Retrieve scaling MAX Custom units.

Similar Questions

• Change of profile changes inches Custom units

  I am trying to create a new file in Adobe Illustrator and I consult Adobe videos on how to make a logo.  When you create a new document, if I select Print for the profile, as it is said in the video, and then I select inches for units, the profile becomes Custom.  How can I select inches and keep the profile as print?

  Don't worry, you haven't lost anything. Everything will work as shown in the tutorial.

• Creation of new units

  Hello!

  I'm trying to create a new unit and having a little trouble with the calculation of the amount in function.

  I have created a new set of unit called "Ice Machines" to deal with the internal combustion engine-specific units.  The first unit, with that I work relates early sparks.  Some systems report spark as degrees before TDC (Deg_BTDC) and a spark of degrees AFTER the TDC report.  So here's the same measure, just in front of signs.

  I created a new quantity called TDC Relative in the dimensions 0,0,0,0,0,0,0 and rotation category, because deg_BTDC is a few degrees, but in a relative sense.

  For units, the Deg_ATDC factor is 1 and Deg_BTDC-1.  This allows the conversion of the unit work great, so I can easily convert from Deg_BTDC to Deg_ATDC. It's wonderful.

  The problem I encounter is when I add two of them together in a calculation of the amount in function. If I subtracted 1 Deg_BTDC of Deg_ATDC-1, I get 0, because I was expecting, BUT the unit is in Radians, I guess because of the category of rotation. It's really ok, except that I can't convert Radians in Deg_BTDC.

  If I remove the rotation category, I get again the correct numeric value, but the device is '1', if it does not either.

  So, how to make one (or two) what follows: create a set of unit that allows to calcultions that result lead to a unit of the new set, or convert a default unit (Radians) in a custom unit created?

  It always happens... I spend hours reading and violin, trying to get something to work, so I post on a forum and 5 minutes later I understand it...

  In any case, in the size category, you can enter a new category instead of simply select an existing...

  So it does what I want now, but any input of gurus is always appreciated.  ^_^

• Creating a custom for the current scale

  Hi guys,.

  I need help in the creation of a custom scale. I read motor current (analog I / P) and I want to show that on a chart and write it to a file. I need to use a linear scaling for custom scale. The slope is 2 and the intersection point is 0. I have attached the code to clearly indicate what I'm currently building. The way I put up right now, it's not the scaling. It has 2 spots in the code. I would like to create a custom for the first task, as in the attached code scale. I had a scale customized using VI to Express DAQ Assistant. But I do not see these options when I try to do the same with the DAQmx task. Please let me know how this can be done. Any help is greatly appreciated.

  Thank you

  REDA

  Ah.

  on the pallate DAQmx > advanced > the balance settings

  There is a scale property node and "Create Scale.vi"

• Distance communication: sending the custom Java objects

  Hello...
  I use Flex 3.01 - BlazedDS
  
  I have a few working methods implemented on the server I have retrieve custom objects and custom objects table... everything works perfectly...
  I also have a method that I pass a custom Flex object (mapped to a Java object) to retrieve another object Java (mapped to a Flex object) works perfectly...
  
  But I have this method I have send as an argument one of my items customized to retrieve another object custom... and when I invoke this method the cursor "occupied" remains as always and demand is slowing down...
  
  I checked the log on the server and I do not see the method called and no error...
  
  Trying to debug... I saw in the object AbstractOperation "1023 stack overflow" error getting caught, but when I run it normally I see no error...
  
  This object I send as an argument is like a custom class to hold one of my items for various operations on the server and the first method that works, the object I have send as and the argument is simple...
  
  This second purpose is as a container that contains a table of another container of objects containing any kind of my items...
  
  I thought that maybe there is a limit for mapping... I don't know... but I don't see any information to reach the server...
  
  If someone could help me, I would appreciate...
  
  Thank you
  

  Solved...

  It seems that by using the same RemoteObject to call a large number of methods on the same destination is not good...

  I created another RemoteObject to call the method and worked...

  Thanks anyway...

• How to get Strain Gage output voltage

  Hello.  I'm trying to do and calibrate a load cell with the installation of full-bridge strain gage.  I use a NI9219 module with a cDAQ chassis.  Is it possible to capture the actual output voltage?  Signal Express gives me a value of strain, but I really need to know the output voltage.  Where to look.  Thank you!  P.S. I only use this equipment on occasion and am not the more familiar with it, so keep things simple for me.  Thanks again.

  Then, it is quite simple. Two channels:

  Ch01 - DAQmx acquire > an analog Signal > choose voltage: range min/max of the actuator load cell enter the installation of voltage input range (+/-5 k for example), and then create and apply a custom scale (choose the beaches of the table) where the +/-10V = full scale commercial load cell. Once applied "Scaling of units" should be updated automatically to display custom units you defined in the scale.

  Ch02 Custom with Excitation voltage: range of input Signal (can probably leave default), scaling of units = voltage, E.g. Source = internal, Ex value = 2.5V, use Ex for unchecked staggered, depending on Configuration Configuration Terminal, Custom Scaling = none.

  Optional: I normally add an amplitude and levels (analysis > measures Time-Domain) step, drag and drop the "DC" signal on both channels in the graph and create a scalar XY Chart, so I can see my field in real time.

  Add a record to the ASCII step and save the two signals to Excel so you can draw your curve.

• help in my form

  I have these tables,

  1 UNITS (Unit_code, Unit_name).

  2 - STOCK (Item_id, quantity, min_unit_price, max_unit, mid_unit, min_unit).

  3 - SALES_ORDER (customer_id, Order_id, sale_date).

  3 - SALES_ORDER_DETAIL (Order_id, quantity, price, unit_code) - I don't know if 'unit_code' is true here or not?

  the problem here is in the form of sale, there will be two tables (sales_order and sales_order_detail).

  -Maybe I'll have 50 unit in the 'UNITS' table, so the screen must raise a certain number of the column in the table (SALES_ORDER_DETAIL) (UNIT_CODE) db,

  for example, there's max, mid, units of min for "aspirin", "carton, package and tablet" article, but I don't know which of them are the max or the middle of the year

  or the min.

  so, of course I don't know if the number of tricks in the db is a max or middle or unit of min, so I don't know the conversion factor for the units.

  so, how can I know the price if the customer buys 2 packets of aspirin for example.

  the last one is 'so': my problem is how will I know if the number up to the db is the max, or middle or unit min?

  Thank you

  I think I can use 'decode' function

  Select max, average, min v, x, y in the table where item_id =: item_id;

  then

  Select decode (: Unit, v,..., x,...,...);

  I think it is the right solution, right?

• PROBLEMS WITH TX2Z 1000 CTO

  someone please answer me the following questions:
  
  1. the members of some communities touchsmart claim that "sometimes the HP does not control remotely with the model and their laptops also have a matte screen instead of the screen shining in this model". is this possible?
  
  2. I'll have 2 notebooks of this model at the same time & I want to be assured on the previous question. is there someone actually deal with this problem?
  
  3. which model is best, or what are the differences between tx2 & tx2z models?
  
  PLEASE HELP ME DECIDE

  (1) sometimes due to the packaging that your remote control is not in the laptop box or in the slot on the left side of the laptop. If you have checked both places and you have not the remote and you think you should have a contact HP. If you are in warranty HP will send you a replacement as long as it was supposed to come with your custom unit

  (2) people have had this problem, but the resolution is displayed above

  (3) better, it is a matter of choice staff and specifications. The TX2000 and TX2000z are built customer units, if this is not applicable to your question. you could build a better TX2000 a TX2000z or vice versa. The Z is only an indicator of the series.

• Win 10 offer free said AMD Radeon HD display will have problems?

  An offer to book 10 Windows when it's released was available on the taskbar. I agreed. During the audit of the other information available in this window, he said that

  AMD Radeon HD D 7540 would have display problems?  Not said NOT COMPATIBLE instead, he says "INCOMPATIBLE".

  That shut me down 10 or is there a way around it. I'm not going to get another card or try to enter the Pavilion or bring it to have something changed.

  Thank you very much!  Jack ":-D.

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  There was some problems with certain versions with AMD graphics card.  AMD says that the series Radeon HD 7000 will be supported, but it may require that pilots will be available "at a later date on amd.com:

  "Q: what graphic driver should I use for my AMD Radeon™ GPUS or AMD APU?

  Has : Microsoft said that updated device drivers are not needed at this time, as device drivers are compatible with Windows® 10 technical preview. AMD Radeon™ graphic and expedited customer unit should use the latest drivers available from Windows Update until the official Windows 10 driver support is available on amd.com at a later date. »

• Equium A210-1AS won't boot from a CD

  I have posted before on the blue screen UNMOUNTABLE_BOOT_VOLUME and decided to restore the computer.
  I can't access the HARD drive recovery.

  I created a my car windows recovery disk and changed the order of BIOS on a CD first after the Toshiba screen it goes to a black screen with a cursor blinking (_) and I can hear the disc moving, then switches back to windows (leading to blue screen).

  I also tried to create a Live CD of SLAX so I could see if it would start on it and able to recover files, but not the same black screen with cursor.
  I'll order a Toshiba restore CD, if 2 other CDs do not work, will be the only work of Toshiba?

  Thank you.

  Hello

  Hmm the recovery disk Toshiba (that you created) must contain the SATA drivers already so you don t need the compatible SATA mode
  But I think you should try it

  Go to the BIOS and compatible SATA to AHCI mode value
  Then you should try to boot from the disk to recover again

  If this will not help and you would not be able to retrieve the HARD drive unit using the HDD recovery procedure you must check if the Toshiba recovery disc might help

  If that does not help, then a hardware failure is possible!

• Question of memory module - Qosmio F10

  Half of the year there, I changed the motherboard of Qosmio f10 PCB p000415760 to p000454980 (F10) of PCBs.
  When I get back any computer laptop I had a "RECORD OF INFORMATION TOSHIBA" who is after point 2:
  2 confirm the compatibility of the memory modules
  one. Some problems have been found with combination of the chipset Intel 915 PM EXPRESS and some memory modules.
  So you have to check what type of expansion memory is installed in the customer unit.
  b. Exchange an incompatible module with a PC 2700 DDR SODIMM (333 MHz) for module Alviso.

  This means that I have to change the memory module that was on the old Alviso module 855 chipsets?
  If so what type of memory should I get? Buy DDR2 for this motherboard?

  Thanks in advance

  Hello

  With your questions

  Half of the year there, I changed the motherboard of Qosmio f10 PCB p000415760 to p000454980 (F10) of PCBs.
  It's the card used for the Qosmio F15 AV201 model we. TOSHIBA motherboard (special), A5A001749010 (PM0025960010).

  > Means that I have to change the memory module that was on the old Alviso module 855 chipsets?
  No, if you use the module in memory of the former Intel 855 chipset to the new Intel 915 and try no problems, there is no need to change.
  When he says PC 2700 DDR SODIMM, this means that the type of memory to use. In this case, with a frequency of 333 MHZ, taken in charge by the 915 chipset. The brand is your choice.

  > If yes what type of memory should I get?
  The most often used with the Intel 915 are the Infineon PC 2700 DDR SODIM, but Samsung memory modules work fine, too.
  The best are the Corsair and Kingston (512 MB and 1 GB) and the most expensive modules.

  > Buy DDR2 for this motherboard?
  No, you cannot use the DDR2 modules with your motherboard F10. They are different fisically and performance at different frequencies, too.

  Francisco

• Can not use the card PXI controlling SCXI for something else

  Hi all

  We have a hybrid chassis of 1052 with a PXI-6221 (control of the special SCXI version) into the slot of the 8th and, while it allows us to access map of the SCXI-1540 module without problem, if I try to add the NI PXI-6221 to the list of data acquisition cards to read the definition of system files or I make reference to any channel in a task of analog input (custom device) it is telling me that the resource is reserved. When I list the card in the system definition file, it gives the error message even if I turn off the single-point support timed by the hardware.

  I went back to the documentation for the Web site and I couldn't find a place where it says you need a card PXI for controlling SCXI cards but that the PXI card controls became useless.

  I'm doing something wrong?

  Thank you.

  Dear Claudio_G,

  That should really be a limitation in VS2011 because there are future news added since VS2011.

  And the reason why it works in the custom device could be the one custom unit as PXI6221 and SCXI1540 are separated internally in which the task and VS that it works in the same task.

  Then when it works properly in the custom device I recommend to use this way or other wise update to VS2013.

  Kind regards

  Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. |

• Logging data source expressions

  Hello

  We use NI TestStand 2012 here in our society, and I have a simple question.

  In any test pass/fail (numeric, String, pass/fail regular), is it possible to have the TestStand to include the data source expression in the default report?

  I can add it manually in the component "Other results", but I have to do for each step.

  I see that on conditional expressions and flow measures are included in the report, but not the my expressions of pass/fail, which are found in the data source tab.

  It seems obvious to me that the data source should be there, otherwise I just in the report the name of the step and the result and no information of what has been actually tested.

  Thank you in advance!

  Leandro

  It does not show what the '10' value means: speed, voltage, current, RPM, etc. unless we call actually step in this way.

  Thanks again.

  There is a 'units' set numerical limit markets which addresses this problem. You can even specify custom units if you would like, although there are many built in those you choose as well. Also the name of the step should usually give an idea of what exactly is being tested.

  For the recording of Boolean expressions, probably the simplest thing is to use a stage model that is preconfigured to connect to the data source, or you can create a new custom step based on the test of success/failure that connects to the default data source type, or you could write a tool that passes through the sequence files and change all tests pass/fail to connect their datasource.

  -Doug

• How would you apply different calibrations on different channels

  I'm looking to apply the calibration data to multiple channels. The calibrations could be made at different times for different channels and could be using different adjustments. I think I have a solution to just apply the calibration on a channel information. I will post the solution for a path in this post. In the next post, I'll include the multi-channel problem that I'm trying. I had to add txt on the original file for this post.

  Thanks in advance.

  Hi Eric,.

  Glad you were able to get this working.  The links I sent show how to use the DAQmx driver for data scaling with custom scales which should be easier and more maintainable method to do the same thing (with the exception of not being able to use logarithmic scales).  Be sure to check out them to see if it's something you'd be interested.

  If the code you have posted just works the way you want, I see no need to make changes - you can consider using an array of clusters for organization and clean up some of the wiring.  As a minor point, the County of loop terminal must not be wired on your first loop for, since the entry is indexed auto.  Personally, I would have used the DAQmx scaling feature described in the links to my last post, but since you already working there should not be problems with using this method.  If you have any questions or specific issues come up please let us know.

  -John

• Photosmart 7520e printer all in one

  I was delighted when the HP customer service (day of week) helped me to set up the printer so that I could print my email.   That's all I wanted to do.   It was working fine...  Until I started to print some of the options intriguing on the LCD (I bought this 7520e in May...  It's me that me handles with it now...  Only connected to my WiFi router network, or else, last week...  Thanks for this CS HP)

  There was a little too much actually printing... I had pressed the loads of options on the LCD screen...  More than 3 dozen...  So I just pressed the red X for "Cancel printing"...  After that when I sent my email to the address @hpeprint it is impossible to print!    Before you press "Cancel printing" it worked flawlessly.

  I tried everything...  Subsequently pressing factory reset... It was bad because I seem to have lost the address @hpeprint for my printer that I chose at the start... The new code to put in place the new address @hpeprint...  Should work, but...  Computer says NO!

  Needless to say I'm on a learning curve big when it comes to printers and Windows 8.1 (only to be used in smartphone and Tablet B4)

  Any help at all would be greatly appreciated!

  Hello @AbsolutBeginner,

  Welcome to the Forums of HP's Support.  I understand that you have recently done a factory reset on your printer Photosmart 7520 and lost your ePrint personalized e-mail address.

  There is no way to retrieve your previous custom ePrint email address, once said that is no longer available to claim again.  You will need to create a new ePrint personalized email address.

  With regard to all print jobs that you try to cancel, looks like you had accidentally subscribed to several applications print on the front.  I've included the document How to access and change sheets printable by HP connected for reference.