Retrieval of a list of objects of entity without using a view

Similar Questions

• How to find the list of the patches applied without using the inventory?

  Hello
  
  I asked this question once.
  How you will find the list of the patches applied to the House of Oracle database without using commands like opatch lsinventory - detal etc...
  I think that registry$ story is a view from where you can find the list of the applied patches.
  But I think that he understands all the bug fixes, stand alone or one-off patches. It will mainly list on the CPU patches applied (correct me if I'm wrong).
  
  Thank you
  Fany

  Salvation;

  Please read
  You can delete $ORACLE_HOME/.patch_storage Directory? [403218.1 ID]

  Respect of
  HELIOS

• Object displayed fast without opacity keyframe?

  How to make an object appear quickly without using the keyframe of the opacity? I don't want it to appear as its increasing opacity, I want it to appear as when you make one layer on top of the other?

  You have two options here.

  (1) cut the layer to start where you want it to appear.  You can do this by dragging the handle of the layer where you want to start, or by visiting at the same time, you want to start, by selecting the layer and pressing 'alt + []'.

  (2) use hold keyframes.  At the beginning of the layer, set the opacity to 0, activate keyframes, then right-click on the just created keyframe and click on "toggle hold keyframe.  Then go to where you want it to appear, and then set the value to 100. This emerges from one value to the other rather than the interpolation between values.

• I've recently updated to ElCapitan. Where I go all my contacts? And how do I retrieve my contact list?

  I've recently updated to ElCapitan. Where I go all my contacts? And how do I retrieve my contact list?

  You have a Time Machine backup?

  If you do, restore from it.

  If there is an archived version, restore it from iCloud.

  Section: Restoration of your contacts.

  https://support.Apple.com/kb/PH22730?viewlocale=en_US & local = en_US

• Ksoap2 to manage the list of object complex as request

  I use Ksoap2 to call webservice in my application... I use kvmserialisable for complex data type and it works fine... But I'm blocked up with passing LIST of OBJECT COMPLEX as REQUEST...

  It's my SOAP request and the problem is zero, one or more repetetions...

  
              
                  
                      ?
                      ?
                  
  
  

  Help, please

  Here is a sample of my code, for a vector of objects of the Conference

  propertyCount = getPropertyCount(properties, "conferences", this.conferences);
          if (index < propertyCount) {
              info.name = "conferences";
              info.namespace = "http://xxx";
              info.type = new XXXConference().getClass();
              info.flags = (this.conferences == null ? PropertyInfo.TRANSIENT : 0);
              return;
          }
  

• CSS refresh after javascript DOM change (tab Ajax control) and also refresh the list of objects of Navigation

  Hi all

  When I access a Web page, that I created in the browser or Widget that uses an ASP.NET Ajax Control Toolkit Tabs the action of switching between tabs works well but the tab header does not reflect the change to display the active tab.

  In a standard browser of the tab header will be change / light tone based on the css classnames active Ajax control for settings changes dynamically in the DOM when switching between tabs and I was wondering if maybe the BB browser will not reflect/refresh css when changes on the client side affect the DOM? If that's the case (?) is there a way to force that change somehow?

  Also in the same direction and on the similar question I posted yesterday on switching between Navigation power user mode in a Widget, so javascript client-side dynamically is change the 'x-blackberry-focus' of a DOM object possible to have the change reflected in the Navigation objects? Or is the list of objects that can be traversed only generated load initial page and cannot change without a new post?

  Thank you

  Derek

  I solved the problem with the Ajax Control Toolkit TabContainer uisng having to do a "dummy" DOM change in the TabHeader after that the tab is passed between the tabs then forcing the refresh and repaint the tab headers.

• obsolete since com.vmware.ui.lists.ColumnSetContainer Sdk 5.5 not supported in HTML plugins. that the way to view the list of objects

  com.vmware.ui.lists.ColumnSetContainer obsolete since the Sdk 5.5 not supported in HTML. plugins that display in the object list. I tried the sample HTML plugins. ChassisA and chassiB but, but the workspace object is empty

  
  

  Looking forward to a quick response.

  
  

  Thanks in advance.

  Kind regards

  Rouault.

  The plugin.xml samples of chassisA or chassisB show how to set the object lists without using the deprecated ColumnSetContainer.  Make sure that you follow closely these samples and it should work for your own plugin.  Otherwise, you will need to provide a way for us to reproduce your problem. Thank you.

• list of objects for scripts - summary.hardware config DURATION

  Hello

  Y at - there somewhere a list of objects for what are all the different parts for summary.hardware and config etc, I found the following but don't really know how to read in the format of host.x.x.

  http://pubs.VMware.com/VI3/SDK/ReferenceGuide

  I'm obviously missing something!

  Thank you

  Dan

  There is no need to run another EEG - view because all the properties have been filled with the initial EEG-view:

  Just type: $madeupvariable.summary

  It will return something like this:

  Host: VMware.Vim.ManagedObjectReference

  Material: VMware.Vim.HostHardwareSummary

  Duration: VMware.Vim.HostRuntimeInfo

  Config: VMware.Vim.HostConfigSummary

  QuickStats: VMware.Vim.HostListSummaryQuickStats

  OverallStatus: Green

  RebootRequired: false

  CustomValue:

  ManagementServerIp:

  MaxEVCModeKey:

  CurrentEVCModeKey:

  DynamicType:

  DynamicProperty:

  So now that we know what is basically, you want to know what's under the host, type:

  $madeupvariable.summary.host

  so on and so forth.

• Can not see the list of objects of the OSM

  When I open the style of the object manager, I see the Standard objects and Quizzing options listed in the box on the left and a list of styles in the box to the right of this.  I can't indicator is entered to see the detailed list of objects.

  I am using Captivate as part of the eLearning Suite 5.5 2.5 on a Windows 7 computer.  I don't have administrator rights on this computer.  However, I have the same problem with verson even on a XP machine where I have administrator rights and also using Captivate 6 test on the first machine.

  

  Please report it via the Bug link.

  You must click ON the triangles!

  See you soon... Rick

• Static list display object

  I have a static and inspiring list display object that I let fall the component selectonechoice in my popup.
  When I click a button on the home page, it opens a popup and I want to show a default value. The following code executes without any problems
  but does not set the value. He stresses that the first value in the selectonechoice. What could be the problem?
  
  String df = "Hello";
  DCIteratorBinding iter is getBindingsForDCB () .findIteratorBinding ("SampleViewObj1Iterator");.
  ViewObject dvo = iter.getViewObject ();
  Drow line [] = dvo.getAllRowsInRange ();
  for (int i = 0; i < drow.length; i ++) {}
  String dval = drow (String).getAttribute ("DataAttr");
  If (df.equals (dval)) {}
  iter.setCurrentRowIndexInRange (i);
  }
  }
  AdfFacesContext.getCurrentInstance () .addPartialTarget (selectOneChoice2);

  As Frank said, you set the property value correctly, not the default row as the current row. So, if your choice of selecetOne is like this,

  getDefaultValue() of the bean should return the key of that particular line which you want to set as default. So if you want to 'Élément Label2' as a default, your getDefaultValue() should return 'val2 '. Just to test, you can even set , since you have a static key and if you are sure that by default are always going to be the second row...

  It will be useful,
  Julian.

• x 64 application entity Framework using Oracle.DataAccess.Client

  I am trying to build a x 64 application Entity Framework using the current Oracle.DataAccess.Client.  I can launch the application as Any CPU and x 86 using the managed provider, but when I compile for x 64, I get the error below when running. If I change the provider to Oracle.ManagedDataAccess.Client it works with x 86 and x 64 compiler.  Unfortunately, we are unable to use the managed provider until the xml is supported.  I have two clients x 86 and x 64 installed.  Any ideas?

  System.Data.EntityException was not handled

  HResult =-2146233087

  Message = the underlying provider failed to open.

  Source = System.Data.Entity

  StackTrace:

  at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf (Boolean openCondition, storeConnectionToOpen of DbConnection, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean & closeStoreConnectionOnFailure)

  at System.Data.EntityClient.EntityConnection.Open)

  at System.Data.Objects.ObjectContext.EnsureConnection)

  to System.Data.Objects.ObjectContext.SaveChanges (SaveOptions options)

  at System.Data.Entity.Internal.InternalContext.SaveChanges)

  at System.Data.Entity.Internal.LazyInternalContext.SaveChanges)

  at System.Data.Entity.DbContext.SaveChanges)

  at EntityFramework1.EFTest.AddItem (c:\TFS2012\AD). NYSAS. ICPC\DEV\M01\EntityFramework1\EntityFramework1\EFTest.cs:line 21

  at EntityFrameworkConsole.Program.Main (String [] args) in c:\TFS2012\AD. NYSAS. ICPC\DEV\M01\EntityFramework1\EntityFrameworkConsole\Program.cs:line 12

  at System.AppDomain._nExecuteAssembly (RuntimeAssembly assembly, String [] args)

  at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly)

  at System.Threading.ExecutionContext.RunInternal (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)

  at System.Threading.ThreadHelper.ThreadStart)

  InnerException: Oracle.DataAccess.Client.OracleException

  HResult =-2147467259

  Message =""

  ErrorCode =-2147467259

  StackTrace:

  at Oracle.DataAccess.Client.OracleException.HandleErrorHelper (Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx * pOpoSqlValCtx, ByVal src, String procedure, Bcheck Boolean, Int32 isRecoverable)

  at Oracle.DataAccess.Client.OracleException.HandleError (Int32 errCode, OracleConnection conn, IntPtr, Object src opsErrCtx)

  at Oracle.DataAccess.Client.OracleConnection.Open)

  at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf (Boolean openCondition, storeConnectionToOpen of DbConnection, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean & closeStoreConnectionOnFailure)

  InnerException:

  Here is my web.config (less sensitive information):

  <? XML version = "1.0" encoding = "utf-8"? >

  < configuration >

  < configSections >

  < section name = "EF" type = "System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, Entity Framework, Version = 5.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089' requirePermission ="false"/ >"

  < / configSections >

  < Entity Framework >

  < defaultConnectionFactory type = "System.Data.Entity.Infrastructure.LocalDbConnectionFactory, Entity Framework" >

  < Parameters >

  < setting = "v11.0" / >

  < / Parameter >

  < / defaultConnectionFactory >

  < / Entity Framework >

  < connectionStrings >

  < add name = 'Entities' connection string connectionString="metadata=res://*/Models.EFEntities.csdl|res://*/Models.EFEntities.ssdl|res://*/Models.EFEntities.msl;provider=Oracle.DataAccess.Client;provider = & quot; data source = DATASOURCE; password = PASSWORD; persist info security = True; user ID = username & quot; "" ProviderName "/ >

  < / connectionStrings >

  < / configuration >

  Alex,

  Finally, we have solved the problem.  It turns out that we had a bad x 64 home path in the PATH variable.  I lost track of what it was originally, but I'm sure the x 64 bin path was correct. I did not notice that it was wrong, until I tried to install the full client and began to see an error indicating that it was missing a dll.  This led me to a post on the forum, in which you indicated that the PATH variable has not been set (ODAC 12 c for xcopy issues).  In our case, it is not missing, just fake.

  This is the behavior that we see if the PATH variable for the home directories and bin is incorrect:

  • Full client: an error of external system (no exceptions).  The error message is that the oraons.dll is missing.
  • XCOPY customer: generates an exception without error message.  The Exception.Message property is empty and there is no inner exception.

  Can the ODP team can add a meaningful message for this exception?  If the exact error cannot be highlighted during execution, a generic name on the path audit would help enormously.  I must have looked at it a dozen times and didn't notice that it was false.  If I had no idea that this could be the cause, it would be discussed more in detail, or had someone else Verify that it was correct.  I hope that we would have solved much earlier.

  Thank you.

• How to display the drop-down list box in MS excel by using labview report generation toolkit? pleasepost code block diagram?

  How to display the drop-down list box in MS excel by using labview report generation toolkit? Please post the block diagram of the code so that I can able to generate from the drop-down list box in excel with the menu drop-down...

  Like this. (edition, use the reference forms instead of the reference to the worksheet)

  Ben64

  

• Database objects can be replicated using Oracle Streams and which object cannot be replicated?

  Hi Experts,

  I need clarification on the sub questions,.

  
  

  Database objects can be replicated using Oracle Streams and which object cannot be replicated?

  How can we check that what schema and objects are used streams replication and which schema and objects is not used in the replication stream?

  Thanks in advance.

  Select *.
  of dba_streams_unsupported
  where owner | '.' || table_name (...)

  order by 1, 2, 3;

• Is it possible output display of list of items in web app using two categories?

  Help, please! Is it possible output display of list of items in web app using two categories? For example, I want to list all the items web app 32098 marked with categories 189076 AND 190266, excluding items that have been marked with one of these categories. Site is not currently liquid activated, but I could enable, if necessary. Any suggestion would be appreciated.

  I highly recommend the App search Web use if you ever want to search by multiple fields.

  I recommend against the use of categories. Avoid as much as possible, categorization items if you can. Try to work on your web applications around the areas of web application development and web app datasource, if you can.

  This allows you to easily filter a web application defined by one or more fields with precision and fast!

  Here is an example of a site using web app search find a floor - Tauranga carpets and floor coverings

  Here's another example of site Web too: our range of rolls of carpet

  However, if you insist and require the use of categorize, I know to categorize, you can have 1-to-many relationships, so I think that Robert Bell said that it the best, you can simply filter web app items from several categories. Even if using liquid - by the way, as output of fluid tell you not what the element is qualified.

  My recommendation is to rethink your application web, if possible, do not use categories.

  Hope this helps,

  Stephen

• The knife tool develops a black line on the objects that I colored using the live paint bucket. How to get the tool knife to stop this and instead of being invisible?

  The knife tool develops a black line on the objects that I colored using the live paint bucket. How to get the tool knife to stop this and instead of being invisible?

  I understand that it is a live paint object you use.

  Try this: