corner, click on restart.
  Now, check the Notification area.

• Delete "Check for Updates" Microsoft Office 2010 - GPO

  I'm working on the packaging of various components of Microsoft Office 2010, such as the shared components, the Office Software Protection Platform Service, Visio (all flavors) and project (Standard and Pro).  I wanted to delete "Check for Updates" in the Help menu.  I installed the Office administrative templates on my machine to capture, added models to gpedit.msc and open administration-> Microsoft Office 2010 templates-> disable UI elements-> "disable the commands on the file tab | Help»  I ran a prescan, then I activated the strategy, checked the box to remove the "Check for Updates" and click OK.

  I open Visio and checked that the 'Check for Updates' button is greyed out.  I closed my Visio and performed a scan of post and saved the project.  I looked in all the files in the registry text.  I pulled the text below in the file HKEY_CURRENT_USER.txt, added to the lower part of the same file in my project of exisitng Visio, run build.bat, cleared out the old sandbox, launched Visio, and the button is grayed.

  My question: this application will encounter problems with Group Policy objects, or the complete isolation on these entries mode settings will be sufficient to keep the setting?

  Here is the text of registry I captured and added (also included in the attached text file):

  isolation_writecopy HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\Toolbars\Settings
  Value = Microsoft Visio
  REG_BINARY=#01#01#00#00#00#00#00#00#02#00#01#00#00#00#02#01#ff#ff#8f#05#00#00#01#00#18#00#00#00#10#00#00#02#02#02#fe#00#00#00#00#c8#00#00#00#23#01#da#00#eb#01#ce#02#02#01#ff#ff#f1#05#00#00#41#01#18#00#00#00#12#00#00#02#00#02#00#00#00#00#00#09#01# 00 00 # 46 # 01 # #ea #00 # #02 #de #02 4f

  isolation_writecopy HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Visio
  Value = MTTF
  REG_DWORD = # 7 a #02 #00 #00
  Value = MTTA
  REG_DWORD = # 7 a #02 #00 #00

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy\History\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} isolation_full

  isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy\History\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} \0
  Value = Options
  REG_DWORD = #00 #00 #00 #00
  Value = Version
  REG_DWORD = #03 #00 #03 #00
  Value = DSPath
  REG_SZ ~ LocalGPO #2300
  Value = FileSysPath
  REG_SZ~%SystemSystem%\GroupPolicy\User#2300
  Value = DisplayName
  REG_SZ ~ local #2300 group policy
  Value = Extensions
  REG_SZ~[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}]#2300
  Value = link
  REG_SZ ~ Local #2300
  Value = GPOName
  REG_SZ ~ local #2300 group policy
  Value = GPOLink
  REG_DWORD = #01 #00 #00 #00
  Value = lParam
  REG_DWORD = #00 #00 #00 #00

  isolation_full User\software HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

  isolation_full User\software\policies HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

  isolation_full User\software\policies\microsoft HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

  isolation_full User\software\policies\microsoft\office HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

  isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0

  isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0\visio

  isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0\visio\disabledcmdbaritemscheckboxes
  Value = OfficeAssistant
  REG_SZ ~ 0 #2300
  Value = GetStartedOfficeOnline
  REG_SZ ~ 0 #2300
  Value = ContactMicrosoft
  REG_SZ ~ 0 #2300
  Value = OfficeCenter
  REG_SZ ~ 0 #2300
  Value = ButtonTaskClickToRunStatusUpdates
  REG_SZ ~ 0 #2300
  Value = ProductUpdates
  REG_SZ ~ 18220 #2300

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} isolation_writecopy
  Value = LastPolicyTime
  REG_DWORD = 8 # c# 50 #ff #00

  isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office

  isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0

  isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\visio

  isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\visio\disabledcmdbaritemscheckboxes
  Value = OfficeAssistant
  REG_SZ ~ 0 #2300
  Value = GetStartedOfficeOnline
  REG_SZ ~ 0 #2300
  Value = ContactMicrosoft
  REG_SZ ~ 0 #2300
  Value = OfficeCenter
  REG_SZ ~ 0 #2300
  Value = ButtonTaskClickToRunStatusUpdates
  REG_SZ ~ 0 #2300
  Value = ProductUpdates
  REG_SZ ~ 18220 #2300

  If specified in your package (in the virtual environment) it will be used. Something virtual will win all the conflicts with local elements (in this case deployed GPO registry keys). If you specify a setting normally applied GPOS in your package there no way to replace it by using Group Policy objects...

• metric for Microsoft SQL Server

  I'm looking for the settings for Microsoft SQL Server reference manual. He can't find on the website of the documentation

  Please check at http://download-west.oracle.com/docs/cd/B16240_01/doc/em.102/b28748/toc.htm

• I get repeated and unwanted advice to update my plugins, and yet I regularly update everything that appears on my notice of automatic update of the software.

  It gets really annoying. I have an old computer, but everything works fine for my needs. I used to get periodic requests of my automatic settings or microsoft or firefox or to the person, update this or that. I click and download the upgrade, and life has continued. Now I get repeated and unwanted reminders to update my flash player or my system of firefox, and I don't have to or want to, in my opinion. And I would like the opinion to stop already.

  Hello, according to your information system that you are using a mac is still based on the old ppc architecture. Unfortunately this or supported by apple, mozilla firefox and flash longer, even if you wanted to update, it is no longer possible. You can turn off reminders to update firefox in Preferences > advanced > update. I don't know in what context the plugin update notifications are appearing, so I can't give any indication on this...

  If you wish to continue using a webbrowser to update you can also go to the "tenfourfox", a 3rd party project based on firefox:

  Firefox no longer works with Mac OS X 10.4 or PowerPC processors