Revision number of WebDAV

Similar Questions

• Tecra S1 - new card system with other revision number

  I need to replace the motherboard on my Tecra S1. My version of original motherboard was V000020670. I had my Tecra S1 for 7 years. Last year my motherboard is dead, and I replaced with a Toshiba motherboard with the same exact version number. Now, it's dead again.

  I found possible replacements with revision numbers: V000020670 (original), as well as V000020020 and V000021100. What is the difference between these versions? It's better to get a 'superior' revision number or to stick to the original version: V000020670?

  More great value digital (V000021100) indicates more progressive revision of Board of Directors of (stable) system?

  Thanks in advance.

  Hello

  To be honest, I think you should ask this question a authorized service provider, they have access to the list of spare parts Toshiba and other useful documents. Here it s only a user to user forum and I think that no one here can tell you that references will agree and will work.

  The Toshiba site, you will find a list of all FSA. Simply contact the guy and ask that they will help you. :)

• In the bar of windows svn revision number

  Hello

  I think about the possibility of putting on the application toolbar (exe) SVN revision number. I would be characteristic of the usueful to quickly assess, what source application, code review is to build in.

  What I need is therefore a kind of trigger/interface that I could use to launch scrap one code that modify the bar of the application window when the application is being built. I thought to prepare the chain using the Exec.vi system (to run the command - st svn.exe to get the information I need). But how is it I can impose on LV to trigger this code only when the build operation starts?

  Or maybe I'll use different approach?

  Hello

  in the build specification, you can run a VI prior to construction.

  So if you know how to find the svn revision number, you can call a vi that change the name of your VI main when you build the exe...

  I think it is the right way! :-)

  Best regards

• "isass.exe system error indicates an encountered or specified revision number is not one known by the service." System does not boot.

  My roommate has downloaded a manual from LG Electronics cell phone in format .pdf (Adobe). The download is complete on Firefox. It double click on the download finished in the 'Download', its pc box became very slow and finally frozen. It is running Windows XP Media since 2004 / 2005.
  When it tried to reboot, the following message appeared...

  "... isass.exe system error indicates an encountered or specified revision number is not one known by the service." Continues it's maybe a more recent revision, then the service is aware of... »

  Then will continually attempt to restart. by a failure. Note the sequence of the events above are as accurate as the harshness.

  Does this mean the registry is damaged?

  Ran Iolo System Mechanic and has been able to run the tests in two (2). One of the physical drive and the other to the integrity of the partition. Nothing helps. A ran Norton recovery and found no errors. Performed a chkdsk /r and no mistake. Ran a chkdsk/p and found errors, but was not fixed. Any suggestions about where to start?

  I would like to thank all those who helped in my installation of Windows 8 Preview of consumer. He didn't find any problems of incompatibility with Norton a few months back and HP support said that the hard drive has been ruined, and I had to buy one of them after receiving the disks to install Win 7 again. Instead, I have used Drive Scrubber from Iolo System Mechanic and installed Win 7 perfectly. I'm now back with Windows 8. ALL of you are awseome!

  Donnie

  Hello

  Try to start in last know good confriguration pressing f8

  http://support.Microsoft.com/kb/307852

• U3014, the last revision number?

  Hello

  Contemplating the purchase of U3014 30 "monitor, I have read about the issues buyers had with revisions before A03 who supposedly fixed these issues. Could I please someone have replied with the current revision number at the moment on this monitor and if all past issues have now been regularized?

  See you soon

  I was hoping that other customers of U3014 would. The last revision I've seen posted here was A04. As for what it does, no idea. These data are provided to us more.

• Help me determine the revision number [Studio 1537]

  Dell Studio 1537 laptop (IE. 2009)

  I'm trying to determine what replacement lid, hinges and the bezel I should order for fix up of my old Studio before I sell it.  I know that I should be able to disassemble and read labels to find out what revision it is, but staff repair Dells exchanged so many parts around during the process when I had sent in their I don't know what are the original parts, or where I could look at to determine what revision number, I would need with the current configuration.  Any advice would be appreciated.  Read on for more details...

  The problem

  The bezel fits the cover properly, but not around the screen.  It covers the bottom edge and one side of the screen by about 1/8 ", although there is a black area exposed on the top edge and the opposite side.  Basically, it seems that the lcd screen is not properly aligned inside the cover, but I removed the bezel to fix it myself to see that the screen is mounded and well aligned.  After some research I remember reading something on the various revisions of the Studio 15 series, using different parts, which are not all compatible between them, but I don't know if the cover is the cause of the problem, or have the bezel bad for this cover... or if these parts are, but the LCD is bad for both.  so the last however-many-years, I lived with the screen out of the Center.

  To add more complications to the problem, I know that there are several other parts changed to a time or an other (see below for details), so cannot be sure that, if necessary, are original.  The only part I feel confident comes from my original CD is the lower cover that has the number of Service and other info stickers on.  It's all a big cover tho, so it could easily had been changed from one unit to another.  So with that taken into account, indeed, I know not what is original and what is not, or what part should I use to find the correct revision number and get the replacement parts for the cover right.

  Any ideas where I could look to find the revision number of right for the parts that are on it now?  My best guess is that I should see exactly what LCD is in it and go from there.  I think that since it is the only part that I want to keep the cover Assembly, so I should try to match everything to her.  I'm pretty sure that any revision of the lid will be attached to the base without problem, but again, I don't know that for sure.  If no indication would be greatly appreciated.

  History

  I had to sent to Dell warranty to correct the anomaly of the hinge that was common with these models of Studio, but when I got back, they put a bunch of parts wrong inside.  The glasses fit properly around the screen, the keyboard was not backlit, the hard drive has been the ability of bad, and they changed the rest-wrists/trackpad "marbled" design that was used on previous models.  I had to send it back to them 3 times, before they managed to return to me with especially good pieces in total.  It is in his possession or in transit to or from, for a total of about 3 months before I finally just gave up.

  During this episode, they even called to say that my motherboard need replaced due to damage fluid and that the USB ports were broken, and that it would cost me ~ $350 to fix because it was due to an abuse of the user, so not covered by the warranty.  The laptop works perfectly when I sent it, other than the hinge, and I knew without doubt that fluid had never been spilled on it, and that the USB ports had never given me any problems.  I had to be very strict with them, that I wanted to just hinge replaced, and that if she didn't start and run when I came back, I was going to throw it in the trash, where it belonged and buy a new one, but another company.  As far as I know, these "problems" were never "fixed".  Needless to say, this is the last product of Dell, I bought.

  But back to the point... Then, when they finally got it back to me with only the evil bezel (or lcd panel, or cover... whatever the cause of the problem), and the different style of the palmrest, I said "close enough" and admitted that if I wanted to use the computer, anytime soon, I have to settle with the best effort of incompetent repair staffs and it was her.  So that the how her since then, but at this point, Ive got a new laptop and I would now like to fix their screw-up if I can sell it without taking a hit to his condition.  And in case you were wondering, Yes, the same hinge is broken in the same way, once again, so I need to correct this defect in the design and get the screen/bezel adapted with a correct alignment.  Covers a bit scuffed, so I thought I would buy just a set cover so it is good condition for sale.

  Thank you for taking the time to read and for all the advice

  Okay, so I got parts, and all is right with the world again. Haha. I spent less than $ 20 on a brand-new couvercle lid with hinges, buttons power WLAN, antennas and a new scope.  I had to share my webcam and small green card that defines along the lower part of the cover.  Bezel fits my screen.  Actually ended up getting a cover of art 'Algae' instead of the plain of black or color... the covers of art were actually the cheapest option.  Parts from eBay.

  So here's the rub:. It turns out that the revision number is not relevant.  The items are sorted by part number (P/N), and apparently they used slightly different parts from one year to the other, at least for some parts. Judging from my experience, I would say anyone who attempted to repair game p/n with the same series as you have currently ensure the good editing.

  My 1537 takes a lid of the P600X series (original was P613X, black; replacement is P602X, algae).  Although it looks like any cover would fit, I noticed that the antenna leads on other series were in front of the yew, mine. They were grouped in the same pair, just ran into the lid on opposite sides. It seems that the antenna could possibly be traded around to match the original, but I can't say for sure. It is also possible that the son would still be able to be channelled through the computer and connected to network for both cards, but once again, it is purely speculation on my part.

  The bezel seems to vary depending on what LCD is equipped.  Apparently, there was at least 2 variations, a CFL and LED, backlight as well as changes in the proportions (not sure if these changes are correlated with the backlight, or if these are yet another set of alternatives to consider, as I was not to replace the LCD screen).  From what I understand they have connectors that are different, based on the backlight.  I think mine uses the latest LED backlight, but still once, don't look too far in the screens, it is just the impression I got, and assumes that it is the original Panel, and that Dell did not change with other variants.

  As the bezel, it seems to be the series a bit out there. The injector suitable for my laptop is M135C, although Dell had replaced the original by a M138C, which covers the bottom and left edges of the screen while exposing a black area of the outter screens on the top and side edges straight. The differences are very difficult to detect without having them both in hand to compare, choose different parties based on their appearance is not the way to go.

  Therefore, in summary, I believe that the combination is for my 1537...

  COVER: P600X series

  : LED backlighting

  BEZEL: M135C

• Automate the plugin revision number.

  Hi all

  I have a simple request. All I want to do is automate the revision number of the .aip generated.

  For all samples, published in the SDK, it is defined in the sdkdef.h. But it is static!

  Revision of foreach, this number must be changed manually.

  My wish is that this number will be incremented automatically with each compilation.

  Anyone know how to do?

  Best regards

  Thomas

  OK, how I realized that is a little awkward but it sort of market.  It is also specific XCode, so I assume you are using a Mac.

  In fact, I created my own project template for XCode plugin Illustrator for this which includes my own version of SDKDef.h with a slightly different name.  The advantage of this is that you can change your revision number without affecting the other plug-ins based on the SDK.  Creating project templates is fairly powerful and easy process in XCode, there are some links below on how to do.

  Bottom line is, you need to modify the SDKDef.h file or create your own and point your project.  If it's just an a stop then you can ignore the project template stuff.

  Lets assume, you have created your own SDKDef.h file, called MYSDKDef.h and place it in the folder ./source/ of the project folder of your plugin.

  In XCode, change the configuration of your project settings and change the prefix the preprocessor Info.plist file to point to your new file: ./Source/MYSDKDef.h (it has initially been something like common/includes/SDKDef.h)

  You will also need to add a new Phase of construction to your target, then right-click on your target and choose Add--> new Phase Build-> new step run Script Build. You'll want to add your new construction phase after phase of copying headers and front Sources to compile phase.

  Now, I created a perl script to actually change the revision number in the file, but you might as well use a script bash or some other scripting language. The main thing to do is to change the kSDKDefAIBuildNumber, the kSDKDefAIMinorVersionNum, the kSDKDefAIMajorVersionNum or the kSDKDefAIRevisionVersionNum, but you already know this.

  So you can either paste your script into the box in the new window run Script Build Phase of information or you can save your script to a file and run it from there, I chose the latter for my phase of compilation looks like this:

  Perl ' $PROJECT_DIR/UpdateVersion.pl ""$PROJECT_DIR/Source/MYSDKDef.h"$AI_CONFIGURATION $PROJECTNAME

  As you can see, I am passing the parameters in my script.

  $AI_CONFIGURATION = debug/Release
  

  $PROJECT_DIR =

  $PROJECTNAME = the name of your project

  My perl script does nothing if $AI_CONFIGURATION is "Debug".

  I'm sure there are better ways to do it, but it works for me.

  Create XCode project templates:

  http://BRIKSOFTWARE.com/blog/?p=28

• G62-340US: identify the revision number of the laptop (1.0, 1.1, 1.2)

  Hi all!

  Like many people here, I plan on upgrading my CPU to AMD bicoeur to an AMD quad-core processor. The problem is when I turn to my manual, it says that some processors are only for 1.0 and 1.1, 1.1, and 1.2, models etc.. What I found, we can identify their model by looking for their warranty date or their computers 'date of birth '; However, I have a computer that is restored to nine, so I don't know if this has changed the warranty, so HP updated the orignial parties when he left the 2nd factory, etc. My warranty (as shown in my BIOS) started on 07/07/11 and ends on 04/10/11. Can someone help me identify the revision of my model number?

  

  Hi @Apolinar4840,

  Thanks for the info requested and I am happy to help you!

  According to the manual, part number 616343-001, Chapter 4, page 85. the processor P340 is only for models 1.1.

  Compaq Presario CQ62 Notebook PC laptop HP G62 Notebook PC Maintenance and Service guide.

  Your must be version 1.1.

  Good luck!

• Revisional Subversion: want the same revision number for the entire project tree

  Hi... currently I use oracle JDeveloper 11.1.1.2.0 with Subversion and VisualSVN Server.
  I created the user repository. .. .but after change assumes that EmployeeEO.xml its showing 2-3 after validation and after that revision engage DepartmentEO.xml his display 4... OK
  but when I go to new new copy i.e.checkout his watch do not total copy with the same number of revision for all files... pls I want the same number of revision for all files...

  User555,

  Please note: what you see is correct. Subversion is not CVS; It works the same way. The behavior you are seeing is the way Subversion works, and there's nothing that related to JDeveloper - you can see the same behavior by using the SVN command line client.

  I suggest you have a reading of http://svnbook.red-bean.com/ (especially the http://svnbook.red-bean.com/en/1.5/svn.basic.in-action.html#svn.basic.in-action.mixedrevs that describes how new users are often confused by mixed revisions).

  I quote a phrase of this document for you:

  Mixed revisions are normal

  John

• Motherboard revision number

  I have a HP Media Center m7160n machine with a motherboard #P5LP - 1.04 rev.  The Board is bad and needs to be replaced.  I have to use the exact same revision # as well as the model?    Thank you.

  (1) assuming that the Board of Directors is tattooed, means I have to go through HP to get a replacement?

  Your original plate is tattooed and any replacement must also be tattooed to use recovery disks. You can access a motherboard of anyone, but the tattoo is usually done by HP or an authorized service center. If you have no plan to use recovery disks, there is no need to have tattooed replacement.

  (2) a few years ago, I improved the installed at the factory to Win7 WinXP.  This has no effect on the behavior/operation of the motherboard and BIOS, especially if you change the Group on?  Or are you saying that I just won't use the HP Recovery disk in an emergency situation?  If this is the case, then the tattoo not would matter, right (as I would never have cause to use this recovery option)?

  If you change the motherboard, you will not have the use of your HP WinXP recovery disks. If you plan to use Windows 7, the use of recovery discs the HP is not relevant. And correct, the tattoo would not matter that you would have no need for the HP recovery discs.

  With regard to the motherboard to do... Emery, limestone, Lithium, Lithium2, Leucite and Leucite3 everything should work with your factory current Socket 775 PentiumD 820 (Smithfield) CPU Dual-Core 2.8 GHz (800 MHz front side bus). If you want to want to leave a little room for a CPU upgrade, consider the Leonite who takes in charge the following processors;

  Core 2 Duo E6x00
  Core 2 Duo E4x00
  Dual Core Pentium D 9 x 0
  Pentium D 8xx Dual Core
  Pentium 4 series of 6 x 1
  Celeron D 3xx series

  You can also consider some motherboards non - OEM no HP who take in charge the memory and the CPU in your system.

  Please send BRAVO

• "To hardcode ini file settings" or "number of automatic review with the turtle."

  Hi all

  We use a SVN repository with Tortoise here in our company for version control.

  I would like to get the revision number hardcoded in the Application (.exe version).

  I have already discovered, that there is a tool that can scan a directory and replaces a constant string in a file with the current revision number.

  (So I could automatically generate a file .ini with "Ver =... RevNr' as content)

  But I have no idea, how I can hard code a file in the application with the labview generator.

  (I think something like the .ico file, which is hardcoded in the application too)

  Someone has a sollution for this?

  Thank you

  Mario Hirth

  Hi Mario,.

  Take a look at the VI in LabVIEW 8.2.1 attached, I quickly dug it in my system.

  On the "software version VI" there must be a command group named 'Build Version Start' this type of matches the cluster 'Version to build' on the attached VI.

  If you run your VI to know what revision etc number you want, and then input that data of the default_some_version_info.vi as well as a reference for your version of VI.

  Keep in mind that you can do something else in the developmet environment at the time of execution env.

  Danny

• Revision history and the recovery of old revisions

  I currently use the revision of history 'ask comments when recording' option (very nice, I must say). LabVIEW automagically save a VI with the revision number in the file name? In this way, I'm going to have many, many screws saved so I can go back to one of them if I need to?

  In addition, if such an option IS available, is it 'smart' so that all dependencies are automatically updated to the latest revision?

  I guess I'm looking for better control of versions, something more as the projects and programs that focus on the text.

  I want to be able to do this without having to go through the process of: file-> save under...-> copy: copy of substitute for Original-> add name of file revision number.

  Thank you

  Dennis is right about the use of source code control.  I use Visual Sourcesafe (VSS), and she is pretty good with Labview interface.  I hear that necessarily both interfaces.  In Labview, it is a Source code control option in the Tools menu.  From there, you can add files to your source control database.  Alternatively, you can check files in and out.  This will do exactly what you want to do, save older versions of screws, without having a ton of screws renamed on your hard drive.  You have the ability to get any version you want at any time.  Source code control does much more than that, but I don't want to get into all the details here.  You should look into getting the source control software.

• VTP (revision numbers) and a client not getting updates

  Hello.

  I screwed up somewhere along the line one of our switches (3750 x). Once they have been set up at last about 6 months ago we have never touched them again.

  I noticed yesterday when I created a new vlan was not get populated at one of our switches. For some reason, I didn't notice that the domain name on the switch are not updates was not our area.

  So I switched the domain on this switch for the appropriate field and he still shows no updates and also has a revision # 7.

  So now this switch I then unplugged all the ports in the trunk and not "transparent" vtp mode Then, I turned it to "vtp client mode vlan.
  He has always shown the revision 7.

  So I tried 'false vtp domain' and 'transparent vtp mode' and then 'vtp domain mydomain' and ' vtp client mode vlan.
  He has always shown the revision 7.

  So I tried 'false vtp domain' and ' vtp mode vlan transparent ' and then 'vtp domain mydomain' and ' vtp client mode vlan.
  He has always shown the revision 7.

  I am at a loss on how to solve this problem, other than the reconstruction of the switch. I have a server vtp revision 10 and two other switches also in revision 10 who receive updates from the vtp server. Has only one switch.  Please note that this pass it is not working at one time done since there all the VLAN, that we have created on our initial installation.

  -Thank you

  GOOD switch
  Status of vtp GOODSWITCH #show
  VTP Version: 1 to 3
  Running VTP version: 3
  VTP domain: mydomain
  VTP milling Mode: Disabled
  VTP traps generation: disabled
  Device ID: 7426.acad.de00

  Function VLAN:
  --------------
  VTP, operating Mode: Client
  Number of existing VLAN: 15
  Number of existing extended VLAN: 6
  VLAN maximum supported locally: 1005
  Review of configuration: 10
  Main ID: b838.61aa.5880
  Main description: lab-Office
  MD5 summary: 0xB8 0x3E 0x2C 0xB7 0 x 85 0xB5 0x5D 0xA6
  0x4A 0x4E 0xFC 0x5E 0x5A 0xA1 0xAF 0xCC

  MST functionality:
  --------------
  VTP, operating Mode: Transparent

  UNKNOWN entity:
  --------------
  VTP, operating Mode: Transparent

  BAD switch
  Status of vtp BADSWITCH #show
  VTP Version: 1 to 3
  Running VTP version: 3
  VTP domain: mydomain
  VTP milling Mode: Disabled
  VTP traps generation: disabled
  Device ID: 7426.acad.ee80

  Function VLAN:
  --------------
  VTP, operating Mode: Client
  Number of existing VLANs: 12
  Number of existing extended VLAN: 6
  VLAN maximum supported locally: 1005
  Review of configuration: 7
  Main ID: b000.b4b0.f200
  Main description: lab-Office
  MD5 summary: 0x7A 0x5C 0x2E 05 0xF2 0 x 0 x 80 0x6F 0x2F
  0x4E 0xE1 0 x 34 0x07 0 x 01 0x7F 0xB9 0x2B

  MST functionality:
  --------------
  VTP, operating Mode: Transparent

  UNKNOWN entity:
  --------------
  VTP, operating Mode: Transparent

  Hello

  Just to clarify the current VTP server running version 3 and is currently promoted a primary vtp?

  All other customers, even one who does not get the DB synchronized are vtp running all 3?

  Have you tried to force the exisitng vtp primary server again?

  main #vtp

  Please note the following

  If you change the domain vtp3 name AFTER the promotion of the switch to a server then you will need to re-do the promotion again

  :
  Vtp3 Server (promoted to a primary can ONLY change vtp database)
  Primary by vtp domain only vtp

  Any other vtp Server 3 can not change vtp database unless that his promotion to primary derivative (either by force or verification of the other vtp 3 switches (Server/full)

  Add vtp 3 switch as a customer
  --------------------------------------------------------
  1. choose switch to become a customer of vtp 3 (it kerchaoui the revision number is 0 (at bottom transparent change for the customer))
  2. change vtp worm 3 (a joint it will start a synchronization of the vtp DB switched to that of the new vtp3 priamry Server vtp D/B - as long as the Domain password are the same)
  3. change the hidden password (optonal)

  Connected to the network.

  RES

  Paul

• How to register multiple files with the same name with different num revision

  Hello
  
  Can someone please tell me, how to register several different files with the same name with the revision number using the RIDC API.
  
  For example:
  First of all I will be saved in a file (TestFile.txt) in a content server with revision number 1 using the RIDC API in application of the ADF. Then after awhile, will change the same line (TestFile.txt) check-in and once again. I tried to check the same file several times, however first Check-in correctly in server showing revision 1, so that Check-in same file again, her gives no error message, and also its not reflecting only not to the server. Single file (TestFile.txt) reflecting on the server.
  
  How to implement this feature using the RIDC API? Any suggestions would be helpful.
  
  Concerning
  REDA
  
  Published by: 887680 on March 6, 2013 10:48

  (1) get the content ID (dDocName), call CHECKOUT_BY_NAME
  (2) call check-in service with dRevLabel = previous dRevlabel + 1

• How to automatically add the version number in the javadoc

  Can JDeveloper add automatically the version number to the javadoc for all project files comments when we commit the code to a repository, say SVN? Is it possible to do? Thank you.

  Hello

  JDeveloper, does not, but can of Subversion. You can use the special keyword ($Rev$) in your javadoc comment and then configure the properties subversion so that SVN which will replace with the revision number when you commit your changes. [url http://svnbook.red-bean.com/en/1.4/svn.advanced.props.special.keywords.html] The docs for Subversion explain how to do this.

  John