RH7 crashing on the new project

Similar Questions

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• Don't see Blackberry point in the new project in VS2008

  Hello

  Here are a few of my machine:

  OS: WinXP Sp2

  VS2008 9.0.21022.8 RTM

  I install vs_plugin.31.exe and BlackBerry Widget SDK Beta 3. MSI. But there is no element of Blackberry in the section of the new project. I watch the video and see that they create the web project there.

  I tried to run a sample as gear of the section of the sample site, but it takes about 15 minutes to show the Simulator and nothing happens except the main screen of the Phone Simulator.

  Help, please...

  Thank you.

  Hello

  Please make sure you have Service Pack 1 installed for Visual Studio.

  In Visual Studio, select 'About' from the Help menu.  You should be able to confirm that the BlackBerry Web plug-in has been implemented correctly, and if SP1 has been installed for the .NET Framework:

  

  If everything is configured correctly, you should see the project type "BlackBerry" should be included in the left panel of the new project window, and when you select it, you should see the type of project 'BlackBerry Widget' on the right:

  

  Best wishes

  Adam

• transfer budget, fresh from the old project to the new project

  Hi all

  We cannot remove the subtasks that there are expenditures high on these tasks. IAM so plan to create a new project with budgetary imputation etc and transfer transactions from the old project to the new project.

  Can someone help me how to move the transactions from the old to the new.

  Thank you very much.

  OK thanks Neeta

• Monitor project and timeline window titles do not appear in the new project?

  The sequence program monitor and timeline sequence 01 does not appear on the opening of the new project, eventhough checked in the Windows space.

  All existing projects are showing the correct disposal and can be used, but I can not activate a new project except import clips into the project window.

  Any help would be appreciated.

  Operating system is 64 bit i7 and program CS5.5.2 Premiere Pro.

  Is to say, the space is there but no info that is to say, lines, titles etc. of chronology to insert clips or display in the monitor?

  Post edited by: Bob ten photographer

  Simply create the timeline (sequence) of one of your clips. In this way, it's a perfect match.

• Unable to create the new project Windows Digital Image in 2006.

  Original title: Digital Image 2006 Windows?

  My operating system is Windows XP SP3.  I have installed Windows Digital Image 2006 but when I clicked on "create a new project" he has opened with a page containing a red X, calendar, frog and a butterfly, and I was unable to go further.  It is a good editing software, but I would like to be able to use all the facilities.

  If someone familiar with this program, please indicate what could be the problem and how I might be able to correct even.

  Thank you.

  Look at the link here because it says Microsoft Digital Image 2006 is not compatible with Windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Windows%20Digital%20Image%202006

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Thank you

  Marilyn

• [ubuntu] No API found level. The new project wizard requires a level API to go forward.

  Hi all

  I run into a problem when you create a new project of stunts on the new ndk 10.2 released. As soon as I get to the level of the API, it says that not installed, but all are (10.0, 10.1, 10.2).

  

  

  I am running:

  Distributor ID: Ubuntu
  Description: Ubuntu LTS 12.04.2
  News Release: 12.04
  Codename: precise

  QNX Momentics® IDE for BlackBerry® 10 native SDK

  Version: 10.2.1
  Build id: v201308081807

  If someone has encountered this problem or knows a solution, please let me know. any help is appreciated.

  Thanks in advance,

  ampz9

  Solved by uninstalling the ndk (once more that I had tried several times) and instead of setting up the wizard, I downloaded the API level when creating my project of bb...

• Unable to create the new project for the new society without existing systems

  I'm unable to create a new project for a new society.   There is no existing systems, and I can't go beyond the selection screen.  I first put in place a new collector, registration of the database and start collections?  Or y at - there a step I'm missing?

  I found my problem.  I've been using Firefox.  This works fine in IE.  Problem solved.

• How to import an existing in the new project folder

  Hello

  I start to use Dreamweaver as my site Web SDK software development. My question is: How can I import an existing folder that contains html, javascripts and CSS pages as a new project?

  I searched everywhere but didn't see the opportunity to do so.

  See you soon,.

  You don't need to drag and drop files. You just need to set the site in DW site manager. In site settings, you point to the folder on your local disk that contains the files under the root of your site.

• Compiled CHM file does not reflect the name of the new project

  I have read many responses of experts to positions and have found them extremely useful is. However, I have not seen one that solves my problem.

  I have the HTML HR RH8 Version. I renamed a project through 1) file - rename project and 2) Single Source Layouts - main Layout - Properties - output folder and file name.

  Two problems are: 1) the name of the project file still reflects the old name of project and 2) the CHM file still reflects the old name of the project.

  Therefore, the output help the user displays a still the former name of the project in the title bar.

  Generated files like the RoboHelpHTML project file have been changed for the new name of the project, just like RENAME the PROJECTS using says it should. However, the CHM file does not reflect the new name of the project as it says it should.

  (1) can I change the name of the folder created when I compiled the help by exact name file?

  (2) can I change the FILE name in the window SELECT OUTPUT FOLDER AND FILE name?

  (3) I can / should I rename the names of table of contents and Index of the old project name for the new name of the project? (Help says changing the project name does not change these file names and he didn't.)

  None of these measures will correct the problem? I appreciate any help you can give.

  Welcome to our community

  Try file > project settings.

  And if that fails, try the pod project configuration, windows and change the caption of the window.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Import AE sequences to the new project

  Hello

  I am new to AE but love already.  Because our process of approval here is so heavy, I create various short projects and exporting .mov sequences.

  I then import the footage into a new project and using an overview of logo to the transition.  So far, there has been work and here's what I have so far:

  http://cpso2.gallaudet.edu/cpso/PST/combined_sequence_01. MOV

  My question is - is there a better way to do using AE how I use it (import of ready sequences - made.move)?  Other professionals use AE in this way?

  All advice or tips are appreciated.

  Thank you - guys deaf

  The simplest way for you would be to have a composition for each "small project" in After Effects, then select all and drag the new button on the comp on the Project Panel to create a composition of nesting all.

  You can get more info on the nesting & precomposition here.

  This workflow, you can individually make all the little project for the revision of the process and make the full version as soon as everything is greenlighted by your boss or your client without work.

• options of workflow while creating the new project type

  Hey Dina,
  
  I have a doubt on below 2 options that are available in the "Project status, Workflow" tab while creating a new project type.
  
  Activate the workflow for projects
  Activate the workflow for Budgets
  
  Could you explain what what will be the exact flow of two work above, impact if we allow them when creating new project type.
  
  Thanks in advance,
  RPD

  Hello

  These two options will affect any new project created using the type of project you are developing.
  For example, you create a project type called "Capital Construction Projects", designated for individual projects that will be created when your company began construction of a new factory or office, for its own operations.
  For this type of project, you can enable the flow of project work and budgets.

  Later business user creates a new project of this type, for the construction of offices for a new Department, he or she will submit the project for approval. By using the workflow your company would install rules so that system knows which should be the approver of this creation of project, or later, any change in the status of the project.
  Once that project was created the business user need to budget for the expected costs of this investment. Another workflow is now used to submit the budget for approval.

  If unnecessary business rules a formal process for approval of two state changes of project or the base line of the budget of the project, then you need not enable these options for the type of project.

  Dina

• Portege 3500: OS crashes after the new HARD drive update

  I have a problem with the new hard drive - Seagate Momentus 100 GB 7200 rpm, ATA - and...
  instalator blue screen starts normally (from recovery CD or OEM CD) and when partitioning is startis - system is stopped...

  HARD drive is ok - tested on another laptop
  Laptop is ok? instalator and works windows, tested on 2 HDD (40 and 60 GB, two IBM)

  It is possible, that this new hard drive is not compatybille with this laptop?

  Please help, because it's my boss laptop :(

  P.S. - sorry for peut English

  Hello

  Are you sure that the HARD drive is recognized correctly in the BIOS?
  Seems that the laptop does not support the new drive (100 GB, 7200 RPM).

  Perhaps because of the large size of HARD drive and the fast rotation value.
  I would try to use a 60GB 5400 RPM a 80 GB HARD drive maybe works but it seems that the 100 GB HARD drive is not compatible

• iBooks crashing on the new iPhone 6 sec more

  I just upgraded from my iPhone 5S for a further 6 s. improved to 9.1, and everything is looking good EXECPT that iBooks leaves everytime I open a book and even when I'm looking at my list of books and have not yet selected a...

  Tests I've done:

  -force quit all applications

  -iBookstore vs home made (iBooks author) books

  -WiFi off

  -data cell iBooks out

  -Phone off then on again

  -Phone restarted

  -Downloaded a new book

  -Go straight to the store once launched the app

  Normally, my next step would be to remove the app and redownload, but iBooks is now installed with the operating system, there is no x to delete the application.

  The main reason that I went to the largest phone was because of the way that lots of reading I was doing on children 5 years old, so it is an important for me!

  Your thoughts of value...

  Hey Chris bolt,

  If I understand correctly, an application that is preinstalled on the OS crashes whenever you try to open it. Normally, we would like to uninstall and reinstall the application. Looks like you already have a troubleshooting. I recommend you to read this article, it may be able to help solve the problem.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Thank you for using communities of Apple Support.
  Have a good.

• Creative Cloud Desktop App crashes on the new Mac Pro 2013

  After you use the Migration Wizard to move the apps of my MBP 2010 of a new Mac Pro 6.1 (OSX 10.9.1), I find that the designer Cloud Desktop App constantly just crashes after entering my username and password (it is started as a menu point bar or separate window).  I uninstalled and reinstalled several times with the same result.  Here's a partial crashdump (I have the complete list available):

  Process: Creative cloud [541]

  Path: / Applications/Utilities/Adobe Creative Cloud / * / Creative Cloud.app/Contents/MacOS/Creative Cloud

  ID: com.adobe.acc.AdobeCreativeCloud

  Version: 1.4.0.348 (?)

  Code type: X 86 (native)

  Parent process: launchd [159]

  Responsible for: Creative cloud [541]

  User ID: 501

  Date/time: 2014-02-12 09:01:44.196-0500

  OS version: Mac OS X 10.9.1 (B 13, 4116)

  Report Version: 11

  Anonymous UUID: 62963EDC-D8F8-8862-AD7C-BC6179E3E2DC

  Crashed thread: 31

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  "Reason for termination due to an untrapped exception"NSInvalidArgumentException"app,: ' *-[NSXMLDocument initWithXMLString:options:error:]: argument zero"

  the problem is caused by 'migration' of your adobe applications rather than install them correctly.

  Uninstall everything that you can run the cleaner and try again correctly installed: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html