Right-click to play?

Similar Questions

• When playing VLC media player it take about 20 to 30 seconds to open. When I push a right-click take about 3-5 seconds to open, why the difference?

  original title: on laptop
  I have a computer dell laptop (N4050). My lappi work slowly, when you play it take about 20 to 30 seconds to open the VLC media player. When I push right click it take about 3-5 seconds to open.
  so. Mr President, give me the solution to my problem.

  Hello

  1. which version of the operating system is installed?

  2. is the VLC media player-specific question?

  Try the following steps.

  Clean boot the computer and then try to open the VLC media player. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Reference:

  Optimize Windows 7 for better performance: http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx

  I hope this helps.

• Why don't "play to" appear in the menu when I right click a folder of photo

  For a year or two I was streaming photos from my computer to our Sony TV.  This evening "play to" show up in the menu when I right click a folder picture.  I checked the TV is on the network, and I went through all the homegroup and sharing option routines.  Without checking that all media on my computer can be listened to, etc.  You would be grateful for the help.

  Thank you
  try restarting your router and restart the computer. Check the TV menu that
  the TV has a valid IP address. Make sure they are on the same network.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Right click to problems while playing Dota 2, please help.

  Separated from this thread.

  I have / had the same problem that I haven't played since May because of this. I couldn't find a solution. Did you ever fix it? I just tried to uninstall steam and reinstalled it and DOTA 2, maybe it'll work. I thought it had something to do with me upgrade to Windows 8.1 but I've seen on other forums of discussion where people have no problems with DOTA and Windows 8

  Hi Sam,

  Please provide us with the following information so that we can help you further the question:

  1. What is the brand and model of the computer?
  2. The question is specific to the game DOTA 2 or you experience this problem when you use Windows?

  Have you tried the steps in Aïssa B Ganesh of the next post on May 26,2013:

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/right-click-problems-while-playing-DotA-2-Please/afb94ea2-5a89-48f4-B195-59d6eafee732

  If this isn't the case, please try and see if it helps.

  You can also run the troubleshooter to fix the problem, follow these steps to run the troubleshooter of material:

  1. Press Windows + C keys on your keyboard to show the charms.
  2. Troubleshooting type, and then click Troubleshooting under settings.
  3. Now, type Hardware Troubleshooter in the search option.
  4. Click the hardware store to run the troubleshooter.

  Hope this helps, get back to us if you need further assistance for Windows.

• How to disable the click to play bar?

  I like to use click to play, but the bar request annoys me (see the screenshot of the first).
  Is it possible to disable this I simply select an option if I want, through the button at the top right corner (see the second screenshot)?

  Hi Mr.Yeah, you can try this addon: https://addons.mozilla.org/firefox/addon/hide-plugin-notifications/

• Right click on the link open in a new tab won't open

  After the upgrade to the new version, 27.0.1, my function right click to open the link in a new tab stopped working. I can not open in a new window either. When I click on the link that I would like to open in new tab or window, the right-click window appears, I click on the function desired and closed the window right click and nothing happens.

  I also noticed that there are many additional functions that now appear in the window right click, for example.

  Play, Pause, Mute, turn on the microphone, etc..
  Image of reloading, see the Image, video, etc.
  This frame, view selection Source, etc.

  They could have been there, but I don't remember these features before. They could, BUT it is perhaps the case of not really noticing them because everything worked and now that I can't open new tabs/windows, I now notice them. Not sure if this is related to the issue or not.
  I have the following extensions running:

  ColorZilla 2.6.4.1
  Dictionary.com 2.0.0
  Firebug 1.8.4
  InstantFox 2.8.7

  I turn them off to see if they caused the problem, but the problem persists.

  I hope someone can understand this because maybe I need to spend some browsers until this is resolved. Unfortunately not too effective!

  Thank you!

  In fact, the issue re-emerged so I upgraded Firebug and it worked, but it seems that Firebug was the question.

• version 12.4 no right click the option of reading

  As long as I can remember, while a song is being played in iTunes, I could select right-click on another song and play the new selected song immediately.  With version 12.4, that I don't see that I can do it longer.  When I select and right click on a different song than the one that plays, the first option is play then, which adds to a next up what... the option play next is followed by the rest of regular options below. Where does the 'game' now option will, and WHY would it disappear?

  I use iTunes on my PC of Windows 10.  Thanks for any help, Paul

  version 12.4 is below, followed by 12.1 with option 'Play '.

  

  

  Yes, its been removed and very boring it's too.  I have no obligation to use the 'read next' feature, and the other options to launch the game 12.4 are simply not as simple as convenient as right click > play.  Comments of the Apple iTunes pageallows to suggest that this must be restored.

• By selecting 'Open in a new tab' right-click menu does nothing

  I just updated to firefox 24 on OXS. The right click menu now is meaningless.

  When I right click on a web link, and select 'Open in new tab', nothing happens. No tab opens.

  However, I see now countless options irrelevant for that link, such as 'copy the audio location', 'copy the location of the image', 'play', 'pause', etc., when the article I have clicking on is not an image, audio, video or any other type of media. The content of the right click menu is now longer than my entire screen, completely out of place for the link I'm clicking on and the only option that is relevant does nothing.

  How can I fix?

  I had the same problem. I found that disable Firebug in my Extensions menu solved the problem, so when I right click it appears the menu of standard options rather than the new options 100 or so which do not apply.

  If you have installed too much Firebug, you might want to give this a shot. I have not upgraded my Firebug in no time so it might be a problem with running an older version of it.

  Hope that helps

• How can I make my short right click again?

  Before, when I used to right click anything (be it to copy, URL link, etc.), the right click menu would be short with a few options, such as cut, copy, past, reloading, view background information, etc.

  But today, when I right click something, I still get the annoying long right-click menu which has many options of ridiculous, like 'save the snapshot as', play, make a pause, silence, reactivate, show controls, hide (and maybe more 20 more).

  I do not like that and not my contextual menu bar short. How can I do so?

  Problems with a massive menu have been reported as posed by Firebug, so make sure you update to the latest version of Firebug.

• Firefox displays all possible options in the menu contextual (right-click)

  Hello
  A few hours previously, firefox itself has upgrade the new version, 20.0.
  After the reboot, it seems that everything works fine. But when I right click to display the context menu (and copy the location of the image), I saw a long list with options like 'Pause', 'Play', 'Mute' and so on.

  Here is a picture:
  http://2imgs.com/2I/i/515c6224/79903d27bae38742936c6eea68084f43/d1af1c36e5.f.PNG

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

• cannot cut a right click and paste

  I play farmville and I want to be able to right-click on a mystery egg and copy and paste the addy in my IM and send it to friends on my game. When I click right I do not get this option. I do not know how to tackle this someone has an idea how to activate the right click to copy or cut and paste for this? I've also tried CNTL C and V no good...

  Hi shelikesink421,

  Farmville using flash player and flash player you do not have the ability to save the image on your computer and therefore, he will not be able to do.
  However you may need to contact the support of face book to check if you can do

  The site probably cannot give you permission to copy and paste on your messenger.

  Have you tried other websites? If so, what was the result?

  Try to copy it to the desktop and check what's happening?

  If successful, copy it from the office and try to paste on your messenger.

  Try right click on the egg that you mentioned, copy and paste it on your messenger instead of Ctrl + c and Ctrl + v.

  Aziz Nadeem - Microsoft Support

• WMP 11 crashes when right click on the application

  WMP 11 crashes when I right click any where on the screen of the application or you are trying to click on tools or view, among many other things. I'm trying to get the list pane to see the and if I click on playing, and the drop nothing appears. usually crashes right after that as well. Please help, I can't find anything about it!

  so, I thought about it! for anyone else who has this problem - I hope that this saving you countless hours of frustration, I've experienced...

  -J' restored wmp version 9

  -J' completely deleted all system files and applications to version 11

  -J' rebooted my computer and reinstalled version 11

  -for some reason, it works! :)

  This may seem very simple, but I've tried so many different configurations and random ideas that I'm frankly surprised, it worked! Hope this helps someone else.

• Almost every time that I do a right-click to display a menu to do something such as delete or copy, the following error message appears: program internal error:.\Src\IntegrationToolsHolder.cpp,21

  Original title: internal program Errror

  I use XP Professional 32-bit.

  Almost every time that I do a right-click to display a menu of something for example delete or copy, you receive the following error message.

  Program internal error:.\Src\IntegrationToolsHolder.cpp,21

  If I click OK on the error message, it goes & I can then right click New & the appropriate menu appears and works correctly.

  Any ideas, please, as to what is the cause?

  Kind regards

  I told you I want to talk to you soon as you try these things.

  How to boot in Safe Mode and Clean worked for you?  Not at all useful?

  You said about this 2 weeks ago?

  Yet once, I fell in this place and the time and effort wasted because MS Answers forums invite to no system information when a new question is asked - but I digress.

  Update of security 908513 is included in Service Pack 3 update.

  Since forums MS Answers asks you any information from system when a new question is asked, we don't even know what Service Pack you have.  If you have SP3, you already have the update.  Two weeks and we don't know what is your Service Pack, what is your antivirus/antimalware environment...  We know that you have XP Pro 32-bit however.

  What you're likely to have is an extension of the Explorer Shell with a malfunction, and you can usually understand as follows:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  If you can really achieve almost everytime you do a right-click and choose something like delete or copy, you're well on your way to understand.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success about the errors with the extension and to what other people have done on it... Maybe just to get an update of the program that adds the suspicious extension.

  You can Google something like:

  Explorer XP crashing

  (you must complete your suspect on behalf of add on)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately turned off, to disable an extension does not require a restart, but if you find the problem, I reboot and retest in all cases to be sure that the problem has disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• Windows Media Player 11 - right click "Add/enqueue" option missing - cannot load the contents of the folder

  Hello

  Windows Media Player 11.0.6002.18005 for my Vista 64-bit system worked very well for me.  I could right click on any folder containing my Mp3 files and select 'Add to the reader' or 'enqueue' and it would then open and read my files that are in the folder.

  However, for some reason this right click on the option is now missing from my right click menu.

  Someone knows how to fix this?

  Thank you!

  Alright!

  It's a simple solution... I had apparently made a universal change to display the parameters of the files from my Vista, and it removed the 'Music Details' option in the combo box with area to "Customize" options files in the properties...

  I just changed the "Music Details" option for the kind of file, I want it to be... and voila!  .. "Add to Windows Media Player play list" and "Play with Windows Media Player" options are available again for me via a right-click on these files.

  W000t.

• Windows Explorer error when right clicking

  When the right click on Windows Explorer stops immediately with the following message «windows explorer has stopped working, please wait while searching for a solution»
  Program stops & is able to be retired manually.
  Checking for malware & virus - clean

  Advice please

  Mal_UK

  Hello

  The convenience store right click above should be your main idea, however sometimes these questions
  have several factors in play, then use the below if necessary, and it would not hurt to apply these anyway.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.