Reviews for ASA security

Similar Questions

• Review of CCNA security

  My review of CCNA will expire January 2, 2015. I am interested to take the exam for CCNA security this month and I hope it will go for security CCNP after that... I have a few questions

  (1) there is only one available exam IINS 640-554 ?

  (2) if I passed this exam, my certification will be valid for the next two years, because I read somewhere that CISCO is retiring from tests in the coming years.

  (3) my CCNA routing and switching certification will remain valid after clearing this exam?

  (4) I am able to go for the CCNP security after clearing this exam?

  so if someone can guide me in the right direction, I will be grateful. Thank you

  Exactly. Recertification could also be made with any of the professional level exams. So if you can prepare for one of these more rapid then the IINS, then you can also take this test. But also if you have passed all four CCNP security, you get only the CCNP Sec certificate when you also pass the screening - which is the 640 - 554 for the CCNA Security.

• GANYMEDE for ASA 5550

  Hello

  How to configure Ganymede for ASA 5550 with acs4.2. I have two asa, one is active and others in mode. pls tell me how to set up. I couldn't find any good docs either.

  Thank you.

  Hi Gavin,

  Here is the sample config for ASA's telnet authentication from Tacacs: username admin password xxxxx privilege 15 aaa-server TEST protocol tacacs+ aaa-server TEST (inside) host x.x.x.x  yyy   [x.x.x.x is the ip address of the tacacs server and is reachable from the inside interface and yyy is the shared secret key.] aaa authentication telnet console TEST LOCAL   [This will send the telnet authentication request to the tacacs server first and if it is not reachable then use the local database of the ASA] aaa authentication ssh console TEST LOCAL    [same as above but for ssh session] aaa authorization exec authentication-server    [this enables exec authorization for the telnet and ssh sessions.] 
  aaa authentication http console TEST LOCAL [for HTTP]
  order of accounting AAA TEST [this helps accountants of the order for all orders entered in the telnet or ssh session.]  On the Ganymede server we need to add this ASA as a RADIUS client with shared secret key yyy.
  
  You can find more details: -.
  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/mgaccess.html#wp1042026
  The GBA, you need to add ASA as device under config network with Protocol Ganymede.
  Thank you
  Vinay
  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
  		   

• Hello, do someone knows if the App Skycure is interesting to use for the security of the iPhone?

  The pp Skycure is interesting to use for the security of the iPhone?

  I doubt it. You need some protection when the computer opened and then install and use a VPN. SaturnVPN is effective and inexpensive.

• Update for Microsoft Security Essentials

  I'm on automatic updates, but we're still request to upgrade to a newer version of Microsoft Security Essentials - this automatically perform automatic updates?

  In these forums, you will find some support for Microsoft Security Essentials: http://social.answers.microsoft.com/Forums/en-US/category/mse ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer is not download the 'important' for vista security updates

  Hello!

  I have problems with the download of the microsoft/windows updates current.  My computer is set to automatically download, but there was a series of 10 "major updates" that I've been prompted to manually download.  However, I get a notice that my computer could not download 5 of these 'important' for vista security updates.  Important security downloads carry reference numbers: KB956744 KB971557 and KB971657, KB973507, KB973540.   Are the other three updates that will not download "update for Windows Vista for x 64-based systems (KB968389)" and "update for the filter of junk mail from Windows Mail for x 64 systems (KB905866).»

  Can someone help me understand how my computer download these updates?

  Thank you

  Hi Brian, confuse

  A good step to start with the recommendation provided by Jos Raymond. In addition to this, you can try to clean boot.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  What version of the operating system you are using (Windows Vista or XP)?

  Please let us know if you see errors or the Windows Update window error codes.

  Has nothing changed on your system just before that this problem has occurred - all new hardware devices installed?  New software or updates installed?

  If you can give us these answers we can help diagnose this problem.

  Meanwhile, I have a few basic steps that you can follow first, we can try to put the computer in a clean boot state and then try to install the updates:

  To do a clean boot, follow the steps below:

  1. Log the computer by using an account with administrator rights.

  2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration Utility.If you are prompted for an administrator password or for confirmation, type your password or click continue.

  3. on the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  4. on the Services tab, select the hide all Microsoft services check box, and then click disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. click OKand then click restart.

  Once the computer restarts, try to install the updates. If you are not able to install, please check for error messages or error codes.

  To restart the computer to a normal startup, follow these steps:

  1. Click on start to reduce this includes this image, type msconfig.exe in the Start Search box and press ENTER. Reduce this includes this imaIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click restart.

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning

  Rehman - Microsoft Support

• Error message "revocation information for the security for this site certificate not available. Do you want? [Yes] [No] [View the certificate]

  For awhile, I got the dialog box with «security alert "revocation information for the security for this site certificate not available.» Do you want? [Yes] [No] [View the certificate] ". » I know that many, if not all, sites are OK because I used them several times in the past.

  I tried different "fixed" found by Google "revocation information" and nothing solves the problem - what is.

  When I try to make various updates, not related to this problem, I can not download updates due to a security problem.

  Suggestions for a computer challenged the user? Thank you.

  Richard

  http://www.brighthub.com/Internet/Security-Privacy/articles/82291.aspx

  read this, see if he can address your question.

• Update for microsoft security essetials KB2804527 (4.2.223.1) installation failure error code: 0x8004FF83 all other updates installed OK

  Update for Microsoft Security Essetials KB2804527 (4.2.223.1) Installation failure error Code: 0x8004FF83 all other updates installed OK.

  What version of Microsoft Security Essentials you run?

  What operating system and service pack?

  Prior security software?

  No matter what security software installed again?

  Please read the following:

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.

  You may need to use a cleaning tool to remove your prior security software:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  The current time and the date now in Ohio, the United States is

  07:28

  Wednesday, February 27, 2013
  UTC - 0500 (EST) Eastern Standard time

  UTC/GMT is 12:28 on Wednesday, February 27, 2013

  Current weather conditions in Columbus

  Cloudy4 ° C / 40 ° F

• So far for the security of Microsoft Essentials Client KB2754296

  I get the 0x8004ff84 error code when you try to install the automatic update Microsoft Security customer KB2754296

  goes on to say: this function is for a net work that is not available.

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Additional references may include:

  Checklist for installation of Microsoft Security Essentials
  http://experts.Windows.com/w/experts_wiki/89.aspx

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

• Definition for Microsoft Security Essentials - (definition 1.129.566.0) KB2310138 update failed to install.

  Definition for Microsoft Security Essentials - (definition 1.129.566.0) KB2310138 update failed to install.

  Hello

  1. Is there an error code or the message that displayed when installation fails?
  2. How you try to install the update? You use the update or you have downloaded the stand-alone pack and tried to install it?
  Check out the link and follow the steps.
  How to manually download the latest Microsoft Security Essentials definition updates
  http://support.Microsoft.com/kb/971606

• Should what software I expect for the security system?

  Hello

  I was wondering what would be the best for the security of the system. When certain programs are installed/uninstalled, they leave some files behind them in the registry. Please, tell me what would be the best for computer to run smoothly and fix it?

  Thank you

  You are welcome. Surf safely and have a day free of malware.

• Error code 0x800706BE update KB2544035 for Microsoft Security Essentials fails to install

  Original title: cannot install KB2544035 with Security Essentials.No method for re - install, then how a new attempt to try to re - install?

  Error code 0 x 800 706BE

  Assuming this is the same computer as in your previous thread, see...

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

  ===========

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse

• For your security, some settings are controlled by group policy

  I want to install Security Essentials.
  I am running XP HOME Edition Service Pack 3 on 2 computers on a network at home for almost a year. I have One Care. When I start the computer their direct initialization on the desktop.
  I know that I don't have the Group Editor and there is no way to get installed it on XP HOME.
  For the last 2 weeks, when I click on Windows Firewall in Control Panel, on two computers, the settings window appears but there a warning on top "for your security, some settings are controlled by group policy" and the selections are grayed out, and the firewall is disabled.
  I have no firewall problem turn on or turn it off in One Care on computers. I've deleted and reinstalled One Care, and even when One Care is removed on both computers I get the same results with Windows Firewall.
  I even replaced the firewall router had to this router.
  Nothing not done, I ran Rgeg priest and anti-Malware.
  I got a response saying to run "mmc", but nothing happens.
  I even spent 5 hours on 2 days with a care that told Finally I must contact support XP and I have had no reports of them support.
  I tried http://windowsxp.mvps.org/resetfwpol.htmon both computers, the Windows Firewall Branch returns to regedit after a reboot and Windows Firewall is still gray.
  I would like to delete One Care and install Security Essentials, but I fear that I can find with no firewall.
  Help, please!

  Mike,
  Me again!
  I removed One Care on both computers, rebooted, installed MSE, rebooted, did a quick auto scan, showed no problems. The Windows Firewall still has the statement "For your security, some settings are controlled by group policy", but the good news is the firewall is on and I can't turn it works!

  Now I can run chkdsk on both computers.

  The Linksys router has SPI Firewall. Should I so on only the SPI Firewall Windows Firewall?

  Furthermore, I run RegClean once a week. Do I need to continue to operate that?

  Don

• Event Viewer view customized for Microsoft Security Essentials

  Hello
  I need assistance in the implementation of a custom view in the event viewer for Microsoft Security Essentials.
  Custom view I have is not the display of log entries.
  Can someone tell me what I did wrong?
  Thank you
  Frank C

  

  I changed the custom source instead of Log view
  I also changed the event ID includes / excludes to instead of a list of specific identification numbers.
  I now get the results of Security Essentials.
  Frank C

• Update definition for Microsoft Security Essentials - KB2310138 $Definition $ 1.147.1446.0

  Update definition for Microsoft Security Essentials - KB2310138 (definition of 1.147.1446.0)

  It could not install

  See...

  • Microsoft Security Essentials: update definitions/Signatures FAQ
    http://answers.Microsoft.com/thread/74e507b8-f6da-4ECA-8CE7-d1aca7d3f1ba

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse