retrieve values, regardless of the case

Similar Questions

• T420 does not take into account the case of letters power on password

  Hello!

  just noticed that when I boot my laptop with power on password, it accepts the password regardless of the case of the letters I get. For example, if the password is set to "qwerty" it starts with "qwerty", "QWERTY", "qWeRtY", "QWErty" and so on. It is the same for the HARD drive password. Is this a bug or a feature?

  T420 4178

  BIOS 1.30

  Fingerprint authentication enabled

  It's just how it works.  The BIOS passwords actually use these keys scancodes, and not the ASCII representation.  In this implementation, the modifiers (for example, the SHIFT key) are ignored.

• Where the Case Insensitive component of research at the University Complutense of MADRID 11 g?

  Hello
  
  
  I have this 2008 document that says there is a file OracleCaseInsensitiveSearch.zip through which I can activate a component that helps looking for a content id regardless of the case.
  
  
  But I can't seem to find this thing. Can anyone help please?
  
  
  Thank you.

  For 10g, it's in the 'extras' folder in any component of UpdateBundle (90 MB).

  However, it is not that it is in the last patch of 11 g (263 MB).

• How can I sort the selector non-unique values and make them unique in the structure of the case?

  I want to clarify 3 ranges as breeders of the case.  For example, I am able mV and I want 0.10, 10.20 and 20.30, but, when I enter them in this way, I get an error that says that the selection values are not unique.

  I want case to answer when the input is greater than 0 but less than 10.

  I want the second case to react when the input is greater than 10, but less than 20.

  I want the third case to react when the input is higher than 20, but less than 30.

  And there is the case by default, 0.  The case structure think my default is bunk with my case?  How a list correctly these ranges in the Tag Chooser structure cases to avoid the error?

  Also, I plugged in my blood "to LONG integer" and then to the Terminal case structure to convert entire for the entry of case structure (blue wire).  Is it the right thing to do, because my values of tension will certainly be decimal numbers, not integers.

  Before converting in I32, for example, use "turn to + inf" and settle the case accordingly.

  (A plain to_I32 rounds to the nearest integer, making it impossible to meet limits).

• Event Structure... the mouse down or to the cases of change of value

  I feel, it is a simple problem, but I can't seem to find a solution.

  I have a VI that is supposed to communicate with a stepper motor drive.  I'm working on the Boolean setting keys on the Panel before (acting as of the momentary switches) that will jog the hourly engine or counterclockwise, as long as the button is pressed.  Once the user releases the button, the motor should stop jogging.

  I tried to use the mouse down and value change event.  With the help of the mouse down, for some reason, the time-out occurs almost immediately even while holding the mouse on the button.  This translates into what seems like nothing is happening.  Although the engine receives all orders he has to run, it receives the stop command immediately after.

  Using the value change case, the procedure works and the motor turns, but when you release the button (another change of value), all orders of jog are returned to the engine stop control tracking.  Sometimes the motor continues to run after the shutdown command has been sent, and I think that might be involved because it receives all the shortening of orders (again) and the judgment of control both.

  Is it possible to cnage my case event to run the way I want to what he... Send commands to the button click on... Send different command button.

  Thank you.

  Thanks for the suggestion...

  I could solve the problem I had.  Previously, I was trying to display the timeout to-1 to a value greater than 0 to launch the timeout on a button release event.  To solve the problem, I just removed all of the code that has been changing the value of timeout and left the default to-1.  I also removed all the code in the case of timeout.  Then, I created a new mouse event that is fired by releasing one of the buttons and copied in the code that used to be in the case of timeout.

  Now, the works of VI exactly as I need to... where an event occurs on a mouse a click of a button and a different event happes when the button is released.

  A very simple solution, however I've only worked in BT for about a week and I have not seen the mouse event when I scroll to the event.

• write the multiple value series buffer using the structure of the case

  In this VI, I am generating waves by using the sliding bar. After that I compare it to a value as 0.6. If the value of wave is higher than 0.6 then led flashes and structure case written 1 value serial buffer. If it is less than 0.6 became led off and structure written case value 0 in the stamp series. now, I want to add another condition if the chart value is between 0.2 to-0.2 written structure case 2 series buffer value. can you tell me how can I do this?

  
  

• Structure of the case: selector values are not unique

  Get the error: case Structure: selector values are not unique...

  With the help of producer-consumer architecture w / SW-events and comms of queue.  DevSuite - LV2014

  My loop of consumers use a typedef for case selection control.  The typedef is an enum and the names of text for each value.  All my files are in quotes and there are no duplicates in the typedef or structure of the case.

  Help

  JF

  Jeff.F wrote:

  Get the error: case Structure: selector values are not unique...

  With the help of producer-consumer architecture w / SW-events and comms of queue.  DevSuite - LV2014

  My loop of consumers use a typedef for case selection control.  The typedef is an enum and the names of text for each value.  All my files are in quotes and there are no duplicates in the typedef or structure of the case.

  Help

  JF

  I don't know what you're doing exactly what I think. Do not write text in quotes for values box. Wire the enum in the switch case, right-click on the structure of the case and select "add a case for each value.

  It might be a little different because I'm teliing memory.

  Ben64

• Value of cluster lost when you leave the structure of the case

  Hi all

  I'm having a problem with a particular VI I'm working. (FYI it's in Labview 8.0)

  The VI is set to run a current source, voltmeter and thermometer, then recording and graph the data in various ways that can be selected by the user.

  Everything seems to work fine except a particular graphic method. When I try to graph current compared to the tension, the current value is lost estates. In a case the current and voltage are combined to form a cluster, and then leave the case structure to be later appended to a table of cluster.

  However, the value of the cluster is lost when the chart is set for the voltage vs. Any other method and it works correctly.

  I can't understand why this is happening as it does not make much sense than other methods of work charts, but this one isn't when it is coded the same exact other than having the different variables.

  I have attached the VI with added indicators showing that the value of cluster is lost once he leaves the box structure. Any help would be appreciated.

  Thank you very much and I apologize for my extremely messy VI.

  -Nathan Cernetic

  You really need to boil this down to something we can run and reproduce the problem.

  Have you tried to break a few relevant connections and rewire? Something is possibly corrupt.

  Besides being a mess, your VI has quite a few glaring errors.

  Let's take a look at the structures at the top right:

  • 90% of the code is the same in all the structures of three cases, so all that needs to be inside the structure is the small part where you built the table 2D. All the rest is outside of the case.
  • The structure of the sequence has no useful function.
  • Why do you need to reverse the table with each iteration of the small loop FOR? Once before the loop would be sufficient. Right?
  • Why you use table built inside the small loop FOR, but no autoindex on the edge of the loop? All you ever get is an array containing exactly one element, no matter how the loop runs. Seems unnecessary! (see below for an alternative image).
  • You wouldn't even need to reverse if you want to use "built the table" instead of "insert into the table at position 0" in the central part.

  

  Other: You constantly hammer all nodes of your property. The only need that will be called when things change. Again, you have far too many cases. For example, in the structure of the case where you are having problems, the same nodes of property exist in all cases. A single instance of the property node belong outside the case and only the string inside each case constants. Whenever the code is the same in all cases a case structure, which code belongs to the outside!

• RandomGen elements, case structure nothing if it's false, while the loop passes iterations, can not get the values in table outside the structure of the case

  Hello!

  I tried to build a trigger that triggers a true value each 1000 milliseconds (from the first real);

  which real command structure box to a value of the randomNrGen of the sample and place it in a table.

  but I would like to USE this table and I can't do this beacause I can not get out of the structure of the case.

  AND:

  the while loop ignores samples; If you run the vi and look at the speed at which the table fills, ypu notice it is not periodic: the first few items are inserted at 1 second interval, but then it jumps one;

  would it be because of the wait time 1ms?

  1. How can I create a structure that does this:

  If set to True, it samples a value from Genesis at random and places it in the table

  OTHERWISE, it does NOTHING, without zeros sent to the table just waiting for the next true and only the values sampled at True remain in the table?

  2. How can I stop it pop samples (multiples of 1000 in my case)?

  In conclusion: I need to be able to take samples on the sample generator and store them in an array of 3d in a zig - zag (1.jpg) way, but able to think about it, we need to go beyond these two questions.

  Please ignore the meter.

  Please help me!

  TibiG wrote:

  Thanks, Crossrulz!

  This did not omit all values and it works fine.

  Is it possible to get information in a case without making use of the large loop?

  My program will become very complex (I need to synchronize a magnetometer and a stepper motor to make a 3d map of the magnetic field of the magnet) and I want to do everything as simple as possible.

  If there is a way to get information about a case structure, other tnan using registers with shift on the big loop, and you know it, please show me.

  Thank you!

  You could also use a Feedback node, just keep it out of the structure of the case.

• Hold the last value on non-logged tunnel in the structure of the case

  I have a case as true/false structure below. I use it to run code when the entry is set to true. False condition is empty.

  After some Calc I have tunnel the value out, I wish the false condition to hold the same value.

  How do I get there?

  Use default if unwired returns a 0 I want.

  Thank you

  

  hydzik wrote: the register shift where can I create?

  I guess that this runs inside another loop.  You put the shift on the loop register.  If this isn't the case, then use a feedback node.

  

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• Duplicate values are returned by using the case statement

  Hello PL/SQL gurus and experts.
  
  I use Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64-bit Production version
  
  I am currently stuk with problem with the case values in double - displayign
  
  Once I am using the following query (join of two tables)
  

  select t.student_nm,
  f.Test_RNK,f.Exam_rnk
  from class_fact f,
  method_dim   t
  where t.method_key = f.class_key 
  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'

  It gives the student name and corresponding test and review
  
  But if I use it as a query, then it displays a lot of values in double.
  

  select t.student_nm,
  (case when trim(upper(F.date)) between '20120101' and '20120631' and trim(upper(F.DE)) = 'H' then
                     F.Exam_RNK
                    else
                     0
                  end
                  ) yrrk
   from class_fact f,
  method_dim   t
  where t.method_key = f.class_key 

  I can do stupid mistake but kindly suggest me.
  
  Thank you

  Why you have removed the bottom two filters in the second query?

  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'
  

  CASE filter your data. USED in your SELECTION list will be only to manipulate these data for the particular column.
  You must keep your filter because it is, if you expect the reords even to return

  Your request must therefore

  select t.student_nm,
  (case when trim(upper(F.date)) between '20120101' and '20120631' and trim(upper(F.DE)) = 'H' then
                     F.Exam_RNK
                    else
                     0
                  end
                  ) yrrk
   from class_fact f,
  method_dim   t
  where t.method_key = f.class_key
  AND F.DE='H'
  AND F.Date between '20120101' and '20120631'
  

  Published by: JAC on October 12, 2012 19:08
  1. is it a running query? You use DATE as column name?
  2. why you store data to date as strings?

• retrieve a NEW VALUE rather than the OLD VALUE when firepartialaction called even

  Hi gurus of the OFA.
  
  I have an advanced table where to enter a value. This table is populated using vo.
  
  (1) now I have a firepartialaction with a parameter with one of the columns of the table.
  (2) I noticed that when I change a value and the hover out of this column, the parameter returns the OLD value of the table.
  (3) the question is, how do I get the new value? If the creation of a parameter for the firepartialaction event will NOT recover the NEW value, what is the best why to get it back!
  
  Thank you!

  In the settings of the firePartialAction, you must by the way some settings for the resulting values in the CO.
  In general, the format is ${oa. ViewInstance.AttributeName}

  For your case try using ${oa.*current *.} AttributeName}
  This will give you the new value.

• Assiging the values of parameter in CASE

  Hi all
  I'm writing the Expression BOX in the following way.
  
  CASE WHEN entered. Field1 < = Input.Field2 then
  Input.Field1 = Input.Filed2
  ON THE OTHER
  Input.Field2
  END
  
  During the validation of Expression it throws the error. Could you tell me please me is possible to write the expression to assign values of parameter input/output field.
  If so, please explain. If this isn't the case, suggest me work around.
  Thank you very much
  See you soon!
  -MAK

  He likes to change...

  CASE WHEN input.Field1 <= Input.Field2 then
  Input.Field1
  ELSE
  Input.Field2
  END
  

  If you created this in the output of expression variable say 'out_1' and then
  so if the entry. Field1<= input.field2="" then="" value="" of="" out_1="" will="" be="" input.field1="" else="">

  See you soon
  Katia

• Retrieve XDB$ index not the text ENUM_T values

  All,

  I have a type xdb xml element $ enum_t where I can't find a way to get the text associated with the index value. The only way I seem to be able to get the index value is through the point object relationship (.value) notation. It gives me the index value of the list of restriction. I saw another post referring to the same question, but never responded. I need this xml element limited by this list. Any help or ideas appreciated. I'm using Oracle 11 g.

  Thank you

  Tom

  Hi Tom,

  It is not the right approach for what you are trying to reach.

  XDB$ ENUM_T is internal stuff that is not intended to be handled directly.

  Always use the XQuery/XPath functions to access the node values.

  I need this xml element limited by this list.

  What you mean?

  Object-relational storage via an XML schema that you use? If so, what is the problem?

  Could you put a small suitcase to test?

  Thank you.