Retrieve and display the news of 3 tables

Similar Questions

• Read integer values to worksheet and display the values in a table

  Hi all

  I have integer values to read from a worksheet and display them in a table. I uses 'Reading of the spreadsheet file' mode 'integer '. I want to display these values in a table. The problem is the table takes only 2d-array of string as input but not an integer.

  It works fine if I change 'Worksheet file playback' mode to 'integer' to 'chain', but I want to read integers and must use integer values for calculations more. Please give suggestions on the display of integers to a table.

  Thank you.

  Do not take not piece-by-piece just convert as a whole. See the attached example

  

  Good luck

• How to retrieve and display the image on screen stored in pim...

  Hello world

  Can anyone tell how to recover the image store in pim and then display it on the screen

  See the code below. I just copied it from PIM API doc

   import java.io.IOException;
   import javax.microedition.pim.Contact;
   import javax.microedition.pim.ContactList;
   import javax.microedition.pim.PIM;
   import javax.microedition.pim.PIMException;
   import javax.microedition.pim.PIMItem;
   import net.rim.device.api.io.Base64InputStream;
   import net.rim.device.api.io.Base64OutputStream;
  
   public class PhotoExample
   {
  
       private Contact _contact;
  
       public PhotoExample() throws PIMException
       {
           ContactList contactList = (ContactList) PIM.getInstance().openPIMList(
                   PIM.CONTACT_LIST, PIM.READ_WRITE );
           _contact = contactList.createContact();
       }
  
       public void setPhoto() throws IOException
       {
           byte[] photo = getSamplePhoto();
           byte[] photoEncoded = Base64OutputStream.encode( photo, 0,
                   photo.length, false, false );
           if( _contact.countValues( Contact.PHOTO ) > 0 ) {
               _contact.setBinary( Contact.PHOTO, 0, PIMItem.ATTR_NONE,
                       photoEncoded, 0, photo.length );
           } else {
               _contact.addBinary( Contact.PHOTO, PIMItem.ATTR_NONE, photoEncoded,
                       0, photo.length );
           }
       }
  
       public byte[] getPhoto() throws IOException
       {
           if( _contact.countValues( Contact.PHOTO ) > 0 ) {
               byte[] photoEncoded = _contact.getBinary( Contact.PHOTO, 0 );
               return Base64InputStream.decode( photoEncoded, 0,
                       photoEncoded.length );
           } else {
               return null;
           }
       }
  
       private static byte[] getSamplePhoto()
       {
           // return the raw bytes of the photo to use
       }
  
       public static void main( String[] args ) throws Throwable
       {
           PhotoExample example = new PhotoExample();
           example.setPhoto();
           example.getPhoto();
       }
  
   }
  

  .

• Retrieve and display a result set using the dynamic sql?

  Hi all
  
  How would display a result set in Oracle using the dynamic SQL? Reason being, the table where I'd retrieve and display the result set is a GLOBAL TEMP TABLE created in a stored procedure. If I try to use the loop as usual, the compiler complains that the table does not exist. This makes sense because the compiler does not recognize the table because it is created dynamically. Here is an example:
  
  create or replace PROCEDURE maketemptab IS
  sql_stmt VARCHAR2 (500);
  OutputString VARCHAR2 (50);
  
  BEGIN
  -create temporary table
  sql_stmt: = ' CREATE of TABLE TEMPORARY GLOBAL globtemptab (id NUMBER, col1 VARCHAR2 (50))';
  EXECUTE IMMEDIATE sql_stmt;
  dbms_output.put_line ('... created table ');
  
  -Insert a row into the temporary table
  sql_stmt: = "INSERT INTO globtemptab values (1, 'some data of a test')';"
  EXECUTE IMMEDIATE sql_stmt;
  dbms_output.put_line ('... inserted row ');
  
  -Insert a row into the temporary table
  sql_stmt: = ' INSERT INTO globtemptab values (2, "some more test data");
  EXECUTE IMMEDIATE sql_stmt;
  dbms_output.put_line ('... inserted row ');
  
  -Select the row on temporary table
  sql_stmt: = 'SELECT col1 FROM globtemptab WHERE id = 1';
  EXECUTE IMMEDIATE sql_stmt INTO outputstring;
  dbms_output.put_line ('... selected line: ' | outputstring);
  
  -drop temporary table
  sql_stmt: = 'DROP TABLE globtemptab;
  EXECUTE IMMEDIATE sql_stmt;
  dbms_output.put_line ('... moved table ');
  
  -display the result set
  for tabdata loop (select col1 from globtemptab)
  dbms_output.put_line ('... test of recovered data are' | tabdata.col1)
  end loop;
  end;
  
  
  In short, how to rewrite the SQL below the comment "to display the result set" using the dynamic sql?
  
  Thank you
  Amedeo.

  Hello

  Try this:

  CREATE OR REPLACE PROCEDURE maketemptab IS
     sql_stmt     VARCHAR2(500);
     outputstring VARCHAR2(50);
     v_cursor     SYS_REFCURSOR;
     v_col1       VARCHAR2(30);
  BEGIN
     -- create temp table
     sql_stmt := 'CREATE GLOBAL TEMPORARY TABLE globtemptab(id NUMBER, col1 VARCHAR2(50))';
     EXECUTE IMMEDIATE sql_stmt;
     dbms_output.put_line('...table created');
  
     -- insert row into temp table
     sql_stmt := 'INSERT INTO globtemptab values (1, ''some test data'')';
     EXECUTE IMMEDIATE sql_stmt;
     dbms_output.put_line('...row inserted');
  
     -- insert row into temp table
     sql_stmt := 'INSERT INTO globtemptab values (2, ''some more test data'')';
     EXECUTE IMMEDIATE sql_stmt;
     dbms_output.put_line('...row inserted');
  
     -- select row from temp table
     sql_stmt := 'SELECT col1 FROM globtemptab WHERE id=1';
     EXECUTE IMMEDIATE sql_stmt
        INTO outputstring;
     dbms_output.put_line('...row selected: ' || outputstring);
  
     OPEN v_cursor FOR 'SELECT col1 FROM globtemptab';
  
     LOOP
        FETCH v_cursor
           INTO v_col1;
        EXIT WHEN v_cursor%NOTFOUND;
        dbms_output.put_line('...test data retrieved is' || v_col1);
     END LOOP;
     CLOSE v_cursor;
  
     -- drop temp table
     sql_stmt := 'DROP TABLE globtemptab';
     EXECUTE IMMEDIATE sql_stmt;
     dbms_output.put_line('...table dropped');
  END;
  /
  

  Kind regards

• Link to information from tables and display the 'best '.

  Hello! I'm totally new to this great software, and the truth is that I lost D:
   
  I try to explain in more detail what I have to do, I hope you can help me please it is urgent T_T

  I do 3 tables must be related to each other, that is to say a table where a username will be manually enter, another where you manually enter the user name and the third which will automatically enter power of each user (for automatic writing, I'll use random data). Each table will have a box number, for example:
   
  Table 1, box 1: Paul
  Table 2, box 1: door
  Table 3, box 1: 3.74
   
  Table 1, box 2: Miguel
  Table 2, box 2: Ramos
  Table 3, zone 2: 4.99
   
  Table 1, box 3: Maelle
  Table 2, area 3: Branco
  Table 3, case 3: 4.98
   
  I mean, I bind the box to one table with the other three. And because the program must compare the data in table 3 (power) and display the data of the user of best (which has the highest power). In this example, the program should appear:
   
  BEST USER:
  NAME: MIGUEL RAMOS
  POWER: 4.99

  (Is not slender record information when I close the program)

  I don't know if I ask you very much, I have a very clear idea in my head of what I have to do, but being a new software for my not know how to implement it.

  Thank you in advance for your quick response and help and ilustrative! xD

  Have you tried something with the basic understanding of your question check if this is what you need?

  -Still not clear what you mean by table? (In my opinion, the table is 2d array of values here, otherwise please let me know.)

  -C' is the reason why I asked you to show your code you did then it will be clearer.

• call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. The other rows are based on the entities

  Hi Experts,

  JDeveloper 12.1.3.0.0

  I have a VO based on entity object. With a column of the VO is transient attribute (I created).

  I need to call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. As well as other attributes.

  So can anyone suggest how can I achieve this?

  Thank you

  AR

  I think that you need a stored function (which returns the value) in this case, is not?

  Take a look at:

  https://docs.Oracle.com/CD/B31017_01/Web.1013/b25947/bcadvgen005.htm

  and search for:

  Invoking stored function with only Arguments in

  call your function in the Get attribute and return value accessor...

• Add Colume in the table and display the result in it.

  Hi guru,.
  I have a requirement to add the column to the existing Table. and display the result after calculation.
  
  
  Thank you
  Rutu

  Hello

  Please use this referral code snippet:

  Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  OAViewObject vo = (OAViewObject) am.findViewObject (""); Give VO name attached to the region of the Table.
  If (vo! = null)
  {
  vo.addDynamicAttribute (""); Addition of ViewAttribute to VO
  }
  VO. Reset();
  VO. Next();

  Do the math you want to

  Definition of the calculated value in the created attribute of VO
  vo.getCurrentRow () .setAttribute ("", );

  I hope that gives you a proper help.
  Please do not hesitate to ask if more Question

  --
  Thank you
  Shrikant

• Assistance needed for the registration of the application and store the values in a table

  Hello

  Hope that this explanation is not confusing. I explained my application you want in the text below and also attached a skeleton VI + screenshot hoping that he will clarify

  I try to do a VI that does the following:
  1. some code (blue Subvi) runs every 200ms
  2. every 200ms, a random number is generated
  3. the random numbers are stored in a table in intervals of time s 0.8 ("iterations")
  4. at any time, the (blue Subvi) code needs to have access to the random numbers generated in 'the previous iteration.

  To clarify, the iterations are as follows:
  Iteration #1: 0 - 1.8 s
  Iteration #2: 2 - 2. 8 s
  Iteration #3: 3 - 3.8 s

  Iteration #4: 4 - 4.8 s
  ..
  And so on...

  So for each iteration: the blue (Subvi) needs to have access to the random numbers generated in the previous iteration, for example:

  Iteration #1 (0 - 1.8 s): The blue (Subvi) Gets an array that contains only the zero (random numbers are recorded for the first time)
  Iteration #2 (2s - 2 8 s): The code gets an array containing random numbers of iteration #1
  Iteration #3 (3 s - s 3.8): the code gets an array containing random numbers of iteration #2
  Iteration #4 (3 s - s 3.8): the code gets an array containing random numbers of iteration #3
  ..
  And so on...

  At any given time in time;
  -The code gets an array that contains all the random, recorded during the previous iteration numbers
  -Values since before her previous iteration are ignored and not stored anywhere

  Thus, for example, to the #7 iteration:

  -The values during the iteration #6 are made available to the code in the form of a table

  -Values of #1 to #5 iterations have been deleted and not stored anywhere

  It is important that all values since before recording the previous iteration are deleted because they are not necessary because VI actaual will work for a long period of storage of numbers a lot more than I have indicated here

  Screenshot of the skeleton VI:

  

  I tried to play with the paintings, the structures of the case and the registers at offset, but everytime I try I get something wrong

  The skeleton VI is also attached (Iteration_VI and Code_SubVI)

  Any suggestions?

  Thank you!

  Yes, I agree that you need help.  First of all, you really do need to learn more about LabVIEW - spend a few hours with the tutorials, such as those mentioned on the first page of the Forums.  Oops - links to the tutorials which had been present for years seem to have been moved "elsewhere" with August 2016 LabVIEW community reorganization.  But look for them...

  Here are a few screws that basically implement what I described above (with some minor modifications).  First of all, this is a Top level VI which runs at 5 Hz (200 msec waits).  It starts with an array of 5 elements of 0, then once per second, this is replaced by a table of random numbers generated by the Random 5-table sub - VI 5 elements.  Note that I do not use a loop timed - those who are really designed for LabVIEW RT, but use the simplest functions on the Palette of the timer.

  

  Can't you see how that works?  The array to initialize on the left begins you with a table of 5 elements of 0.  The Timer inside the loop, it runs at 5 Hz, 'Index' counts 1, 2, 3,... to tell you where you are, and 5 shows you everything that lives on the shift register.

  Now sub - VI Random 5-table is supposed to do the following - if she was called to 5, 10, 15,..., it must return a (new) array of 5 random numbers, otherwise, it must return the array that was passed in.  So if all "works", table 5 shows 0, 0, 0, 0, 0 for the first second, a table at random for the second second (which is not superfluous!), a different for the third random picture second and so on.  I have already said a way to build this, but I chose a slightly different method (equivalent).

  

  Whenever it is called, a new random element is generated and added at the end of a (growing) random table stored in the shift register.  If size become 5, we send this Random-table-of-5 out through Out table and reset the register shift to an empty array.

  The case by default (when the size is not equal to 5) is shown below - we just return the array of entry to and accumulate new random table in full growth.

  

  These code fragments extracted from VI.  If you have LabVIEW 2016 (see the "2016" at the top right of the image?  This shows that it is a snippet of code LabVIEW 2016), you can open a blank diagram and drag this image, where magic OR converts it to a VI.  Otherwise, the code yourself and try out it.

  Caution - it is designed to run once.  If you run the program of high level, a second time, you may find that the new Random 5 - table appears to 0.4 ", 1.4", 2.4"(instead of 1", 2 ", 3").  I leave as an exercise for understand you to (a) why he is and (b) fix the code.  If you can't do that, then move an another 3-4 hours with the LabVIEW tutorials (or start playing with this code, edit it in some small way and to understand how it works).

  Bob Schor

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• BlackBerry smartphones help a beginner! my "BOLD" will automatically display the new messages

  I am a complete newbie when it comes to bb. I had mine for a week now.

  anyway. Whenever my "BOLD" out of sleep and if I have a new message (if sound of bb Messenger, text, mms or email) automatically, it opens and displays the message.

  How to stop this? I'm not all messages opening unless I chose to open it.

  pls help!

  Thank you

  Jamie

  and I've been reading around... I found some info on the crackberry Forum... and it seems that the "BOLD" was designed in this way to open messages auto of when you take it out of the case as soon as the message comes in. but I FOUND THE ANSWER! Woo-Hoo all that you have to wait! Wait a few minutes after your notification of message turns off THEN go out of the Holster. and vuala! no open message.

• I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?

  I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?

  Please try the steps mentioned in the Adobe Photoshop Lightroom help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  You can check 6 Lightroom displays a blank blue screen with an X through it in the module development for all the photos of my reference.

• Tax calculation based on the user in the box input and displaying the result.

  Thanks to WhyIsThisMe for starting me on my first draft script & Jono! I'm almost there with my purchase requisition form (90% manufactured from the tutorial).  Everything works except for the taxable column

  

  I can't understand the correct syntax to check the value of the checkbox in the column taxable and then do the math for the tax based on user input in the field % tax

  (total * stateTaxPercent / 100)

  Essentially, I want to make the calculation only the taxable = 1, and then display the cumulative tax in the tax field.

  Should I use mouseup as trigger to perform the calculation of the tax and save the result as a variable and displays the variable in the tax field? Then if another taxable box gets checked, I could add the new calculation of the variable. Not sure whether in an elegant way to get there.

  ?
  

  I would put the following text in the change event of each taxable check box (in formcalc):

  If ($ == 1) then

  tax = tax + (amount * 0,0825)

  ElseIf ($ == 0) then

  tax = tax - (quantity * 0,0825)

  endif

  (where 'tax' is what you called your total tax box and the 'amount' is what you called your box of price).

• Help with the new Style of Table set in shape?

  I'm having all sorts of problems using the new table style trainer.  I'm not a RoboHelpHTML 8 experts (I better with version 5).  I am trying to create a table with 3 columns, of which the first is aligned to the left, the last 2 are centered.  The header (rank 1) is bold and centered.  Also I want all lines of the same thickness.  I created the table using the standard SimpleGridBlack... It is actually a line at the top... don't know what happened.  Then I ran WebHelp and the situation was identical to one here.  Then I duplicated the SimpleGridBlack and apply the new style to the table.  Then I started to make changes to the new style.  I chose the first line and made all columns centered and in bold. Because I want the columns 2 and 3 to be centered, I then selected columns even for change. He took care of column 2.  Then, I chose the last column of change. He took care of column 3.  However, the results were not what I expected. The upload does not quite show the image correctly.  The line under the "gg" is really there and the lines separating columns 1-2 and 2-3 in row 1 are really there.

  However, the first line of column 3 is not centered and lines A-B-C, D-E-F, A-D-G and H-E-B are thicker than the other lines.

  I hope that someone can help you.  It took 2 days and get a website made available for my use to get to the point that I am now.  It is a document that I am out of this week and I have a lot of tables to change.  Thanks for any help.

  Virginia

  8 HR tables are boring to say the least.

  First your alignment problems, you should take a look in the HTML itself to ensure that it is properly applied. The amoun of timers told me to center text and align and the HTML behind comes usually do. To verify here quickly.

  Regarding the double lines that you seem to be around the table, this may help, but I'm not sure that using your styles around them now.

  If you select the table as a whole, right-click right table properties > tab Table > table borders > turn off all borders of the table. Then go to this tab Table > cell borders > set the thickness to be used here, this applies to all round and will give you the lines you want.

  Good luck.

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox