Returns the data type of XMLTYPE 1111 rather than 2009

Similar Questions

• How to return the data type complex of a synchronous BPEL process

  Hi all
  I have created a synchronous BPEL process, so a partner customer link was automatically created in the project. Now the link partner of this client is to have input and output variable of type normal string where as my BPEL process finally returns a complex data type.
  In order to solve this problem, I took a processing activity and mapped the collection [variable returned by my BPEL process] to the chain of production of the customer but in this way I just get a single string to store the entire collection but I want that they separately.
  
  Can someone tell me, how to manage this scenario.
  
  Concerning
  Lokesh

  After creating the partner link and the invoke (to create the variables), change the element type of the response message to the complex type definition of your collection that appears in the XSD. You can do the same thing if you want to change the element type of the payload of the request message as well.

• Get the Data Type of queue

  I'm working my way through my first vi producer consumer and I have two questions.

  1 I am the queue data x, y samples acceleration waveform type z. The code snippet shows how to set the data type in the queue to get. It is rather ugly and disturbing, even if it seems to work.  Is there a way more elegant and beautiful to set the data type?

  2. the sampling frequency of the accelerometer is 5120 Hz.  The DAQmx Read buffer is 1024 length samples.  Therefore, it takes 200 [ms] to fill the buffer.  I put the metronome 100 [MS] to ensure that the producer is not without samples.  This means that the loop While producer will spend much of its time waiting.  Right?  Given the wait cost anything?

  In ProducerConsumerExample.vi of LabVIEW, the sampling frequency is 10000.  The size of the read buffer is 1000.  And the metronome is set to 100 [ms].  The sampling frequency of the device comes from the hardware device in the cDAQ.  100 [ms] interval comes from the PC.  It will not be a mismatch?  I would like to understand this before I put my metronome to 200 [ms].

  

  Arizona_Joe wrote:

  Then, can shed you some light on the behavior of the loop while you mentioned is not a metronome that is is punctuated by DAQmx? I think it would do a lot of rotation.

  It is not spinning as he waits inside the DAQmx Read for samples N must be obtained.  This isn't a request for data.  It takes time to collect these samples.  That length of time depends on your sampling rate and how many samples you request.  So because he is waiting inside the DAQmx Read, there is no need to add an additional wait.  Let the DAQmx Read limit the rate of the loop.

  It's actually like the loop of consumer for the consumer to the producer.  Playback of the queue will limit the rate at which that loop runs.  It should therefore no waiting.

• Modification of the data types of the custom shared variables

  My application includes a library containing a number of shared single process variables. I use type defs to create the shared variable "of the custom control." I know that shared variables do not-automatic update since the type defs, so I'm updating shared variables (data type, do a right click, properties) whenever I update the type definitions.  However, if I make a change to a type design that does not change the data type, for example to change the labels controls, these changes will be reflected in the shared variable.  The data types of variable window shared list contains entries for each previous update, which indicates he uses the previous entries.  How can I make the window of properties of shared variables 'forget' my previous defs type wandering without deleting the variable total? Withdrawal and replacement would be troublesome because the done variable references throughout my project.

  Thank you

  Wes

  The variable is not in the Distributed System Manager, or Manager of the Variable, and cancellation of the deployment has not been resolved.  However, I found Labview from closing completely and reboot clears the memory of the previously used custom data types that sees the library.  Thus, the effective workaround I found is:

  1 make a significant change to the data type of the type (per your suggestion) FED. Record.

  2 - redefine the variable screw-notice type FED.

  3. save the project. Close and restart labview.

  4 - the old def type is now disabled.

  5. return the significant change of the def type, implement trivial change and save.

  6 redefine the variable using the type correct now def. Viola!

  Thank you!

• table col name get the details of the table column and inserting of values depending on the data type of the column

  Hello

  I am train to write a procedure where I would spend the table as a parameter name and then the code would determine it is column names, and then he would insert records in each column depending on the data type. could someone help me with this.

  Thank you

  SM

  Hello

  Perhaps you need to dummy data just for the table.

  Here is my exercise

  create or replace
  procedure generate_rows(p_table_name varchar2, p_count number)
  is
    --
    function insert_statement(p_table_name varchar2) return clob
    is
      l_columns clob;
      l_expressions clob;
      l_sql clob default
        'insert into p_table_name (l_columns) select l_expressions from dual connect by level <= :p_count';
    begin
      select
        -- l_columns
        listagg(lower(column_name), ',') within group (order by column_id),
        -- l_expressions
        listagg(
          case
          when data_type = 'DATE'
            then  'sysdate'
          when data_type like 'TIMESTAMP%'
            then  'systimestamp'
          when data_type = 'NUMBER'
            then  replace('dbms_random.value(1,max)',
                    'max', nvl(data_precision - data_scale, data_length)
                  )
          when data_type = 'VARCHAR2'
            then  replace(q'|dbms_random.string('a',data_length)|',
                    'data_length', data_length
                  )
          else
                  'NULL'
          end, ',') within group (order by column_id)
      into
        l_columns,
        l_expressions
      from user_tab_columns
      where table_name = upper(p_table_name);
      --
      l_sql := replace(replace(replace(l_sql,
        'p_table_name', p_table_name),
        'l_columns', l_columns),
        'l_expressions', l_expressions);
      -- debug
      dbms_output.put_line(l_sql);
      --
      return l_sql;
    end;
  begin
    execute immediate insert_statement(p_table_name) using p_count;
  end;
  /
  
  -- test
  create table mytable(
    id number(4,0),
    txt varchar2(10),
    tstz timestamp with time zone,
    dt date,
    xml clob
  )
  ;
  set serveroutput on
  exec generate_rows('mytable', 10);
  select id, txt from mytable
  ;
  drop procedure generate_rows
  ;
  drop table mytable purge
  ;
  
  Procedure GENERATE_ROWS compiled
  Table MYTABLE created.
  PL/SQL procedure successfully completed.
  
  insert into mytable (id,txt,tstz,dt,xml) select dbms_random.value(1,4),dbms_random.string('a',10),systimestamp,sysdate,NULL from dual connect by level <= :p_count
          ID TXT
  ---------- ----------
           3 WnSbyiZRkC
           2 UddzkhktLf
           1 zwfWigHxUp
           2 VlUMPHHotN
           3 adGCKDeokj
           3 CKAHGfuHAY
           2 pqsHrVeHwF
           3 FypZMVshxs
           3 WtbsJPHMDC
           3 TlxYoKbuWp
  
  10 rows selected
  
  Procedure GENERATE_ROWS dropped.
  Table MYTABLE dropped.
  

  and here is the vision of Tom Kyte for the same https://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2151576678914

  Edit: to improve my code, it must use p_count as bind as Tom.

• Display the data type of a column in the status bar

  Hi all

  n pl/sql developer, when I select a column in a table.

  If I clicked with the mouse on the column in the query results box, it shows me the type of data and the size of the column in the status bar

  Developer SQL does not by default,

  is there an option I can change to do the same task?

  Thank you

  No, you will need to open a popup DESC of the query to see the data types of the data returned.

• The number of bytes is the data type of "pixel"?

  I'm relatively new to use Pixel Bender to process audio data, so I'm sorry for my lack of understanding of what follows.

  I had a question about the data types 'pixel' and 'image' Pixel Bender.

  I'm trying to understand code Kevin Goldsmith has written for his mixer 2 channels of audio and there seems to be a gap between the amount of data sent to the shader of PB, and the amount received when the buffer is sent to her for treatment.

  Here is the link to the code:

  http://blogs.Adobe.com/Kevin.Goldsmith/2009/08/pixel_bender_au.html

  At the top of the code, it says a "BUFFER" of 2048 constant:

  private public static var Buffer_size : uint = 0 x 800;

  Then, in the processSound() function, he implemented an byteArray with a size of 16 384 bytes:

  shaderBuffer. length = BUFFER_SIZE * 2 * 4;     <---(échantillons stéréo 2048 * 2 * 4 octets/échantillon)

  However, I am confused about the part where it defines a hypothetical image and sends the data to the shader:

  effectShader. data ["source"] . width = BUFFER_SIZE / 1024;     <---(2048 / 1024 = 2)

  effectShader. data ["source"] . height = 512 ;

  From the code above, one can easily see that the size of the image is only 1024 "pixel" (2 * 512), and on the receiving end there is a "image.4" of variable entry expected to receive.  So far, I was under the assumption that a data type "image4" consists of a variable amount of pixels (determined by the size of the image that is food inside), each composed of 4 layers of color of 1 byte.  In this logic, each pixel in a data type "image4" should consist of 4 bytes.  Now, let's do the math: 4 bytes * 1024 pixels = 4096.

  4096 is not equal to 16 384!

  How can feed you a 16 384 'byteArray' bytes in a variable "image4" of 4096 bytes?

  I'm sorry to seem presumptuous to the explanation above, but I can not understand what is happening here!

  The number of bytes is a 'pixel' in PB?  He holds float or integer values or both?

  I've scoured the web to find these answers, but nothing helps!  Maybe I'm off the mark with my current understanding of the pixels and images in PB, but I need to understand this before I can move with the application that I do.

  I am very grateful of any advice or information that someone can give.

  Thank you

  Matt

  This is the Pixel Bender Language Reference:

  "pixel1: represents the value of a single channel of an image." The name distinguishes this
  single element pixel of a pixel which contains several channels. The pixel values are
  considered as 32-bit floating-point numbers. »

  32 bits = 4 bytes

  If a channel is four bytes rather than that you have accessed. If this should explain the difference.

• To change the data type of control/led

  Is it possible to change the underlying data type of the indicator or a control?  I a VI that I want to use that accepts any type of data (essentially data varriant) and display it accordingly.  I have different controls selected to display data of different types in the sense of data vs decimal boolean data vs integer, but certain types of data will be of type uint32 vs int16 vs uint64 etc..  Is it possible to programmatically change the data type, so I need to have all the combinations of indicators?

  The short answer is no. The long answer is that LabVIEW has not 'generic' controls that allow you to display any type of data (apart from the variant of course). There are several ways to address this problem, but all require you as the programmer to manage explicitly each type of data you could possibly meet. Here are some possibilities (in no particular order), please let me know if you would like to help a particular implementation of these.

  1. Force incoming data to variant, use the info option to determine the data type of the original data in a case structure (open G can do this VERY easy), have an indicator on the front panel for each type of data you want and hide those unused
  2. Use a sub-group of experts on the front panel and sub - vi call of to view specific types (that lends itself very well to encapsulate your data in a class and you leave OOP allows to expand into different types of data)
  3. Use a tab with the variant (similar to option 1) control put each kind of data in its own tab, enable only the current
  4. Do a Control-X to accept a Variant option 1 under the hood
  5. Just as a string of format and use a string indicator

  That's all I can think of right now, once again, let me know if you need more information/help on the options.

• Is it possible to get the data type of element of a queue to itself?

  Hello world

  I have a Q which has a cluster as data type of element.

  now when I want to enqueue

  I will use bundle-default-

  and for this I have to have my current data type

  (long cable as (perhaps after where I got the Q).

  My question is,

  If there is a method/property-node/something that allows me to

  the queue of wire inside Refnum and receive the data element type.

  If I can get into the top of bundle-default?

  (I really want to have this cable in all directions)

  is this the reason why I'm asking here

  aid for the Refnum of outgoing queue to get a queue, the method

  indicates the data type of element and so I hope that there could be a solution.

  thx for your time

  and soon

  j

  Get queue status must be output with the type of data (more precisely an array of the data type and an array of clusters if the data is itself a table). If you do not set the items back to entry to T, this should not even cost anything.

  That said, I agree with others that it is better to what actually a typedef.

• Change the Data Type to node e/s on PXI-7841R FPGA

  I would like to change the data type for the node FPGA of e/s on my card FPGA 7841R (simulation). So far, I have raw data (I16). I want to test something with the calibrated data (FXP).

  The cRIO, you usually go to the properties of module to change the calibration mode...

  I searched 7841R documentation and could not do any weather information this calibration mode was also available on this map.

  Any tips?

  Vincent

  The new maps in the series R offer node fixed point IO (for example, the SMU-7858R), but as mentioned all the old PXI based cards R-series offer only modes of measurement I16.

  Page 22 manual R series is about how to do this conversion: http://www.ni.com/pdf/manuals/370489g.pdf#page=22

  Specifically, it notes that you can calculate the voltage by (output Code I16) * 10.0V / (32 768).

  Even if this can use FPGA resources, it records the host do the same conversions. RT old target with slow processors doing the conversion of I16 or FXP to SGL on the FPGA has saved a lot of time CPU

• What is the minimum value for the data type double?

  ... a more academic question: what is the minimum value of the data type double? I thought 'double', it is the 8-byte IEEE standard and what I remember, it's + - 1.7E + - 308.  The more different number of 0 should be 1.797E - 308.

  This is why I was a little surprised when I looked at the data output of my calculation of CVI, where I found the numbers with exponents of E-319 or E-324 as the smallest value...

  But I'm sure there's an explanation :-)

  Thank you for sharing with me,

  Wolfgang

  The largest number is indeed the order of + 1.7E + 308; There are a smaller number of - 1.7E + 308. Note that this is in fact the most negative number, which is the smallest by some reckoning. For the small beach of the Exhibitor, things get a little more complicated. 1E-308 can be represented with complete accuracy and resolution, but if you're willing to lose a few bits of precision, you can go down even further. For example:

  Double x, y, z:

  x = 1E-300;

  y = 1E7;

  z = x / y;               Give 1.000000000000000E - 307

  y = 1E8;

  z = x / y;               Give 9.999999999999999E - 309

  y = 1E18;

  z = x / y;               Give 9.999987484955998E - 319

  y = 1E23;

  z = x / y;               Give 9.881312916824931E - 324

  So, as you can see, values less than 1E-308 are possible, but they become increasingly more inaccurate and should not be relied upon.

  JR

• Hello friends, I want to know what the data type can be declared in pl/sql, but cannot be declared in sql?

  Hello friends, I want to know what the data type can be declared in pl/sql, but cannot be declared in sql?

  Hello friends, I want to know what the data type can be declared in pl/sql, but cannot be declared in sql?

  That question is ambiguous: there is NOT a SINGLE type of data that can be declared in pl/sql, but not in sql.

  The Oracle documentaton is your friend.

  The doc of the SQL language treats the SQL data types.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28318/datatype.htm

  The doc PL/SQL does PL/SQL data types. Because PL/SQL is a language of proceedings (and sql is NOT) there are several types of data, as shown in this doc, PL/SQL-specific:

  PL/SQL scalar data types are:

  • SQL data types
  • BOOLEAN
  • PLS_INTEGER
  • BINARY_INTEGER
  • REFCURSORexplained in "Cursor Variables"
  • User-defined subtypes

  ALWAYS start with the Oracle documentation for these fundamental questions.

  Several times, as with this question, the question is too general to give a simple answer.

• How to configure a web service primavera to return the data in the second database?

  Hello world

  
  

  We have P6 with WS first deployment on a single weblogic domain server. The first WS returns the first instance of database data.

  Then deployed to the WS second tip on a weblogic domain server separated with a different port. Set up the second WS with < WS2_INSTALL_HOME > / bin/dbconfig.sh, creating a new branch a configuration that specifies one second instance of the database. However, this configuration is ignored, and the second web services return data from the database.

  We have a single domain, including notably the following servers:

  Name / host / Port / deployments

  P6 / localhost / 0001 / P6 (v8.3), p6ws1 (v8.3)

  p6ws2 / localhost / 0002 / p6ws2 (v8.3)

  We have now two different files BREBootstrap.xml.

  P6 BREBootstrap.xml:

  < database >

  < URL > JDBC:Oracle:thin:@db1:1521:db1 < / URL >

  < user name > pubuser < / name >

  password <>anycriptopass1 < / password >

  oracle.jdbc.OracleDriver < driver > < / driver >

  < PublicGroupId > 1 < / PublicGroupId >

  < / data >

  < CfgVersion > 8.330 < / CfgVersion >

  <>configurations

  < name BRE = 'P6 Config_DB1"instances ="1"logDir ="anydir, P6EPPM, p6, PrimaveraLogs"/ >

  < / configuration >

  p6ws2 BREBootstrap.xml:

  < database >

  < URL > JDBC:Oracle:thin:@DB2:1521:DB2 < / URL >

  < user name > pubuser < / name >

  password <>anycriptopass2 < / password >

  oracle.jdbc.OracleDriver < driver > < / driver >

  < PublicGroupId > 1 < / PublicGroupId >

  < / data >

  < CfgVersion > 8.330 < / CfgVersion >

  <>configurations

  < name BRE = 'P6 Config_DB2"instances ="1"logDir ="anydir, P6EPPM, ws2, PrimaveraLogs"/ >

  < / configuration >

  "P6 Config_DB1" and "P6 Config_DB2" including the property database for the database 1 and 2 respectively.

  How to set up a second web service to return the data to the second database?

  
  

  Thanks in advance!

  
  

  Kind regards

  Dmitry

  So, answer oracle support:

  Looks like it is in the documentation, Web Services cannot be configured in this way as the other modules. See the following topics:

  BUG 19516437 - Is it POSSIBLE TO hardcode a DEPLOYMENT of SERVICES WEB P6 to an INSTANCE of DATABASE? (ask if this is possible)

  BUG 19579735 - FOR BEING ABLE to hardcode A P6 WEB SERVICES DEPLOYMENT to A DATABASE INSTANCE (corresponding improvement because it can be done).

  The problem has been resolved by the following:

  1 create the WebLogic domain.

  2 P6 and p6ws deployed on managed servers.

  3 configuration P6 uses the second instance of database and P6 has not begun.

  4 result: the p6ws (from additional domain WebLogic) returns data for the second instance of the database.

  Kind regards

  Dmitry

• script to change the data type of column

  Hi gurus of the oracle.

  I have 190 tables in my database.

  I have the column type CHAR of all these tables data.

  I need to change the data type of CHAR in VARCHAR2 for all these tables...

  There the script to change the data type of all tables at once?

  Please help me in this regard.

  Thanks in advance

  Concerning

  REDA

  Hello

  There is nothing built-in to Oracle SQL to do.  Maybe your front-end has certain characteristics.

  You can write dynamic SQL statements to do.  In other words, you can write a query that the output is a SQL script like this:

  ALTER TABLE TABLE_A CHANGE (A_TXT1 VARCHAR2 (5))

  A_TXT2 VARCHAR2 (10));

  ALTER TABLE TABLE_B CHANGE (B_TXT1 VARCHAR2 (5));

  with one row for each column of type CHAR.  Notice how the first line of output for each table begins with ALTER TABLE... but the later lines at the same table.  Similarly, the last line of a table (which will be the same as the first row, if the table has only one column of type CHAR) to end with a semicolon, but other lines are not.

  Here's a way to generate and execute such a dynamic script in SQL * more:

  -Disable the features that make the output easy to read, but hinder the execution
  SET FEEDBACK OFF
  SET LINESIZE 500
  SET PAGESIZE 0

  -Create fix_char.sql
  COIL c:\some_pathename\fix_char.sql

  SELECT THE CHECK BOX
  WHEN ROW_NUMBER () OVER (PARTITION BY table_name
  ORDER BY column_name
  )  = 1
  THEN 'ALTER TABLE ' | table-name
  || "CHANGE (").
  ELSE «»
  END
  ||        column_name
  ||        "VARCHAR2 (').
  ||        DATA_LENGTH
  ||        ')'
  ||        CASE
  WHEN ROW_NUMBER () OVER (PARTITION BY table_name
  ORDER BY column_name DESC
  )  = 1
  THEN '); "
  Output END AS
  Of user_tab_columns
  WHERE data_type = "CHAR".
  ORDER BY table_name
  column_name
  ;

  SPOOL OFF

  -Turn on the features that make the output easy to read, but hinder the execution
  SET FEEDBACK ON
  SET LINESIZE 80
  SET PAGESIZE 50

  -Fix_char.sql performance
  @c:\some_pathname\fix_char

  It's good to change all the CHARIOT of VARCHAR2 columns.  The CHAR data type is nothing trouble.

• change the data type of column in a view

  Hi gurus,

  Please suggest.

  
  I have been created as below in the region of production.

  CREATE OR REPLACE TYPE PROD. (OBJECT) ACE FEATURE_CUSTOM_LIST_OBJ
  TERMINAL_FEATURE_ID NUMBER (8).
  DATA_VALUE NUMBER (8)
  );
  /

  
  And the view is created below the base have the PROD. FEATURE_CUSTOM_LIST_OBJ

  CREATE OR REPLACE FORCE VIEW PROD. TERMINAL_FEATURE_TYPE
  (
  TERMINAL_FEATURE_ID,
  DATA_VALUE
  )
  AS
  SELECT
  TERMINAL_FEATURE_ID,
  DATA_VALUE
  TABLE)
  CAST)
  PROD. TERM_RELATED_REF_DATA. GET_TERMINAL_FEATURE_TYPE AS PROD. FEATURE_CUSTOM_LIST_TAB));

  Examples of data must be inserted into the display

  TERMINAL_FEATURE_ID	DATA_VALUE
  12	0
  12	1
  12	3
  11	THERE
  11	N

  If iam thinking is possible that we can change the data type of number of varchar2 data type column in a view?

  Or should I follow create or replace type as whenevr the nonnumeric data tries to bring into view
  sound by giving the number plsql for digital character conversion error since it is a number of data type here.

  I have been created as below in the region of production.

  CREATE OR REPLACE TYPE PROD. (OBJECT) ACE FEATURE_CUSTOM_LIST_OBJ

  OK - but it is a SCALAR - not a collection object

  And the view is created below the base have the PROD. FEATURE_CUSTOM_LIST_OBJ

  CREATE OR REPLACE FORCE VIEW PROD. TERMINAL_FEATURE_TYPE

  No - it isn't. Your type of object is a SCALAR - not a collection. You need create a view on a table or a collection that is treated as a table.

  DDL perspective you posted doesn't even mention your FEATURE_CUSTOM_LIST_OBJ.

  If iam thinking is possible that we can change the data type of number of varchar2 data type column in a view?

  Have you tried using TO_CHAR to format the number as a string?